w d used for sale

Dimensions (L/W/H): 1200x1100x1160 mm Weight: 950 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Wassmer surface grinding machine for the pre-grinding process in brick production is available. Stages: 1, wheel diameter: 700mm, feed speed: approx. 5m/min, drive: belt. An on-site inspection is possible.

turning diameter: 240 mm turning length: 530 mm control: Siemens 810 D Powerline swing diameter: 560 mm x-travel: 207,5 mm z-travel: 530 mm turning speeds: 6000 U/min : 12 Stk. total power requirement: --- kW weight of the machine ca.: 6,1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 16000 mm y-travel: 3000 mm taper ISO: 50 w-axis: 1200 mm spindle speed:: 2,5-1000 ram: 380x380 mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: - mm turning length: - mm swing diameter over bed slide: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m WEILER Bundle - RDU - LZ 330 - 2 x Commodor - UD 24 - DZ 67 V3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wiesheu Dibas with self-cleaning in-store baking oven  Manufacturer : Wiesheu Type : Dibas 64 L Year of construction: 2015 Model: Two-circuit model Number of supports: 10 for baking tray size /cm 60x40 cm Door lock: electric Heating: electric Control pre-programmed: yes Electrical voltage: 400V 3/N/PE plug: 27.5 A CEE plug Electrical connected load: 19 kW Mains frequency: 50 Hz Self-cleaning: yes Convection oven Accessories: steam condenser  Bakery condition Details see pictures.

In-store baking oven Wiesheu Dibas with self-cleaning  Manufacturer : Wiesheu Type : Dibas 64 S Year of construction: 2016 Model: Two-circuit model Number of supports: 5 for baking tray size /cm 60x40 cm Baking usable area approx. 1.2 m² Door lock: electric Heating: electric Control pre-programmed: yes Electrical voltage: 400V 3/N/PE plug: 13.9 A CEE plug Electrical connected load: 9.6 kW Mains frequency: 50 Hz Self-cleaning: yes Convection oven Accessories: Swath condenser  Baker's condition For details, see pictures.

In-store baking oven Wiesheu Dibas Manufacturer : Wiesheu Type : B08 Dibas 2 Year of construction : approx. 2009 8 supports for 60x40cm trays with steam condenser Baker's condition Functional Details see picture

In-store baking oven Wiesheu Dibas 64 S Manufacturer : Wiesheu Type : Dibas 64 S Year of construction : approx. 2012 2x5 supports for 60x40cm trays with steam condenser Bakery condition Functional Details see picture

A custom-built multi-stage nonwoven line for the production of two-layer or multilayer technical nonwovens made of synthetic or natural fibers with free-flowing materials such as herbs or seeds is available. Material weight range: approx. 100g/m²-1000g/m², needle machine manufacturer: Dilo, max. roll width: 2100mm, max. production speed: 200m/h, needling capacity: approx. 1200strokes/min, main motor: 45kW Siemens, total system dimensions X/Y/Z: approx. 10m/4.5m/4.5m. Process steps: nonwoven web feeding, carrier nonwoven feeding, material feeding (herbs), material dosing, material distribution, top nonwoven laydown, needle station, cutting/to length cutting, winding/rewinding, dust extraction. Documentation available. An on-site inspection is possible. The line is complete including accessories, peripheral equipment and a small sample needle machine.

Packing: 0,85 x 0,625 x 1,46 m Shipping weight: 570 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 1x tool adaptor: VDI 50 Shank diameter: 50 mm tool adaptor: Capto C5 Torque: max. 100 Nm Max. Speed: 4.000 min/-1 weight: 19,7 kg Driven Tool WTO 410505081-50 - Angle Drilling and Milling Attachment - Recessed - With Coromant Capto C5 - Internal and external coolant supply - Max. coolant pressure: 80 bar ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 Disc Turret DMG CTX gamma VDI50 Disc Turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline SAUTER Disc Turret VDI 50, DIN 5480, right VICTOR VTurn-36/40/45/46CV (DIN5480) - Machine interface: VD50A - Drive coupling: DIN 5480 - i (n1:n2): 1:1 - Direction of rotation: same - Coolant supply: IC 80 bar - Functional length LF: 124 mm - Projection length LPR: 183 mm - Functional width WF: 34.75 mm The data for this ad was created with ModulMWS - the sof ...

number: 1x tool adaptor: VDI 50 Shank diameter: 50 mm tool adaptor: Capto C5 Torque: max. 100 Nm Max. Speed: 6.000 min/-1 weight: 19,5 kg Driven Tool WTO 410105085-50 - Drilling and milling unit - Straight with offset - with Coromant Capto C5 - Internal and external coolant supply - Max. coolant pressure: 80 bar ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 disc turret DMG CTX gamma VDI50 disc turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline PITTLER PV 630, right-hand turret SAUTER disc turret VDI 50, DIN 5480, right-hand VICTOR VTurn-36/40/45/46CV (DIN5480) - Machine interface: VD50A - Drive coupling: DIN5480 - i (n1:n2): 1:2 - Direction of rotation: unequal - Coolant supply: IK 80 bar - Functional length LF: 160 mm - Cantilever length LPR: 160 mm - Functional width WF: 75 mm The data for this  ...

Geared motor, electric motor, electric geared motor, aseptic motor -Manufacturer: SEW-Eurodrive, geared motor aseptic motor type WAF30 DAS80K4/TF/IS -Speed: 173 rpm -Power: 0.25 kW -Hollow shaft: Ø 20 x 100 mm, built-in shaft Ø 15 x 30 mm -Flange: Ø 120 mm -Recess: Ø 80 mm Protection rating: IP66 -Number: 2x geared motors available Price: per piece -Dimensions: 385/150/H210 mm -Weight: 14 kg/pc.

Geared motor, electric motor, electric geared motor -Manufacturer: SEW-Eurodrive, gearmotor type WAF20 DR63S2/TF -Speed: 332 rpm -Power: 0.18 kW -Hollow shaft: Ø 20 x 100 mm -Flange: Ø 110 mm /Shaft Ø 15 x 30 mm -Protection class: IP55 -Number: 2x gear motors available -Price: per piece -Dimensions: 360/190/H250 mm -Weight: 7.7 kg/piece

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Execution: stable -Drive motor: SEW Eurodrive 0.3/1.3 kW -Speed: 12/51 rpm -Case: stainless steel -Conveyor screw: Ø 150 mm -Conveyor screw pitch: 150 mm -Trough width inside: 170 mm -Screw: steel/stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2120/300/H540 mm -Weight: 168 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor - Execution: stable -Drive motor: SEW Eurodrive 0.3 / 1.3 kW -Speed: 12/51 rpm -Case: stainless steel -Conveyor screw: O 150 mm -Trough width inside: 170 mm -Screw: steel / stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2960/300 / H600 mm -Weight: 154 kg

Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -function tested -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm -Coolant device -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg

Air cooler, evaporator, cold cell, industrial cooler, cooling unit, cooler, water cooler, cooling system, cooling -Manufacturer: Gretag Cooler -Cooling system comes from a marking laser SLS Spectron Laser Systems -Type: Handling Gretag Laser 6211 -for distilled water -Dimensions: 482/620/H177 mm 590/240/H705 mm -Weight: 37kg

Turning station, turning table, turning station, turntable, transport system, roller conveyor -for: edge banding machine, edge banding machine, edge banding machine -Turning station: for turning workpieces -Roller conveyor: wide -Roll width: 2900 mm -Roller conveyor length: 1500 mm -Turning head roller: rubberized -other roller conveyors available for an extra charge -Transport dimensions: 1500/3850/H1950 mm -Weight: 969 kg

Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe -Manufacturer: WMW, automatic lathe type DRT 50m -Turning length: 550 mm -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm -Three jaw chuck: Ø 200 mm -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW -Dimensions: 2420/1040 / H1460 mm -Weight: 2200 kg

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, diaphragm valve, diaphragm shut-off valve, double three-way shut-off valve -Manufacturer: Wehlan, Double three-way shut-off valve -Type: 33 R 010 A 02 Order No.: 13992 -Connection: DN32 PN16 -Hole spacing: 350 mm -Number: 12x valves available -Price: per piece -Overall dimensions: 490/140/H370 mm -Weight: 14.3 kg/pc.

Graver grinder, grinder, angle grinder, rotary steel grinder, thread drill grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder, double bench grinder, tool grinder -Manufacturer: precision mechanics Weilheim, lid tool grinding machine type SO/64-6550 -Motor power: 0.37 kW 2800 rpm -Speed: 2800 rpm -Grinding discs: Ø 100 mm -Dimensions: 510/450/H1280 mm -Weight: 67kg

Gear motor, electric motor, electric gear motor -Sale/sale: in current condition as seen -Connection housing: damaged, cover missing, see photos -Manufacturer: SEW-Eurodrive, geared motor type WA20 DR63S4 -Speed: 18 rpm -Power: 0.12 kW -Shaft: Ø 14 x 35 mm -Protection rating: IP55 -Dimensions: 300/170/H155 mm -Weight: 7.4 kg

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type WA20 DR63L4/IS i 39.00 -Speed: 33 rpm -Power: 0.25 kW -Hollow shaft: Ø 20 x 90 mm -Protection rating: IP54 -Quantity: 1x geared motor available -Dimensions: 300/220/H150 mm -Weight: 9.2 kg

Screws, hex bolts, flange nuts, hexagon nuts, collar nuts, solar fasteners, cylinder screws -Hex bolts/cylinder bolts: M10 stainless steel 330 kg -Hexagonal screws: DIN 933 M10 x 100 300 pcs / M10 x 20 4400 pcs -Cylinder head screws: DIN 912 M8 x 35 6600 pcs / M8 x 30 4200 pcs -Material: Stainless steel A2 -Price/Sale: complete -Transport dimensions: 1200/800/H200 mm -Total weight: 330 kg

Gear motor, electric motor, electric gear motor, worm gear motor, worm gear motor, Spiroplan gear motor, SPIROPLAN® right-angle gear motor -Manufacturer: SEW-Eurodrive, SPIROPLAN® right-angle gearmotor -Type: WF10 DT56M4 -Speed: 22 rpm -Power: 0.09 kW -Shaft: Ø 16 x 40 mm -Protection class: IP54 -Number: 5x motor available -Price: per piece -Dimensions: 255/190/H110 mm -Weight: 4.9 kg/piece

Gear motor, electric motor, electric gear motor, worm gear motor, worm gear motor, Spiroplan gear motor, SPIROPLAN® right-angle gear motor -Manufacturer: SEW-Eurodrive, SPIROPLAN® right-angle gearmotor unused -Type: WF10 DRN63MS4 -Speed: 23 rpm -Power: 0.12 kW -Shaft: Ø 16 x 40 mm -Protection class: IP54 -Number: 3x motor available -Price: per piece -Dimensions: 290/200/H115 mm -Weight: 6.2 kg/piece

Gear motor, electric motor, electric gear motor, worm gear motor, worm gear motor, Spiroplan gear motor, SPIROPLAN® right-angle gear motor -Manufacturer: SEW-Eurodrive, SPIROPLAN® right-angle gearmotor unused -Type: WA10/T DRN63MS4 -Speed: 23 rpm -Power: 0.12 kW -Hollow shaft: Ø 16 x 70 mm -Protection class: IP54 -Number: 1x motor available -Dimensions: 285/115/H160 mm -Weight: 5.8 kg.

Screws, hexagon screws, flange nuts, hexagon nuts, collar nuts, solar fasteners, cylinder screws -Hexagonal screws/cylinder head screws:M16 / M20 730 kg -Hexagon screws: DIN 931 8.8 M20 x 60 250 pieces / M20 x 55 DIN 933 8.8 4400 pieces. -Hexagon screws: DIN 931 8.8 M16 x 50/22 150 ST -U-washers: Ø 21.0 mm DIN 125 Form B 2100 pcs. -Price: complete -Transport dimensions: 1200/800/H440 mm -Total weight: 730 kg

Electric motor, three-phase motor for gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: Demag, crane motor unfortunately without type designation -Power: kW -Speed: 1485 rpm -Shaft: Ø 24 x025 mm -Design: B14 -Dimensions: 370/180/H250 mm -Weight 19.8 kg

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Case: made of stainless steel -Condition: Fans are unused (stock items) -Manufacturer: Fläkt Woods, axial fan axial fan -Type: 112JM/31/4/6/223S D160L -Power: 15 kW 1465 rpm -Number: 3x fan available -Price: per piece -Dimensions: 1350/1350/H830 mm -Weight: 300 kg/piece

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Housing: galvanized steel -Condition: Fans are unused (stock items) -Manufacturer: Fläkt Woods, axial fan axial fan -Type: 100JM31/04/09/22 50Hz 2L D160 -Power: 11 kW 1465 rpm -Fan wheel: Ø 1000 mm -Number: 1x fan available -Dimensions: Ø 1245 x 800 mm -Weight: 237 kg

Pillar jib crane, indoor crane, workstation crane -Manufacturer: Demag, pillar jib crane load capacity 125 kg -Base plate: 350 x 350 mm -Thrust: 2,000 mm -Total height: 1,780 mm -Hook height: 840 mm -Chain hoist: DEMAG type DC-Com 1 125 1/1 H4 V8/2 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 540/2100/H500 mm -Own weight: 176 kg

A W+D envelope manufacturing line is available. Blank length range: 265mm-653mm, blank width range: 214mm-726mm, max. production output: 450/min, paper weight range: 80g/m²-150g/m², max. paper roll diameter: 1500mm, max. paper roll width: 686mm, window reel width range: 30mm-490mm, window material section length range: 55mm-280mm. Documentation available. An on-site inspection is possible.

An envelope manufacturing system W+D for special formats, photo pouches, mailings and multiple foldings without gumming is available. Paper weight range: 70g/m²-270g/m², min. bottom flap pre-creasing: 10mm, max. side flap pre-creasing: 50mm, max. paper width: 620mm, max. paper length range: 150mm-470mm, bottom flap folding range: 25mm-45mm, min. format with 38mm fold: 115mm/100mm, max. format with 20mm fold: 280mm/380mm, min. closing flap: 50mm. Documentation available. An on-site inspection is possible.

General SKU231Y132 MakeWam TypeDLP2035G Year of construction2010 Main Features Motor3 KW Inlet diameter100 mm Width350 mm Specified Features - Lump breaker MaterialStainless steel 1.4307 (304L) Lump breakercheck Double shaftcheck Teeth height50 mm With hoppercheck bag dumping station InletDN100 OutletDN350 with valve Motor3,0 kW (400 V, 1430 rpm) Rotor speed60 rpm Information LocationBarneveld Mounted on wheelscheck With switchcheck Floorspace1,30 x 1,25 m Total height1,70 mLump breakersNew arrivalsWamBreakers > Lump breakersNew arrivalsBrand > Wam What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

x-travel: 7000 mm y-travel: 3000 mm z-travel: 1200 mm W-axis (spindle longitudinal): 500 mm spindle diameter: 150 mm quill:: 380 x 380 mm Plate dimensions: 4x 5000 x 2000 mm powered rotary table: 1600 x 1600 table load of rotary table max.: 10 t travel on the bed: 1500 mm tool taper: SK 50 turning speeds: 2,5 - 1000 U/min power capacity - milling spindle: 30 kW dimensions: m weight of the machine ca.: 62 t used manual horizontal borer with plate field - digital scale - tailstock - moveable vertical milling head - movable turn table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU230N087 MakeReko Industrial Equipment BV TypeInternally-fed drum screen TI-S 1200/1400 No.TZX0006/0001/S Year of construction2008 LocationBarneveld Main Features MaterialStainless steel Motor1.5 KW Length4000 mm Specified Features - Rotating sieve MaterialStainless steel Rotating sieveRotating drum sieve Sieve sizesdia. 1200x4000mm Motor1,5 KW, 230/400 Volt Sieve perforation3 and 4mm Information Floor space5,0x1,6 M Total height2,5 M Weight2000 KG Extra SpecificationsINTERNALLY FED DRUM SCREEN Separation of solids from waste and process water by means of an internally fed rotating perforated drum strainer. Rotating sievesRekoSieves > Rotating sievesBrand > Reko What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine ...

ABB DCT880-W03-0160-04XA DC Drive 160A 110kW Inverter DCT880 DCT880-W03-0160-04 Item Condition: New (Other) The item is new, but may show traces of storage. Technical data: Type: DCT880-W03-0160-04 (3-leg, 3-phase) Rated current: 160 A Input voltage: 110-400 V AC, 3-phase Power: approx. 110 kW (at 400 V) Weight: ~16 kg Dimensions: approx. 370 × 271 × 270 mm Note: For detailed technical data and processing instructions, we strongly recommend that you consult the original data sheets or information directly from the manufacturer More items - new and used - can be found in our shop! International shipping costs on request! PD16

General SKU201P111 MakeAlfred Bolz Gmbh&Co. KG TypeMF 500 Mach.No.M1180 Year of construction1988 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Technical specs Max. temperature100 °C Main Features MaterialStainless steel Volume11000 Ltr. Motor15 KW Specified Features - Conical dryer MaterialStainless steel 1.4404 (316L) Conical dryercheck Capacity5000 Ltr. (max. 11000 Ltr.) Largest cone diameter2687mm Cone height4400mm Dished topcheck ManholeDN600 Stainless steel armcheck (with mechanical seals) Top drivecheck Motorarm: 1,5 kW (Ex): screw: 16 kW (Ex) Bottom bearing pintle bearingcheck With jacketcheck (1100 Ltr.) Max. temperature100 °C Outlet with sliding valvecheck Information LocationBarneveld Floorspace3,1x3,0 m Total height5,5 m Weight± 7000 kgCatalysts & fillersFeed additivesPaper & otherConical dryersOther pha ...

General SKU204U042 MakeWerner & pfleiderer TypeZSK 70F175E Mach.No.231783 Year of construction1996 ( gearbox 2017) Sizes Screw diameter70 mm Main Features Motor108 KW L/D23 Specified Features - Double screw extruder MaterialNichrome 2.4869 Double screw extrudercheck Screw diameter70 mm L/D23 Co-rotatingcheck Water coolingcheck AC-motorcheck 108kW, 330Volt, 1500rpm With variable speed drivefrequency controller Screw speed198 rpm Exchangeable segmentscheck ( not included) Information LocationBarneveld With switchgearcheck Sizes switchgear1,25x0,7x2,15 m Floorspace4,6x2 m Total height1,7 m Weight6400 kg Extra Specificationsinlet: 142x130 mm - there are 2 screw shafts present - no screw segments present - no extruder head present Catalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsFood additivesSugarLubricants & oleoAnim ...

General SKU201P110 LocationBarneveld MakeAlfred Bolz Gmbh&Co. KG TypeMF 500 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Technical specs Max. temperature100 °C Main Features MaterialStainless steel Volume11000 Ltr. Motor15 KW Specified Features - Conical dryer Conical dryercheck Capacity11000 Ltr (5000 Ltr nett capacity) Largest cone diameter2687mm Cone height4400mm Dished topcheck ManholeDN600 Stainless steel armwith mechanical seals Top drivecheck Motorscrew, 15,0 kW, 380 Volt (Ex) Motorarm, 1,35 Kw, 220/380 Volt (Ex) Bottom bearing pintle bearingcheck With jacketcheck (1100 Ltr.) Max. temperature100°C. Outlet with sliding valvecheck MaterialStainless steel 1.4404 (316L) Information Mach.No.WK 109923A / WK 340369 Year of construction1988 Floorspace3,1x3,0 M Total height5,5 M Weight+/- 7000 KGCatalysts & fillersF ...

General SKU300U889 MakeGlatt GmbH TypeTFN30 No.4428 Year of construction1985 LocationBarneveld Main Features MaterialStainless steel Volume100 Ltr. Motor7.5 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pancheck (3x) With pan mounted on wheelscheck Capacity100 Ltr. (30-60kg) Pan sizesDia. 500x300 mm Capacity100 Ltr. Can be heated by steamcheck 3bar, 50.000 Kcal/h With fancheck Capacity1500m³/h Motor7,5kW, 380Volt, 2920rpm With dust filtercheckinlet filter and outlet filter Filter surfaceinlet filter: unknown, outlet filter:4m² Mechanical cleaningcheck With timercheck MaterialStainless steel 1.4301 (304) Information With switchgearcheck( as is) Floorspace3,2x2,3 m Total height3,1 m Weight1600 kgCatalysts & fillersFeed additivesOther pharmaceuticsOther feedSolid pharmaceuticsFluid bed dryers batchMinerals & inorganicOther chemicalSt ...

General SKU322S570 MakeQVF Glastechnik GmbH (D) TypeWashing, dissolving, filtering, precipitating and recovering installation No.155153/2214 Year of construction1995 Mounted on legsframe Pressure Working pressure0.3 Bar Vacuum possiblecheck Main Features MaterialGlass Motor0.37 KW Specified Features - Glass-lined Reactor MaterialGlass Glass Reactors Capacity120 ltr (4x), 110 ltr. (1x) Vessel sizesdia. 595x480m (4x), dia. 400x750mm (1x) Max. temperature20 degr. C With propellor stirrer0,37 kW 230/400 Volt 175-775 rpm With paddle stirrercheck Motor0,25 kW 230/400 Volt Speed mixing shaft110-630 rpm Information LocationBarneveld With switchgearas is Floorspace4,6x2,0 M Total height2,3 M Weight1800 Kg Extra SpecificationsQVF Glasstechnik Washing, dissolving, filtering, precipitating, and recovering installation The entire installation is built in a tubular steel  ...

General SKU007W071 MakeJohann Kreuziger Maschinenfabrik TypeDSH/250 No.21298 Year of constructionunknown LocationBarneveld Main Features MaterialMild steel Motor36 KW Specified Features - Dissolver Shaft length700mm Disc diameterdia. 400mm Motor36 kW 380/660 Volt MaterialMild steel Information With switchgearcheck Floorspace2,6x1,6 M Total height2,2 M Weight2000 KGCatalysts & fillersDissolversSolventsDiscountDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicOther chemicalFine chemicalsOintmentsPaints & coatingsOils & fatKreuziger WienIndustries > Chemical > Catalysts & fillersMixers > DissolversIndustries > Chemical > SolventsDiscountIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > Lubricants & oleoIndustries > Food & Feed > Other feedIndustries > Chemical  ...