w 350 used for sale

Weibert PHW 2508K Pallet truck Load capacity 2.5t Load width 540 mm Fork width 160 mm Fork length 800 mm Stroke range 85-200 mm Steering angle 186° Turning radius 835 mm LxWxH 1200 x 540 x 1235 mm Weight 60 kg G&STÜ-6152513

Weibert PHW 2508 Pallet truck Load capacity 2.5t Load width 540 mm Fork width 160 mm Fork length 1150 mm Stroke range 85-200 mm Steering angle 205° Turning radius 1281 mm LxWxH 1550 x 540 x 1235 mm Weight 67 kg G&STÜ-6152512

Weibert PHW 2507L Pallet truck Load capacity 2.5t Load width 540 mm Fork width 160 mm Fork length 1800 mm Stroke range 85-200 mm Steering angle 186° Turning radius 1790 mm LxWxH 2190 x 540 x 1240 mm Weight 100 kg G&STÜ-6152511

Weibert PHW 2508K Pallet truck Load capacity 2.5t Load width 540 mm Fork width 160 mm Fork length 800 mm Stroke range 85-200 mm Steering angle 186° Turning radius 835 mm LxWxH 1200 x 540 x 1235 mm Weight 60 kg G&STÜ-6152513

PLC transfer element, terminal, series terminal, through terminal -Manufacturer: Weidmuller -Type: E-694.0/84 -Dimensions: 105/185/H75 mm -Weight: 0.51 kg

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Power: 1.5kw -Number: 2x elements available -Price per piece -Dimensions heater: 65/65/H230 mm -Weight: 0.53kg

NEW - TB08148-1 - Electronics 230V from spare parts warehouse.

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 98 rpm -Power: 0.75 kW -Design: B5/B14/B3 angle -Diameter shaft: 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 440/260/H160 mm -Weight: 18 kg/piece

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 50 rpm -Power: 0.37 kW -Design: B5/B14/B3 angle -Diameter shaft: 20 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 405/250/H170 mm -Weight: 14.5 kg/piece

Key data: 9700 , 11000

Wartsila 20V34SG complete Gas Power plant 9.7 MW 50 Hz 11K Volts Year of make 2011 45.000 Working Hours Maintanence done regularly by wartsila 20V34SG engine with all auxilaries: ABB AMG 1120LT08 Alternator, compressors, Lt Ht water tanks, LV MV HV step up Transformers, control panels, Unic control system, radiators, maintanence tanks, 2 x Napier 357 turbochargers, safety spares, Caterpillar emergency generator,Natural Gas Regulator Unit, engine tools, instruction manual and more... Please contact for more info and complete scope / offer

Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver, hand drill -Nominal consumption: 650 watts -Max. Drill: 6 mm -Connection: 230 volts -Weight: 2 kg

Rotary unit, rotary device, turning table, conveyor belt, container rotary device, welding rotary device, welding device -Drive motor: 0.15/0.60 kW -Speed: 15/64 rpm -sealed: slewing ring -Device is: pneumatically tiltable -Dimensions: 2520/800/H380 mm -Weight: 524 kg

A used rack oven Wachtel Compact 1.8 KHV Stir from 2013 with gas burner is for sale and immediately available in our warehouse in Bielefeld. The stove is fully assembled in our warehouse. Rack Oven Rotary Oven Wachtel Compact 1.8 KHV Stir - Year of construction 2013 - with gas burner - Door hinge on the right - with exhaust hood including fan - with digital control - for 60x80 or 58x78cm trays - Operating voltage: 400 volts -Control voltage. 230 volts - Frequency: 50 Hz - Power 2.5 kW -20 pieces in stock -External dimensions approx.: 158x170x280cm WxDxH Trade-in and delivery possible, further pictures and information on request

Complete Genset, 0 hours after M6 maintenace, damaged crancksahft. (new bearings, liners, renewed turbochargers, renewed cylinder head, new main, pilot gas valves. Lot of spare parts available.

Tersa Knife Shaft Motor 3x 3HP, 400V, 50Hz Saw blade diameter 250mm Cutting height 85mm to 90° Cutting height 55mm to 45° Mandrel 3000/6000 rpm Sliding table 1450 x 320mm Cutting length 1200mm Mitre fence Eccentric clamps Weight 485kg G&RO-HX260-CE

Key data: 165 mm, 750 mm, 2800 U/min

Manufacturer: Gildemeister Model N.E.F. 320 K Year of construction 2004 Condition Used Siemens control system Specifications Circulation diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder Multifix size B Tailstock mount MK 4 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirement approx. 2500 x 1800 x 1885 mm Accessories: 3 Jaw chuck Forkardt 200 Tool package Documentation

turning diameter over bed: 380 mm turning diameter over slide rest: 0 mm turning length: 950 mm centre distance: 1000 mm centre height: 180 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ignition device for Jenbacher Manufacturer: WOOD WARD Model: IC-920 Serial No.: 15119859

Flow meter, pressure meter, flow meter -Pressure clocks: 2 -Water column: 1 -Dimensions: 400/300/H1000 mm -Weight: 5.2 kg

Ignition device for Jenbacher Manufacturer: WOODWARD Model: IC-920 Serial No.: 15152511

Specifications: Capacity 40 tons 2 strokes 57 + 86 H/min Projection 250 mm Plunger stroke 8 - 88 mm Plunger adjustment approx. 63 mm Table , WxD approx. 570 x 450 mm Max. installation height approx. 330 mm

Universal milling and drilling machine KUNZMANN WUF5/3 with Heidenhain ND 780 Built in 1989 in good condition. Technical data WUF5/3: Position indicator Heidenhain ND 780 The ND 780 position indicator is particularly suitable for use on milling, drilling and turning machines with up to three axes. Router table: Clamping surface 850x350 mm Clamping grooves 5 Groove width 14H7 mm Groove spacing 63 mm Workspace: Longitudinal (X-axis) 490 mm Transverse (Y-axis) 310 mm Vertical (Z-axis) 400 mm Max. distances: Top of the table up to Horizontal spindle centre 40 – 420 mm Top of the table up to Vertical head lower edge 350 mm Milling spindle: Tool holder SK40 Horizontal speeds 40 – 2500 min-1 Vertical speeds 40 – 2500 min-1 Quill stroke 60 mm Vertical head can be swivelled on both sides + - 90° Feed rate 1000 mm/min Rapid traverse 4000 mm/m ...

We are selling here a Menger from the manufacturer Stork u. Herrmann, type KM 90D in a very good used and functional condition. The machine runs on 400 volts, built in 2020, rollable, completely stainless steel, 90 litres, workshop tested, ready for immediate use, dimensions W/D/H 80/110/120 cm, others on request.

Gebrauchtmaschine

N. 14 cut bar trolleys Measurements: 1.77 width x 2.07 depth x 2.3 height m. Each slot is calibrated to 10 kg.

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 33 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 55 -Price: per piece -Number: 2x available -Weight: 13 kg

Walter AG Helitronic Power CNC Universal 5-Axis Tool Grinding Machine CNC control HMC 400 CNC X-axis travel 400 mm Y-axis travel 250 mm Z-axis travel 580 mm C-axis (table rotation) ± 200° Max. grinding wheel diameter Ø 200 mm Spindle speed (grinding) 3000 / 6000 rpm If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Tool changer for lathe, upper support, upper slide, dovetail guide -with four tool holders -Dimension: see photos -Dimensions: 400/260/H200 mm -Weight: 25.2 kg

Control for cleaning system -Type: Autoclude M1000 -Dimensions: 335/210/H120 mm -Weight: 4 kg

Pressure regulating directional valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 5350210030 -Price: per piece -Quantity: 10 available -Weight: 0.2 kg

Qty. 1 Second-hand steel strip production plant The plant consist of below lines: 20-High Sendzimir Mill Mfc.: Waterbury Farrel Built: 1960 Strip width: 330 – 660 mm Thickness Entry: 4.0 mm Exit: 0.076 mm 2-High Temper Pass Mill Mfc.: United Eng. & Foundry Co. Built: 1960 Strip width: 400 – 630 mm Thickness Entry: 1.6 mm Exit: 0.25 mm Tension Leveller Mfc.: TBA Built: 1982 Strip width: 500-1067 mm Thickness: 0.08-0.3 mm Tensile strength: 30-75 kg/mm² Bright Annealing Furnace Mfc.: Salem & Herr Equipment Built: 1960 Strip width: 150 – 610 mm Thickness: 0.254 – 2.7 mm

For sale is a processing plant for third-party take-back polystyrene - fully functional. Feeding table: 2000x2000x900 Belt conveyor: 1420x4000 Slope: 21° Transport speed: 4-16 m/min Design: (50Hz):8m/min Styrofoam mill: 2180x2496x1590 Filling opening: 1500x1000, weight 1500kg

Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -with: slip clutch -Integrated reversing gearbox with quick return -Thread cutting sizes: M2-7 -Recording: MK2 -Dimensions: 100/290 mm -Weight: 2 kg

Digital input device, Interbus -Tele-Link Version: 2.0 Siemens S5 -Weight: 1.7 kg

Tool holder, milling holder, milling tool -Quantity: 4x recording SK40 -1x Ø: 16 x 19 mm -1x Ø: 16 x 25 mm -1x Ø: 27 x 25 mm -1x: drill chuck - is only sold complete -Weight: 6kg

Machine Type: Kieserling Nine-Roll Straightening Machine Working range rods Ø 5 mm to Ø 30 mm Flow direction: from right to left Speed approx. 40 m/min Made by Kieserling & Albrecht, type WRUW 1 Length 2,060 mm Width 1,450 mm Height 1,500 mm Weight 3,700 kg Country of origin: Germany Delivery time by arrangement Other: The machine is currently being completely overhauled by our specialist company. The pictures show a machine we have just delivered. The one offered here will be in equivalent condition at the time of delivery!

Machine Type: Kieserling Nine-Roll Straightening Machine Working range tubes and rods Ø 5 mm to Ø 30 mm Flow direction from right to left Speed 40 m/min Make Kieserling, type WRUW 1 Location Solingen Length 1,600 mm Width 1,400 mm Height 1,600 mm Weight 3,700 kg Country of origin: Germany Delivery time approx. 4 weeks Other: The scope of supply of the machine includes the complete finishing for loading and removing the straightening material, consisting of: pre-bearing with roll-off slope, infeed channel with pusher, discharge channel with ejector, roll-off slope, collection belt trough.

Machine Type: Kieserling Seven-Roll Straightening Machine Working range tubes from Ø 15 mm to Ø 75 mm, rods Ø 20 mm to Ø 65 mm Flow direction from right to left Speed approx. 50 m/min Make Kieserling, type WRUN 1A Location Solingen Length 2,400 mm Width 2,000 mm Height 1,900 mm Weight 4,600 kg Country of origin: Germany Delivery time approx. 12 weeks Other: The machine is currently being completely overhauled by our specialist company. The pictures show a machine we have just delivered. The one offered here will be in equivalent condition at the time of delivery!

Weibert WJ-FS32-W7 Dressing thickness planer 3-reversible planer knife shaft HSS Motor 3kW 400V 50Hz Passage height: 4-225mm Numerical display of the planing height Planed dressing and thicknessing tables G&2972-2036-W7

collets: 3 - 20mm tool taper: Sk 430 weight: 4,5 kg dimensions: 350 x 250 x 100 mm Collet set 21 pieces Collets for 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 17, 18, 19, 20mm. Recording SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 of used glass bottling line for still and carbonated water Used for glass bottles 330 ml (D 61,3 x H 207,9 mm), 750 ml (D 78,0 x H 294,9 mm) and 1.000 ml (D 88,3 x H 318,7 mm) at speeds (limited by filler capacity) between 6.000 (1.000 ml) and 10.000 (330 ml) bph., mostly new 2000, plcs: Modicon, consisting of Ave Alta Meccaniche DBR50 bulk-bottle depalletizer, AVE 5.000 lph carbonator, AVE 24/24/6 rinser/filler/capper (28 mm ROPP), Kosme Unicol 720-9-2 dual-aggregate wet-glue labeler (new 2013!), Domino laser coder, Freemantle tray erector, Ave Alta Meccaniche type Inca 1T pick&place tray loader, (single-head machine, with heads for 12x 1000 ml, 12x 750 ml and 24x 330 ml), Dimac Starfilm LS film-only shrinkwrapper (overwrapping of trays), Ave Alta Meccaniche PABR 50/1 Palletizer. Some interconnecting conveyors.

Grinding lenght 6000 mm Grinding diameter 1050 mm

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 60 rpm -Power: 0.10 kW -Construction: B3 angle -Diameter shaft: Ø 10 mm -Protection class: IP 44 -Dimensions: 245/130/H110 mm -Weight: 3.8 kg

Collet chuck, tool holder, tool holder, milling chuck, milling tool -Recording: Ø 32 -Clamping sleeves: 4/6/10/12/14 mm -Price/Sale: complete -Total weight: 1 kg

- Convection oven from Wachtel with clipboard, proofer and exhaust hood - Convection oven is Thermico Plus with IQ Air control - Oven is for 5 trays 60x40cm - Proofer is for 16 trays 60x40cm -Electrical. Connected load: 13.7 kW - Year of construction: 11 / 2017 Dimensions: - 97cm wide - 85cm deep - 205cm tall

X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Table dimensions: 700 x 425 mm Spindle Exception: SK 40 Spindle speeds: 1 - 4000 rpm. Spindle stroke: 60 mm Equipped with: - ISO tool holders - Coolant system -Operating instructions Country of origin: Germany Motor power: 5 kW Machine LxWxH: 200 x 200 x 200 cm Machine weight: 2000 kg

Eccentric press vineyard type AR160 tons With protective shield. YOC 1971 2 rotational speeds via mechanical gearbox Switchable. Central lubrication. Low-wear steep-threaded coupling. Table dimensions : 800x1000 mm Visits : possible at any time. Total weight approx. 10.5 tons

Multi-spindle drilling machine make : Burkhard und Weber / Arboga With interchangeable table Dimensions : LxW 800 x 800 Equipped with 10 spindles, drilling diameter 13.5 mm Cam derailleur, automatic and set-up mode. 2 Coolant pumps . Propulsion : electro-hydraulic. Very powerful, it can be powered with 14 active spindles at the same time. become. Total weight: approx. 8.0 tons. (Forklift loading by GEDE possible)

Metal band saw blade, band saw blade, metal saw band -unused, original packaging -Number: 4 sheets available Price: per piece -Tooth pitch: 4 TPI -Dimensions: 5990 x 34 x 1.1 mm

turning diameter: ca. 500 mm swing diameter: ca. 600 mm travel -x axis: ca. 400 mm travel -z axis: ca. 600 mm spindle turning speed range: 2000 U/min spindle drive: 63 kW control: SIEMENS control: SINUMERIK System 3 tool turret: 1 x 12 Pos total power requirement: kW weight of the machine ca.: 9,3 t dimensions of the machine ca.: m - R-version, turret right hand side of 3-jaw chuck - Accessories: hydr. 3-jaw chuck 400 mmø, various toolholders for turret, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.