w d used for sale

Hot water generator KENT Duo HotBox 500 bar Description: - Working pressure: up to 500 bar - Flow rate: 2 x 11-56 L/min. - Burner: oil / approx. 90 KW - Tank: approx. 20 L - incl. Automatic Start/Stop Flow - incl. flame control - incl. operating hours counter - Chassis: Black lettered - Hood stainless steel Features: - Powder-coated frame with stainless steel cover - 4 wheel chassis with solid rubber tires - fan motor, - Oil pump - KENT burner boiler with approx. 90 KW heating capacity - Automatic switch-off start-stop flow controlled - incl. E-connection cable - Water inlet temperature max. 60°C Scope of delivery: - Inlet hose Dimensions: (L x W x H in mm) 1000 x 680 x 760 Weight: approx. 190 Kg Shipping possible. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

Hot and cold water high-pressure cleaner Working pressure: infinitely variable up to 500 bar Maximum requirement quantity: 14-30l /min Pump:3-Plunger,All-Ceramic Engine: Hatz,3-cylinder diesel (water-throated) Motor power:42kW Speed motor/pump: 2,350 /1,450 rpm Pump drive:V-belts Fuel consumption:approx. 5.3 l/h Volume fuel tanks:70l/105 l Volume water tank: 1000 l Pressure outlet:(water): M241.5 IG Heating capacity olburner: 291 kW (ca 95 °C) Consumption olburner: approx. 9.1 l/h Construction: self-supporting frame on frame with forklift pockets Empty weight: approx. 1,450 kg Mass: (LWH) 220+147177 Ground open (LWH) 307147246 Article no.: 1 491 030

Cold water high-pressure cleaner Working pressure: 800 to 2,800 bar Required quantity: 8 to 27l/min Pump: Slow-running high-pressure pump with 3 carbide plungers, integrated reduction gear, compression lubrication and engine clamp Engine: VOLVO PENTA 4 CYLINDER Diesel,water-throated,5.200cm3 Engine power:160 kW,220 hp Motor/pump speed: 2,065rpm / 500 rpm Pump drive: Gearbox Fuel consumption:approx. 21 l/h Volume fuel tanks200l Volume water tank: 160l Volume urea tank: 25l Consumption urea: approx. 1.05 l/h Pressure outlet:(water): 9/16'' -18UNF LH IG or DYNAJET Easy Connect EC Chassis: 2-axle attachment Empty weight: 2.690kg Mass: (LWH)467197218 Ground open (LWH)487197254 Article no.: 1 610 040

Single-chamber washing machine with rotary basket

Rated output at 50% ED: 80kVA Short circuit current: 35kA Electrode force: 100-600daN / easy lift Projection: 350-650mm --- Welding control: MPS 10 (5 times, 8-program) --- Incl. additional options: -Flow switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

8 piece welding pliers 1 piece welding control Manufacturer: Düring

Technical data: -Welding current 505 A 35% ED 433 A 60% ED 385 A 100% ED -Welding current 6 coarse steps + 6 fine levels adjustable - welding current adjustable from 40 A / 16 V to 505 A / 39.3 V - digital amp + voltmeter -separate stroke of wire feed case - 4 roll wire feed Steplessly adjustable - 2 + 4 stroke â regulation -E - welding equipment - hose water cooled approximately 6 YDS -Ground cable -Pressure reducer -Intermediate package machine - wire feed speed approx. 8 m - connection 400 V / 50 Hz 50 A -Space requirement approx. B 520 x H 1400 X 1000 mm -Weight approx. 170 kg

Technical data: -max load capacity 3000 kg -Faceplate cross 1600 x 1600 mm -Faceplate cross extension tubes - faceplate cross mot. adjustable 0-90 / 135 ° - rotation infinitely variable 0,01-4 U/min -Right - + rotation control -Transmission of welding current approx. 500 A -400 V - table height in horiz drive. Position without stand approx. 1200 mm -Table height at horiz. Position with frame approx. 2200 mm -Space requirement approx. B H 1600 x 1200 + 1000 X 2400 mm -Weight approx. 2700 kg

Qty. 1 Second-hand bar and wire rod production plant Mfc.: Sarralle, Danieli, ABB, Indar Built: 1990’s, 2000, 2005, 2007, 2010 Revamped: 2008 Capacity: 1,100,000 T/annum Entry material: Scrape Semi product: Billets Size: 130x130 mm or 140x140 mm Length: 8 – 13 m Reinforced Bars: Dia.: 8 - 40 mm Length: 6 – 12 m Rebars: Dia.: 8 - 16 mm ID: 850 mm OD: 1100 – 1250 mm Height: 800 mm Wire Rod: Dia.: 5.5 – 14 mm Scope of supply: Scrap Transportation Machines EAF Ladles Furnace Continuous Caster Billet Reheating Furnace 23 Rolling Mills (Dia. 8-10 mm) 21 Rolling Mills (Dia. 12-32 mm) Wire Rod Mill Flying Shears (2) Spooler Line Cooling beds (2) Cranes Transformes Spare Parts

Machine type: TIG inverter welding system gas-cooled direct current system Make Eurotronic Type TIG 1501 - DCi Connection voltage 1 x 230 volts Setting range 5 – 150 amps Duty cycle 35 % d.c. at 150 amps 60% d.c. at 120 amps 100% d.c. at 100 amps Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable assembly line design Fuse 16 amps Dimensions L x W x H 400 x 170 x 250 mm Weight 9 kg Age approx. 10 years Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece ME-TIG burner TH 161 G, 4 m 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 12 Months Warranty 1 Piece Instruction Manu ...

Web guider ElGuider, DRB1402, Erhardt+Leimer, new -40% Special price ! We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price of a similar product is about € 4.300. If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 100 hours. ELGUIDER - DRB1402 Rotary frame system Profinet with rotary frame DR 1401 in compact version for the control of a running web, with digital position controller and brushless actuator, Control frame for D100 rollers, - Size: Size 2, - Nominal width NB: 250 mm, - transfer length LUE: 250 mm - Sensor: FX 46 ultrasonic sensor, - Incl. existing cables - Sensor adjustment: Manual, Standard, - F ...

Available Recon

We offer the following Doka Framax elements: Doka Framax Xlife 1.35 x 1.35m with 75% discount = 274,50€/pc net. 64 x Framax Xlife element 1.35x1.35m Accessories available on request. Formwork completely cleaned, inspected and sorted. Formlining fair-faced concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. If you have any questions, please contact Mr. Becker on 0049 176 70044689 purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registry Court: HRA722943 VAT NUMBER: DE279047055

Cold water tank, second-hand, Fabr. Gresser, net capacity: 400 hl; Total capacity: approx. 427 hl, in chrome-nickel steel 1.4301, insulated with 150 mm PU foam and covered with trapezoidal sheet metal, standing on a concrete base, for pressure-free operation, Brewing water tank, used, Fabr. Gresser, net capacity: 250 hl, total capacity: approx. 265 hl, in chrome-nickel steel 1.4301, insulated with 150 mm PU foam and covered with trapezoidal sheet metal, standing on a concrete base, for pressure-free operation, Extrusion Storage, Fabr. Gresser, total capacity: 169.20 hl, operating overpressure: 6 bar, in chrome-nickel steel 1.4404/1.4571, insulated with 150 mm PU foam and covered with trapezoidal sheet metal, standing on a pedestal frame, Ø: 2,140 mm, total H: 7,673 mm,

Machine Type: TIG Welding Machine Water-cooled DC and AC system Make Dalex Type TGKW 55 Connection voltage 2 x 400 volts Adjustment range 3 – 225 amps Duty cycle 60% ED at 225 amps 100% ED at 175 amps Current setting 5 switching levels max. weldable material thickness 6 mm Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse 32 Amps Dimensions L x W x H 1,300 x 600 x 850 mm, incl. bottle cage Weight approx. 200 kg Age approx. 30 years Condition workshop-tested incl. UVV test report Scope of supply welding system with the following accessories: 1 piece TIG welding torch WHW 20, 4 mtr. 1 piece ground cable 1 piece pressure reducer 1 pair of TIG gloves 1 piece spare parts box complete Equipped Warranty: 6 months from the date of delivery Original price €3,400.00 + VAT  ...

Oil mist separator complete device Air output 1100 m3/h Flow temperature 5-45 C° Engine 1.45 kW-230/400V 50 Hz

Rated power at 50%ED: 63kVA Short-circuit current: 31kA Electrode force: 730daN / double stroke Extension: 500mm --- - Electrode arm top-straight D45/25/500g - Electrode arm bottom-straight D45/2/500g --- Welding control: MPS 10 (5-times, 8-program) --- Spring pull on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Domino Lasers, Succion system with carbon filter. Can be used for Domino lasers markers or for others Engraving lasers systems.

Driven roller conveyor that can be rotated at right angles (90 degrees) by motor drive - used - Price (net) from location: only 1.500.-€, dismantled and loaded! Manufacturer: should be Siemens Dematic Built: Type: Length of roller conveyor: approx. 1,645m Wide element approx. 75cm Roll length: approx. 60cm Roll width: approx. 5cm Distance between rolls approx.: approx. 5cm Height: approx. 55cm Engine: SEW Length frame: one side approx. 2m, other side unknown (but can be changed anyway by the aluminium profiles Condition: good Available: now Location: Zwickau, later Frankenberg camp (Saxony)

approx. 200 Felder Wide-span racks / shelving racks, SSI Schaefer, with steel shelves – used – : Price per field with steel shelves from location: 295.-€ (net), dismantled, packed and loaded! Price per field without steel shelves from location: 225.-€ (net), dismantled, packed and loaded! Additional simple trusses: 5.-€ (net) / piece Manufacturer: SSI-Schäfer Type: Bundle flow rack (converted) Year of Make: 2013 With 3 floor levels per field! Frame width: approx. 6cm Frame depth: approx. 85cm Truss height: approx. 6cm Dimensions of steel shelves: Depth: approx. 76.5cm, width: approx. 30cm. Height: approx. 2cm, stock approx. 130 pcs. Depth: approx. 76.5cm, width: approx. 20cm. Height: approx. 2cm, stock approx. 76 pcs. Bracing beam: height approx. 6.5cm Available frame heights: Shelf height: approx. 2.20m Depth: 85cm Number of frames: 288 piec ...

Available on stock immediately Available single and double versions in Recon and Used

maximum load capacity with horizontal planing disc 60 tons, maximum load with vertical planboard 90° at a load center of one meter 30 tons – with a load center of two meters 19 tons.

Spiral kneader Diosna W 240 A Diosna Wendelkneter W 240 A . The kneader is suitable for industrial and craft bakeries. -for max. 240 kg dough or for max. 150 kg flour -Stainless steel Wendel -digital control -Boiler feeder with pliers locking -with Diosna film display digital -robust machine -more pictures and information on request -Shipping and payment on request -Machine can be inspected and tested in our warehouse

Towed chopper TP 760 P, wood chopper with feeder approx. 160x260 mm, combination with Reiser SCH 230 container tipper. Container loading capacity 3.5 m3, high emptying to approx. 224 cm, additional loading flap in the rear. Tyres 10.0x75-15", parking brake, Total weight 2,800 kg. Machine in non-operational condition. More bush hackers and wood chippers in stock!

Rated power at 50%ED: 20kVA Short-circuit current: 15kA Electrode force: 420daN Extension: 130-500mm --- Controls: RS 17 (5-times, 2-program) --- incl. additional options: - Foot switch "powerless set-up" - Tube arm Mk2, straight - Main switch - 3m connection cable with plug --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Wall swivel crane Payload 250 kg Lifting height 5,000 mm Extension 6,500 mm Hallway control Electricallifting/Lowering Lifting speed 10 /2.5 m/min. Connection 380 Volt

specifications: - Load capacity Positioning table approx. 750 kg - Sheet plate diameter 500 mm - max workpiece diameter 1600 mm - Height turntable at horizontal position approx. 750 mm - Turntable with right, + left-hand run - Rotary axis turntable endless 360° - Turning time per revolution 12.5 sec. - Pan left + right - Pivot axis rotation angle 180° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolts for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg

specifications: - Load capacity Positioning table approx. 750 kg - Sheet plate diameter 500 mm - max workpiece diameter 1600 mm - Height turntable at horizontal position approx. 750 mm - Turntable with right, + left-hand run - Rotary axis turntable endless 360° - Turning time per revolution 12.5 sec. - Pan left + right - Pivot axis rotation angle 180° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolts for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg - sepa ...

Angular table for lid milling machine Clamping flat 900x530mm 8 St T-hooks Never used

Hydraulic wood splitter, functional Details on request

manually operated, air-cooled Rated power at 50%ED: 2.4kVA Short circuit current: 7.5kA Electrode force max.: 180daN Projection: 250mm --- equipped with: - 5m connection cable - Standard electrode arms 250mm Control RS15 (optional) --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

arm length: 4000 mm weight max. in kg: 500 kg swivelling range: . Grad total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 44 with wall bracket The techn. Data are manufacturer or operator information and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions apply. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: 5000 mm Width: 750 mm Height: 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1000 mm table load: 0,6 t swivelling range: 0 - 90 Grad turning speeds: 0,1 - 1,25 U/min max. torque on the faceplate: 900 Nm table pass: 200 mm welding current: 500 Ampere total power requirement: 0,37 + 0,75 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Desoutter CVI II Controller with Angle Wrench Manufacturer: Georges Renault (Desoutter) Controller: CVI II Angle wrench : 01C11200 CVI II Controller From simple start-ups to complex sequence applications – with up to 20 phases and 250 cycles – for optimal speed, accuracy and operator comfort on every connection. The controller has various interfaces, including an Ethernet port, an RS232 port and 7 logic inputs as well as 8 logic outputs (24 volts). The CVI II controller can be used to control a handheld power tool of the ER series or a stationary screwdriving spindle of the EM series. It is important to note that the CVI II can also be used in combination with a transducer-controlled angle wrench such as the Desoutter ERA40J, which has a torque range of 8 to 40 Nm and a 3/8" output. Storage capacity Between 2,500 and 8,500 screwdriving results per station de ...

We offer a Doka Framax 270 and 135 formwork 485.87m² complete with accessories on request. The formwork is completely cleaned, checked and ready for immediate use. Can be used for fair-faced concrete class 2/3 without any problems. Partly recovered with phenolic resin plates 220- 240g film coating, Finnish birch through and through, BFU 100 glued. New value approx. 352.817,00€ - Special net price: 124.853,00€ Pcs. Description 3 Framax Xlife-Element 2.40x2.70m new panel - Doka rental warehouse 5 Framax Xlife-Element 2.40x2.70m Doka rental warehouse 9 Framax Xlife-Element 1.35x2.70m new panel - Doka Rental Warehouse 32 Framax Xlife-Element 1.35x2.70m Doka rental warehouse 9 Framax Xlife-Element 1.35x2.70m Doka rental warehouse 8 Framax Xlife-Uni-Element 0.90x2.70m Doka rental warehouse 8 Framax Xlife-Element 0.90x2.70m Doka rental warehouse 8 Framax Xlife- ...

Specifications: - max. Load capacity 10000 kg - Flat discs 1400 x 1400 mm - Flat disc hydr. swivel 0 - 90 / 135 ° - Rotary movement infinitely variable 0.05 - 1.2 rpm - Right - + left-hand running controllable - Welding current transmission approx. 500 A - Drive 400 V - Table height at horiz. Position approx. 2500 mm - E. handheld remote button - Space requirement approx. W 2000 x H 2500 x D 2700 mm - Weight approx. 5200 kg

The CE08 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE08-200 50Hz 200 bar 16 l/min. CE08-200 60Hz 200 bar 16 l/min. General Specifications: ----- Power of the drive motor: 6.0 kW Volts: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

For sale: Diosna spiral kneader W 240 - 3 boilers - Program memory - Speed control with an inverter - with the possibility to change the speed of the spiral/tool - boiler with tilting possibility - perfect condition Contact: damianborucki@anbox.pl or +48 692 345 660 (also WhatsApp)

Diosna spiral kneader W 240 - 3 boilers - 400kg dough - after repetition - industrial mixer

For sale: Konig spiral kneader GYD 240 system as in Diosna - 3 boilers - after general overhaul - perfect condition Contact: damianborucki@anbox.pl or +48 692 345 660 (also WhatsApp)

FN Steel high‑capacity hybrid rolling mill - continuously modernized through major upgrades - delivers wire rod and bar‑in‑coil from Ø 5.5 mm to Ø 30.0 mm at speeds up to 100 mps. Combining technology from the three major OEMs, it offers speed, flexibility, and quality for the most demanding markets. ‘SMS-PRIMETALS-DANIELI’ High Speed Wire-Rod & Bar-in-Coil Rolling Mill Highlights Wire-rod (‘Morgan line’): Ø 5.5 –16.0 mm with pre-finishing and reducing sizing mills Bar in Coil (‘Garret line’): Ø 16.5 –30.0 mm with two coilers for higher output On-line Heat Treatment: water boxes and temperature-controlled cooling conveyor to achieve desired microstructures Capacity: > 400,000 tons per year Applications: High‑carbon, alloy, bearing, spring, cold‑heading steels Rolls & Guides’ Shop: Fully equipped workshops Spare Parts: L ...

MAX. OUTER TUBE DIA. 85 MM

Pre-welding flange diameter DN 1200 pressure stage PN 6, stock goods, 2 pcs. new, primed, shipping possible worldwide, price per piece

Spot welding guns --- Rated power at 50%ED: 25kVA Short circuit current: 22.5kA Electrode force: 600daN / double stroke Projection: 170mm --- - Electrode arm top-straight E34/25/170g - Electrode arm bottom-straight E34/8/170g --- Welding control: MPS 1036 (5 times, 1 program) --- Spring tension on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

We offer a Doka Framax 270 wall formwork 334.66m² complete with accessories. The formwork has been cleaned, checked and is immediately ready for use. Partly new Finply formlining. Partly new accessories. Suitable for higher-value applications. SB 2/3 possible without any problems. New value Doka price list 2025/ 2026 = 264.019,00€ Special net price 94.915,00€ Pcs. Description 3 Framax Xlife element 2.40x2.70m new panel, Doka rental warehouse 5 Framax Xlife-Element 2.40x2.70m Doka rental warehouse 12 Framax Xlife element 1.35x2.70m new plate, Doka rental warehouse 38 Framax Xlife-Element 1.35x2.70m Doka rental warehouse 8 Framax Xlife-Uni-Element 0.90x2.70m Doka rental warehouse 5 Framax Xlife-Element 0.90x2.70m Doka rental warehouse 3 Framax Xlife-Element 0.90x2.70m Doka rental warehouse, new plate 8 Framax Xlife-Element 0.60x2.70m Doka rental war ...

table diameter: 350 mm table load: 100 / 50 Kg swivelling range: 0 - 90 manuell Grad turning speeds: 0,5 - 5,0 U/min spindle bore: 30 mm Torque: 75 Nm welding current: 500 Ampere connected load frequency: 230 Volt Welding turntable with - Footswitch - tilt over winch - Speed continuously adjustable - 500 amps welding current transmission The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cold water high-pressure cleaner and hydraulic oil demand unit. Working pressure: Infinitely variable up to 320 bar. Required quantity: up to 21l /min (1,260 l/h) Pump: 3-plunger, all-ceramic Engine: 2 cylinders 4 stroke petrol engine Motor power: 16.4 kW Speed motor/pump: 3,250/1,450 rpm Pump drive: Gearbox Fuel consumption:approx. 5.5l/h Volume fuel tank: 20l Pressure outlet (water) M221,5 AG Heating capacity Olbrenner Empty Weight: 110kg Dimensions(LWH) 757999cm Article no.: 1 486 089

Cold water high-pressure cleaner Working pressure: infinitely variable up to 350 bar Required quantity:up to 21l/min (1.260l/h) Pump:3-Plunger All-Ceramic Engine:2 Cyilinder, Hatz Diesel,air-throated Motor power:17 kW Speed motor/pump: 2,900/1,450 rpm Pump drive: V-belt Fuel consumption:approx. 4,0l/h Volume fuel tank:20l Pressure outlet (water):M221.5AG Heating capacity Olbrenner Empty Weight:215kg Mass(LWH) 918096 Article no.: 1 492 060 or 1 492 002

Hot and cold water high-pressure cleaners Working pressure:infinitely variable up to 350 bar max requirement quantity:16l/min Pump:3 Plunger,All-ceramic Engine:Kubota 3-cylinder diesel Motor power:13kW Speed motor & pump: 3000/1,090 rpm Pump drive:V-belts Fuel consumption:3,9l/h Volume of carbon tank:70l Volume water tank:300l Pressure outlet (water) M22 1.5IG Heating capacity olburner: max1115kW (approx. 95°C) Consumption Olbrenner: approx. 7l/h Construction:self-supporting frame on frame with forklift pockets Empty weight:about 680kg Mass(LWH) 152122146 Dimensions open (LWH) 183122195 Article no.: 1 480 030