w 350 used for sale

Metal band saw blade, band saw blade -unused -Number: 7x sheets available -Price: per piece -Toothing: 6/8 -Dimensions: 4570 x 41 x 1.7 mm

Three-jaw chuck, three-jaw lathe chuck -Clamping plate -Mouth size: Ø 160 mm -Quantity: 2x food available Price: per piece -Weight: 7 kg

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-24 m/min. total power requirement: 27 kw Dimensions (L/W/H): 3900 x 2200 x 2000 mm weight of the machine ca.: 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ------------------------------------- Machine will be checked ! Technical data summary (please inquire about any additional accessories included) ------------------------------------- Generally ------------------------------------- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed motor: 4 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ------------------- ...

throat: 645 mm workpiece height max.: 550 mm stroke: 360 mm table diameter: 650 mm milling-head swivable +/-: 15/80 no. of strokes: 100 Hub/min total power requirement: 6 kW weight of the machine ca.: 4,3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

From insolvency: Converter Wacker FU 1.6 380 volts 2x cylinder connection 3-pin untested, because there is no suitable vibrating bottle available

Three-jaw chuck, three-jaw lathe chuck -DH200x3-III -TGL: 30-2332 -Mouth size: Ø 200 mm -Recess: Ø 155 mm -Bolt circle: Ø 174 mm -Through hole: Ø 57 mm -Weight: 12 kg

Key data: 5 , 230 mm, 130 mm

I sell the Weinig Unimat 300 four-sided planer, built in 2004 Feed speed 5-30 m/min. Working width 230mm Working height 130mm 5 Spindle Configuration: bottom - right - left - up - down Combined power 28kW 3-zone pneumatic pressure Good condition. Fully operational! Available soon. Includes full documentation and CE certification.

Pressure reducer, pressure regulator -Type: 002 3539 -Connection: Price: per piece -Number: 6 available -Weight: 0.5 kg/piece

centrifugal pump, water pump, multi-stage vertical centrifugal pump -Max. flow rate: 5.0 m³/h -Pressure: max. 25 bar -Motor power: 3 kW -Speed: 2840 rpm -Housing and impeller made of: stainless steel -Weight: 45 kg

Roller chain, drive chain -Type: 08 B-1 -Length per package: 5 m -Price: per chain -Number: 3x available -Weight: 3.5 kg

Backstation Backcombi Wiesheu Dibas EBO 64S- L Wiesheu Backcombi consisting of 1x convection oven Dibas 1x exhaust hood, 3x shelves EBO and base frame -Exhaust hood 64_200-240V50/60H Year: 2016 Convection oven Wiesheu Dibas 64 S C: -for 5 trays each 60x40cm -Voltage: 400V 50Hz -Power: 9.6 kW -Year of construction: 2016 Deck furnace 1x shelf EBO 64-S: -for 1 tray 60x40cm -Floor entrance height: approx. 15cm -Voltage: 400V 3/N/PE -Power 3.45 kW -Year of construction: 2016 Deck oven 2x shelf EBO 64-L: -one tray per shelf 60x40cm -Floor entrance height: approx. 13cm -Voltage: 400V 3/N/PE -Power: 7.1 kW -Year of construction: 2020 External dimensions complete approx.: 93x100x221cm

Shelf Shelving System Spare Parts Warehouse High Rack, Storage Rack, Industrial Rack Used Manufacturer: GEMAC Spare parts warehouse over 3 walk-in levels with floors, elevator and office space approx. 25000 sheet metal shelves each approx. 400 x 1100 mm Shelf load: 80 kg Load max: 500 kg Field width: approx. 1100 mm Depth: approx. 400 and 800 mm Shelf height approx. 1800 mm The plant is currently being dismantled

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder -Number: 1x recordings Manufacturer: Komet -partially with internal water cooling -Weight: 12 kg

Weibert SD 510 Dressing thickness planer including 4-tersa knife shaft Planer width 510mm Dressing table length 2250mm Planer fence 1500 mm 90°-45° Machine Grey Cast Iron Tables 5.5 KW (7.5 HP) 400V Thicknessing table 1050 x 510mm Passage of 250mm Numerical display thickness table Electric height adjustment of the thickness table 2 infeed speeds 6 & 12 m/min Dual folding system of the tables to the rear Weight of 900 kg G&RO-SD510NE-TER

TIG hose assembly, welding torch, hand welding torch, TIG torch -with burner body -Length: 8 m -Weight: 6 kg

- Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Cable length: approx. 6m -Weight: 150 kg

amount: 39 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of shaker bottles: 1 piece -Cable length: approx. 6 m -Weight: 72 kg -Functionally tested

amount: 9 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of vibrating bottles: 1 -Cable length: approx. 6 m -Weight: 105 kg

amount: 63 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 1066 x 460 x 940 mm weight: 80 kg : 12 St. Mobile tool trolley, scope of delivery: Top drawer dimensions 954 x 400 x 134 mm Dimensions of the left drawers 569 x 400 x 75 mm | 569x400x154mm Dimensions of the right drawers 296 x 400 x 75 mm | 296x400x233mm Diameter rolls 12.5 cm Width of rolls 3.2 cm Maximum loadable weight of the large drawer is 35 kg Maximum loadable weight of the narrow drawer is 20 kg Maximum loadable weight of the tool trolley is 350 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 13 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 26 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gearwheel Shaping machine WMW Modul ZSTTK 1250x24

amount: 107 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Jacob White TFS Two flap sealer Serial: NS161C Stainless two flap sealer, variable speed, min box width 100mm to max box width 260mm, hot glue pots, mobile, 1Ph

Bread roll press, dough part and warp knitting machine WP Rotamat EN Dough dividing and warping machine W&P Rotamat EN for dividing and rounding Weight range per division from 30 grams to 70 grams 30 pieces with 3 plastic knitting plates One-handed operation with plastic knife 400 V / 1.6 kW Weight approx. 410 kg External dimensions approx : Width 69cm Depth: 65cm Height 150cm

Fiber optic measuring amplifier, fiber optic sensor, fiber optic cable sensor, universal reflex sensor, reflex sensor -Manufacturer: Wenglor, fiber optic cable sensor unused in original packaging -Type: UF87PA3 -Number: 3x sensors available -Price per piece -Dimension box: 105/90 / H40 mm -Weight: 0.2 kg / pc.

Compressor control, compressor control, control panel, control box, control unit -Manufacturer: WA Wille Automationstechnik, control box control unit -Type: unfortunately no type designation -Dimensions: 305/210/H110 mm -Weight: 4.2 kg

Cutter head, milling adapter, carbide milling cutter, indexable insert milling cutter, face milling head, milling head -Manufacturer: Widax-Heinlein diameter 173 mm -Type: M400 Ø160 R 12 607 -Number of teeth: 12 -Adjustment: SK50 -Dimensions: Ø 173/260 mm -Weight: 12 kg

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: WMW, live centering tip, 2 pieces -Type: ZN 205 -Recording: MK5 -Price/Sale: complete -Overall dimensions: 270/190/100 mm -Weight: 10 kg

Shell cutters, shell cutters, milling cutters, shell-type milling cutters -Manufacturer: WMW, shell mill -Inside: Ø 32/14 mm -Dimension: Ø 96 x 47 mm -Weight: 1.5 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -with burner body -Length: 4 m -Tuchel connector: 5-pin -Water: chilled -Weight: 2.7 kg

2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns -Mounting: Bolt Ø 40 mm -Die stamp: see photos -Dimensions: 690/290/H290 mm -Weight: 61 kg

fixed point, fixed center point, fixed morse taper, fixed centering point, centering points -Manufacturer: WMW ABW, fixed center point -Adjustment: Morse taper MK5 -Number: 9x center points available -Price per piece -Dimensions: Ø 46/200 mm -Weight: 1.9 kg / pc.

Cardan shaft, cardan shaft, universal joint -Cardan shaft: universal joint, unused -Type / order no .: 21001375 402027/201 7610AVA10 -Shaft: Ø 36 mm -Measurements: see photos -Number: 15x universal joint available -Price per piece -Dimensions: 120/62 / H56 mm -Weight: 1.1 kg / pc.

Drive shaft, cardan shaft, universal joint -Cardan shaft: Universal joint, unused -Type / Order No.: 21001375 402027/201 7610AVA09 -Shaft: Ø 24 mm -Dimensions: see photos -Number: 4x universal joints available -Price: per piece -Dimensions: 102/46/H50 mm -Weight: 0.6 kg/pc.

SOS Block bottom bag machine TRIUMPH I, 1 ply, 4 colours, photo cell, Tube width 3-7,5 cm, Tube length 12-34 cm, Bottom width 5-12 cm, machine ready for test production

Weibert FKK 315-2000E Sliding table saw Trimming length 2000 mm Saw blade diameter 315 mm Cutting height 100/80mm Cutting width with stop 1220 mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 3 kW 400 V Weight approx. 260 kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900317

Flat and satchel bag machine Matador 20, Windmoeller & Hoelscher, Tube width 9-20 cm, Tube length 10-32 cm, machine ready for test production

Weibert FS 32 Dressing thickness planer Planing width 320 mm 3-reversible planer knife shaft HSS Motor 3kW 400V 50Hz Passage height: 4-225mm Numerical display of the planing height Planed dressing and thicknessing tables WJ-300100

throat: 1410 mm workpiece height max.: 1150 mm stroke: 1400 mm table diameter: 1400 mm milling-head swivable +/-: 10 ram - range of adjustment: 750 mm pulling power: 50000 N workpiece weight: 10000 kg Ram stroke speed: 30 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tapping chucks, thread chucks, tapping chucks, milling tools, tapping attachments -Manufacturer: WMW ABW, tapping chuck holder MK2 with 5 pieces of holders -Type: GB2 M5 - M16 -Dimension: O 62 x 192 mm -Weight: 1.8 kg

Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, rotary table type RT 250 TG -Clamping surface: Ø 250 mm -Bore center: Ø 48 mm -Groove width: 12 mm -Dimensions: 460/400 / H150 mm -Weight: 44 kg

20-75- CNC router WOODLAND MACHINERY (new) Type SX1325A-4 Useful working area axis X-Y-Z 2850-2100-150 mm Shaft, air cooled, 6kw+4.5kw x 3 18000 rpm. Engine Hybrid servo Control system LNC system Repeat positioning accuracy 0.03mm Work table vacuum plate Vacuum pump 11kw Maximum speed 50000 mm/min Maximum working speed 25000mm/min Resolution ±0.05 mm System resolution ±0.001 mm Code G Inverter 7.5 kw Voltage 380V/50HZ Transport dimensions 3200x2100x1800mm Weight 2100 kg The price is 23100 Eur

SPECIFICATIONS Pilot plane on the entrance side: 2000 mm Grooved table Machinable width: max. 180 mm Machinable height: max. 150 mm Spindle diameter: 40 mm Shaft drive Drive shaft power: 4.0 Kw Soundproof booth Spindle Configuration: I Shaft: Bottom 4.0 kW II Shaft: Right 4.0 kW III Shaft: Left 5.5 kW IV Shaft: Right 5.5 kW V Shaft: Top 11.0 kW VI Shaft: Bottom 4.0 kW VII Shaft: Top 11.0 kW VIII Shaft: Universal 4.0 kW

Gear motor, electric motor, electric gear motor -Manufacturer: Watt Drive, gear motor type HG OKG 71N4 -Speed: 246 rpm -Power: 0.37kw -Torque: 14.4 Nm -Shaft: Ø 20 x 40 mm -Protection class: IP55 -Dimensions: 400/170/H210 mm -Weight: 15kg

Key data: 1120 mm, 345 mm, 400 mm

Table width 400 mm, table length 1600 mm Tool holder SK 50 Speed range 28-1400 1/min Travel X/Y/Z 1120/345/400 mm Feed range X/Y 16 - 800 mm/min, Z 5 - 250 mm/min Rapid traverse Milling head swivel range +/- 45°, quill stroke 90 mm Connected load approx. 14 kW Incl. coolant device Electric tensioner, bracket cover

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: MW Markisches Werk, hydraulic unit with container -Type: 1324 -Shaft: 12 x 8 mm, see photo techn. drawing -Individual components: see photos -Dimensions: 280/270/H450 mm -Total weight: 9.8 kg