w d used for sale

Dimensions (L/W/H): 4000x1780x1750 mm Weight: 4400 kg Total power requirement: 39,75 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1106x883x543 mm Weight: 195 kg Total power requirement: 2,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3630x1790x1760 mm Weight: 4300 kg Total power requirement: 42,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3300x2100x2100 mm Weight: 1500 kg Total power requirement: 14 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 500x550x1050 mm Weight: 80 kg Total power requirement: 1,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 560x500x580 mm Weight: 80 kg Total power requirement: 0,75 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3300x2100x2100 mm Weight: 1500 kg Total power requirement: 20 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4600x1000x1550 mm Weight: 2500 kg Total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 800x650x450 mm Weight: 40 kg Total power requirement: 0,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3500x2100x1300 mm Total power requirement: 1500 kW Weight: 1200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3900x2500x1760 mm Weight: 1800 kg Total power requirement: 6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1200x750x1150 mm Weight: 50 kg Total power requirement: 1,05 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Availability: immediately Current Type: AC Operating voltage: 230V/50 Hz Control voltage: 24 V DC Rated current of the machine: 7.6 A Weight: 213 kg

used oven system / deck oven system, with 1 deck oven Wachtel Columbus E 920/324 TCOMFORT, 9 shelves, 180 cm wide, 200 cm deep (with touch control and gas burner), with 3 wood ovens Crosta 3.18.20, each 3 shelves (with pellets), with 1 loading and unloading Wachtel Comfort loader (with Wachtel WinServer), built in 2016, in bakery condition, for self-dismantling, ran perfectly until the end

Manufacturer: Wohlenberg • Machine Type: Paper Cutting Machine / Guillotine • Cutting width: max. 760 mm • Cutting height: approx. 120 mm • Year of manufacture: 2004 • Application: Cutting stacks of paper, cardboard, printing sheets in printing and bookbinding shops • Control: Electronic display, programmable cutting sequences • Equipment: air table, side tables, light barriers for safety, hydraulic press beam • Accessories: 4 x spare blades

Wölfer 90 kw Model: MDRKZF 280M-6/7 (SFB100/130FU) Serial No.: 492560 Type: 3~ AC Motor Year: 2014 Voltage: 0-690/690 V Current: 94/90 A Frequency: 0-50/150 Hz Speed: 0-986/2958 rpm Duty type: S3 – 100 % Power factor (cos φ): 0.85 / 0.91 Protection class: IP 56 Insulation class: F Mounting type: IM B3 (foot-mounted) Ambient temperature: – 25 °C to + 45 °C Brake: SFB100/130FU – 110 V DC Encoder: POG 10 N / 1024 ppr / T1000 Heater: 230 V – 200 W Standard: EN 60034 Weight: 910 kg Brand-new, never-used electric motor. Suitable for standard applications as well as port

turning diameter over bed: 1000 mm turning diameter over slide rest: 760 mm turning length: 6000 mm spindle bore: 82 mm turning speeds: 4,5-900 U/min faceplate: 1000 mm 3-jaw chuck: 500 mm steady: rapid traverse: total power requirement: 22 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 8x2x1,8 m Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Y ...

turning diameter over bed: 1000 mm turning diameter over slide rest: 760 mm turning length: 2750 mm spindle bore: 82 mm turning speeds: 3,55-710 U/min faceplate: 1000 mm 3-jaw chuck: 500 mm steady: 2 turning diameter in the gap: 1400 mm length of gap: 900 mm total power requirement: 22 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 8x2x1,8 m Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by ap ...

A twin screw extruder is offered. Drive: ASEA electric motor type ACA 200-6L, 50.5kW, 1460rpm. Inspection possible by prior arrangement.

Offered are 2 screw compressors with the following features per unit: Power: 15kW, pressure: 10bar, volume flow: 1950l/min (1.95m3/min), speed: 2930rpm, including sound enclosure, 1) year of construction 1989, operating hours: approx. 38100h, 2) year of construction 1986, operating hours: approx. 10600h. Inspection possible by appointment.

Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack crossbar: Shelving system: Bito Type: PRO The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Truss Type: PT170S Box profile: 170 x 50 mm Agraffe: 5 HK (hooks) Clear width: 3,600 mm Max. load per pair of trusses 4,000 kg, with the same weight. Distributed load 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting Note: Despite the holes, the functionality of the trusses is guaranteed! The trusses come from a BITO project with heat dust layers that are were screwed together! Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with  ...

Weinig Hydromat 23 four-sided planer 60m/min Working width 230mm Working height 160mm Number of spindles 5 Spindle layout: 1.Lower 15kw 2.11kw rights 3.Left 11kw 4.Upper 15kw 5.Lower 7.5kw Spindle speed 6000r.p.m Spindle Diameter 50mm 3 pulling rollers in the working table Inverter-adjustable feed speed up to 60m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation Machine dimensions 300x180x170cmH Weight 3500kg Net price 130.000PLN

Distance between centers: 500mm, center height: 140mm, turning diameter over bed/cross slide: 295mm/155mm, spindle bore: 36mm, speed: 3550rpm, tailstock taper: MK3. Machine dimensions X/Y/Z: approx. 1500mm/800mm/1250mm, weight: approx. 700kg. On site inspection is possible.

A conventional precision lathe Weiler is available. Distance between centers: 650mm, center height: 160mm, swing diameter over bed/faceplate: 320mm/190mm, spindle bore: 43mm, speed: 2500rpm, quill diameter: 40mm, quill travel: 85mm. Machine dimensions X/Y/Z: approx. 1800mm/900mm/1600mm, weight: approx. 1050kg. An on-site inspection is possible.

Dimensions (L/W/H): 2100x920x2250 mm Weight: 410 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2260x920x2250 mm Weight: 450 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3200x1000x2300 mm Weight: 630 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 250 mm material thickness: 2 mm diameter: 1200 mm total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Separator WESTFALIA SB 80-47-076 Features: Material V2A (AISI 304) 1.4301 Year of manufacture 1976

Features: Volume 2880 L Operating pressure 2 bar Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Overall height 2650 mm Height 1400 mm Diameter 1400 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description: Operating temperature 20 °C Topsoil: Clapper bottom 2 crane eyes T-piece with CIP line and pressure relief valve CIP Ball Tank cylinder: Level measurement at the top Manhole 350x450 mm Ladder hoes Flange Underbody: Clapper bottom 2 x drain in subfloor 4 trumpet feet, height-adjustable, with washers

A Wiese pendulum bucket elevator in Z-shape for gentle vertical and horizontal conveying of sensitive, light bulk materials (potato chips) is available. Particle size range: 50mm-60mm, max. conveying material temperature: 30°C, moisture: dry, bulk density: 0.07t/m³, conveying capacity: approx. 14.3m³/h, belt speed: 0.22m/s, max. bucket filling: 60%, belt material: EPDM, bucket width: 476mm, support roller diameter: 95mm. Lower edge discharge: 4960mm, feed vertical shaft center: 3490mm, vertical shaft center last discharge: 1675mm. Documentation available. An on-site inspection is possible.

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Memory-Funktion Weinig Powermat 600 Compact ---------------------------------------------------------------------- The machine has been cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----------------------------------------------- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine  ...

Type F-2 Thickness of panel 10-55 mm Edging thickness 0,4-2 mm Feeding speed 13 m/min Air pressure 0,8 MPa Total install power 10 kW Panel width ≥ 80mm With pre-milling Transport dimensions 3700x600x1250 mm Weight 960 kg

Full overhauled valve TEC JET 50 PLUS with no use after maintenance. Ready to send.

Rooftop Air Conditioner CLIMAVENETA WSM2-T 0354 106.2 kW Cooling capacity: 106.2 kW / 30.2 tons Year of manufacture: 2022 Options: Air filter, Wika air flow sensor, 2 pcs. Belimo damper actuators. Refrigerant circuit: 2 pcs. Heat exchanger: Copper / Aluminum Condenser: Copper / Aluminum Compressors: 4 pcs. Copeland scroll ZP104KCE-TFD-477 (scroll) Number of fans: 2 pcs. + 4 pcs. (centrifugal, EC-fans) Type of refrigerant: R410A Dimensions: 6.1 х 2.25 х 2.41 m Weight: 1780 kg Working hours: 0/0/0/0 h. Condition: Outlet, New

Working width: 220 mm Working height: 120 mm Working height 4-sided: 120 mm Number of Spindles: 10 Spindle arrangement: urlrlououuni Spindle diameter: 50 mm Spindle speed: 6000 rpm Counter bearings: 1-6-7-8-9 Jointer: 1-2-3-4-5-6-7-8-9 Motor powers: 7.5-7.5-11-11-11-15-7.5-11-11- kW Feed speed: 8-80 m/min Feed motor: 18.5 kW Feed: Hydraulic Table lubrication: automatic Weight: 9000 kg Space requirement: 700x160x140 mm Voltage/Frequency: 380V

Yamato 714 Multihead Weigher, Fully Stainless Steel | Rigidized |, Looking for a high-performance weighing solution for frozen or hard products? This Yamato 714 is a fully stainless steel, rigidized multihead weigher built for demanding production environments., Its flat feed chutes make it ideal for deep-freeze and hard items, preventing sticking or jamming. Optionally, we offer versions with angled chutes for lighter products such as vegetables or flat chutes for frozen products., The machine has been fully overhauled, thoroughly inspected, and is ready for immediate operation., ---------------------------------------------------------------, Specifications – Yamato 714, Weighing Heads - 14 heads, Weighing Range ~20 g up to 3,000 g (single dump); multi-dump possible, Speed - Up to 90 weighings per minute (product dependent), Chute Type - Flat chutes (ideal for frozen/hard product ...

arm length: 1600 mm tool adaptor: ja fabric-no.: 9787 weight: 4,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 80 KG, 33600 mm, 2150 mm

We offer: Shelving system, used partial quantities possible. Material: 17 double stand frames, approx. 2,150 mm 80 shelves, approx. 2,100 mm Depth of a shelf, 2 x 200 mm = 400 mm Load per floor: 80 kg from stock 21698 Harsefeld. Price valid only while stocks last. Subject to changes and errors.

x-axis: 5060 mm y-axis: 3200 mm z-axis: 1000 mm distance between columns: 2700 mm spindle motor: 22/26 kW spindle turning speed range: 6000 U/min rapid traverse: 15 m/min table-size: 5000 x 2400 mm workpiece weight: 18 t Control: FANUC 31i-MB total power requirement: - kW weight of the machine ca.: 45 t dimensions of the machine ca.: 12,6 x 6,5 x 4,15 m - CNC Control FANUC 31i-MB - Tool Changer 32-fold (BT 50) - 3 axes linear scales - Semi-auto universal head (C axis auto 5 degree indexing) - Extension head - Spindle oil cooler - Air conditioner for electrical cabinet - Hydraulic oil cooler - no coolant thru spindle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm continious capacity: 25 mm throat: 315 mm bore stroke: 200 mm bore depth: 280 mm spindle taper MT: 4 feed range: 0,1-1,5 U/min number of feeds: 9 column diameter: ca. 230 mm table-size: 700 x 600 mm surface area: 450 x 560 mm distance spindle/base plate: 1100 mm dimensions: ca. 1000 x 700 x 2400 mm total power requirement: 2,6 kW weight of the machine ca.: 1,1 t emergency stop switch renewed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Some small equipment is available. 1) Water treatment system BWT, year of manufacture: 2006, tanks: 2, max. operating pressure: 10bar, max. test pressure: 11bar, max. operating temperature: 50°C, volume: 48l, control system: BWT Soft-Control II. 2) Weishaupt burner L1Z-B, year of manufacture: 2008, power range: 70kW-415kW. 3) Wet cooler. An on-site inspection is possible.

A laminating machine Windmöller und Hölscher, without adhesive and coating unit, is available. Web width: 1420mm, coating width: 1400mm, max. roll diameter: 1000mm, max. roll weight: 1300kg, core inner and outer diameter: 76mm/95mm, max. mechanical speed: 460m/min, min. material thickness: 15mm, max. material thickness: 250µm, total machine dimensions X/Y: 19500mm/2500mm. The machine was used as a rewinder. Documentation available. On-site inspection is possible.

number of spindles: 4 Stk bore capacity in steel (diameter): 25 mm spindle distance: 475 mm table-size: 450 x 1900 mm morse taper: MK 4 total power requirement: 10,2 kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC portal milling machine TYPE: LF3550/4000CS Year of manufacture: 1966 / overhauled 2010 Manufacturer: Waldrich Siegen Control: CNC840D-Powerline Routes: X-axis 14,000mm table longitudinal Y-axis 4.480mm slider-transverse Z-axis 3,000mm crossbeam vertical W-Axis 300mm Quill Vertical Max. Passage: transverse 3.200mm high 3.800mm Machine table: Length 14.770mm Width 3,100mm max. table load: 145 to Quill: Tool Taper: ISO60 Power: 100KW Max. torque: max. speed 600 rpm Rapid traverses: X-axis 12m/min Y; Z-axis 6m/min Attachment heads: Voltage: manual Description: Right angle milling head (ISO60) Orthogonal milling head (ISO60) Notes: Table guide hydrostatic

Key data: 5 , 450 mm, 120 mm

TECHNICAL DATA: Working width: 450 mm Working height: 120 mm Milling spindle: Ø 40 mm Planing spindle: Ø 50 mm Lower planing spindle with counter bearing Number of spindles: 5 Installed capacity: 56 kW SPINDLE CONFIGURATION: 1: bottom (11 kW) 2-3: right-left (11 kW) 4: upper (11 kW) 5: bottom (11 kW)

Used hot air generator with oil burner Ready for operation at the site

Deze watertank is geschikt voor de opslag van drinkwater en vele andere vloeistoffen. De tanks hebben een wanddikte van circa 6 mm. Aan de boven- en onderkant van de tanks kunnen aansluitingen voor inlaat en uitlaat worden aangebracht. De tank wordt geleverd zonder gemonteerde aansluitingen. Maximale inhoud: 3000 liter Diameter: 1450 mm Hoogte: 2050 mm Gewicht: 70 kg Afmeting deksel: 400 mm 2 exemplaren beschikbaar

Deck Oven Quail Piccolo I-3 - Manufacturer: Wachtel - Type: Piccolo I-3 - In-store baking oven with 3 shelves, 1 proofer, 1 exhaust hood - Inner dimensions per floor: 60x80cm, suitable for 1 tray 60x80cm or 2 trays 60x40cm - Each floor can be controlled individually - Each floor with steam function / steam function - Each floor with top and bottom heat, separately controllable - Control: IQ Touch control - Shelf height approx.: 16cm Technical data; - Electrical connected load: 16.4 kW - Voltage: 400 V AC/3Ph/N/PE/50Hz - Year of construction 10/ 2019 - External dimensions approx. : 98x135x202cm WxDxH