132,113 used machines on RESALE, but how to find them? Machine Search
Wenzel 3D CNC Measuring Machine XO55 with PH10M Software Quartis This precise 3D CNC measuring machine from Wenzel, model XO55, equipped with the PH10M software Quartis, is characterized by its high accuracy and reliability. Features High accuracy and reliability Equipped with PH10M pushbutton Software Quartis Good used condition Technical data Travels: X=550 mm, Y=500 mm, Z=500 mm Table size: 800 x 600 mm Maximum table load: 300 kg Power consumption: 3.7 KVA
1 Wagner Leopard 3570 airless sprayer with air piston drive. It is for hanging on the wall. About 8m of spray hose are included, and a gun with nozzles, filters, etc. For data see type plate Technical data: Gear ratio: 35:1 Max. air inlet pressure: 7.1 bar Max. working pressure: 250 bar Volume flow rate per double stroke: 70 cm³ Max. stroke rate: 60 DH/min Max. flow rate: 4.2 l/min The system was in operation until recently, is well maintained and perfectly cleaned. Pick-up only in 27404 Zeven.
Manufacturer: Widmann Model: SI 100 - Top Year of Manufacture: 2022 Certification: CE Electrical Data: - Apparent Power: 42 kVA - Frequency: 50/60 Hz - Voltage: 3 x 400 V / N / PE - Current: 80 A Machine Cycles: 695,067 - Total Cycles: 810,321 - Total Operating Hours: 268 h Find more here - / Contact us at -
WEYHMÜLLER CBU-ISO 10332 automatic COMBIPACK Machine for the application of Pre-Printed Blanks onto Round Cup/ Rectangular Container Walls,, Age 2017 only used for ca. 8000 hrs., The Combipack Thin-Walled Cup/ Containers (Products) use up to 60% less material than conventional thermoformed Products, the applied paper Blanks provide stability & strength. The Paper Blanks can be easily separated for recycling purposes., Machine Consisting of:-, • Elevator Tray Feeder, • Cup/ Container In-Feed Conveyor, • Universal 4 x Screw Denester, • Indexing Turret with 8 x Mandrels, • Turret Indexes to:, Cup/ Container infeed Station, Blank Feeder Station, Glue application Station, Blank Forming/ Folding Station, Glue Drying Station, Cup/ Container Bottom Labelling Position, Counter/ Stacker Station, • Pre-printed Blanks horizontal accumulator In-Feed Conveyor to:, • Vertically stacked B ...
Key data: 1 , 10
Oil-lubricated piston compressor Cooling: Air-cooled design Drive: direct-driven piston compressor Including 6 liter container (painted) Performance data Volume flow 270 l/min Operating pressure max. 10 bar Nominal power motor 1.8 kW Number of cylinders 1 Compressor stage(s) 1 Installation data Ambient conditions min. / max. 2 / 40 °C Sound level 73 dB(A) Voltage / Frequency 230 / 50. V / Hz Dimensions and weight Length x width x height 455 x 475 x 500 mm Weight 24 kg Compressed air outlet coupling Compressed air tank capacity 6 lt
For sale are five driven tool holders axial VDI40 ER25 Fully functional Price indication is per holder Billing: Invoice will be issued. According to §19 para. 1 of the German VAT Act, no turnover tax is charged (small business regulation) Delivery: Pick-up on site or shipping possible. Shipping costs are borne by the buyer If you have any questions, please feel free to contact us.
This 3 axes Wele RB - 212 was manufactured in 2016. It features an impressive X-Axis travel of 2120 mm, Y-Axis travel of 1200 mm, and Z-Axis travel of 800 mm. The machine is equipped with a Heidenhain iTNC 530 CNC system and can support a maximum weight of 3500 kg on its 2000 mm x 1100 mm table. Consider the opportunity to buy this Wele RB - 212 vertical machining center. Contact us for further details.
An old hardness tester is offered. It still has the old, extremely stiff frame, which is no longer used today. There are nine Rockwell diamonds, of which at least three are still new.
For Sale: Automated Film Wrapping and Strapping Packaging Machines 1. Film Wrapping and Shrink Packaging Machine — CMB 600 Manufacturer: CMB Model: 600 Description: Automated film‑wrapping and shrink‑packaging machine designed to wrap products in suitable plastic films, seal them, and optionally shrink them for stable, transport‑ready bundles, operating with multiple modules, safety systems, and format‑adjustment options. 2. Automatic Strapping Machine — RQ-8X Manufacturer: StraPack Corp Model: RQ-8X Automatic Strapping Machine Description: An automatic strapping machine that applies, tensions, and seals polypropylene straps around packages to secure them quickly and consistently. Benefits of Combined System Together, both machines serve to stabilize, protect, and prepare goods efficiently for storage or shipment through reliable wrapping and strapping processes. F ...
Height 2260 mm Width 1430 mm Length 2130 mm Weight 1400 kg Capacity 530 l Electrical Supply: 400V 50Hz 3N Total power 6 kW Main Material Stainless Steel, Acid Resistant Agitator Type Paddle Agitators Load 350 kg Product ejection Manually opened flaps, front Loading Pole loading, freestanding Stirrer type Open stirrer Number of shafts Single shaft Comes with a loading column for 200 L battlements.
Offer 26018 Technical data: - Max. working length 500 mm - Max. sheet thickness 1.5 mm - Various roller diameters - Drive – brake motor 400 V / 1.4 kW - Space requirement approx. W 850 x D 1700 x H 1250 mm - Weight approx. 0.8 t - Roller attachments 42 ; 45 ; 50 ; 55 ; 60 ; 65 ; 70 ; 90 ; 135 mm
Key data: 3 , 40 , 14
Capasity 14,4 m3 Pressure 40 bar rpm 1450 power demand 3,6 kW
General SKU288X384 MakeIka Werke TypeMHD 2000/05-ATEX No.200023306 Year of construction2020 Mounted on framecheck Main Features MaterialStainless steel Motor7.5 KW Rotor60 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 60x150 mm InletDN50 OutletDN32 Number of stages:2 Capacity700 l/h Motor7,5 kW, 400/690 volt, 2910 rpm, (Ex) Rotor speed6000 rpm MaterialStainless steel 1.4306 (304L) Information LocationBarneveld Floorspace0,70x0,40 m Total height1,20 m CEcheck ATEX compatiblecheck Extra SpecificationsTotal cap. 700 l/h, solids cap. Max 500 l/h.Inline high shear mixersIKA WerkeMixers > Inline high shear mixersBrand > IKA Werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...
General SKU204X024 LocationBarneveld CEcheck Main Features Motor2.2 KW Length6500 mm Inlet diameter200 mm Specified Features - Vertical screw conveyor Vertical conveyor screwcheck Tube-modelcheck Diameter75 mm Length6500 mm Between inlet and outlet6500 mm With hoppercheck dump cabinet Inlet200x200 mm OutletDia. 200 mm Motorcheck 2,2 kW, 230/400 volt, 1430 rpm MaterialStainless steel 1.4301 (304) Information MakeWysetech No.18174 Total height7,0 mVertical screw conveyorsWysetecConveying systems > Vertical screw conveyorsBrand > Wysetec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU279X364 MakeHSK Wärmetechnik Gottfried Kneifel GmbH LocationBarneveld CEcheck Pressure Working pressure19 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume250 Ltr. Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404 (316L) Stainless Steel Reactors Reactorcheck Capacity250 l. Vessel sizesø 650 x 2300 mm Dished bottomcheck Max. temperature200 °C Information No.2267/1 Year of construction2012 Floorspace1,00 x 1,00 m Total height2,40 m Weight850 kgStainless Steel ReactorsNew arrivalsHSK Wärmetechnik Gottfried Kneifel GmbHReactors > Stainless Steel ReactorsNew arrivalsBrand > HSK Wärmetechnik Gottfried Kneifel GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine ...
General SKU379X1443 LocationBarneveld MakeSeitz No.1068S Pressure Working pressure3 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume131 Ltr. Pressure3 Bar Specified Features - Pressure vessel MaterialStainless steel 1.4401 (316) Capacity131 l. Vessel sizesø 500 x 600 mm Dished topcheck Dished bottomcheck With covercheck Top connectionscheck OutletDN50 With propellor stirrercheck Motor0,25 kW 220/380 V 670 rpm Information Year of construction1969 Mounted on legscheck Floorspace0,90x0,90 m Total height1,50 m Weight120 kg Extra SpecificationsWith pumpPressure vesselsSeitz - WerkeTanks > Pressure vesselsBrand > Seitz - Werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barn ...
General SKU335X732 MakeGEA Westfalia LocationBarneveld CEcheck TypeCSC 20-06-476 Main Features MaterialStainless steel Capacity1000 Ltr./Hr. Motor11 KW Specified Features - Separator Separatorcheck Capacity500-1000 Ltr./h Motor11 kW, 230/400 volt, 1400 rpm Max. rotor speed8320 rpm Self-dischargingcheck InletDia. 180 mm Liquid outletDN50 Solids outletDN125 Mounted on stainl. steel framecheck MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) Information No.1722986 Year of construction2003 Mounted on mild steel frameStainless steel frame With switchgearcheck Floorspace2,50x1,30 m Total height2,40 m Extra SpecificationsVolume 53 l., max operating pressure 2,6 bar, max operating temperature 133°C, : With stainless steel overflow vessel, volume 55 L: jacket volume 10+16 L. allowable temperature +133°C, allowable temperature jacket, +20°C, ...
General SKU388X982 MakeHermann Waldner No.787 Year of construction1984 Mounted on legscheck and wheels Pressure Working pressure0 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume200 Ltr. Motor1.1 KW Specified Features - Stirring vessel MaterialStainless steel 1.4401 (316) Closed stirring vesselcheck Capacity200 l. Vessel sizesDia. 800x900 mm Dished bottomcheck Dished top sidecheck With coverDN600 Manholecheck Top connectionscheck Outletcheck DN40 with ball valve With jacketcheck volume 25 l. Max. temperature90°C With propellor stirrercheck Motor1,1 kW, 230/400 volt, 915 rpm, (Ex) Speed mixing shaft915 rpm. Information LocationBarneveld Floorspace0,80x0,80 m Total height2,20 m Weight350 kg Extra SpecificationsWith ball cleaning, : John Crane, thermo syphon vessel, volume 5 l. Stirring vesselsHermann WaldnerStirring vessels ...
General SKU227X153 MakePfaudler-Werke TypeBE-8000 No.39592 Year of construction1994 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume8000 Ltr. Motor13.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity9.367 l., (8.000l.) Vessel sizesDia. 2200x2100 mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connectionscheck OutletDN140 With jacketcheck volume 800 l. Max. temperature-35°C/+200°C With paddle stirrercheck twin paddle stirrer Motor13,5 kW, 500 volt, 1460rpm (EX) Speed mixing shaft70 rpm Glass Reactors MaterialGlass - Enamel (WWG-9115) Information Floorspace2,40x2,40 m Total height4,80 m Weight9.500 kg ATEX compatiblecheckGlass-lined ReactorsPfaudler-werkeReactors > Glass-lined ReactorsBrand > Pfaudler-werke Wha ...
General SKU227X152 MakePfaudler-Werke LocationBarneveld TypeBE-8000 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume8000 Ltr. Motor14.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity9.367 l., (8.000 l.) Vessel sizesDia. 2200x2100 mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connectionscheck OutletDN140 With jacketcheck volume 800 l. Max. temperature-35°C/+200°C With paddle stirrercheck twin paddle stirrer Motor10/14,5 kW, 500 volt, 725/1455rpm (EX) Speed mixing shaft70 rpm Glass Reactors MaterialGlass - Enamel (WWG-9115) Information No.58225 Year of construction1994 Floorspace2,40x2,40 m Total height4,80 m Weight9500 kg ATEX compatiblecheckGlass-lined ReactorsPfaudler-werkeReactors > Glass-lined ReactorsBrand > Pfaudler-we ...
General SKU245P316 MakeWerner + Pfleiderer (DE) Type175/120 No.231457 Year of construction1994 LocationBarneveld Main Features MaterialStainless steel Motor1.5 KW Specified Features - Sieve granulator Granulating sievecheck Gratercheck Sieve sizesdia.130mm x180mm Sieve perforationdia.2mm With hopperDia.500mm, h=300mm Inletdia.130mm Outlet200x120mm Motor1,5 kW, 220/380 Volt (Ex) With extra sieves(4x)dia.5mm, dia.2mm, dia.1mm MaterialStainless steel 1.4571 (316Ti) Information Mounted on mild steel framecheck Mounted on wheelscheck With switchcheck Floor space0,7x0,6 M Total height1,5 M Weight160 KG ATEX compatiblecheck Extra Specifications : : : : : : : : : : : : Sieve granulatorsWerner & PfleidererSieves > Sieve granulatorsBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared ...
General SKU454W1505 MakeWab Bachofen LocationBarneveld TypeMulti Lab Main Features MaterialStainless steel/Teflon Volume1.5 Ltr. Motor4 KW Specified Features - Sand mill MaterialPTFE (Teflon) Horizontal sand millcheck Capacity±1,5l Housing dimensions Dia. 100x215 mm InletDN15 OutletDN15 With jacketcheck Motor4 kW, 400 volt, 50 Hz, 2875 rpm Without ballscheck Information No.070715 Year of construction2007 With switchgearcheck Floorspace0,68x0,74 m Total height0,58 m Weight97 kgSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU444W1469 MakePfaudler LocationBarneveld CEcheck TypeRB-84-6820 Pressure Working pressure6.9 Bar Vacuum possiblecheck Working pressure jacket6.21 Bar Main Features MaterialGlass Volume6300 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity6820 L (Bruto 8410) Vessel sizesDia. 2134x2743 mm Dished bottomcheck Dished top sidecheck Manhole460 mm Top connectionscheck Outlet100 mm With jacketcheck 1137l Max. temperature-29/+200°C With propellor stirrercheck Motor15kW, 400V, 1467rpm (EX) Speed mixing shaft9-90rpm Glass Reactors MaterialGlass - Enamel Information No.22004338 Year of construction2016 Floorspace2,6x2,6 m Total height5,9 m Weight8935 kg ATEX compatiblecheck Extra SpecificationsPfaudler UK model. RB 84 model, ASME VIIIGlass-lined ReactorsPfaudler-werkeReactors > Glass-lined ReactorsBrand > Pfaudler-werke Wha ...
General SKU430W1391 MakeHermann Waldner LocationBarneveld CEcheck Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume500 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity687 l., (500 l.) Vessel sizesDia. 1000x1200 mm Dished bottomcheck ManholeDN350 Top connectionscheck OutletDN25 With jacketcheck With propellor stirrercheck Motor0,37 kW, 400 volt, 1430 rpm Speed mixing shaft95-136 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information No.5065 Year of construction2016 Mounted on legscheck and wheels With switchgearcheck Floorspace1,30x1,30 m Total height2,40 m Weight1100 kg Extra Specifications- with control panel on reactor (plug &: Play) - mirror polished inside Stainless Steel ReactorsHerma ...
General SKU339W1252 MakeCannon chemical plant ( refurbished bij Pfaudler) TypeGCD/AE6300 No.E239559/GR/FC Year of construction1987 (refurbished year unknown?) LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume6300 Ltr. Specified Features - Glass-lined Reactor Reactorcheck Capacity7020 ( netto 6300) Vessel sizesDia. 2000x2550 mm Dished bottomcheck OutletDN150 With jacketcheck volume 660 l Max. temperature-25/+230° With propellor stirrercheck 3-blade reteat curve Glass Reactors MaterialGlass - Enamel Information Floorspace2,4x2,8m Total height4,8m Weight6200 kg Extra Specificationsthis item is the body and the stirrer. Reglassed Base unit. Glass-lined ReactorsPfaudler-werkeReactors > Glass-lined ReactorsBrand > Pfaudler-werke What you can expect fro ...
General SKU339W1253 MakeTycon ( rebuild bij Pfaudler) TypeCE 10000 No.3957 Year of construction1990 ( rebuild 2019) LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume10000 Ltr. Specified Features - Glass-lined Reactor MaterialGlass - Enamel Glass Reactors Reactorcheck Capacity17100l (netto 10.000l) Vessel sizesDia. 2400x3100 mm Dished bottomcheck Dished top sidecheck ManholeDN500 Top connectionscheck OutletDN150 With jacketcheck volume 885 l Max. temperature-10/+200° With propellor stirrercheck 3-blade reteat curve Without motorcheck Information Floorspace2,8x2,8 Total height3,6 m Weight10,000 kg Extra Specifications this item is only the body ans stirrer. Reglassed reactor body Glass-lined ReactorsPfaudler-werkeReactors > Glass-lined Reactors ...
General SKU383W1174 MakeHermann Waldner LocationBarneveld Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume170 Ltr. Motor0.55 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity170 l. Vessel sizesDia. 800x850 mm Dished bottomcheck Top connectionscheck OutletDN30 With jacketcheck Max. temperature150°C With propellor stirrercheck Motor0,55 kW (380 V, 950 rpm (Ex)) Speed mixing shaft0-390 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information No.1389 Year of construction1983 Mounted on legscheck and wheels With switchcheck Floorspace1,00x1,20 m Total height2,40 m Weight500 kg Extra SpecificationsCoating inside, outside off jacket 1.4306Stainless Steel ReactorsHermann WaldnerReactors > Stainless Steel ReactorsBrand > Hermann Waldner What y ...
General SKU405W1265 MakeWAB Bachhofen TypeKD15 LocationBarneveld Main Features MaterialStainless steel Volume15 Ltr. Motor17.5 KW Specified Features - Sand mill MaterialStainless steel 1.4000 (410S) Sand mills Ball millcheck Capacity15 l., (12,5l.) Drum sizesdia. 200x410mm InletDia. 35mm Outletcheck Motor17,5 kW, 380 volt, 1450 rpm (EX) With variable speed drive1305 rpm Speed13 m/sek Information No.890289 Year of construction1989 With switchcheck Floorspace1,150x0,70 m Total height1,60 m Weight560 kg ATEX compatiblecheckSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU366W1291 LocationBarneveld MakePfaudler-werke Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Motor5.5 KW Surface1 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface1m² Capacity903 l., (800 l.) Vessel sizesdia. 1100 x 900mm Top connectionscheck Solids outletcheck Liquid outletcheck With jacketcheck Max. temperature-10°C/+200°C With stirrercheck Motor5,5 kW, 380 volt, 1445 rpm With variable speed drivecheck Stirrer can be liftedcheck With hydraulic unitcheck With pumpcheck MaterialGlass - Enamel Information TypeDR-filter Mach.No.50169 Year of construction1990 Mounted on legscheck With switchgearcheck Floorspace1,1x1,1 m Total heightCa. 4,75 m Weight1850 kg Extra Specificationswith bottom outlet valve. Nutsche filtersPfaudler-werkeFilters > Nutsche filter ...
General SKU204U055 LocationBarneveld CEcheck MakeK-tron Main Features MaterialStainless steel Motor0.45 KW Inlet diameter100 mm Specified Features - Metering screw MaterialStainless steel 1.4301 (304) Metering screws Metering screwcheck Screw diameter38 mm (2x) Pitch20 mm Shaft diameter22 mm Screw length350 mm With hoppercheck Capacity40 l InletDia. 100 mm Outlet2 x Dia. 38 mm With motorcheck With DC motor0.45 kW, 200 volt, 2000 rpm Screw speed120-600rpm With breaking/mixing shaftcheck Motorcheck Information TypeK2-ML-T35-DR-PU No.609481/913774 Year of construction9-2015 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace0,8 x 1,4 m Total height1,7 m Weight170 kg Extra Specifications- Scale LWF D5-S - Serial number # 11138195/267980 - Type WMOD -1200N-SFT - The control system has been removed from the enclosure. The machine is ...
General SKU216M063 LocationBarneveld MakeWinkworth Machinery Ltd Reading TypePV 2000/2 No.16509 Main Features MaterialStainless steel Volume2000 Ltr. Motor0.75 KW Specified Features - Stirring vessel MaterialStainless steel 1.4404 (316L) Closed stirring vessel(1x) Capacity2000 Ltr Vessel sizesdia. 1524x1502mm Dished bottomcheck Flat top sidecheck Manholedia. 500mm Top connections2x dia. 40mm + 2x dia. 50mm Outletdia. 50mm With propellor stirrermake Lightnin Motor0,75 KW, 400 Volt Information Year of construction2001 Mounted on legscheck Floorspace1,7x1,7 M Total height3,1 MStirring vesselsWinkworthStirring vessels > Stirring vesselsBrand > Winkworth What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The ...
General SKU354T1036 LocationBarneveld MakeWestfalia Separator AG TypeSB 7-06-076 Main Features MaterialStainless steel Motor4 KW Specified Features - Separator MaterialStainless steel CapacityHeavy liquid: 1 kg/dm³, Solids: 1,5 kg/dm³ Motor4 kW 380 Volt Max. rotor speed9210 rpm Inlet25 mm Liquid outlet25 mm Solids outlet121 mm Information No.1681 417 Year of construction1983 With switchcheck Floorspace1,2x1 m Total height1,2 m Weight410 kgSeparatorsWestfaliaCentrifuges > SeparatorsBrand > Westfalia What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU300P643 MakeManufacturing plate is missing LocationBarneveld Main Features MaterialStainless steel Volume450 Ltr. Motor3.3 KW Specified Features - Tumbler mixer Drum mixercheck Diameter600 mm Length/Depth1700 mm Cylindrical length1700 mm Inlet150 x 120 mm Outletø 230 mm With motor3,3 kW (400V, 2870 rpm (Ex)) With variable speed drivecheck Speed mixer± 75 rpm MaterialStainless steel Information Mounted on stainl. steel framecheck Floorspace2,9 x 1,1 m Total height2,1m Weight1500 kg Extra Specificationson wheels on lifting table Tumbler mixers-Mixers > Tumbler mixersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
length: 1200 mm width: 800 mm weight of the machine ca.: 0.55 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of boring spindles: 5 St. Working width: 20-230 mm Working height: 8-160 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cutting height: 125x220 mm machine weight ab.: 450 kg Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting width: 450 mm voltage: 400 V Weight: 5500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting width: 450 mm Weight: 5500 kg work height max.: 850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working area: 500x300 mm work height max.: 100 mm Weight: 120 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Feed motor: 5,5 kW total power requirement: 58,3 kw weight of the machine ca.: 4000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 180 mm Feed motor: 3 kW weight of the machine ca.: 2750 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working length: 1000-1600 mm Working width: 40-150 mm Thickness: 10-80 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Batch wet mill for the iron-free grinding of mineral suspensions. Lining (Al2O3) completely renewed in 2011. The mill and drive unit (18.5 kW bevel gear motor) are mounted ready for use on a stable base frame. Incl. sealing plug, drain tap / drain strainer and original documentation. Designed for a regrind filling of 3,900 kg and a ball filling of 3,350 kg. There are 2 identical mills available. Available for an extra charge: control cabinet incl. on-site control unit and grinding balls.
Dust suction hood: , mm Motor output: 4,1 kW Air consumption: für ÖL m³/h Weight: 250 kg Pump - Rotation speed: 3000 U/p. Min. Elektric 220 Volt: Oil - sucking off - car. Special price - without guarantee. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: / mm turning length: / mm swing diameter over bed slide: / mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Standard equipment: machine - Coordinate guidance for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamping claws - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for closing the claws - Ball tables - 2 parts flaps 500 mm x 500 mm - FocusLine - Nitro Line - FastLine - Express cylinder laser parts - Cinder cone detection TRUMP Lasers - Solid-state laser TruDisk 3001 with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - Laser control TruControl 1000 - Cooling unit - Laser logbook function cutting head - Solid state laser compact cutting unit - Control Line punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / r ...
grinding diameter: 390 mm grinding length: 650 mm centre height: 200 mm total power requirement: 46 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 3x3x2,4 m Universal cylindrical grinding – Type WUG21 (W27) Grinding length 650 mm EMAG Weiss stands for high-end technology in universal cylindrical grinding between centres. With its CNC-controlled WUG 21 machines, EMAG Weiss offers the right solution for virtually every user. --> Technical data Max. grinding length: 650 mm --> Centre height: 200 mm --> External grinding diameter: 1 – 390 mm --> Max. weight flying MK4: 100 kg --> Max. workpiece weight between centres: 250 kg --> Feed: --> X-axis travel: 480 mm --> Z-axis travel: 1.150 mm --> Workpiece headstock --> Tailstock --> Grinding spindle headstock --> Coolant device, manufacturer HYFRA, --> Belt filter, manufacturer Knoll, type KF 200 - year of manufacture 2012 ...
used
WMW PYE 250 ton Capacity: 250 ton Depth of throat -- ramcentre: 360 mm Max ram adjustement: 500 mm Drawning speed: 200 mm/sec Returning speed: 110 mm/sec Distance between table - ram: 1000 mm Ram area (L x D): 900 x 630 mm Eletric motor (power): 20,5 kW Weight: 8,2 ton
BINOVA WATER RING PELLETIZER, constructed in AISI 304 stainless steel, for HDPE LDPE LLDPE PC PP PS ABS, horizontal type, throughput rate 800-1200 kg/h depending on scraps and feeding rate, Users manuals, drawings, CE., Constructed in 2003, Offered checked and reconditioned, See how we recondition [HERE](.germanplast.eu/pages/what-we-do), availability: 5 weeks time, capacity: 1.500 kg/h, conditions: reconditioned
maximum number of results exceeded
please refine your search
