w 350 used for sale

Dimensions (L/W/H): 3750x1400x1750 mm Weight: 1600 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 355 mm : 12500 m³/h Motor output: 15 kW : 4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ORDER NO. 6575 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 170mm - 7 spindles: 1) horizontal bottom 230mm, 11kW 2) vertical right 170mm 3) vertical left 170mm (2 and 3 spindle), 11kW 4) horizontal right 170mm, 5.5kW 5) horizontal upper 230mm, 11kW 6) horizontal bottom 230mm, 7.5kW 7) universal 230mm, adjustable at 360°, 7.5kW - all spindles adjustable up/down, right/left - spindle 3 and 5 electrically adjustable - ATS - spindle diameter 40mm - electric brakes - from above 4 pulling introductory shafts, toothed including 1 double - from above the introductory roller pulling rubber double - from above the shaft leading out, pulling, rubber, double - from below 2 metal rollers, pulling, smooth - pulling roller, rubber, double - feed on cardan rollers - pneumatically pressed shafts - smooth adjustment of the feed spe ...

Dimensions (L/W/H): 3460x1000x2400 mm Number of filters: 73 St. Number of dust containers: 4 St. Weight: 410 kg : 355 mm : 520 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rollers for SM 52-2 2 new application roller d 64.5 _____250 EUR /pcs. 2 new application roller d 61 _____244 EUR / pcs.

Dear's Sale, used 4 diesel engine WARTSILA 12 ZAV 40 S Brgds Hakan KUSCU +905323642509

Dear's Sale, used 2 complete engine WARTSILA 6R32D Brgds Hakan KUSCU +905323642509

: 355 mm : 10000 m³/h Motor output: 11 kW : 4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 5000 m³/h power capacity: 5,5 kW Speed: 3000 U/min. : 280 mm Dimensions (L/W/H): 2460x1250x1600 mm Weight: 380 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6300x1600x2600 mm Weight: 5000 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5500x3400x1900 mm Weight: 9000 kg Total power requirement: 48 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Varex 3-layer blowfilm-extruder Head diameter: 630 mm Screw diameter: 70-90-70 mm( die gap: 2,4) Film width: 1390 – 2580 mm Film thickness: 10-200 my Output: max 480 kg /hour Winding diameter 1200 mm Core diameter 76/150/152 mm Energy: 295 kW/h Treatment: in+outside

Dimensions (L/W/H): 3450x1550x2950 mm Weight: 4500 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2440x1360x2060 mm Weight: 3000 kg Total power requirement: 42 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3000x3000x1800 mm Weight: 1000 kg Total power requirement: 10 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I sell a tenon machine for parallel milling, grooves for pallet tape etc. WACO T2-SL Year of construction 1984. Groove width 30mm. Motor 3,3kW Made in Germany. Available the same. With dokumentazion.

Dimensions (L/W/H): 1100x1500x2100 mm Weight: 800 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4450x1550x2950 mm Weight: 4800 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2860x1140x1100 mm Weight: 1070 kg Total power requirement: 19 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3000 m³/h power capacity: 2,2 kW Speed: 3000 U/min. : 200 mm Dimensions (L/W/H): 1250x700x2000 mm Weight: 160 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4300x1650x2520 mm Weight: 7900 kg Total power requirement: 108 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1180x860x710 mm Weight: 175 kg Total power requirement: 3,7 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MANUFACTURER: Westfalia TYPE: MSD 50-01-076 CAPACITY: 5.000 Lt/h for milk skimming & 7.000 Lt/h for whey skimming. MACHINE COMES WITH: Tools and instructions book

PRODUCT DESCRIPTION MANUFACTURER: Westfalia TYPE: MSE 25-01-177 YEAR: 2011 CAPACITY: 2500 Lt/h MACHINE COMES WITH: Tools and instructions book.

Dimensions (L/W/H): 3700x2400x1470 mm Weight: 1500 kg Total power requirement: 8,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 920x2100x2150 mm Weight: 300 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 920x2260x2150 mm Weight: 300 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Details Warehouse number 1105-03654 Machine Type Machining Center - Vertical Make ycm SUPERMAX Type wmc 1100 a Year of construction 1994 Control type CNC Storage location FRANCE Country of origin Taiwan Delivery time immediately Freight base EX WORK Technical details x-travel 1100 mm y-travel 600 mm z-travel 630 mm CNC control FANUC OM Table size 1200 x 600 mm Spindle holder ISO 40 bt Spindle speeds 45 - 8000 1/min Spindle drive motor 11 ( 30 min ) kW Tool changing device for 30 tools table load 1200 kg Projection 630 mm Operating voltage 380 V Rapid traverse speed 12 m/min Feed range 1 - 5000 mm/min Machine weight approx. 6.6 t Space requirement approx. 2.90 x 2.60 x 2.50 m Information - Control: FANUC o M - Coolant device MAGAZINE 30 COMPARTMENT DOUBLE ARM

Dimensions (L/W/H): 1000x3000x2200 mm Weight: 450 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8300x1600x2600 mm Weight: 6000 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x1220x1300 mm Weight: 1050 kg Total power requirement: 16,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1600x840x720 mm Weight: 210 kg Total power requirement: 5,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

S131GH Metal band saw Motor: 230V 1.1kW 50Hz Feed infinitely adjustable Band saw blade speed: 22/ 31/ 55 m/min Band saw blade 1638x13x0,65 mm Cutting angle -45° to 60° Dimensions 1085 x 498 x 978mm Net weight 78kg G&STÜ-3300131

Universal trailer sweeper, hydraulic drive by means of PTO plug-in pump (also directly hydraulically possible), sweeping width min. 1600 mm, sweeping width max. 1,900 mm, dust binding with water and spray nozzles (200 ltr. plastic tank). Sweeping container 700 ltr. (emptying hydraulic, tilt height up to 1500 mm), sweeping roller pressure adjustable. Side broom trimming currently steel bristles – also suitable for weed removal. Operation of the machine via cable remote control. YOC 1998. Field of application: Community paths, squares, leaf pick-up, litter pick-up, weed removal, etc. More used sweeping technology in stock, just ask us!

sheet width: 3000 mm plate thickness: 6 mm distance between columns: 3100 mm cutting angle: 1°15´ no. of strokes: 16 Hub/min down holder: 16 Stück back stop - adjustable: 750 mm total power requirement: 11 kW weight of the machine ca.: 5,7 t dimensions of machine L x W x H: 4,1 x 2,08 x 1,78 m Accessories: electr. back stop with DRO ELGO electric, angle front stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2765x2520x1730 mm Weight: 3600 kg Total power requirement: 55 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x2000x1950 mm Weight: 700 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 8 kg Total power requirement: 0,9 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4200x1650x2150 mm Weight: 7500 kg Total power requirement: 54 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wärtsilä Lipstronic thruster control system overhauled. W006927795 Lipstronic 793.083.001.0001 Printcard Thruster Control System

WIWOX MC 110 II ultrasonic cleaning machine, built in Germany in 2004, cleans metal parts from unwanted deposits using ultrasonic waves. The use of such technology allows for fully professional cleaning of workpieces, as well as preventing surface damage and saving time and costs. The ultrasonic cleaning machine allows for cleaning workpieces weighing up to 110 kg, even in the most inaccessible places. The cleaning process takes place in a working chamber with dimensions (L x W x H) of 516 x 360 x 435 mm, where the placed workpiece is cleaned by ultrasonic waves at a temperature of 80°C for approximately 5-15 minutes. The total weight of the device is 280 kg. Specification of WIWOX MC 110 II ultrasonic cleaning machine - dimensions of the working chamber (L x W x H): 516 x 360 x 435 mm - maximum weight of workpiece: 110 kg - ultrasonic power: 1.2 kW - connection power: 6.2 kW  ...

WENZHOU HT-GF500B automatic disposable gloves making machine built in China in 2020, is intended for the production of foil gloves used for example, in grocery stores or in production. A solid machine body made of high-quality steel ensures high stability of the structure even at maximum production speed. The machine for making plastic gloves produces up to 220 pieces of disposable gloves in one minute, with a maximum length of 400 mm and a maximum width of 300 mm. The manufactured foil gloves have two layers of foil with a thickness of 0.008 mm to 0.02 mm, thanks to which they effectively protect hands against bacteria and viruses. The total weight of the machine is approximately 1600 kg. There are six such machines on sale, all built in 2020. Characteristics of the WENZHOU HT-GF500B automatic disposable gloves making machine - number of produced gloves: 180-220 pcs/min - num ...

X=3500mm Y=2000mm Z=1250mm W=800mm H=360° spindle 130 mm, ISO 50, max. 1600 rpm table 1600 x 1800 mm with a load of 12000 kg with Siemens electric and CNC Heidenhain TNC 415B Oil cooled: Schimpke. Dismantled. The machine has been used very little = in very good technical condition.

Dimensions (L/W/H): 2500x730x1280 mm Weight: 550 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2950x1550x2950 mm Weight: 4000 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1340x1050 mm Weight: 640 kg Total power requirement: 1,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5800x2250x2100 mm Weight: 2900 kg Total power requirement: 24 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double head saw EMMEGI NORMA 400 TU/4 Screwing unit GEVO SE1-SA Double head welding machine URBAN AKS 1200 Single head welding machine PRESSTA EISELE APOLLO End milling machine HAFFNER AF 362 Drain slot milling machine ROTOX FWS 380 Copy router STB F130/S Corner cleaning machine STB WP-OF2 Glazing bead saw HAFFNER GL 172

Dimensions (L/W/H): 4200x1650x2250 mm Weight: 7900 kg Total power requirement: 54 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.