w 350 used for sale

Manufacturer: Weinig, Type: Conturex 1, Year: 2004, Control: 840 D, Program: Alphacam, Working range X: 1.500, Working range Y-axis: 250, Working range Z: 125, C axis: yes, Number of milling spindles: 2, Milling engine 1 hours power: 10,5, pm: 18.000, Milling engine 2 hours power: 10,5, pm: 18.000, Number of tools per tool-magazine: 36, Year :2004

Manufacturer: Weeke, Type: BP 195 T, Year: 1996, Throuh running machine: yes, Working range X: 3200, Working range Y-axis: 1300, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 7,5, r.p.m: 18000, r.p.m: 18000, Number of tool magazines: 1, Number of tools per tool-magazine: 8, Rollentisch: yes, Vacuum pumps m³/h: 120, Bohrer vertikal: 44, Auslegermaschine : yes, zwei getrennte Bohrgetriebe mit einzelnen Achsen Raster 32 mm, Year :1996

TOS ,W 100 , YEAR 1976, SPINDEL MORSEA

Wipotec continuous scale 1500-1100-1000 RA2394 No Controller, optional retrofittable This belt conveyor is designed for products up to a maximum of 60 kg. Manufacturer: WIPOTEC Type: WM10 Year of construction: 2010 Total size: approx. 1500 x 1100x 520mm (WxDxH) Electrical connection 1x Light barrier 1x Sick Stegmann DKV60-E1Z0-S05 1x Closeness sensor for speed measurement Weighing technology: Weighing range: 0 - 60000 g calibration values e: from 10g degree of accuracy d: 1g TYP: IW-B 150K Conveyor belt 1500-1100-1000 and SEW gear motor Conveying length (FL): 1500 mm effective width (NUB): 1100 mm belt width (GB): 1000 mm hight (BH): 420-545 mm Motor Type: SEW Gearmotor Motor Power: kW 0.75 S1 Hz 50 Speed: 1,25 m/s Features: Nominal / outside width in mm: 700 scope of delivery: including supports without side guides, inklusive Frequenzumrichter, inklusive Lichtschranken Conveying length ...

Optima EC automatic continuous scale 1390-750-1500 RA1259 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of construction: 2000 Machine type: automatic checkweigher Total size: approx. 1390 x 750 x 1500 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative ...

Manufacturer: Laska Type: WINKIELWOLF type WW 200 2 Year of production 2015 Power:36 /38 kW Scale: 1600 kg Length x width x height: 2542 x 1453 x 1600 x with mast loading 2846 mm Power supply: 400 /50 Hz Hopper capacity: 350 L With mast loading, hydraulic type BA 24 for 200 L standard wagons Perforated disc diameter 200mm Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60

ECKERT Opal WaterJet COMBO waterjet cutting machine was built in 2011 in Poland by ECKERT AS Sp. z o.o. The machine, designed for precision machining of workpieces with a maximum thickness of 250 mm, combines all the benefits of plasma and waterjet cutting. The machining process is performed on a robust, large work table by means of a powerful cutting head. All table travel components are protected by bellows guards to ensure uninterrupted operation for many years of use. The design made of high-quality closed steel profiles, in turn, guarantees the highest stability during even the most demanding challenges. The ECKERT Opal COMBO WaterJet is offered with, among others, CAD/CAM software and a 37 kW high-pressure pump. Technical specifications of the ECKERT Opal WaterJet COMBO water cutting machine - maximum workpiece thickness (water machining): 250 mm - feed rate: 25000 mm/min - w ...

Wrapper Erka Model: WMB 30 for all spears such as Kornspitz, pretzels and pretzel sticks, etc. Combi wrapping machine for skeins/pretzel skeins Stainless steel Long scooter 300 mm foldable DGUV V3 tested Machine mobile Connection 400V, 1 kW, 16A-CEE plug Used machine overhauled with 3 months warranty + spare parts service Option: Maintenance contract Service Package Instruction & Commissioning Leasing & Rental Service We have a wide range of cone wrapping machines in stock!

System Components: Main Control Cabinet - Voltage: 3 × 400 V ±10% - Frequency: 50 Hz - Rated Power: 34.2 kVA - Current: 49.4 A - Fuse: 80 A (gG) - Protection: IP 54 - Type: RCE - Weight: 500 kg - Year: 2020 - Standards: EN 60204-1, EN 61439-1/2 Positioner / Workpiece Manipulator - Type: RPT_05000AR6D PL - Weight: 1800 daN - Year: 2020 - Enables PA/1G optimal positioning - Rotational Axes: 7 - Repeatability: ≤ 0.15 mm Dust Extraction Unit - Model: Dustec 4 XL - Power: 5.5 kW - Voltage: 400 V / N / PE - Air Supply: 6 Bar - Filter Class: M - Year: 09.2020 Welding Technology - Process: MAG (1-wire) - Wires Supported: Solid and flux-cored (Ø 1.0–1.6 mm) - Arc Modes: Short, spray, pulse, long - Power Source: Fronius TPS 600i - Process Optimization: Task-specific Robot & Sensor Periphery - Automatic torch changer - TCP calibration - Internal variable access for diagnostics - On ...

Note: The pictures serve to illustrate the material. - The workbench frames are picked unassembled; - The production time is usually about 3 - 5 working days. Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Height: approx. 940 mm The scope of delivery includes: 04x Square tube, used Material colour: sendzimir galvanised Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Borehole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma Profile, used Material colour: sendzimir galvanised CS-Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 02x CS Sigma Profile, used Material colour: sendzimir galvanised CS-Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm 01x Particleboard, used Particleboard thickness: 38 mm Particleboard width: 1,250 mm Particleboard depth: approx. 700 mm Surface: coat ...

New and unused Caffini Libellula 1-3 LB80 self-priming diaphragm pump. These slop pumps have been used since 1968. This successful pump type, also called cats head in practice, has remained virtually unchanged since that time. The pumps are suitable as a slurry pump or for small dewatering. This caffini libellula diaphragm pump is equipped with a Hatz diesel engine mounted in a mobile frame. Can be supplied with any desired coupling/connection. Max: 20 m³ per hour Max: 15 mWK 4 pcs. in stock If you have any questions, you can of course always contact us., , Throughput capacity: 20 m3/h, Max dirt passage: 50 mm, Motor brand: Hatz, Max. head: 15 MWK, Weight: 150 kg, , = More information =, , Year of manufacture: 2025, Colour: Blue, Applicable material: Water, Empty weight: 150 kg, Cargo space capacity: 335 l, Technical condition: very good, Visual appearance: very good, Price: On reques ...

New and unused Caffini Libellula 1-3 LB80 self-priming diaphragm pump. These slop pumps have been used since 1968. This successful pump type, also called cats head in practice, has remained virtually unchanged since that time. The pumps are suitable as a slurry pump or for small dewatering. This caffini libellula diaphragm pump is equipped with a Hatz diesel engine mounted in a mobile frame. Can be supplied with any desired coupling/connection. Max: 20 m³ per hour Max: 15 mWK 4 pcs. in stock If you have any questions, you can of course always contact us., , Throughput capacity: 20 m3/h, Max dirt passage: 50 mm, Motor brand: Hatz, Max. head: 15 MWK, Weight: 150 kg, , = More information =, , Year of manufacture: 2025, Colour: Blue, Applicable material: Water, Empty weight: 150 kg, Cargo space capacity: 335 l, Technical condition: very good, Visual appearance: very good, Price: On reques ...

New and unused Caffini Libellula 1-3 LB80 self-priming diaphragm pump. These slop pumps have been used since 1968. This successful pump type, also called cats head in practice, has remained virtually unchanged since that time. The pumps are suitable as a slurry pump or for small dewatering. This caffini libellula diaphragm pump is equipped with a Hatz diesel engine mounted in a mobile frame. Can be supplied with any desired coupling/connection. Max: 20 m³ per hour Max: 15 mWK 4 pcs. in stock If you have any questions, you can of course always contact us., , Throughput capacity: 20 m3/h, Max dirt passage: 50 mm, Motor brand: Hatz, Max. head: 15 MWK, Weight: 150 kg, , = More information =, , Year of manufacture: 2025, Colour: Blue, Applicable material: Water, Empty weight: 150 kg, Cargo space capacity: 335 l, Technical condition: very good, Visual appearance: very good, Price: On reques ...

New and unused Caffini Libellula 1-3 LB80 self-priming diaphragm pump. These slop pumps have been used since 1968. This successful pump type, also called cats head in practice, has remained virtually unchanged since that time. The pumps are suitable as a slurry pump or for small dewatering. This caffini libellula diaphragm pump is equipped with a Hatz diesel engine mounted in a mobile frame. Can be supplied with any desired coupling/connection. Max: 20 m³ per hour Max: 15 mWK 4 pcs. in stock If you have any questions, you can of course always contact us., , Throughput capacity: 20 m3/h, Max dirt passage: 50 mm, Motor brand: Hatz, Max. head: 15 MWK, Weight: 150 kg, , = More information =, , Year of manufacture: 2025, Colour: Blue, Applicable material: Water, Empty weight: 150 kg, Cargo space capacity: 335 l, Technical condition: very good, Visual appearance: very good, Price: On reques ...

Angle system – window machine Weinig Unicontrol Type: UC 5P Year of Make: 1992 with PLC control Operation on the machine Incl. window tool make GOLD IV 78 with and without rain rail Good, ready-to-use condition. Demonstration – trial run possible.

Working width: 900mm, max. workpiece height: 100mm, sanding units: 1, sanding belt dimensions X/Y: 2620mm/1150mm, feed speed: 2m/min-14m/min, compressed air requirement: 1800m³/h, operating pressure: 5bar-7bar, weight: approx. 1800kg. The feed belt is no longer grippy. Documentation available. On-site inspection is possible.

A Willems welding machine for plastics is available. Tables: 2, welding area: 500mm/400mm, pressing force: 20kN, frequency: 27.12MHz, generator output: 10kW, overhauled in 2007, documentation available. On-site inspection is possible.

Three welding machines are available. (1) Castolin+Eutectic CASTOWIG 150 G, power supply: 5A/10V to 150A/16V, max. short-circuit current: 0.15kA, weight: 50kg. (2) MIG O MAT WIGSTAR 250i, welding current: 10-250A, duty cycle: 100% at 160A, 60% at 200A. (3) Lorch SEW 200N, voltage: 400V, welding current: 230A, cooling: gas-cooled. (4) Heberle stud welding systems cd System 2010, connected load: 0.6kVA. On-site inspection is possible.

Eillert flume washer,, More information soon., Have a look at the photos and videos

Three almost identical CNC plastic pipe butt welding machines (mirror welding machines) Hürner are available. Years of construction: 2x 2016 and 1x 2018, working range OD: 40mm-160mm, power: 2.85kW, reduction inserts: 40/50/63/75/90/110/125/140, weight: approx. 80kg. Documentation available. On-site inspection is possible.

Five KLN and Rudholzer welding and hot riveting machines are available. 1/2) KLN WNA-W, year of construction: 2012/13, power: 11kW, frequency: 25kHz, machine dimensions X/Y/Z: approx. 2700mm/2000mm/2500mm, control: Siemens Simatic S7. 3/4/5) Rudholzer hot riveting machine, year of manufacture: 2016, control system: Siemens PLC. On-site inspection is possible.

max. width of grinding wheel: 50 mm ratio: 0 max. dia. of grinding wheel: 400 mm total power requirement: 3 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: m Pre-Dressing Device for Gear Grinding Wheels The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length of reeling-pattern: 0 internal dia. of stator: 0 packet hight: 0 mm wire dia.: 2,5 mm working area: 45 x 1650 mm total power requirement: 5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 900 mm table load: 2000 Kg weight of the machine ca.: 0,24 t dimensions: 1,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1200 mm width: 600 mm height over floor: 860 mm table load capacity: 250 Kg dimensions: 1200 x 600 x 400 m weight: 49 kg Workbench with 4 drawers and solid wood worktop Dimensions of the large drawer (WxDxH) 940 x 400 x 80 mm Dimensions of the small drawer (WxDxH) 460 x 400 x 80 mm Dimensions of the small drawer (WxDxH) 465 x 395 x 440 mm Height adjustment max. 30 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1560 mm width: 760 mm height over floor: 880 - 920 mm weight: 70 Kg Workbench with drawer block Dimensions of the entire drawer unit 66 x 40 x 35 cm. Dimensions of the individual drawers 59 x 35 x 4 cm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2900 mm table width: 1400 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,9 t dimensions: 2,9 x 1,4 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1400 mm table width: 1400 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,5 t dimensions: 1,4 x 1,4 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,45 t dimensions: 2,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1150 mm width: 610 mm height over floor: 910 mm table load capacity: max. 450 Kg dimensions: 1170 x 640 x 135 m weight: 47 kg Total dimensions including back panel 115 x 61 x 140 cm. Internal dimensions of the top 2 drawers 44 x 40 x 9 cm. Inner dimensions of the lower drawer 92 x 40 x 9 cm. Lower shelf dimensions 115 x 65 cm. Dimensions of the tool board with holes for hooks 115 x 50 cm. LED fluorescent beam width 50 mm. Power of the LED fluorescent tube 9 watts. ( IP20 ) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,64 t dimensions: 2,4 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional Surcharge for 25mm material thickness: 340, -EUR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,19 t dimensions: 1,2 x 0,8 x 0,85 m Siegmund workstation including 2 drawers Premium Light, through hardened tool steel X8.7, plasma nitrided and BAR coated. Drilling Ø 28 mm, drilling surface 100x100 mm grid. Material thickness approx. 15 mm With the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop! Consisting of: 1x 004002 (Siegmund Workstation) 1x 804004.X7 (perforated plate) 1x 284030 (clamp holder) 1x 004020 (shelf) 1x 284035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) Spacer ring 800653.N is required for clamping with  ...

number: 32 Positionen weight: 35 kg Basic set 2 / 32 pieces for table top thickness 15 and 25 mm 6 pieces screw clamps 12 pieces quick clamping bolts 2 pieces universal stop 100 mm 4 pieces universal stop 150 mm 2 pieces universal stop 225 mm 2 pieces stop and clamping angle 175 mm 1 piece hole brush 300 mm 1 piece burner holder 1 piece non-stick spray 500 ml, natural, biologically based 1 piece welding table cleaner 500 ml, natural, biologically based The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,18 t dimensions: 1,2 x 0,8 x 0,85 m Special offer ! Siegmund Workstation incl. 2 drawers + tool set B Through hardened tool steel, bore Ø 16 mm Holes surface 50x50 mm grid, material thickness approx. 11.5 - 13 mm. Consisting of: 1x 004002 (Siegmund Workstation) 1x 164004.X07 (perforated plate) 1x 164030 (clamp holder) 1x 004020 (shelf) 1x 164035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) 4x 160620 (clamp) 8x 160511 (double quick release bolts without groove) 6x 160412 (stop) 2x 160108.N (angle) 1x 160852 (Allen key) 1x 164301 (vice) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,32 t dimensions: 1,2 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 t stroke: 180 mm daylight between the columns: 540 x 100 mm dayligth: max. 990 mm : 72 mm diameter of piston: 48 mm weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,8 x 0,7 x 1,8 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t stroke: 180 mm daylight between the columns: 335 x 115 mm dayligth: max. 340 mm : 56 mm diameter of piston: 40 mm weight of the machine ca.: 0,05 t dimensions of the machine ca.: 0,75 x 0,53 x 1,6 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - 2 press documents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2900 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,77 t dimensions: 2,9 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1200 mm width: 600 mm height over floor: 860 mm table load capacity: Kg dimensions: 1200 x 600 x 400 m weight: 49 kg Workbench with 5 drawers and solid wood worktop Dimensions 1200 x 600 x 870mm Drawer dimensions (internal) 430 x 400 x 110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,26 t dimensions: 1,2 x 0,8 x 0,85 m Special offer ! Siegmund workstation incl. 2 drawers + tool set B high quality steel S355J2 + N, plasma nitrided and BAR-coated Boreholes Ø 22 mm, boreholes surface 100x100 mm grid Material thickness approx. 17 - 19 mm Consisting of: 1x 004002 (Siegmund Workstation) 1x 224004.P (perforated plate) 1x 224030 (clamp holder) 1x 004020 (shelf) 1x 224035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) 4x 220610.1 (clamp) 8x 220511 (double quick release bolts without groove) 6x 220410.N (stop) 2x 220110.N (angle) 1x 220852 (Allen key) 1x 004303 (vice) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wire guide elements for metal, spacing 100-200 mm, 15 mm longer Using these wire guide elements reduces the diameter of the workpieces that can be machined. Suitable for Vollmer machine types: QWD 76 P / QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500

A textile cutting and winding system consisting of several individual machines is available. The machine sews tubular bales together, cuts and rolls them into large rolls (bobbins). Working width for elastic/non-elastic fabrics: 1860mm/2400mm, shear width: 980mm, production capacity: 200kg/h, tubular bale weight: approx. 30kg, large roll weight range: 300kg-500kg, roll width: 1780mm, roll width: 2700mm, current fabric web width: 1700mm, total system dimensions X/Y/Z: approx. 5200mm/4000mm/5200mm, total system weight: approx. 3000kg. On-site inspection is possible.

Load capacity: 5600kg, loading volume: 12m³/12000l, top speed: 25km/h, number of augers: 1, tire size: 315/60 R22.5, tire tread depth: 10mm, weighing system: scales, feed discharge: front left, corrosion: visible. Documentation available. On-site inspection is possible.

A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible.

Automatic side sealing machine for shrinkwrapping packaging. Suitable for very large/wide products. Ideal to be combined with SHRINKtunnel-POF-Xtra Wide. Suitable for fully automated inline production. Automatic and manual infeed possible. - Specifications: max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions: unlimited length, W+H

Fully automatic L-sealer, PRO version, for shrink wrapping packaging. Automatic infeed and outfeed of product. - Technical specifications: 220V, 2.5kW | 6Bar / 0,1m?/min | max. speed of the machine in neutral: 30 cycles/minute | max. product dimensions (mm): L(100-450)xW(60-350)xH(5-120) | machine dimensions (mm): L1790xW845xH1550 | weight (net/gross): 350/450kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Automatic side sealing machine for shrinkwrapping packaging. Ideal to be combined with SHRINKtunnel-POF-L. Suitable for fully automated inline production. Automatic and manual infeed possible. - Specifications: max. speed of the machine in neutral: 35 cycles/minute | max. product dimensions: unlimited length, 300mm width, 150mm height | weight (net/gross): 400/500kg | power: 220V, 2kW | air: 5.5 bar/0.1m?/min | L1680xW960xH1500mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Fully automatic L-sealer for shrink wrapping packaging. Ideal to be combined with SHRINKtunnel-POF-L. Automatic infeed and outfeed of product. - Technical specifications: 220V, 2.5kW | 5.5 bar / 0,1m?/min | max. speed of the machine in neutral: 30 cycles/minute | max. product dimensions (mm): L450xW350xH130 | machine dimensions (mm): L1700xW960xH1400 | weight (net/gross): 290/420kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

L-Sealer for shrink wrap packaging, PRO version with strong sealing bar for continously precise packaging results. For larger sized product sizes, semi-automatic (manual infeed of product, automatic outfeed). Suitable to be combined with AMTEC SHRINKtunnel-POF-XXL PRO-Version - Technical specifications: 220V, 7kW | compressed air not necessary | max. speed of the machine in neutral: 20 cycles/minute | max. product dimensions (mm): L(100-850)xW(100-650)xH(2-280) | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions (mm): L2410xW1095xH1515 | weight (net/gross): 200-250kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automati ...

L-Sealer for shrink wrap packaging, for extremely large sized product, semi-automatic (manual infeed of product, automatic outfeed) with manually operated closing mechanism of L-bar sealer (no compressed air required). Suitable to be combined with AMTEC SHRINKtunnel-POF-XTRA (for very large/wide products). - Technical specifications: 220V, 4.0kW | max. speed of the machine in neutral: 15 cycles/minute | max. product dimensions (mm): L1150xW870xH350 (sealing blade length: L1200xW900mm) | max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table | machine dimensions: L2840xW1560xH1310mm | weight (net/gross): 350/400kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging t ...