w 350 used for sale

Workspace Center width 1000 mm Turning diameter over bed 356 mm Circulating Ø over support 220 mm Bed width 206 mm Travel X-axis travel 178 mm Travel Z1 axis 92 mm Bsncqtycvju Swivel range upper slide ± 50° Main spindle Speed range, High 550 1/min - 3000 1/min Speed range, Low 30 1/min - 550 1/min Spindle mount Camlock D1-4 Spindle bore 38 mm Spindle Taper 5 MK Feed Feed X-axis 0.014 mm/rev - 0.206 mm/rev Feed Z-axis 0.043 mm/rev - 0.653 mm/rev Tapping Tapping, Metric (37) 0.4-7 mm Tapping Whitworth (28) 4-56 TPI Tailstock Tailstock quill diameter 45 mm Tailstock cone 3 MK Tailstock quill stroke 120 mm Tailstock transverse adjustment ± 10 mm Drive power Motor power main drive 4 kW Dimensions and weights Dimensions (length x width x height) 1.95 m x 0.75 m x 1.55 m Weight 880 kg

Workspace Workpiece, weight (max.) 270 kg Distance spindle nose - table surface 580 mm Table dimensions 635 mm x 305 mm Dimensions magnetic clamping plate 600 mm x 300 mm Scale ring pitch Y-axis 0.005 mm Scale ring pitch Z-axis 0.02 mm Auto. Transverse Feed Z-Axis 0.1 mm - 8 mm Speed 1450 1/min Auto. Vertical feed 0.005 mm - 0.05 mm Travel X-axis travel 765 mm Y-axis travel 340 mm Feed hydr. Feed X-axis 7 m/min - 23 m/min Rapid traverse Y-axis 480 mm/min Rapid traverse Z-axis 990 mm/min Drive power Motor power main drive 4 kW Dimensions and weights Grinding wheel dimensions 350 mm x 40 mm x 127 mm Dimensions (length x width x height): 2.9 m x 2.2 m x 1.9 m Weight 2800 kg

Turning diameter 410mm Turning length of 1000mm CE certification proves the best possible safety Complete series in above-ground construction Speed up to 3000rpm Center width 1000mm Turning Ø over bed 410mm Turning Ø over support 255mm Hbcfxifg Turn Ø in Bridge ----- Speed/Steps 50-3000 rpm / Stepless Tailstock mount MK 4 Feed longitudinal 0.025-085mm/rev Feed transverse 0.05-1.7mm/rev Motor 5.5KW

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 64 A -Connection: 220 volts -Weight: 50 kg

Workspace Workpiece, weight (max.) 500 kg Table dimensions 813 mm x 406 mm Distance spindle nose - table surface 580 mm Dimensions magnetic clamping plate 800 mm x 400 mm Scale ring pitch Y-axis 0.005 mm Scale ring pitch Z-axis 0.02 mm Auto. Transverse Feed Z-Axis 0.1 mm - 8 mm Speed 1450 1/min Auto. Vertical feed 0.005 mm - 0.05 mm Travel Travel X-axis 910 mm Y-axis travel 450 mm Feed hydr. Feed X-axis 7 m/min - 23 m/min Rapid traverse Y-axis 480 mm/min Rapid traverse Z-axis 990 mm/min Drive power Motor power main drive 4 kW Dimensions and weights Grinding wheel dimensions 350 mm x 40 mm x 127 mm Dimensions (length x width x height): 3.6 m x 2.4 m x 1.9 m Weight 3400 kg

Used 4-basket autoclave WSA-8 by Spomasz. Year of manufacture 2012. Diameter 1100 mm, acid-resistant design. Diameter 1100 mm. Working pressure 0.4 MPa Calculation temperature 151°C Sterilization temperature max. 132°C Water consumption approx. 400 dm3/8h Steam consumption during the entire cycle approx. 400 kg/h Installed power 5.5 kW Length 480 mm, width 2400 mm, height 2200 mm, weight 2020 kg.

Dividing head, spiral milling attachment, dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder -Subhead -Point width: 450 mm -Recording: SK40 - Suitable for: Milling cutter sharpening -Translation: 1:40 -swivel -Weight: 60 kg

TO WHOM IT MAY CONCERN ; WE VE NEW UNUSED OIL PUMP OF WICHMANN 28 AT STOCK TYPE. QT81 -315 TRUNINGER AG MADE IN SWITZERLAND IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

- Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Vibrating bottles: 2 -Cable length: 6m each -Weight: 100 kg

Three-phase motor, electric motor -Power: 1.5 kW -Speed: 3000 rpm -Brake -Shaft: Ø 24 mm -Design: B5 -Protection class: IP 44 -Number: 3x motors available Price: per piece -Weight: 25 kg/piece

Power trowel, concrete trowel, screed trowel -without a flat iron -Weight: 60 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 210 x 570 mm -T slots: 3 - rotatable and swiveling -Fits Deckel Mikron WMW and other milling machines -Weight: 95 kg

Inv. Num. : 8091 Type: VP Producer: SECO/WARWICK Created: 2024 Parameters: Control system: Siemens S7-1500FS series Maximum temperature: 1300 C Internal dimensions of the machine (LxWxH): 1500 x 1700 x 1700 mm Capacity: 3000 kg Working vacuum: 5x10-2 mbar

Machine vice, sturdy vice, drill press vice -Jaw width: 170 mm -Clamping depth: max. 120 mm -Dimensions: 480/170/H130 mm -Weight: 30 kg

Specifications Table diameter 3,400 mm Total height approx. 1,230 mm Centering bore Ø 250H7X 25 mm Permissible transport load 20,000 kg Holding torque of the table clamping 2,400 daNm Table speed 0.002 – 2 min Net weight approx. 22,000 kg Operating voltage 380 V, 50 Hz. 3 phases Control voltage 24V Positioning accuracy (without control errors) ± 1" Plan accuracy 0.02 mm Axial running accuracy 0.01 mm Concentricity deviation of the centering bore 0.01 mm Resolution of the displacement measuring systems 0.0001°

Machine lamp, machine lamp, work area lamp -Lights: are not used -Dimensions: 545/185/H150 mm -Connection: 24 V DC 1x36W -Number: 14x lights available -Price: per piece -Weight: 8 kg/piece

Deck Oven W&P Matador MD101C Year: 2019 Little-used deck oven Werner & Pfleiderer Model Matador MD 101C from 2019 is for sale in stock. - Deck oven with gas burner - Manufacturer: Werner & Pfleiderer Lebensmitteltechnik - Type: Matador MD101C52 - Fuel type : Oil gas / current is with gas burner - 79 kW - 5 shelves each 120cm wide and 160cm deep - 1 pull-out stove - With exhaust hood - Combitherm - 3N 400 V 50Hz 12A - Year of construction: 2019

Universal milling angle head, milling angle head -Recording: SK 50 -Flange mounting outer diameter: 380 mm -Bolt circle diameter: 320 mm -Drive mounting diameter: 60 mm -swivel -Quick stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg

Keyboard, logistics module Manufacturer: Witron -TYPE: 12V DC RS 232 -MFT: 11 - VT -Weight: 3 kg

1x CNC Table Boring Machine Manufacturer: TOS Type: WHQ Year of Make:1997 Control: Heidenhain TNC 426 in 5-axis X-axis 2000mm Y-axis 1400mm Z-axis 1250mm W-axis. 710 mm B-axis 360 degrees Spindle diameter : 112mm Spindle mount: ISO 50 Spindle speed max: 2000 rpm Table clamping surface: 1400x 1600mm Tool changer: 60 places Chip Conveyor: Yes

Weber ASC 560 in absolute top condition

Control amplifier, servo motor control -DTT 10/330 V -9.2 V/1300 -Weight: 6 kg

Precision machining center, Siemens Sinumerik 840 D Solution Line control, travels: X-axis 600 mm, Y-axis 630 mm, Z-axis 510 mm, 2 working spines 1-17,500 rpm, torque motor drive system, equipment including: oil distributor for rotary table, pneumatic pressure amplifier, magazine extension 144 tool positions (2 x 72), clamping hydraulics basic module, high-pressure pump 70 bar, emulsion mist separation system, automatic loading door, air query control, inductive tool breakage detection, scraper belt conveyor KNOLL 800 K-1/400, coolant cleaning compact belt filter KNOLL FKA 1200 and much more.

Horizontal drilling rig, manufacturer: DITCH WITCH, type: AT 40 All Terrain, year of construction: 2018, read operating hours (h): 2,898, serial no.: DWPAT40XHK0000065, with rod box, drill pipe, without drill heads, diagnostic screen with approx. 12 error messages (including AdBlue malfunctions), engine no.: 707 3399, 4-cylinder diesel engine, 119 kW, thrust JT/AT 178 kN, extendable cab with heating and air conditioning, flushing high-pressure pump, electric shock protection system, hydr. Crusher, remote control with remote shutdown function, Commander 7 controller with locating system

Used pet food production and packaging line made by Waldner. New 1995.

Offer 24178 Specifications: - Center height 250 mm - Center width 2000 mm - larger circulation – Ø over bed 490 mm - via flat sleds approx. 300 mm - Spindle bore 72 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm -Feeds - Travel of the cross slide 200 mm - Travel of the upper slide 115 mm - Drive 380 V / 5.5 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg

3 Pieces Mitutoyo Micrometers with Digital Display Mechanical as good as new unused / measuring surfaces are still sealed from old stock without transport box very good condition

Reference Num.: 4036 Brand: Konica Minolta Type: Bizhub Pro 951 (black / white) Construction year: 2013 Impressions: 6 mio Available: directly Status: In production Location: Deutschland Equipment: - Scanner - Duplexdruck - Locheinheit - Broschürenfinisher - Falzeinheit

1. Qty. 1 Second-hand slitting line Mfc.: DANIELI WEAN UNITED, LOOPCO, Built: 1994 Relocated: 2021 Raw Material CR, GI, COLOR COATING COIL Strip Width: 400 - 1,210 mm Thickness: 0.5 - 1.8 mm Slitter Stand (OD420 x ID255 10/15T=Each 30EA) Scope of supply: Uncoiler Coil Car with Coil Skid Uncoiler with Snubber Roll Coil Opener & No. 1 Pinch Roll Crop Shear Threading Table No. 2 Pinch Roll & Side Guide Slitter Stand Scrap Winder Loop Table Tension Pad with Separator Bridle Roll with Guide Table Recoiler with Separator Recoiler Coil Car with Coil Skid Hydraulic Equipment Electric Equipment 2. Qty. 1 Second-hand cut-to-length line Mfc.: DONGBU ENG Built: 1997 Relocated: 2021 Raw Material CR, GI, COLOR COATING COILS Strip width: 600 – 1540 mm Thickness: 0.5 - 2.0 mm Coil Weight Max. 15,000 Kg Sheet Length: 500 - 2,800 mm Scope of supply: Coil Car Unco ...

Weinig Unimat 1000 Star four-sided planer Working width 20-230mm Working height 8-160mm Number of spindles 6 Spindle system: Bottom 5.5kw 6000r.p.m Right 4kw 7000r.p.m Left 5.5kw 7000r.p.m Mountain 7.5kw 7000r.p.m Bottom 7.5kw 7000r.p.m Universal 7.5kw 7000r.p.m Automatic height and width setting Automatic Countertop Lubrication Pump Countertop driven rollers (1 corrugated roller for wet wood) Pusuw speed adjustable by variator 5-24m/min Weinig EM10 automatic material feeder

Plastic dryer - Wittmann Drymax E30-70-M / Very good technical condition Year of Make: 2015 Description: Dryer with 2 molecular sieves, 1-silo Silo capacities: 150 kg Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Hermetically insulated silo Dryer with Wittmann suction conveyor All offered peripherals are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

x-travel: 15500 mm y-travel: 6800 mm z-travel: 3400 mm Control: Siemens Sinumerik 840 D w-axis: 2000 mm table surface area: 15000 x 5000 mm passage width: 5900 mm Passage height: 5030 mm main drive motor: 150 kW spindle taper ISO: 60 milling head speed: 6-750 (2250) U/min workpiece weight: . t total power requirement: - kW weight of the machine ca.: ca 270 t dimensions of the machine ca.: - m modernized in 2008 and equipped with: - CNC control Siemens Sinumerik 840 Dsl - movable Portal - Coolant -- Coolant through spindle -- external Cooling - set of milling heads 9ea -- high speed spindle head SLA 23 / 3 SZ (2250 U/min) -- horizontal head WFU 2100 SZ / 500 S 22 -- WFU 500 SZ / 500 S 22 -- WFU 250 B / 500 S 22 -- EFK 40 E / 600 C 22 -- EFK 250 SZ / 850 S 22 -- horizontal head HSD 250 C / 1450 S 22 -- HS 800 C / 600 S 22 -- vertical head VL 300 SZ / 65 ...

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.5 kW -Speed: 3200/5200 rpm -Grinding discs: max. Ø 180 mm -Operating voltage: 380 volts -Dimensions: 500/500/H1550 mm -Weight: 170 kg

Tool cabinet -with: spare parts for toolmaking, fixture construction -Various drill bushings: different sizes -various clamping elements -Dimensions: 670/300/H2000 mm -Weight: 200 kg

Centrifugal quick-release chuck, centrifugal chuck, three-jaw chuck -Outer diameter: 155 mm -Clamping range: Ø 12-30 mm -Cone mounting: Ø 82 mm -Bolt circle: Ø 105 mm -Quantity: 2x food available Price: per piece -Weight: 6 kg/piece

Centrifugal quick-release chuck, centrifugal three-jaw chuck -Outer diameter: 155 mm -Clamping range: Ø 25-45 mm -Cone mount: Ø 62 mm -Bolt circle: Ø 82 mm -Quantity: 2x food available Price: per piece -Weight: 6 kg/piece

ZIM Hülsta Cabinet Press NOW Easy Make: ZIM Hülsta-Werke Type: NOW Easy Ser.-No.: 380125028 Body max. 260 x 1100 mm 2 supports at the bottom, sliding 2 press beams at the top, movable Beckoff Control Panel Roller track 4500 x 600 mm Roll width: 500 mm Overall dimensions: W x D x H 3300 x 1800 x 3600 mm More items - new and used - can be found in our shop! International shipping costs on request!

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Baking: soft -Mouth size: Ø 200 mm -Weight: 22 kg

Precision three-jaw chuck, chuck, faceplate, 3-jaw chuck -DHK: 200x3 -TGL: 30-2333 -Mouth size: Ø 200 mm -Bakes: individually and fully adjustable -Interchangeable jaws -Through hole: 55 mm -Recess: Ø 160 mm -Quantity: 1x food available Price: per piece -Weight: 16 kg

Dividing head, dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder -with translation -Shaft mounting: Ø 20 mm -Dimensions: 470/230/H240 mm -Weight: 30 kg

ZIM Hülsta Rear Wall Saw Make: ZIM Hülsta-Werke Description: Backwall saw Year of Make: 2014 Serial Number: 380114008 Description: 2 movable Benz saw/drill units Feed roller table Protective enclosure with Leutze laser barrier system Switchboard Extraction piping Control terminal, consisting of: PC, flat screen EIZO FlexScan S1911 Keyboard and mouse, handheld scanner, terminal cabinet Mobile steel skip (beige) More items - new and used - can be found in our shop! International shipping costs on request!

Circulating pump measuring case -Handover in its current condition as inspected -various flanges and connections -Circulation pump measuring Wilo -Suitcase -Weight: 19 kg

Forced mixer, agitator, stirring device, mixing tool, stirrer -Nominal input: 1400 watts -Connection: 230 volts -Speed: 150-470 rpm -Dimensions: 920/450/H220 mm -Weight: 8 kg

Forced mixer, agitator, stirring device, mixing tool, stirrer -Nominal input: 1050 watts -Connection: 230 volts -Speed: 230 rpm -Dimensions: 1000/520/H130 mm -Weight: 10 kg

- Converter for bottle vibrators, vibrating bottles, internal vibrators -Engine: Hatz diesel -Frequency converter: -Vibration bottles: 2 pieces 1x vibrating bottle Ø 60 x 450 mm 1x vibrating bottle Ø 50 x 450 mm -Cable length: 6 m each -Dimensions: 1550/800/H1150 mm -Weight: 220 kg

Tenoning spindle: 1 St. Number of milling agregates: 5 St. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles -------------------------------------------- Machine is currently being checked! Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ------------------------------------------- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment path pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser aiming light for detecting the saw section Item 2: Rounding unit horizontal below ------------------------------------------- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9,000 rpm > Max. tool flight circle: 13 ...

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutter -inch thread: 1/2-3/4 inch -Weight: 6 kg

PTO shaft, drive shaft -Discount: You get a 20% discount on this item -Manufacturers: Walterscheid, Jon Deere, Granit -Spare parts: PTO shaft mounts, cross fitting, protective tubes -Partly new, partly used -Sale: only complete set -Price: complete -Weight including packaging: 425 kg

Forced mixer, agitator, stirring device, mixing tool, stirrer -Nominal input: 1400 watts -Connection: 230 volts -Speed: 150-470 rpm -Dimensions: 920/450/H220 mm -Weight: 7 kg

Fettbaker Kippfix Roka Werk TW 36-E -with 10 tilting planks Pool dimensions: 50x88cm and 8.5cm high Dimensions: 218cm length 92cm height