w 350 used for sale

Aluminum circular saw, miter saw, glass bead saw, aluminum saw, underfloor aluminum miter saw machine -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 350 mm -Drive: kW -Speed: 900/1700 rpm -Dimensions: 900/520/H1280 mm -Weight: 150 kg

grinding diameter:80-260 mm total power requirement:50 kW weight of the machine ca.:15 t dimensions of the machine ca.:12,5x3x2 m workpiece length - max.:10000 mm min. workpiece diameter:80 mm max. workpiece diameter:260 mm grinding wheel diameter:350 & 400 mm For external cylindrical grinding. Rebuilt from a conventional lathe with a CNC controlled grinding support. Year of manufacture Basic machine: 1965 / CNC conversion: 2013 KSS - System: Knoll compact filter unit KF110/700

A complete ventilation system used in food production is available. The system consists of 2 main parts: (1) WK-WD 101 and (2) WK-W 41. Air flow capacity (1)/(2): 8000/1500 m³/h, external pressure (1)/(2): 500 Pa/350 Pa. Fan type (1)/(2): THLZ 400/ER35F-2DN.C5.1R, filter (1)/(2): TK G4 7.3 m² / TK G4 2.5 m². Sound level (1)/(2): 86.5 dB / 71.7 dB. Additional for (1): Heat recovery unit diagonal flow, frost protection thermostat up to 200°C. Additionally for (2): Cooler-evaporator, Danfoss VLT 6003 HVAC, silencer baffle. Documentation available.

Wittmann Accessories Type: W620M -636, Robot System Control: C61-585 Built: 2003 Dimensions and weights Machine weight Kg: 500 Other Removal X- Axis 300 mm PNE Vertical Y- Axis 1000 mm PNE Horizontal Z-axis 1250 mm MOT

Waldrich-Coburg leadership roads and surfaces sanding machine type: 0-15 SNC 2520 X/3 m Max.-Schleiflaenge: 3420 mms Max.-Schleifbreite: 1450 mms Max.-working height: 1005 mms Aufspannflaeche length: 3000 mms Aufspannflaeche width: 1250 mms accessories: -table fine adjustment -Papierbandfilter-Anlage -Schipmke-Haan DK150 V - back chill arrangement surface need: L=11,8m B=4,9m H=4,7m weight: 29.4 to . their prize image we await with pleasure. OTHER: the machine still stands live and can be visited any time.

2 units Wartsila gas engines Model W16V34SG Make Wartsila, Finland Installation date G3 - 31/03/2011 & G4 - 26/03/2011 Rated output (kW) 6375 Rated speed (RPM) 750 Number of cylinder 16 Nos. Swept volume via cylinder(dm3) 36.3 Compression ratio 12:01 Mean effective pressure (bar) 19.8 Mean piston speed (m/sec.) 10 Cylinder bore X stroke (mm) 340 X 400 Cycle stroke four stroke Starting system compressed air (30 kg/cm2) Supercharging system exhaust gas turbocharger Lubrication forced lubrication (engine driven pump) Fuel natural gas Configuration V type Generator make AVK Generator nominal output (kVA) 7968 Voltage (kV) 6.6 Frequency (Hz) 50 Power factor 0.8 Operating hours 13,500 each since installation in 2011.

Robot WITTMANN W643, Control: CNC 6.2 Horizontal axis Z : 10000mm Demoulding axis X : Robot 1: 1200mm, Robot 2: 1200mm Vertical axis Y : Robot 1: 2600mm, Robot 2: 2600mm 2 vacuum, 3 pressures Euromap 12

Make : Wolf Type: WLE-S-180 Built: 1993 Dimensions: 1.3 m x 2.2 m x 2.6 m (approx. WxLxH) Heating unit: 209 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 14,000 m3/h; 7.5 kW; 1435 rpm Location : Camp Herzogenaurach Sales price: € 2,990,- net, from location This plant is already on sale, similar we have in stock. We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please contact us, tel. 0171-9508841.

1 x Wickert 500ton upstroke vacuum press, Type: WKP5000/5/3, Year of manufacture: 1997, Machine Number: 2885 with 500mm x 500mm electrically heated platens, sliding bottom platen with ejector table, Daylight: 340mm 400/690V, 50Hz, 22kW. Heaters 12.5kW, Pressure 300 Bar Fixed guarding to rear, SICK light curtain guards to the front. With Siemens S5 PLC controls. In very good condition.

White Temperature Chamber Here we offer a white temperature chamber. White temperature chamber water-cooled Temperature range: from - 70°C to 180°C Temperature change rate cooling 10 K/min Temperature change rate heating 10.0 K/min Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity spatially ± 0.5 to ± 2.0 K Test room dimensions: width 580 mm x depth 615 mm x height 750 mm Housing dimensions: width 895 mm x depth 2080 mm x height 1950 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 14 kW Rated current 26 A Refrigerant: R-404A R-23 Weight: approx. 450 kg Control panel has been updated to a 24 volt version Type: WT11-270/70/10 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with le ...

White temperature cabinet Here we offer a white temperature cabinet. Air-cooled White temperature cabinet with S! MCON / 32 controller Test room capacity : approx. 195 litres Test room dimensions: height 750 mm, width 580 mm, depth 450 mm, External dimensions: height 1775 mm, width 870 mm, depth 1600 mm, Data for operation: Test room lighting halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 14 A Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation temporally in the middle of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4 K/min Cooling: 4 K/min Heat compensation max. 2300 W Refrigerant: R404 A 2.5 kg Gwicht : 490kg Type: WT3 - 180/40 For you as a buyer for security the following information! The following points are  ...

Current stock: approx. 400 pcs. Included in delivery are: 01x castor, used Manufacturer: Wicke Type: 01 Material color roll: cream white Material color frame: sendz. galvanized Specifications: Total height: approx. 100 mm Rolls Ø: approx. 80 mm Roll width: approx. 35 mm Tire Material: PA6 Plate abbreviation: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.556 kg Advantages to PA wheels: - The PA wheels are very low in wear. - They leave no traces on the ground. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery ...

Current stock: approx. 370 pcs. Included in delivery are: 01x Bockrolle, used Manufacturer: Wicke Material color roll: cream white Material color frame: sendz. galvanized Specifications: Total height: approx. 150 mm Rolls Ø: approx. 125 mm Roll width: approx. 40 mm Roll material: Polyamide Plate abbreviation: approx. 102 x 87 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.745 kg Advantages to PA wheels: - The PA wheels are very low in wear. - They leave no traces on the ground. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of deli ...

Current stock: approx. 53 pcs. Included in delivery are: 01x Bockrolle, used Manufacturer: Wicke Type: 01 Material color roll: cream white Material color frame: sendz. galvanized Specifications: Total height: approx. 100 mm Rolls Ø: approx. 80 mm Roll width: approx. 35 mm Tire Material: PA6 Plate abbreviation: approx. 100 x 85 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.370 kg Advantages to PA wheels: - The PA wheels are very low in wear. - They leave no traces on the ground. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery ...

Gritter Küpper Weisser STA 95 W20 B, attachment device for Unimog, truck etc. driven by B & S petrol engine. Content 2.0 m. equipment: without plan retractable roof. Weight 800 kg. Not functional, corrosion, engine goes on strike - unaudited. With controller and documentary. More spreaders and winter maintenance technology stock! -Jacobis local, environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

CNC lathe Webo Roeperwerk in single parts! Machine coerper no longer available! Only spare parts / parts according to the description below. Type Weboturn 400 Control Siemens System 3T ( CNC 3T) items can be shipped, e.g. - Spindle verstaerker - Achsverstaerker, - CNC control, boards etc. - Monitor No longer available: 1. Main spindle with spindle stick 2. Riding stock 3. Ball roller spindle of the x-axis All photos of the machine, control and the boards can be requested on request. The price of the additional information refers to the main spindle motor with Achsverstaerker as described above. Special price

Wave grille loom: working width: max. 3,000 mm wire rod: 2.0 - 7.0 mm mesh widths: 8.0 - 100 mm Kripper: wire staerke range: 1.5 - 7.0 mm feed speed: max. 28 mtr./min; ready for use

crimped mesh loom: working range: max. 3.000 mm wire diameter range: 2,0 - 7,0 mm mesh width: 8,0 - 100 mm crimping machine: wire diameter range: 1,5 - 7,0 mm wire feeding speed: max. 28 mtr./min; ready for operation

Piston, including connecting rod Part number: 110300 / 1101000

Now available: Wartsila 32 (original) cylinder heads reconditioned Cylinder heads are pressure tested and come with Class certificate Available from stock (ex Warehouse Bengi NL) Price upon request

-Peak height 240mm -Peak width 1000mm -Control Siemens -Circular permes.about bed 490mm -Umlaufdurchmes.ü.Planschlitten 195mm -Crumpling 520mm -Spindeldurchmes.im in front. Bearing 100mm -Spindle bore 63mm -Torque 736Nm

Universal milling machine make WENIG type Wemas 6Fabr. -No: 1347, built in 1998Table clamping surface: 230 x 1000 mmTravel length X: 555 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0transver se Y: 230 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0vertical Z: 420 mmFeed rates along X: 16 - 190 mm / minRapid traverses along X: 1620 mm / minTable can be swiveled: + - 45 °Milling spindle: ISO 40Spindle speeds: 12 - 1138 rpmVertical head swiveling: + - 45 °Distance vertical spindle - table: 0 - 290 mmHorizontal spindle: ISO 40Spindle speeds: 52 - 1138 rpmDistance horizontal spindle - table: 0 - 420 mmDistance spindle - counterholder: 120 mmDrive power: 6 kWWeight of the machine: 1.1 tExternal dimensions L x D x H approx: 1040 x 1000 x 1730 mmWith- Horizontal milling device- Vertical milling head (separately in box)- various accessories- fixed operator panel- ...

Ladies and gentlemen, below we offer the following machine for sale: from a tool making, single-layer run and very well maintained. Still under power. CNC lathe Voest - Alpin - Weipert WNE 490 X 1000, peak height 240mm, tip width 1000mm, control Siemens, circulating through mes.over bed 490mm, circulating permes.via plan slide 195mm, crimping 520mm, Spindeldurchmes.im front. Bearing 100mm, spindle bore 63mm, torque 736Nm.

Sell a winding number knife, which is Comes. Winding number measurement Measuring range 1-100 000 Wdg. divided into decades 101; 1110; 11100; 111000 Wdg. Multiplication factor x0.1; x1; x10 Measuring frequency switchable 50/60Hz Measurement uncertainty +/- 0.3%Wdg / 0.1Wdg in the case of windings covering the yoke on an equal scale for part u chamber windings up to +0.6% Display sensitivity for a rash of 1% of the year approx +/-0.1% +/-Wdg.

Make: WEGER Type: AL 96 Built: 1999 Power: 6700 m3/h Current consumption: 7.65 A 2 pieces Available Price on request Contact details can be found under Contact

White SC/KWT 1000 - Test chamber volume 1000l - Test chamber dimensions height with hood: 1190mm - without hood: 740mm - Width: 1560mm - Depth: 570mm Outer dimensions: height: 1370mm, width: 920mm, depth: 800mm Brine tank: 180l Temperature range: - Salt spray test: 5K above ambient temperature up to +50°C - Condensation water test: 5K above ambient temperature up to +45°C Humidity range at SC/KWT : Room humidity/saturation Air flow rate with salt spray test 2m³/h Air flow rate for standard climates: 7m³/h Compressed air min.4bar/ max 10bar Connection 1/4 inch Connection 208-240V 2.6kV 220kg Standard Type series SC Options Type Series SC and SC/KWT Ventilation device for DIN 50 014, paragraph 5 Room tem pe - ratur (standard on SC/KWT) Desalination plant Compressed air unit Precipitation collectors Precipitation recording and display Measurin ...

Complete 48 MW Westinghouse W251-B11 Gas Turbine with a Brush electric generator, 3000 rpm, 50 HZ, 11.5 KV,

sour cream filler in plastic cap fi 75, manuf. by Waldner Dosomat 2,4 Germany. Manuf. in 1998 but in very good condition. Capacity 2.000-3.000 cups per hour. The filler includes cups feeder, aluminum foil capper and date printer. Siemens 5 PLC controller.

Walter WDPP-410 edger – Polish production – DTR, CE TECHNICAL PARAMETERS: min. length of the cut prism 1100 mm max. thickness of the cut prism 120 mm max. input material width 500 mm max. width of the finished board 140 mm min. width of the finished board 70 mm circular saw diameter 425 mm capacity 20 m3 right vertical spindle motor power 5.5 kW left vertical spindle motor power 5.5 kW engine speed (vertical saw drive) 2850 rpm horizontal saw engine power 18 kW engine speed (horizontal saw drive) 2850 rpm feed motor rotational speed 1450 rpm feed speed (smooth regulation) 0/20 m/min mains voltage (50 Hz) 3×400 V machine dimensions (length/width/height) 6900 / 1400 / 1380 mm machine weight 1300 kg

Weima WL 4 Hackers Weima Single-shaft Shredder NEW Funnel opening with logspacer 600x1050mm Funnel content 0.6m/3 Working width of the rotor 600mm Diameter of rotor 252mm Drive power 18.5 kW Rotor speed 80-120 rpm Knife number 28 pieces Type & size of knives concave / 40 x 40 mm Sieblochung 10 - 100 mm Painting WEIMA Standard RAL 2002 / 7016 Connection value 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg 2nd knife row

Wabäma WSG CLASSIC 460/11 Bread cutting machine / Bread gate 10mm Y.O.M. 1999 Condition: Used as available Manufacturer Wabäma GmbH Model: WSG Classic 460.11 230 V / 3.4 A /0.75 kW Weight: approx. 175 kg Dimensions: approx. 62 x 68 x 128 cm Visit possible at any time on site.

double piston compressor system semi-hermetically air-conditioning compressor Compressor Chiller 2 x 18.5 Kw with frequency inverters 2x Semi-hermetic piston compressor Manufacturer: Bock Type: HGX5/830-4 N°: AM18158A014 & AM37155A014 380/420 V; 50 Hz; 3 ph; 1450 rpm. Displacement: 72.20 m3; 19/25 bar Power with cooling conditions and refrigerant R407C: 39.32 kW Power with cooling conditions and refrigerant R404A: 41.27 kW Power with conditions and refrigerant R134a: 31.45 kW 4x Plate heat exchanger Manufacturer: GEA WTT Gmbh Type: WP7M-120 Y.O.M.: 2006 max. Pressure: 30 Bar Temperature: -195/+195 °C Content Page 1: 13.69 Ltr. Content Page 2: 13.92 Ltr. 2x Liquid collector Cat. 2 Manufacturer: FricoMEC Type: RV-300X606 Volume: 35 Ltr. Pressure max:28 bar Temperature: -10/+120 °C 2x Inverter Manufacturer: Fuji Electric Type: FRN18.5F1S-4E 3ph 380/48 ...

ID TR235 Labelling machine Wilux DLS 2100 / WLS-1206-LH-PA-90°, year of manufacture: 2012, Serial number: 25897 Max working width: 120 mm roll width 80 mm Electric connection: 230 V, 50 Hz, 500 W Own weight: 50 kg Total dimension L 1000 mm x W 800 mm x H 1900 mm Description Including mobile frame, documentation available Working speed 30m per minute Saves in the software the models of over 100 labels It has both configurations on the left LH and on the right Rh, at the customer's option Luminous LCD display (the display changes colour depending on normal mode, warnings, and faults). The control panel is 90 ° rotatable Label counting system Check the labels and any label slips on the roll The label glueing system can be set as fixed or as variable with Tacho The controls are fully integrated into the machine For the Romanian companies, there is the possibility of sell ...

used fermentation room for a Stikkenwagen including air conditioner for bakery, bakery branch and small bakeries. The proofing cabinet is easy to set up and disassemble if necessary as it is built with sandwich panels. High-voltage connection and water connection are available. The door is with exposed glass and large door handle. We have 6 pieces of these closets in stock. More details and pictures on request. for 1 Stikkenwagen 380 volts Stainless steel door Quail / Kunze Sandwich Panels External dimensions 90x140x240cm WxDxH Door entrance height 202 cm

x-axis stroke 490 mm axle stroke Y150 mm axle stroke Z 140 mm spindle cone EX 32 / 25 Spindle speed 500-12,000 rpm Total installed power 5 KVa WEIGHT 1800 kg CNC NUM 720

Wartsila W12V32 Generator available for Sale. ENGINE MAKE: WARTSILA TYPE: W12V32 SERIAL NUMBER: PAAE065 SPEC. NUMBER: 17390 KW: 5520 RPM: 750 YEAR: 2007 ALTERNATOR MAKE: ABB TYPE: AMG 0900LP08 KVA: 6659 RPM: 750 VOLT: 11000 HZ: 50 YEAR: 2006

Cylinder heads , liners, conrods, with little use, perfect for running.

cutting diameter: Ø 520/ 520 x 520 mm saw band length: 7250 x 50 mm cutting width: 1,6 mm cutting speed: 16- 90 m/min power requirement: 11 kW dimensions: m feed in one step: 520 mm multiple feeding length: 2080 mm feed speeds infinitely variable: 0- 400 mm/min weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 3000 mm turning diameter over slide rest: 2650 mm turning length: 19000 mm Control: Siemens type: 840 C mm faceplate: 2500 mm turning speeds: 0,65-99,2 U/min Rest: 2 steady: 2400 mm steady: 900 mm steady: 900 mm steady: 500 mm main drive motor: 180 kW workpiece weight: 100 t chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 570 mm turning length: 2000 mm control: Siemens Sinumeric steady: chip conveyor: turning dia. in gap: 600 mm turning diameter over slide: 340 mm spindle bore: 63 mm Tool changer: total power requirement: 22 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,5x1,5x1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

15m display 22.5 tons

Hello all We have just dismantled 1 Wartsila W8L32 main engine and we have the following spares available 8 pcs cylinder head covers reconditioned exhaust seats bores std. size 8 pcs Piston brand new condition 8 pcs Cyl. Liner brand new condition 8 pcs Water Jacket 8 pcs Connecting Rod 8 pcs Camshaft Pieces 1 piece Crankshaft standard 1 piece Engine Block 1 piece Coupling CENTAX 82 Engine driven pumps , Turning gear , Air cooler, Lube Oil cooler İf interested in anything please contact info@fin-marine.com best regards

We have 8 pieces of L32 cylinder heads in our stock in Istanbul Nearly brand new condition with very low working hours crack tested and water pressure tested free of cracks or welding We also have pistons , liners , con rods, fuel pumps and more ... please contact us at: info@fin-marine for more information

We have 8 pieces of W8L32 pistons in our stock in istanbul Slightly used in brand new condition with very low working hours All piston ring grooves standart size with measurement report available We also have covers , liners , conrods, fuel pumps and more ... please contact us at: info@fin-marine for more information

Pneumatic diaphragm pump manufactured by Wilden model P2

- X: 4050 mm - Y: 2050 mm - Z: 250 mm - Clamping area: 4200 x 2150 mm - Speed range: 12 kW - 36,000 rpm - Spindle holder: HSK E40 - Control: MDSI 6.0 on XP computer - Tool changer: 10-fold - Tool diameter max.: 13 mm - Switching hours: 23589 h - Spindle On: 7736 h - Total power: 15 kW - Machine weight: 4900 kg - Space requirement (W x D x H): 6.7 x 3.12 x 2.6 m Details Tool length scanning, spindle type: Reckerth type MSPF-125/36-12/FBLP/HSK-F40, frequency converter company Berges type SWPK 400150 H12, vacuum pump company Busch type RA 0255 D 502 Q0ZZ, industrial vacuum cleaner: company Depureco type T22/100, cooling pump: company Chilly 25-5 Accessories overhauled replacement spindle Reckerth with acceptance protocol, 10 holders with collets, 15 more collets, documentation

Wire strapping WAHLER Plant description Automatic WAHLER wire strapping machine (WDU-750-BDFB), construction year 1995, for the strapping of paving stones and high concrete products (bricks, curbs, etc.). Strapping height minimum: 30 mm above OK board Strapping frame size 3 (1,500 x 1,250 mm => board size 1,400 x 1,100 mm) Components: - Base frame to accommodate the lifting frame frame in welded Profile steel construction - Clamping and closure unit for galvanized flat steel wire 1.60 x 0.60 mm - Double lifting device for 2 strapping at different heights (adjustable) - Strapping frame in welded angle steel version with pneumatically operated wire guide rails made of highly wear-resistant steel - Stone compactor, acting on all sides - Wire unwinding device - Pneumatic equipment with valves, compressed air cylinders, etc. - Control cabinet with PLC cont ...

Wekal transportation system WPS type 7997 with: ? A load and unloading area. ? Highway. ? 5 satelites . ? Reject area. ? Max. Workpiece load: 5Kg. The WEKAL WPS transport system is a universally usable system with good customization options to optimize the material flow. It is designed for a workpiece load of max. 300 N. Each workpiece is supplied individually and in the correct position / orientation on a pallet for the desired operations. The mechanical basic elements are designed as a modular system. An SPS control system ensures reliable and optimal transport of the items. The complete system complies with the latest safety regulations, guidelines, standards and quality requirements. The WEKAL pallet conveyor is designed for permanent and low-wear operation. The pallets are transported on a plastic chain that runs in a U-profile. The conveyor consists of straight track profiles ...

Wekal transportation system WPS type 7997 with: ? A load and unloading area. ? Highway. ? 5 satelites . ? Reject area. ? Max. Workpiece load: 5Kg. The WEKAL WPS transport system is a universally usable system with good customization options to optimize the material flow. It is designed for a workpiece load of max. 300 N. Each workpiece is supplied individually and in the correct position / orientation on a pallet for the desired operations. The mechanical basic elements are designed as a modular system. An SPS control system ensures reliable and optimal transport of the items. The complete system complies with the latest safety regulations, guidelines, standards and quality requirements. The WEKAL pallet conveyor is designed for permanent and low-wear operation. The pallets are transported on a plastic chain that runs in a U-profile. The conveyor consists of straight track profiles ...