w 350 used for sale

cutting diameter: 350 mm saw band length: 4160 x 34 x 1,1 mm cutting width: 350 mm cutting capacity - flat: 400 x350 / 90° mm cutting capacity - flat: 400 x 350 / 30° mm cutting capacity - flat: 290 x 300 / 45° mm cutting capacity - round: 350 / 90° mm cutting capacity - round: 320 / 30° mm cutting capacity - round: 320 / 45° mm feeds - fine adjustment: 20-100 mm hydraulic motor: 0,37 kW coolant pump AC: 0,12 kW drive motor: 2,2 kW total power requirement: 2,7 kW weight of the machine ca.: 1,05 t dimensions of the machine ca.: 2100 x 1300 x 850 m Accessories : automatic sawing functions, hydraulic clamping, material feed via driven rollers, pneum. adjustable lowering speed, sawing programs adjustable via touch screen, EU quality and CE standards, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.87 m, Overall length= 0.8 m, Overall width= 2.95 m, Net weight= 525 kg,

Height=1.32 m, Overall length= 0.75 m, Overall width= 1.7 m, Net weight= 155 kg,

Height=1.1 m, Overall length= 0.9 m, Overall width= 1.2 m, Net weight= 134 kg,

Height=1.21 m, Overall length= 0.78 m, Overall width= 1 m, Net weight= 150 kg,

feed pressure: 10,0 bar intake capacity: 345 L/min Effective free air delivery: 228 L/min Receiver capacity: 50,0 Ltr. motor: 230 V power capacity: 2,2 kW weight of the machine ca.: 51,0 kg. dimensions of the machine ca.: 800 x 390 x 750 mm Description : - mobile craftsman piston compressor - High-quality processed 1-stage compressor block - with 2 cylinders and optimal efficiency - Finely ribbed cylinder and cylinder head for optimal temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - all fittings are sealed with easily removable special adhesive and can easily be exchanged if necessary - the start-up relief takes place  ...

cutting diameter: 270 mm saw band length: 2925 x 27 x 0.9 mm capacity 90 degrees: flat: 350 x 240 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: flat: 230 x 150 mm capacity 60 degrees: round: 140 mm capacity 60 degrees: flat: 140 x 140 mm table height: 740 mm cutting speed: 36 + 72 m/min clamping range: max. 355 mm total power requirement: 2.0 kW weight: 1180 kg range L-W-H: 2150 x 2400 x 1900 mm Equipment: - Metal band saw - Fully automatic with one-sided miter adjustment - Multifunction digital control panel - Programmable work cycle - Help and self-diagnosis in the event of malfunctions - Coolant system - Saw blade guide with hard metal plates - Hydraulic saw frame lowering - Automatic raising and lowering - Band tension with pressure gauge - Hydraulic vice clamping - Operating instructions (ENG) The data for this ad was created with ModulMWS - the software solution of L ...

saw blade diameter: 350 mm cutting diameter: 110 mm capacity 90 degrees: flat: 180 x 85 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: flat: 130 x 85 mm capacity 60 degrees: round: 105 mm capacity 60 degrees: flat: 90 x 85 mm turning speeds: 9-18-36-74 U/min vice: max. 180 mm Control: IMET CNC total power requirement: 1.5 / 2.2 kW weight: 710 kg range L-W-H: 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. ...

dimensions of saw-blade: 350 x Ø 40 x 3 mm cutting range: 120 mm capacity 90 degrees: square: 100 x 100 mm capacity 90 degrees: flat: 170 x 100 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 95 x 95 mm capacity 45 degrees: flat: 120 x 100 mm capacity 60 degrees: round: RE 100 mm capacity 60 degrees: square: RE 85 x 85 mm capacity 60 degrees: flat: RE 85 x 100 mm work height max.: 900 mm saw blade turning speeds: 17 / 34 U/min compressed air: 6.0 - 8.0 bar total power requirement: 1.4 / 1.9 kW weight: 340 kg range L-W-H: 1010 x 765 x 2175 mm Furnishing : - semi-automatic vertical cold circular saw - pneumatic quick clamping device - Infinitely adjustable saw blade feed - Comfortable miter adjustment - Convenient stroke adjustment of the saw unit via clamping levers - Generously sized gearboxes - with Eisele rotation compensation for a long saw blade service life - Con ...

Injection moulding machine Arburg 420S 1300-350 BJ 2000 without handling

saw blade diameter: 350 mm dimensions of saw-blade: 350 x 30 x 50 mm machine weight ab.: 100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 kN, 127 g/PS, 35 mm

Regularly serviced machine that is always kept in top shape. The screw rotation is carried out with an electric servo motor, which is an energy-efficient solution. The rest of the machine is identical to the standard version of the 420 S. The presence of the core puller in this type is extra. Another special feature is that the injection molding unit can be moved from the center. Software and technologies can be read from a CF disk. The notification can be made in both Hungarian and German. Manuals can also be in German or Hungarian. Currently, the machine has a 35 mm auger for technical materials in good condition. A video of the operation of the machine was also created, which can also be tried out in person at our site. Please see our other ads. Information about the machines we offer and our company: - We only sell machines that are owned by us and can be purchased in our warehouse ...

formatkreissägen mit schwenkbarem sägeblatt SICAR 350 Neue Maschine Bereit zur Auslieferung SUPER RABATTPREISE mit Vorritzaggregat : Ja digitaler Neigungswinkelmesser 0° / 45° Brückenblattschutz CE-Vorschriften: JA mit Bedienungsanleitung und CE-Erklärung Volt. 380/50 Auf-/Ab- und 45°-Neigung der Sägeblätter manuell digitaler Neigungswinkelmesser 0° / 45° Brückenblattschutz schlitten mm. 3200 unabhängige Motoren hauptmotorleistung PS 7.5 motorleistung Vorritzaggregat PS 1 max. Sägeblattdurchmesser mm. 350 durchmesser Vorritzaggregat mm.120 Max. Schnitthöhe bei 45° mm. 92 Max. Schnitthöhe bei 90° mm. 120 Max. Schnittbreite an Parallelführung mm.1250 volt. 380/50

Brown & Sharp Tesa Hite 350 Digital Height Gauge 007.30041

WASHING LINE for PLASTIC SCRAPS, for 350-550 kg/h average capacity depending on contamination and material, material loading screw conveyor with hopper, equipped with vibrating motor, made of stainless steel, stainless steel tank size 5,0 x 1,5 x 2,0 mt. complete with 2 horizontal skimming screw conveyors for material handling. 8.2 kW, 50 Hz., horizontal screw conveyor at the bottom + diagonal screw conveyor for extracting sunk material, stainless steel safeti grate on the upper part, diagonal material collection drainage screw conveyor, drying centrifuge, material extraction fan, electrical panel, the line was built in 2008 and is offered completely reconditioned

Arburg 470 C 1500-350 (2006) Working hours : only 7.113 h Clamping Force: 150 tons   Tie-bar Spacing: (H × V): 470 mm × 470 mm   Maximum Plate Size : 650 mm × 650 mm   Minimum Mould Installation Height: 250 mm   Maximum Distance between Platen (when fully open): ~750 mm   Mould Opening Stroke : 500 mm   Screw Diameter: 45 mm Approximate Shot Volume (Injection Volume): 230 cm³   Approximate Shot Weight (for PS): 210 g   Injection Pressure: 1 670 bar   Motor/Drive Power: Example listing ~ 37 kW servo/hydraulic drive power   Heating Power: Example listing ~ 10.2 kW   Machine Dimensions (Length × Width × Height):  5.4 m × 2.0 m × 2.2 m   Machine Weight:4 500 kg  

Punching force: 350 kN (holes e.g. 23 m in 12 mm material) Cuts 150 x 10 mm on the flat steel shear Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side with stop cam Range of tools is included in the price

Travel X/Y/Z: 2000mm/610mm/630mm, tool holder: SK40, spindle speed: 9000rpm, tool stations: 40, rapid traverse: 60m/min, table dimensions X/Y: 2100mm/720mm, max. table load: 1000kg. Control: Siemens Sinumerik 840D, operating hours: 18272h. Including conveyor and coolant system. Documentation available. An on-site inspection is possible.

Cone splitter JSK-350-MS01, splitting cone, drill cone, log splitter, 1x hydraulic earth boring device HBG-1500 (for mini excavator, tractor, front loader), 1x adapter, quick coupler MS-01 (for HBG-1500 and HBG-2000), 1x Jansen splitting cone, 1x jansen fixation adapter splitting cone

Clamping Force: 350 ton // Shot Weight (Max): 694 g

Offer 25348 Specifications: - Plate length approx. 5500 mm - Plate width approx. 2000 mm - Plate height approx. 350 mm - Thickness of the top plate approx. 80 mm - 8 T-slots in table surface length 5500 mm - Center distance of the T-slots in the table surface 255 mm each - Center distance of the T-slots from outer edge 110 mm - T - groove width approx. 40 / 60 mm - T - groove depth approx. 62 mm - Required space L 5600 x D 2020 x H 350 mm - Weight approx. 10200 kg

Max. saw blade diameter: 350 mm Manual material tensioner

saw blade diameter: 350 mm dimensions of saw-blade: 350 x 32 x 2,5 mm cutting diameter: 115 mm stroke: 100 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: round: rechts & links 110 mm capacity 45 degrees: square: rechts & links 95 mm capacity 45 degrees: flat: rechts & links 125 x 95 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 90 x 95 mm cutting speed: 15 / 30 / 45 / 90 m/min total power requirement: 2,6 kW weight of the machine ca.: 375 kg dimensions of the machine ca.: 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Machine base - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU218W173 LocationBarneveld MakeLauda TypeITH 350 EX Mach.No.LSI 51392 Pressure Working pressure10 Bar Main Features Heating (medium)Oil Capacity36 KW Temp.380 °C Specified Features - Temperature control unit MaterialMild steel Thermal oil heatercheck Electric heatingcheck Heating medium:Therminol 72 Heating capacity36 kW Electric capacity42,5 kW Temperature+20°C/+380°C Tank capacity60 Ltr. With pumpcheck Capacity8m³/h Motor5,5kW 400Volt With temperature controllercheck Information Year of construction2008 Total height2,0 m CEcheck Floorspace1,85x0,98 m Weight1240 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...

General SKU354T960 LocationBarneveld MakeClima Temperatur Systeme TypeC+10/350/S No.007147 Year of construction2001 Pressure Working pressure25 Bar Main Features MaterialStainless steel Volume338 Ltr. Max.temp.90 °C Specified Features - Drying oven Climate boxcheck Temperature Test Chambers Max. temperature90 °C Capacity338 Ltr, (quantity: 0,9 kg) Internal width645 mm Internal depth710 mm Internal height740 mm Steam heatingcheck Electric capacity3,2 kW Number of doors:1 With air circulationcheck With fancheck With trayscheck MaterialStainless steel Information Total height1,9 m Weight400 kg CEcheck Floorspace0,85x1,7 m Extra SpecificationsTemp. bereik: 10-90 °C Vochtigheidsbereik: 10-95%rF Dauwpunt vereist 1: 5-89 °C Dauwpunt vereist 2: -19-5 °C Drying ovensCTS Clima Temperatur HechingenDryers > Drying ovensBrand > CTS Clima Temperatur Hechingen What ...

General SKU345S703 LocationBarneveld MakeKresta No.94071-10 Year of construction1994 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume350 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel Notified bodyTÜV Capacity350 Ltr. (250 Ltr. netto) Vessel sizesdia. 750x1020 mm Dished topcheck Dished bottomcheck Top connectionsDN50 (3x) OutletDN40 Max. temperature0/-25 °C (design: -30/200 °C) With jacketcheck (40 Ltr.) Max. temperature0/-25 °C (design: -30/200 °C) Information Mounted on legscheck Weight300 kgPressure vesselsKrestaTanks > Pressure vesselsBrand > Kresta What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinati ...

General SKULT009 LocationGermany MakePharmatec GmbH TypeFluent Tank No.12563 Year of construction2021 Specified Features - Pressure vessel Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume350 Ltr. Pressure3 Bar Vacuumcheck Pressure vessels MaterialStainless steel 1.4404 (316L) Capacity350 Ltr (460 Ltr) Vessel sizesdia.791 x696mm Dished topcheck Dished bottomcheck With covercheck OutletG1 Max. temperature-10/95°C. With propellor stirrercheck Magnetic ZETA, Type BMRT 125 PI Ex S Dk Y Motor0,18kW, 230/400V, 2825rpm (EX) With variable speed drivecheck Speed mixing shaft75-540 rpm Information With switchgearcheck Total height+/- 1,7 m CEcheck Mounted on legsplatform With switchcheck Extra SpecificationsThe tank is equipped with pressure gauge, temperature sensor and level switch ...

General SKU397X1104 LocationBarneveld MakeLauda TypeSUK 350 W Mach.No.HSK07001 Pressure Working pressure10 Bar Main Features Heating (medium)Steam Capacity25 KW Temp.70 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck Heating medium:Water / Glycol 80:20 Heating capacity25 kW Electric capacity51 kW, 400 volt With coolingcheck Capacity15 kW at 0 °C Temperature0/70 °C Tank capacity30 Ltr. With pumpcheck Capacity6 m³/h Motor3 kW With temperature controllercheck (PID controller SR 500 - as is) Information Year of construction2007 Mounted on framecheck Total height2,24 m CEcheck Floorspace1,2 x 1,9 m Weight1100 kg Extra Specifications Connections (outflow/return): :DN 32 Compressor: Hermetic piston compressor Delivering pump: 6 m³/h Pump motor: 3 kW Filling volume (heat carrier circuit): approx. 30 L Refriger ...

General SKU397X1129 LocationBarneveld MakeLauda TypeSUK 350 W Mach.No.B14 730 Pressure Working pressure4 Bar Main Features Heating (medium)Electric Capacity44 KW Temp.80 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck Water heatercheck Heating medium:Water/Glycol (1:1) Heating capacity1 m³/h Electric capacity44 kW, 400 volt With coolingcheck (Water) Capacity12 kW at +10 °C Temperature0/80 °C Tank capacity60 Ltr. With pumpcheck Capacity3 m³/h Motorcheck With temperature controllercheck (PID controller - as is) Information Year of construction2003 Mounted on framecheck With switchgearcheck Total height2 m CEcheck Floorspace1,14 x 1,5 m Weight950 kg Extra Specifications Connections (outflow/return): :Flanges DN50: PN16: DIN 2633 Compressor: Semi-hermetic reciprocating compressor Delivering pump: Grundfos C ...

Key data: 4000 kN, 763 g/PS, 60 mm

Year of Make: 2000 Clamping force: 400 tons. Shot volume: 848 cm³ Screw diameter 60 mm Injection pressure increased: 2,421 bar Good condition, immediately available

Offer 23330 Specifications: - Semi-automatic sawing machine with hydropneumatic - Saw blade feed - vise - Saw blade diameter 350 mm - 2 saw blade spindle speeds approx. 40 + 80 1/min - Cutting range at 90° around 110 mm - flat 120 x 80 mm - at 45° around 80 mm - flat 80 x 80 mm - Mitre adjustable on the left up to 45 ° - right up to 45 ° - Saw blade feed infinitely adjustable - Pneum . Material vise - E. footswitch - Pneumatic connection 6 bar - Drive 400 V / 1.4 / 1.8 kW - Coolant device - Space requirement approx. W 1000 x H 1500 x D 1200 mm - Weight approx. 300 kg

Offer 25433 Specifications: - Saw blade diameter 350 mm - 2 saw blade spindle speeds approx. 40 + 80 1/min - Cutting range at 90° around 110 mm - flat 120 x 80 mm - at 45° around 80 mm - flat 80 x 80 mm - Mitre adjustable on the left up to 45 ° - right up to 45 ° - Saw blade feed by hand - Material vise - Drive 400 V / 1.8 / 2.4 kW - Coolant device - Space requirement approx. W 1000 x H 1500 x D 1200 mm - Weight approx. 300 kg

GAS TURBINE CENTRAX PACKAGE OR ONLY CORE YEAR 1990 HOURS 40 000 PRICE LOADED IN FRANCE

Leopoldo Pontiggia V 350 Center height: 350 mm Maximum turning diameter: 700 mm Distance between centers: 6000 mm

Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Working Hours: 40413 Hour(s), Engine Condition: Core , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 280 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 350 , Generator Hz: 50 , Generator Volts: 415/240 , Generator Amps: 487 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/perkins-2306c-e14-tag2-generat or-350-kva-used/689, , = More information =, , Empty weight: 2.495 kg, Type number: 2306C-E14 TAG2 GENERATOR 350 KVA

Key data: 350 mm

SPECIFICATIONS: Saw blade: Ø 350 mm Installed power: 2.8 kW Voltage: 380 V Complete with table and extraction system

A two-component injection molding machine Krauss Maffei Multinject is available. Clamping force: 3500kN, platen dimensions X/Y: 1280mm/1190mm, second unit: 390CZ. Machine dimensions X/Y/Z: approx. 6300mm/2000mm/3100mm, weight: approx. 17000kg, control: Krauss Maffei MC4, operating hours: 78424h. The control is defective. Documentation vorhanden. An on-site inspection is possible.

Manufacturer: MEK Model: I-spector 350 Year of Manufacture: 2019 Type of Machine : AOI System Complete with PC, dongle Find more here - / Contact us at -

Two identical Brabender belt weighers are available. Belt width: 350mm, max. throughput: 1800kg/h, inlet diameter: 200mm, outlet diameter: 250mm, load cell nominal load: 5kg, accuracy: +/-1%, max. belt speed: 27m/min, max. bulk good density: 1.5kg/dm³. Machine dimensions X/Y/Z: approx. 1500mm/700mm/700mm, weight: approx. 180kg. Documentation available. On-site viewing possible.

- Hydraulic roundabout centering device - Blank counter holder - Machining unit BAE 1 (on the spindle box) optional 2. - Processing unit KA (in front of the machine) Specifications: Blank diameter (max.): 700 mm Tip width : 825 mm Tool holder DIN 55027: Gr. 6 Axis force (transverse) (max.): 22 kN Axis force (longitudinal) (max.): 20 kN Stroke (transverse): 250 mm Stroke (longitudinal): 400 mm Transverse speed: (max.) 6.0 m/min Longitudinal speed: (max.) 6.0 m/min Stroke ejector: 200 mm Tailstock stroke: 400 mm Speeds (infinitely variable): 100-2,800 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 3,500 kg

Offer 25435 Specifications: - Plate length approx. 3500 mm - Plate width approx. 1750 mm - Plate height approx. 350 mm - Left + right screwed rectangular tube 200 mm each - Thickness of the top plate approx. 80 mm - 6 T-slots in table surface length 3500 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. 35 / 60 mm - T - groove depth approx. 60 mm - Space required: L 3500 x D 2100 x H 350 mm - Weight approx. 4200 kg

Height=2.3 m, Overall length= 2.06 m, Overall width= 1.2 m, Net weight= 818 kg,

Key data: 3500 kN, 70 mm

DEMAG Ergotech 350/710-2300 Concept • Clamping Force: ~3,500 kN (≈350 ton) • Injection Unit: • Screw Diameter: typically 70 mm • Injection Volume: ~1,212 cm³ • Injection Pressure: up to ~1,877 bar • Tie Bar Spacing: ~710 × 630 mm • Plate Dimensions: ~710 mm plate width • Opening Stroke: ~675 mm

Dimensions (L/W/H): 1700x2000x2550 mm Weight: 1400 kg Total power requirement: 4,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Resolution X/Y/Z: 600dpi/600dpi/1600dpi, max. build dimensions X/Y/Z: 342mm/342mm/200mm, max. materials per component: 82, min. layer thickness: 16µm. Machine dimensions X/Y/Z: approx. 1400mm/1300mm/1100mm, weight: approx. 450kg. Documentation available. On-site inspection is possible.

SEGATRICE AUTOMATICA a Doppia Colonna SHARK 350 NC HS 5.0 + Evacuatore Motorizzato a Paletta Segatrice a nastro automatica, a doppio montante, per eseguire tagli a 0° su acciai da costruzione, inox e legati, pieni e profilati, con dimensioni comprese in 350x350 mm. Di serie completa di: Evacuatore di trucioli motorizzato dragante, applicabile a destra o a sinistra della macchina. Regolazione della pressione delle morse. Alimentatore con rulli verticali per il contenimento delle barre. Macchina a controllo numerico CNC MEP 50-Windows CE” Based, progettato da MEP per l’automazione delle macchine di propria produzione. Ciclo di taglio taglio pulito” - L’alimentatore arretra la barra per evitare delle rigature sulla superficie tagliata quando il nastro torna in alto. Sistema di controllo a bus di campo con doppio microprocessore con collegamento seriale. Interfaccia uten ...

length: 2000 mm width: 2000 mm height: 350 mm total power requirement: - kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: 220,9 m Sonderpreis EXW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Heidenhain TNC 620 Travel X/Y/Z: 350 x 250 x 300 mm Spindle speed 12,000 min-1 Round and swivel table Tool magazine for 20 Wkz. ISO 30 Chip conveyor LANG Automation EcoCompact 10 Approx. 100 tool holders ISO 30

The system consists of a KHS INNOPAL RK6-350 palletizer from 2004, a KUKA KR 360/1 industrial robot and a Siemens Simatic S7 automation controller. The system is suitable for the automatic palletizing of cartons, bottles or PET-packaged products.

CONTROLS   PLC SIEMENS S5 95U PRESS DESIGN   drive system: hydraulic   openings in uprights: yes PRESS FORCES   total force (nominal): 350 to PRESS TABLE   table surface (left-right): 1600 mm   table surface (front-back): 1400 mm SLIDE   stroke: 1200 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 250 mm/s   working velocity min.: 14 mm/s   working velocity max.: 50 mm/s TOOL ASSEMBLY DIMENSIONS   distance table - slide max.: 1250 mm   distance between columns (H-frame): 1650 mm   passline opening (free passage in side columns): 630 mm ELECTRICAL SPECIFICATIONS   total power consumption: 60 kW DIMENSIONS / WEIGHTS   height above floor level: 4300 mm   height under floor level: 1000 mm   total weight approx.: 2400 ...