126,720 used machines on RESALE, but how to find them? Machine Search
Weibert FR3 Saw milling Demonstration device Format sliding table 2300mm or 2600mm Cutting height: 103mm Auslegertich kpl. Saw blade: swivel, max.315mm 3KW motors Milling: rigid 90° Milling rpm: Speeds: 1500/3500/6000/8000 rpm. Safety rails milling stop 500mm Right- and left-hand-running milling cutter WJ-400100
Greerco High Shear Division, USA No. 3-23422 Power: 7.5 kW, ABB with funnel, circulation line, three-way valve on a stable mobile stainless steel frame Machine as good as new, unused Dimensions LWH: 700 x 700 x 1700 mm with double jacket for heating and cooling Weight: approx. 180 kg
Swivel cube table for radial drilling machines Table size: - horizontal: 500 x 600 mm - vertical: 310 x 600 mm Tiltable: 90° Dimensions LxWxH, approx.: 700 x 520 x 520 mm Weight, approx.: 280 kg
[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears
Raimann ProfiRip KR 310 M My. 2004 Multi-blade rip saw with 2 adjustable saw blades Track width 340 mm Total - passage width max 950 instead of 800 mm Cutting height with / without pressure board 115/130 mm Workpiece length 450 mm min Saw blade max. diameter 380 mm Saw blade min. diameter 250 mm Saw blade bore 80 mm Saw spindle diameter 65 mm Saw spindle speed 3900 rev / min Engine 30 kW Laser - directional lights 3 pc. Operating push 6 bar Infinitely variable feed - speed 8-48 m / min. 1.5 kW Weight 3400 kgs Voltage 400V/50Hz
Wabäma Economy Plus bread cutting machine with long bread inserting tray suitable for 52cm of bread. -with sickle knife -with oiling -Built in 2007 -Cutting width adjustable -three-phase current 400 volts -Rated power 1.9 A -Control voltage 24 volts -Operating voltage 24 volts -Weight 285 kg
Massive aluminium die-cast base Engine S1: 1800W Weight: 23kg HM Circular Saw Blade D: 305mm Idle speed 4200 rpm Swivel -45/+45° extendable back stop Quiet Belt narrow laser stroke marks exactly the cutting line Deep stop G&HM-KAP-305JL
Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader Npjrx All the goods in very good, ready-to-use condition.
Running bezel of a hamlet E110 The bezel is almost unsubstonible
Wohlhaupter turning head in the suitcase Wohlhaupter UPA6/3944 in a wooden case with accessories SK50 Type UPA6
Parts cleaning system Industrial washing machine degreasing made entirely of stainless steel! Manufacturer Render Type W175 Built: 1994 5 loading trolleys with 5 washing baskets, Basket size 1,125 x 1,125 mm Manual workstation with viewing window on one side with integrated high-pressure cleaner. Machine to be loaded/unloaded from both sides! Machine comes from an operating resolution and was in use until dismantling. Tank capacity approx. 2,000 litres, oil scimmers, filters, high-pressure pumps... Vertical door opening (lifting doors) on two opposite sides. This allows you to load on one side and unload on the other side. Due to the very high inner height, the system offers an optimal possibility to accommodate both very heavy laundry material as well as parts with large dimensions.
Deck Oven Wachtel Piccolo II-3 with Proofer -DMS 3 Master EM - 3 floors - 120cm wide and 80cm deep on each floor - With fixed water connection - each floor is equipped with a separate steam box - Each floor with separate controls - Top and bottom heat can be controlled separately - with proofer - Oven can be moved on castors - Control DMS 3 Master Timer - electr. Connected load 26.9 kW - Each floor with separate 16A CEE plug - 1 floor entrance height is 20cm - 2 floors floor entrance height is 16.5cm - Year of construction 05 / 2013 - External dimensions approx. wide: 156cm Depth: 134cm and 202cm high (height can be adjusted on the roller holder)
ULTRAPRAS WKR70H hydraulic press built in 2021 by the Polish company SAKOMET is designed for even the most demanding cold metal forming operations. The operations, such as precise cutting, stamping, punching and extruding of workpieces, are performed with a force of 16 tonnes using a hydraulic cylinder with a diameter of 100 mm. Induction limiters additionally allow adjustment of the piston advance and retraction limits, making the machine adaptable to the working range of various tools. In turn, centrally beneath the piston is a large cross-cut work table with a 90mm diameter bore. The UltraPras WKR 70H 16t hydraulic press weighs 420 kg. Technical specifications of the ULTRAPRAS WKR70H press - press force: 16 t - piston stroke: 70 mm - piston diameter: 100 mm - maximum working speed: 9.8 mm/s - minimum working speed: 2 mm/s - return speed: 20 mm/s - work table dimensions (L x ...
FREWITT GRANULATOR, MODEL OSCILLO WITT-3 Year of construction: 2017 Mobile oscillating and rotating sieve mill, for the gentle milling and deagglomeration of heat-sensitive and difficult-to-process products to a fineness of 250 µm. Particle size range: 5 cm - 250 µm Throughput: up to 600 kg/h Product density: up to 2 kg/dm³ Temperature range of product: from -20°C to +60°C Thanks to the continuously variable oscillatory or rotary motion, the constant uniform speed and force application, the product is milled with a very uniform grain-size and a low fraction of fines. DIMENSIONS Length: 1299 mm Width: 860 mm Height: 1417 mm ACCESSORIES INCLUDED 1 mobile HOVMAND drum lifting system (with battery) Sieves 1.00 x 0.63 mm 0.80 x 0.50 mm 2.00 x 1.00 mm 1.00 x 0.63 mm 0.315 x 0.20 mm 1.50 x 1.00 mm 6.00 x 1.50 mm 3.15 x 1.50 mm 0.80 x 0.50 mm ...
Ward Bekker Metal detector checkweigher Model: ACW25 Serial: 10012261 Stainless, Twin lane metal detector checkweigher, overall length 3400mm, belt width 75mm, max product height 100mm,
Two unused tables from paller horizontal borer Skoda W180NC 2240x2240cm of clamping surface and the weight of one table is 6500kg
Woelfel B100/S used machine Spindle dia 125mm MK 6 Ram dia 165 mm with stroke 200 mm Spindle speed in 24 steps from 30 - 1200 rpm Vert. travel of headstock 1250 mm Bed clamping surface 870 x 700 mm Additional table 710 x 560mm height 500 mm Height between bed and spindle nose 1460 mm
Mikron Milling Machine WF2/35 - Width: 120 cm - Depth: 140 cm - Height: 180 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
-Circular knife bread cutting machine -Cutting width 400mm -Note thickness adjustable -Built in 2015
20-09-511 Vacuum Cleaning Machine WOODLAND MACHINERY (new) Type LBM250C Motors 2 x 0.75 kW Working length 1300 mm Working thickness 80 mm Transport Dimensions 2400x600x1300 mm Weight 340 kg
Wilms indoor heater new ovp Manufacturer Wilms Type B125 Diesel Oil-powered heaters with open flame, e.g. for deicing or thawing materials, vehicles, pipelines, etc. As additional heating of stables as well as of operating and storage rooms with sufficient ventilation. Electric connection: 230 V, 50 Hz. Room thermostat installed as standard. Type: B 125 Heating capacity: 40 kW - 34,400 kcal/h Air power:: 920 m3/h Consumption: 3 kg/h Tank: 38 l Weight: 24 kg
used
The HKB series swivel machines are used for bending thin sheet metal. Due to their compact design, they fit easily into small workshops and cover a wide range of applications with their segmented upper tool. With an adjustable angle stopper, these swivel machines are also suitable for the production of small batches. Compact and torsion-resistant Segmented upper tool for many bending options Integrated, manual bend compensation Adjustable angle stop for series production Hands free Foot control of the upper bolster clamp Workspace Working length 1270 mm Sheet thickness (max.) – 400 N/mm² 2 mm Dimensions (length x width x height) 1.6 m x 0.9 m x 1.18 m Weight 330 kg Angle range of the bending beam 135°
20-09-510 Edge Banding Machine WOODLAND MACHINERY (new) Type GB/T10850 Engine power 0.18 kW Air Pressure 3-6 Bar Voltage 220 V 50 Hz Total Power 1.4 kW Heating Capacity 1.2 kW Edge width 8-50 mm Edge thickness 0.3-3 mm Feed speed 0-26 cm/s Vacuum workpiece Attraction Transport Dimensions Weight 300 kg
20-90-542 Multeosill Drilling Machine WOODLAND MACHINERY (new) Type: BM21S Number of shafts 21 Adjustable drilling angle Working width 700 mm Table Dimensions 1000 × 900 mm Additional support Ruler 3000 mm Number of Pressers 2 Engine power 1.5 kW 380 V 50 Hz Required Air Pressure 8 bar Drilling Step 32 mm Weight 150 kg Transport Dimensions 1200x1000x1300 mm
Precision machining center, control Siemens Sinumerik 840 D Solution Line, travels: X-axis 400 mm, Y-axis 500 mm, Z-axis 425 mm, spindle spacing 400 mm, version with 2 independent Z-axes, 5th axis 2-axis direct driven, 2 - work spindles HSK-A63 1-17,500 rpm, drive system torque motor, equipment including: rotary distributor, tension bridge supports, pressure amplifier pneumatic, tool magazine ges. 120 tool positions (2 x 60), pressure changeover hydraulic, clamping hydraulics basic module, high-pressure pump 70 bar, emulsion mist separation system, automatic loading door, air interrogation control, inductive tool breakage control, tool life monitoring, scraper belt conveyor KNOLL 800 K-1/400, cooling lubricant cleaning compact belt filter KNOLL FKA 1200 and much more.
20-27-518 Reismusas WOODLAND MACHINERY (new) Type MOTO530 Max. Working width 530 mm Max. Working height 300 mm Max. Cutting depth 8 mm Engine 4kW/380V/50Hz Dimensions of the Working table 1050x532 mm Spindle rotation speed 4800 rpm Min. Working length 280 mm Knives 4-30x530x3 Electrical filing 0.5 kW Electric height adjustment 0.33 kW Feed speed 5-20 m/min Transport Dimensions Weight 835 kg
Differential pressure gauge, A2G-15, -50/0/50Pa, Wika, mint condition -30% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Differential pressure gauge, A2G-15, -50/0/50Pa, Wika, - Output 4-20mA - Max. Pressure 20kPa 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court ...
20-29-558 Grinding Machine for WOODLAND MACHINERY (new) Available in installments Type SD W4 Max. Working width 200 mm Max. Working thickness 150 mm Min. Working length 450 mm Feed speed 3-25 m/min Right and left grinding shaft size 300x150 mm Feed motor 380V 50HZ 0.25 KW 1430r/min Grinding Head motor 380V 50HZ 1.5 KW 1430r/min Power 6.75 kW Transport Dimensions 2400x1800x1300 mm Weight 450 kg
ZIM Hülsta Carcase Erector The carcass erector is used for erecting and transporting assembled carcasses. Carcase erectors are usually used for carcass presses with a continuous device. It facilitates handling when setting up large workpieces. Transport and assembly device within a corpus assembly line. Behind a continuous carcass press, the pressed carcasses are placed on the back with the help of this device. Assembly work on the underside can thus be carried out. Make: ZIM Hülsta-Werke Type: Carcase erector Metrics: More items - new and used - can be found in our shop! International shipping costs on request!
Many thanks for your interest in our machinery, please find below our offer: manufacturer: Walther Trowal Type: polishing machine TT25-E / grinding machine - finisher year: 1989 Volume ca. 25 Liter Speed: ca. 250 U/min electrical: 400 V / 50 Hz, 1,5kw different: - Tops made from polyurethane - Polishing / ball mill / grinding machine - Fresh water and wastewater connection - The machine is mechanically complete. reconditioned, sandblasted and repainted, see pictures - The PU parts have not been replaced Surface grinding system / grinding system for polishing, rounding, deburring, grinding, cleaning, descaling, oil removal, polishing of stamped, cast, formed, forged and sawed parts or machined workpieces, sensitive parts such as jewelry, steel, plastics etc. or massive large parts. We offer this machine in checked/cleaned/painted” condition, without warran ...
Weibert Z-400-EL Format circular saw Sliding table 420x3200 mm anodized, cutting length 3500 mm Motorized height adjustment and inclined position saw blade 3 Cutting speeds: 3000/4000/5000 rpm Car. Star/Triangle Switch 7KW 400V 50HZ Vorritz engine 1.3 kW 3 Cutting speeds: 3000/4000/5000 rpm Cutting height at 90° 125 mm, at 45° 90 mm Cutting width between saw blade and parallel stop 1350 mm Laying table (1420 x 650 mm) with miter stop with 2 folding stops G&RO-Z-400-EL
2 plies, 4 colours Bag width: 5-12 cm Tube length: 12-34 cm Bottom width: 3-7,5 cm
maximum number of results exceeded
please refine your search
