w 350 used for sale

Offer 25481 Technical data: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Largest opening width of the pneumatic vise 205 mm - Cutting range - at saw blade diameter 350 mm - at 90° around 120 mm - Square 110 mm - Flat up to 200 x 90 mm - or 140 x 110 mm - at 45° about 100 mm - flat 100 x 100 mm - Mitre adjustable - left up to 45° - right up to 45° - 30° - 2 saw blade speeds 17 + 34 1/min - Drive 400 V / 1.4 / 1.9 kW - Air connection 6 - 8 bar - Micro spray coolant device - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg

An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, opening stroke: 500mm, min. mold installation height: 250mm, mounting plate distance: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, weight: approx. 4300kg, operating hours: approx. 80131h. Documentation available. On-site inspection is possible.

General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmMax machining diameter320 mmSwing diameter over X linear guideways370 mmClamping chuck Ø210 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)13 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)6,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable dat ...

Two mechanical large-format double-column eccentric punching presses Rhodes (UK) are available. Press force: 350t, table dimensions X/Y: 1750mm/920mm, ram dimensions X/Y: 1550mm/615mm, ram stroke: 101mm, ram adjustment: 100mm, stroke rate: 50 strokes/min, max. installation height: 483mm, side opening X/Y: 630mm/380mm, table height: 933mm, weight: approx. 43000kg. Documentation available. On-site inspection is possible.

This 3-axis Mazak QT Nexus 350 II M was manufactured in 2008. It features a Mazatrol Matrix control unit, a maximum swing over bed of Ø 830 mm, and a turning length of 1500 mm. The spindle supports speeds up to 3300 rpm with a power of 30 kW. It includes a chip conveyor and tool presetter. If you are looking to get high-quality turning capabilities, consider the Mazak QT Nexus 350 II M machine we have for sale. Contact us for more information.

This SPINNER MT 350/750 was manufactured in 2001. A reliable horizontal turning machine, it offers solid performance for various machining tasks. Consider the opportunity to buy this SPINNER MT 350/750 horizontal turning machine. Contact us for more information.

This SPINNER MT 350/750 was manufactured in 2002. A robust horizontal turning machine featuring a travel distance of X 155 mm and Z 800 mm, a circulation diameter over bed of 350 mm, and a turning length of 750 mm. Powered by a 9/11 kW drive and controlled by SINUMERIK 810 D, consider the opportunity to buy this SPINNER MT 350/750 horizontal turning machine. Contact us for more information.

This 3-axis DMG CLX 350 V4 was manufactured in 2018 and features a max turning diameter of 320 mm, spindle speed up to 5,000 rpm, and a bar capacity of Ø 65 mm. It includes a VDI 30 turret with 12 stations for driven tools, enhancing versatility. Ideal for precision turning with rapid traverse rates and Siemens 840D sl control for advanced operations. Contact us for more information about this machine.

It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system.

This 4-axis HELLER MCH 350 was manufactured in 2006, featuring a Siemens 840D PL control system and a robust spindle capable of 7,000 rpm. It includes a HSK 100 tool clamping system and a large magazine with 234 slots. The machine offers a substantial working area of 1250 x 1000 x 1000 mm and a pallet size of 800 x 800 mm. For more information about this machining centre, please reach out to us.

Max. saw blade diameter: 350 mm Pneumatic material tensioners Table can be rotated left and right Manual feed

General SKU354T1032 MakeClima Temperatur Systeme TypeC+10/350/S LocationBarneveld CEcheck Pressure Working pressure25 Bar Main Features MaterialStainless steel Volume338 Ltr. Max.temp.90 °C Specified Features - Drying oven Climate boxcheck Temperature Test Chambers Max. temperature90 °C Capacity338 Ltr, (quantity: 0,9 kg) Internal width645 mm Internal depth710 mm Internal height740 mm Steam heatingcheck Electric capacity3,2 kW Number of doors:1 With air circulationcheck With fancheck With trayscheck MaterialStainless steel Information No.007020 Year of construction2000 Floorspace0,85x1,7 m Total height1,9 m Weight400 kg Extra SpecificationsTemp. range: 10-90 °C Humidity range: 10-95%rF Dew point req. 1: 5-89 °C Dew point req. 2: -19-5 °C Drying ovensCTS Clima Temperatur HechingenDryers > Drying ovensBrand > CTS Clima Temperatur Hechingen What you can ...

This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information.

This Milacron Elektron Evo 350 was manufactured in 2017. A robust electrical injection moulding machine featuring a screw diameter of 70 mm, closing force of 350 T, and a shot weight of 1172 g. It supports mold sizes between 249 – 800 mm and has minimal usage with only 235 testing hours. Contact us for more information about this machine.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information.

Clamping force: 1300kN, screw diameter: 40mm, max. injection pressure: 2120bar, shot volume: 182m³, shot weight: 153g, tie bar spacing: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, min. mold installation height: 275mm, max. opening stroke: 850mm, centering: 125mm. Machine dimensions X/Y/Z: approx. 4600mm/1600mm/2200mm, weight: approx. 5500kg. The clamping unit shows an oil leakage at the clamping cylinder. Documentation available. An on site inspection is possible.

Grinding length: 1500mm, center height: 175mm, max. workpiece diameter: 350mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm. Machine dimensions X/Y/Z: approx. 3600mm/1900mm/1900mm, weight: approx. 4000kg. Documentation available. An on-site inspection is possible.

Panel saw Type: HPP 350/43/43 Manufacturer: Holzma Year: 2005 Control: Holzma Cadmatic 4.0 Cut length: 4300 mm Number of collets: 6 Feed max. 130 m/min Overhang of the saw blade: 85 mm Saw blade diameter max. 350 mm Main engine: 12 kW Pre-cut Yes - Motor adjustment Optimization on the CutPlan 4 machine Stop side Right Machine in good condition, under power Find more here - / Contact us at -

GDW LZ 350 incl. 3-axis digital display -Tip height 175mm -Circumferential diameter over bed 310mm -Circumferential diameter over face slide 195mm -Tip width 800mm -Spindle passage 43mm -Speed range 45-2000 rpm -Automatic longitudinal/plane feeds -Tailstock / Quill Stroke 110mm -Thread/Metric/Inch etc. -Multifix with inserts -Three-jaw chuck 200mm -Collet device incl. 22 x collets -2x Emergency/Off -Coolant device -Various interchangeable wheels 5 pieces -Drill chuck -Running tip -Swarf back wall -Machine feet -Miscellaneous tools -Documentation Dimensions: LxWxH 1.85x0.9x1.5 meters / Weight 850Kg

This 3-axis CHARMILLES Roboform 350 die-sinking EDM machine was manufactured in 2006. It features travel paths of 350 x 250 x 300 mm and can accommodate a maximum electrode weight of 25 kg. The machine has a power consumption of 7.5 kVA and weighs 2350 kg. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES Roboform 350 machine we have for sale. Contact us for further details.

General SKU900WP038 MakeLAUDA TypeIT HW 350-Ex LocationBarneveld Main Features Heating (medium)Electric Capacity20 KW Temp.120 °C Specified Features - Temperature control unit Temperating machinecheck Information Extra Specifications20kW Lauda process heater , power consumtion 22,7 kW, 32,9 A, Ex IIGEExed [Ia] IICT3, heat transfer fluid water +5. . . +120°C, min flow rate 3 m³/h., pressure 10 bar, heat transfer fluid water, manufactured in 2003, Serial number B17 276, CE 0036 certified , EX II 2 G EEx edm [ia] IIC T3. : :For control cabinet see 900WP034Temperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please  ...

General SKU900WP034 MakeLAUDA TypeIT HW 350-Ex LocationBarneveld Main Features Heating (medium)Electric Capacity20 KW Temp.120 °C Specified Features - Temperature control unit Temperating machinecheck Information Extra Specifications20kW Lauda process heater , power consumtion 22,7 kW, 32,9 A, Ex IIGEExed [Ia] IICT3, heat transfer fluid water +5. . . +120°C, min flow rate 3 m³/h., manufactured in 2003, Serial number B17 275, CE 0036 certified. Control cabinet also for Lauda process heaters 900WP037 and 900WP038Temperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This Toyo Si-350-6S JH750E-PACK was manufactured in 2022. It features a clamping force of 3430 kN, screw diameter of 60 mm, and an injection speed of 300 mm/s. With a total installed power of 85.6 kW and dimensions of 8073 × 1930 × 2397 mm, it represents a robust choice for precision molding. Contact us for more information about this machine.

Key data: 3500 kN

Ferromatics Milacron K-TEC 350-2650 / Production line with the Sepro robot Year of Make: 2017 Injection unit: Screw diameter: 70 mm Injection weight: 1104 g Spray pressure: 2175 bar Dosing volume: 1213 ccm Clamping unit: Clamping force: 350 t Handlebar spacing: 750x750 mm Size of the clamping plates: 1110x1165 mm Ejector: hydraulic Clamping unit: hydraulic Control: MOSAIC - Touch Screen Additional equipment: Very good technical condition High-speed machine Operating hours: approx. 10,000 h in automatic mode Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Parallel movements Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Energy-efficient machine – has a system with 3 hydrauli ...

Key data: 3500 kN

Sumitomo Demag Systec 350/720-2300 / Production line with the Wittmann-Demag DR833 robot Year of Make: 2012 Injection unit: Screw diameter: 70 mm Injection weight: 1103 g Spray pressure: 1877 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 350 t Tiebar spacing: 720x720 mm Size of the clamping plates: 1040x1060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull controlled with proportional valve x 1 Control with hot runners x 5 Hardened injection unit - Bimetal Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable power Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Wittmann-Demag DR833 Year of Make: 2011 4-axi ...

Key data: 3500 kN

Sumitomo Demag Systec 350/720-2300 / Production line with the Wittmann-Demag DR853 robot Year of Make: 2015 Injection unit: Screw diameter: 70 mm Injection weight: 1103 g Spray pressure: 1877 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 350 t Tiebar spacing: 720x720 mm Size of the clamping plates: 1040x1060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Control with air valve Control with hot runners x 5 Hardened injection unit - Bimetal Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable power Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Wittmann-Demag DR853 Year of Make: 2016 6-axis robot: 5 axes are driven by servo motors (electric) ...

This 6-axis CLOOS QIROX QRC-350-E was manufactured in 2020. It features a maximum reach of 1550 mm and a payload capacity of 6 kN, making it suitable for various robotic welding applications. The system includes a welding positioner and a laser system for enhanced functionality. If you are looking to get high-quality robotic welding capabilities, consider the CLOOS QIROX QRC-350-E automation system we have for sale. Contact us for further details.

General SKULT0101 LocationBarneveld CEcheck MakePharmatec GmbH / HINKE Tankbau GmbH Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume350 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4404 Notified bodyHINKE Tankbau GmbH Capacity350 l. (460 l.) Vessel sizesø 791 x 696 mm Dished topcheck Dished bottomcheck OutletG1 Max. temperature—10 / 95 °C With propellor stirrercheck Magnetic ZETA, Type BMRT 125 PI Ex S Dk Y Motorcheck 0,18 kW 230/400V 2825 rpm (Ex) With variable speed drivecheck Speed mixing shaft75—540 rpm Information TypeFluent Tank Year of construction2021 Mounted on legsplatform With switchcheck With switchgearcheck Total height± 1,7 m ATEX compatiblecheck Extra SpecificationsThe tank is equipped with a pressure gauge, a temperature sensor, level  ...

General SKU079B444 MakeAviteq Vibrationstechnik TypeOA-1150/350-UVB No.6300095-001 Mounted on framecheck Specified Features - Vibro feeder Material finishPolished inside Main Features MaterialStainless steel Length1150 mm Width350 mm Vibro feeders MaterialStainless steel Vibro feeder(1x) Feeder width350mm Feeder length1150mm Feeder height275mm Closedcheck Inlet355x355mm With motor0,3 KW, 230/400 Volt (2x) Information LocationBarneveld Floorspace1,8x0,9 M Total height1,0 M Weight380 KGVibro feedersAviteqConveying systems > Vibro feedersBrand > Aviteq What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

2 x die-sinking EDM machines Maho Hansen HS 350 E and HS 300E built in 1990

A CNC die-sinking EDM machine Charmilles without counter is available. Travel path X/Y/Z: 350mm/250mm/300mm, C-axis: 360°, tool positions: 4, quill stroke: 300mm, table dimensions X/Y: 500mm/400mm, max. workpiece weight: 500kg, max. workpiece dimensions X/Y/Z: 780mm/550mm/370mm, surface quality: approx. Ra 0.1µm, max. electrode weight: 50kg, tank usable volume: 160l, total tank volume: 410l. Machine dimensions X/Y/Z: approx. 1900mm/1700mm/2550mm, weight: approx. 250kg. Documentation available. An on-site inspection is possible.

Key data: 800 kN

Arburg 420S 800-350 Year of Make: 2003 Injection unit: Screw diameter: 50 mm Injection weight: 250 g Spray pressure: approx. 1300 bar Dosing volume: 288 cc Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 1 Core train control Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Integrated original Arburg sprue picker on the side Dimensions: Weight: 3800 kg Length/Width/Height: 4.06x1.39x2.12 m Drive: Pumps/motor: 18.5 kW Heating capacity: 10.2 kW Total power: 28.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or ...

Key data: 1300 kN

Arburg 470S 1300-350 Year of Make: 2001 Injection unit: Screw diameter: 35 mm Injection weight: 117 g Spray pressure: 2500 bar Dosing volume: 139 ccm Clamping unit: Clamping force: 130 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in system for printing quality control from the Kistler brand sensor - measurement of tool pressure Type of injection unit: Vario - This offers the possibility of using the injection unit, e.g. for side spraying The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/Width/Height: 4.45x1.49x2.17 m Drive: Pumps ...

Arburg 470S 1300-350 Year of Make: 2001 Injection unit: Screw diameter: 35 mm Injection weight: 117 g Spray pressure: 2500 bar Dosing volume: 139 ccm Clamping unit : Clamping force: 130 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in system for printing quality control from the Kistler brand sensor - measurement of tool pressure Type of injection unit: Vario - This offers the possibility of using the injection unit, e.g. for side spraying The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/Width/Height: 4.45x1.49x2.17 m Drive: Pu ...

Arburg 570C 2000-350/150 / Production line with the Arburg Multilift side robot / 2K machine Year of Make: 2003 Injection unit: Screw diameter: 40 mm Injection weight: 153 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Production line with the Arburg Multilift side robot 2K Machine Air Valve x 1 Hydraulic core pull x 5 Control with hot runners Reinforced Injection Units – Bimetal Proportional valves on sprinkler units - precise spraying The vertical injection unit - screw diameter: ⌀25 mm - 49 g/hp All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine o ...

SICAR sliding table machine model SEGA 350, year 2025, CE standards: - 3200mm aluminum carriage - Useful cutting width on parallel guide 1250mm - blade D=350mm, motor KW 5.5 / HP 7.5 - scorer D=120mm, motor KW 0.75 / HP 1 - manual tilting of the blade unit - digital display of the blade group inclination - upper protection with built-in extractor hood Optional Installed: - motorized lifting of the blade unit - Digital reader on the parallel guide - n° 3 digital readers on the bars of the square guide

Condition: tested, fully functional Availability: immediately Width approx.: 350 mm Length approx.: 1570 mm

Panel saw Type: Concept 350 Manufacturer: Fimal Year: 2019 Main blade 350 mm Pre-cutting unit Massive formatting table Precise parallel ruler Strong and stable operation 400 V / 3 phases 20 pcs of discs included Machine in good condition, under power Find more here - / Contact us at -

An oil-lubricated screw compressor Boge including an air dryer unit is available. Tank volume: 350l, motor power: 11kW, max. operating pressure: 8bar, air flow rate: 1810l/min, machine dimensions X/Y/Z: approx. 2000mm/750mm/1400mm, weight: approx. 400kg. An on-site inspection is possible.

A Neva lamella saw with a saw frame movement methodology is available. Frame stroke: 210mm, stroke rate: 450/min, max. cutting height: 350mm, max. working width: 155mm, max. lamella length: 155mm, min. lamella thickness: 1.5mm, rollers bottom/top: 11/4, production capacity per 8h: approx. 550m²-800m², max. feed speed: 2m/min. Machine dimensions X/Y/Z: approx. 2600mm/800mm/2000mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BLOWN FILM LAB EXTRUDER, suitable for testing granulate, 25 mm screw Ø 25 L/D, 60 mm diam. die, 500 mm. pull off, 350 mm collection frame, 7,5 kW drive, complete with tower, nips and rolls, control panel, production rate 10 kg/h, installed power - used power in work: about 60-65% : 7,5 kW, working width: 350 mm, conditions: checked

OMS SALVARANI double miter saw model OK 350 SUPER: - useful opening 3200mm - adjustable blades D=350mm - Total power kw 8.3 , volt 380 - year 1995, machine to CE standards

Stroke ( X/mm) 2500 Stroke ( Y/mm) 3500 Stroke ( Z/mm) 1300 Type of controll heidenhain Motor Power (kw) 103,6 Number of axes 5 Work hours 8500

suitable for tomatoes and other soft fruit and vegetable varieties, sawtooth-shaped cutting blades that move back and forth at high speeds, low cutting pressure, max. product dimensions: 100 x 70 mm, existing cutting set: 4.76 mm cutting thickness, WILLICH STORAGE.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,27 t dimensions: 1,1 x 0,95 x 1,7 m - Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hood The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: KraussMaffei Model: KM 350-2700 C2 Year of Manufacture: 1998 Type of Machine : Injection Moulding Machine Machine Weight: 16,000 kg CE Certified: Yes Find more here - / Contact us at -

CONTROLS   CNC controls MOULD CLAMPING UNIT   locking force: 350 to   die opening stroke max.: 350 mm EJECTOR (TABLE EJECTOR)   stroke: 150 mm INJECTION UNIT   stroke of screw: 80 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3700 mm   space requirements -front/back-: 1300 mm   total height: 2100 mm   total weight approx.: 2300 kg Features: - Includes pellet dryer: Labotek DDM 60 ALB3 units available