130,793 used machines on RESALE, but how to find them? Machine Search
Witzig & Frank high-speed radial drilling machine LEO 32 AS Defects: (clamping no longer works, running noises present)
Measuring machine Wenzel Smart CMM 1000 Year of construction 2010 Travel: X axis: 1000 mm, Y axis: 450 mm, Z axis: 400 mm Good condition
Height=0.96 m, Overall length= 1.2 m, Overall width= 1.2 m, Net weight= 120 kg,
Height=1.6 m, Overall length= 1.3 m, Overall width= 0.8 m, Net weight= 290 kg,
Height=2.95 m, Overall length= 1.5 m, Overall width= 2.76 m, Net weight= 1900 kg,
Dishwasher Winterhalter GS 650 Energy+ Winterhalter Model: GS 650 - Floor-standing machine, stainless steel version - 3 washing programs - Powerful pump - 1 washing basket - Rinse Pump & Cleaner Pump large tank with Energy+ heat exchanger Connection 400 V, 32A-CEE plug Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Water Delivery Maintenance contract Service Package E-Box for more safety Instruction & Commissioning
Key data: 200 mm
Face plate 200 mm, partial accuracy +/- 15", incl. Servo motor with hydraulic clamping Fixed tailstock Tip height 200 mm
Key data: 165 mm, 330 mm, 2800 U/min
WEILER Condor lead and pull spindle lathe (overhauled) Circumferential diameter over bed 300 mm Center width 800 mm Turning diameter over carriage 170 mm Gr. workpiece weight between the tips 100 kg Bed width 240 mm Spindle bore 38 mm Spindle speeds 24 - 2800 rpm Spindle motor 3 KW Z-travel 800 mm X-travel 170 mm Z1-travel 100 mm Lead screw diameter 24 mm Thread pitches: 35 Metric 0.35 - 12 mm 40 Witworth 2 - 45 Gg / " 25 Module 0.2 - 4 Module 32 Diametrical Pitch 5 - 90 D.P. Tailstock quill stroke 110 mm Tailstock quill diameter 50 mm Tailstock quill cone 3 MK 2-axis digital display 3-jaw chuck Multifix holder B with 8 cassettes Rotating grain tip Tailstock Thread Device: Metric, Witworth, Module, Diametral Pitch Geometrically outdated!
weight max.: 20 t workpiece diameter: 300 - 3600 mm Turning speed: 70 - 1200 mm/min roll diameter: 350 mm Wheel width: 110/175 mm drive motor: 2 x 0,55 kW total power requirement: 1,1 kW weight of the machine ca.: t dimensions of the machine ca.: 2,5 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with steel rolls, manual adjustable roller spacing, • one roller unit with twin drive with variable adjustable rotational speed, • one roller unit without drive. • CE-marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 415 l 0: 280 mm weight of the machine ca.: 1,5 t total power requirement: kW dimensions of the machine ca.: m charge load: : for excavate machine without flywheel drive motor and frequenzy regulator gross working tank volume: 600 liters useful volume: 415 liters largest possible workpiece dimension (measured diagonally): 280mm total weight: 1140kg drive power at 1500 rpm: 4kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2500 mm z-travel: 1600 mm w-axis: 800 mm b-axis: 360 ° table:: 1800 x 2200 table load: 25 t feed range: 10000 mm/min spindle turning speed range: 10 - 3000 U/min spindle taper ISO: 50 spindle motor: 37/46 kW rapid traverse: 10 m/min Control: Heidenhain TNC 640 total power requirement: 70 kW weight: 38 t range L-W-H: 8,5 x 8,6 x 5,5 mm Equipped with: - Heidenhein iTNC 640 CNC control & HR 510 handwheel - HUI 50 automatic milling head - 40-position tool changer (ISO 50) - B-axis in rotary table - Heidenhain optical scales - NC rotary table - Coolant system with paper belt filter, Coolant through Spindle 20bar - Chip conveyor - Heidenhain TS 460 measuring probe - Movable operating platform - Pfannenberg oil cooler - Central lubrication ca 4450h Spindle Hours The data for this ad was created with ModulMWS - the software solution of Logo ...
These are a few key data. - CNC universal cylindrical grinding machine WUG 21 basic machine from CNC-Technik Weiss. (The WUG 21 is a Karstens machine bed on which the CNC is built.) - Year of construction 2008 / max. single-shift - 1000mm tip width - Workpiece headstock and tailstock MK4 - Disc Ø up to 500mm - Lens position 26.5° inclined - Grinding wheel drive with programmable SUG - Grinding headstock can be swivelled manually on air cushions - Window right - Internal grinding device mounted on the back incl. dressing device - Eckelmann control system - DIN programming - Cycle programs - Manual grinding, yes - Automatic dressing - Marposs structure-borne sound for external grinding wheel incl. software package - Grinding wheel spindle and workpiece spindle with V-belt drive
gear hobbing diameter - external: 1200 mm gear hobbing diameter - internal: 1200 mm gear hobbing width -max.: 260 mm control: Liebherr PC-NC max. workpiece diameter: 1500 mm table diameter: 900 mm table bore diameter: 320 mm max. table load: 95 kN power capacity: 30 kW coolant pump: 120 l/min Axial distance between thrust spindle - table: 0-820 mm Shaping spindle diameter: 125 mm tool taper: SK 45 DIN weight of the machine ca.: 26 t dimensions of the machine ca.: 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 260 mm stroke: 8-100 mm ram - range of adjustment: 63 mm no. of strokes: 115 Hub/min : 316 mm table surface area: 630x490 mm ram surface: 315x260 mm hole in the table: Ø 140 mm total power requirement: 4 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dates to follow The sale is carried out on behalf of the owner from the current location in the "current state"
Cooling capacity: ? W volume capacity: ? m³ / h Packing: 0,65 0,80 1,15 m Shipping weight: ca. 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
KRONEN GEWA 2600V – Fully Refurbished Vegetable Washing Machine, We are offering a Kronen GEWA 2600V vegetable washing machine in excellent condition, fully refurbished and ready for immediate use., Refurbishment Details:, - Completely overhauled by professionals, - Fitted with a brand-new original pump, - All parts inspected, cleaned, and tested, - Machine runs smoothly and efficiently, Features:, - Efficient vegetable and salad washing system, - Gentle product handling through whirl washing principle, - Made of high-quality stainless steel, - Ideal for food processing companies, - Location: Emmeloord, Available Immediately, Invest in a high-quality machine with the reliability of KRONEN – now with the added value of a full refurbishment and a new pump!, For more information, photos, or to schedule a viewing, please contact us.
ID3648 Willibald SR5000 year/Bauahr 2001 approx. 7150 hours/hours 18 t Shredder for wood/green waste, magnetic separator Shredder for wood/green waste, magnetic separator
pressure: 100 t throat: 375 mm stroke: 20-125 mm no. of strokes: 60 Hub/min ram - range of adjustment: 80 mm table surface area: 920x660 mm ram surface: 700x450 mm hole in the table: Ø90 mm tool hole in ram: Ø50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 2100x1500x3300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 2 mm, 17
Twin screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine No.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx. 30 1/min. Worm torque: 10,000 Nm Motor power: 3.3 - 25.0 kW, Drive motor: Commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool Heating Zones: 8 Temperature control: 12 x digital temperature controller KS 40 (PMA) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tools) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material funnel and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hoppe ...
Salt spray test by Weiss Salt Spray Test Chamber with Corrosion Testing Specifications: Test chamber capacity 480 l max. load 100 kg Brine storage tank 180 l Applications: Corrosion tests: Salt spray test: Room temp. up to +50 °C Condensation water test: Room temp. up to +45° Extensive documentation available incl. wiring diagram, parts list, manual, etc The plant is still fully functional. It is located in a research facility and has rarely been used.
cutting machine 2007 width 115 cm with monitor touchscreen USB interfaces CIP3 + CIP4 compatible ethernet interface Saddle Positioning via Joystick ergonomically arranged Two-Hand Operation press beam stop function programmable pressing force automatic pressing safety light grid plexiglass protection on the rear table stainless steel tablework surface air table side air table in production available: immediately located: Germany
Key data: 5980 , 6900
Available complete natural gas power plant of a Wartsila 18V34SG. The engine stopped running a full load with all the maintenances done. The aeros for the cooling system are not included, only the exchangers. Brand: Wartsila Model:18V34SG Brand Generator: ABB Power: 5980kW Fuel oil: Natural Gas Yom:12/1999 RPM: 750 Hours:133000 hours We can have 1 more units.
Harms Wende Schweißtechnik HWG2708SK-01 HW2000 Control Manufacturer: Harms Wende Product Range: Welding Technology Type designation HWG2708SK-01 Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!
CONTROLS conventional PRESS DESIGN drive system: eccentric / crank frame design: C-frame, single sided PRESS FORCES total force (nominal): 100 to SLIDE slide force: 100 to stroke rate (max.): 72 /min SLIDE (MECHAN. PRESS) slide adjustment: 80 mm stroke adjustment: yes stroke min.: 8 mm stroke max.: 112 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 407 mm ATTACHMENTS (PRESSES) 2-hand engagement: yes for safe tools only
In-store baking oven WIesheu Type: Dibas Duo Dibas 64 blue S + Dibas 64 blue L 10+5 editions for 60×40 cm trays digital control Self-cleaning program Door with internal sliding mobile on castors Checked & cleaned, very good condition Specifications: Year of manufacture: 08/2016 400 V – 50 Hz Dimensions: Height: 215 cm Width: 95 cm Depth: 100 cm
Manufacturer: Wagner / J. Wagner GmbH Type: SuperFinish SF 23 Plus Voltage: 230 V AC Frequency: 50 Hz Motor power: 1.3 kW Maximum flow rate: 2.6 l/min Maximum operating pressure: 180 bar Maximum nozzle size: 0.023" Weight: 29 kg Technology: Diaphragm pump (airless) Suction: Top tank or rigid suction system Workable materials: varnishes, primers, glazes, impregnations, oils Special: Brushless motor, low-maintenance, robust design for professional applications
turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - in very good condition () particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty t ...
turning length: 800 mm turning diameter over bed: 330 mm turning diameter over slide rest: 170 mm turning speed range: 24 - 2800 U/min spindle bore: 38.0 mm centre height: 165 mm total power requirement: 3.5 kW weight of the machine ca.: 850 kg. dimensions of the machine ca.: 1850 x 800 x 1700 mm from a vocational school - in good condition () particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - TRIPAN steel holder with 3x inserts - Sliding tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - EMERGENCY stop button - Operating instructions The data for this ad ...
Manufacturer: Wurz Energy Year of Manufacture: 2009 Type of Machine : 340 CHP (Combined Heat and Power) Diesel Generator Set Electrical Power: 340 kW each Thermal Power: 346 kW each Engine: SCANIA DC16-RP Control System: SIEMENS / SCANIA CAN BUS Fuel Consumption: up to 245 g/kWh Fuel: palm oil, rapeseed oil, biodiesel, diesel Operating Hours: 10–13 each (maintenance only) Condition: New, unused Container: 20 ft, approx. 9,500 kg each Find more here - / Contact us at -
Grinder Manufacturer: Kramer Grebe Wetter Model: Grinder 160mm Integrated lift for ergonomic operation Made of stainless steel Lowest noise level Easy cleaning Rated power: 36 kW Control voltage: 24/230 V Operating voltage: 400 V / 50 Hz Total nominal current: 63 A Fuse protection: 80 A
A 4-color central cylinder printing system WDB Systemtechnik is available. Printing units: 4, ink type: UV, max. material width: 650mm, max. printing width: 600mm, printing length range: 300mm–800mm, max. printing speed: 250m/min, material types: PET/OPP/aluminum/laminate/composite materials, material thickness range: 20µm–150µm, max. unwind and rewind roll diameter: 1000mm, operating hours: 28h, printed length: approx. 57000m. System components: unwind and rewind unit, corona, UV dryer, drying channel, IR heater, cooling unit, and supply and exhaust air fan. Including lamination unit. Documentation available. An on-site inspection is possible.
spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2000 mm z-travel: 1250 mm w-axis: 800 mm b-axis: 360 ° table:: 1800 x 2200 spindle turning speed range: 3000 U/min feed range: 4 - 3000 mm/min table load: 12 t spindle taper ISO: 50 spindle motor: 37 kW rapid traverse: 10 m/min Control: Heidenhain iTNC 530 b-axis: 360 ° total power requirement: ca 70 kW weight: 36 t range L-W-H: 8 x 8 x 3,5 m equipped with: - CNC control Heidenhein iTNC 530 & handwheel - clamping table 1800 x 2200mm, 12t -- full B-axis with 360,000 positions - coolant - IKZ 20bar & extern cooling - BLUM TC 60 Taster - without chip conveyor ca 11500 Spindle Hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
"EIAA x BATES :: Certified Preowned" We can offer you permanently revitalized filling systems for all areas of application. OFFER from a customer: Wagner filling line (screw packer) for valve bags with internal or external valve, made of paper / PE Machine was completely overhauled in 2025: New pneumatics New electrics New control cabinet with new components, e.g. control system (Siemens LOGO!) - manufacturer-independent New software - manufacturer-independent New weighing electronics (B+L dataPond 3F, high-speed, legal-for-trade) Parts made of stainless steel that come into contact with the product (product flap, pressure chamber, filling tube) Filling pipe for approx. 145mm valve width - conversion to other valve width possible if necessary Filling tube tapered to make it easier to attach the empty bags Steel construction newly powder-coated Schematics, diagrams n ...
turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - in very good condition () particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty t ...
turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - in very good condition () particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty t ...
SPECIFICATIONS: Machine inlet: 1970 mm Working width: 230 mm Working height: 120 mm Spindles: Ø 40 mm Number of Spindles: 6 Shaft drive Installed power: 38 kW Voltage: 380 V SPINDLE CONFIGURATION: 1: bottom (4 kW) 2-3: right-left (11 kW) 4: top (7.5 kW) 5: bottom (5.5 kW) 6: universal (5.5 kW) EQUIPMENT: Miscellaneous Accessories
SPECIFICATIONS: Feed length: 1980 mm Working width: 220 mm Working height: 120 mm Spindle: Ø 40 mm Number of Spindles: 8 Shaft drive (7.5 kW) Installed power: 64 kW Voltage: 380 V SPINDLE CONFIGURATION: 1: bottom (5.5 kW) 2: right (5.5 kW) 3: left (5.5 kW) 4: right (5.5 kW) 5: top (7.5 kW) 6: bottom (7.5 kW) 7: top (11 kW) 8: bottom (7.5 kW) EQUIPMENT: Complete with accessories
Tenoning spindle: 1 St Number of milling agregates: 4 St. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled -------------------------------------------------------------- The machine was factory overhauled by Weinig in 2024. The control system was also upgraded to a Siemens S 7 677 C, with a new membrane panel Touch. With the following machining units: Crosscut saw -------------------------------------------------------------- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ------------------------------------------------------------- Axially adjustable with crosscut saw Tenon and slotting spindle -------------------------------------------- ...
Item Condition: In Operation Availability: immediately Availability: immediately Viewing: by arrangement Location: Germany / Essen Technical data: see picture 3
Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min. total power requirement: 27 kw Dimensions (L/W/H): 3900 x 2200 x 2000 mm weight of the machine ca.: 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ------------------------------------ Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) -------------------------------------------------------- General ------------------------------------ > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 m ...
Working width: 230 mm Working height: 15-120 mm Number of spindles: 2 St. Weinig Hydro Planer Type Uniplan 23 -------------------------------------------------------------------- Machine was factory overhauled by Weinig in 2024. Description: For two-sided horizontal woodworking with two working spindles. Spindle arrangement: horizontal, bottom and top. The two horizontal spindles are equipped with hydraulically tensioned counterbearings without axial adjustment. Built-in straight jointers on both spindles with automatic stone feed, remotely controlled with the hood closed. Machine with continuous, chainless feed, equipped with rubber rollers. Electric up/down adjustment of the spindles according to a mechanical digital display (SIKO). On/off switch for limiting the up/down adjustment. Feed roller pressure pneumatic. Stops and table tops are not adjustable. Machine with steel table tops. ...
working length: 3600 mm Working width: 1500 mm Working height: ca. 900 mm WEINIG Return Conveyor System RF15 ----------------------------------- Can be used after moulders, planers, and milling machines with a maximum feed speed of approx. 22 m/min. Technical Description: Workpiece length: 250 - 3,600 mm Workpiece width: 30-230 mm Longitudinal-transverse conveyor with two integrated, driven roller conveyors: Transverse conveyor path 1,500 mm Constant conveyor speed: 30 m/min Roller conveyor length 2,200 mm Return roller conveyor (non-driven) to the operator (Technical specifications according to the manufacturer - without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of spindles: 8 St. Working width: 230 mm Working height: 120 mm Weinig Planing and moulding line ------------------------------- Consisting of the following individual machines: Item 1: Weinig Profimat 23 E, four-side planer, stock number: 2803 5 spindles + glazing bead saw Item 2: Weinig Uniplan 23, stock number: 2804 Fine and hydroplaner with 2 horizontal spindles Item 3: Weinig RF 15, stock number: 2805 Longitudinal-cross-longitudinal conveyor with workpiece return to the operator Detailed descriptions of the machines can be found under the mentioned stock numbers. (Technical specifications according to the manufacturer, without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2990 mm table width: 1490 mm table height: 850 - 900 mm weight of the machine ca.: 0,8 t Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.5 mm over 1000 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mm table width: 1200 mm table height: 850 - 900 mm weight of the machine ca.: 0,65 t Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.4 mm over 1000 mm. The table can be moved with a pallet truck. Pallet truck is not included. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fuel: Natural gas, power range: 100kW-1000kW, connection pressure range: 15mbar-500mbar, NOx class: 2. An on-site inspection is possible.
turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - in very good condition () particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating ...
Fat Baker Riehle Wendomat 48 Riehle Model: Wendomat 48 Immersion basket for max. 48 pieces Dispensing Device Manual 1 stainless steel proofing trolley with tilting frame Temperature controller with safety thermostat Steam lid, drainer tray Output approx.: 480 pcs/h Stainless steel version, mobile Connection 400V, 16A-CEE plug Occasion
maximum number of results exceeded
please refine your search
