w 350 used for sale

Capacity in X (usefull): 5.250 mm Capacity in Y (usefull): 1.350 mm Capacity in Z : 100 mm Routers: 1 Main routing motor: 7,5 kW, spindle: HSK F63, C-axis Toolchanger with 12 places Vertical drills: 11 in X-direction, 11 in Y-direction Horizontal drills in X : 6 Horizontal drills in Y : 2 Machine table: 10 Supports with vacuum cups Software: Woodwop 4.0

- Flat steel shear cuts flat up to 100 x 18 mm - Knife length approx. 250 mm - Profile steel scissors cut angles 90° to 100 x 10 mm 45° to 70 x 8 mm - Bar steel shear cuts round steel 90° to 36 mm Square steel 90° to 30 mm - Notching device sheets up to 8 mm - Hole punch - Pressure capacity approx. 50 t - Projection 350 mm - punched in steel up to 20 mm Ø in 15 mm - Drive 400 V / 3 kW - Space requirement approx. W 1100 x H 1700 x D 2300 mm - Weight approx. 1900 kg

internal diameter: 20/300 mm grinding depth: 250 mm swing diameter: 250 mm workpiece spindle - bore: 45 mm workpiece spindle swivable +/-: 25 ° taper setting angle of the workpiece column: 50 ° work piece spindle speed: 42 - 400 U/min grinding spindle speed: 10.000 U/min table speed -stepless-: 0,1 - 8 m/min grinding spindle drive: 4 kW power capacity: 10 kW weight of the machine ca.: 4.500 kg dimensions of the machine ca.: m : : : : : Internal grinding Æ, min./max. 20 / 300 mm Grinding depth 500 mm Table stroke, min./max. 5 / 800 mm Height of centres above table 250 mm Swing Æ in the table recess 600 mm Workspindle bore 62 / 45 mm Swivability of workpiece wheelhead 25 ° Max. taper angle which can be ground 50 ° Infeed, per stroke 0.0025 - 0.5 mm Worksp ...

pressure: 160 t no. of strokes: 40 - 120 Hub/min sheet width: mm total power requirement: 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. 8-track slide bearing guide. Automatic oil-circulation lubr ...

turning diameter over bed: 1070 mm turning diameter over slide rest: 710 mm turning length: 11000 mm Control: Siemens type: 840 D bed width: 710 mm transmission ratio: 2 turning speeds: 3,55-710 U/min diameter of quill: 200 mm quill stroke: 350 mm spindle passage: 128 mm chip conveyor: faceplate: 1000 mm steady: 500 mm steady: 500 mm steady: 500 mm offen steady: 500 mm offen steady: 800 mm offen steady: 800 mm offen roll stand: 2 St main drive motor: 71 kW total power requirement: kW weight of the machine ca.: 27 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impact length: 2000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 73 kg length in width: 620 mm length in total: 2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor length: 2000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 55 kg length in width: 620 mm length in total: 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 32 - 50mm der Buchsen length: 350 mm groove width: 10 - 12 - 14 mm weight: 20 kg dimensions: 400 x 150 x 250 mm Groove widths: 10 - 12 - 14mm Diameter of the guide bushes: 32 - 34 - 35 - 36 - 38 - 40 - 42 - 44 - 45 - 46 - 48 - 50mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor length: 6000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 160 kg length in width: 620 mm length in total: 6000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impact length: 6000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 195 kg length in width: 620 mm length in total: 6400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impact length: 3000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 117 kg length in width: 620 mm length in total: 3400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor length: 3000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 95 kg length in width: 620 mm length in total: 3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor length: 5000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 140 kg length in width: 620 mm length in total: 5000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor length: 4000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 110 kg length in width: 620 mm length in total: 4000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impact length: 4000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 137 kg length in width: 620 mm length in total: 4400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impact length: 5000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 172 kg length in width: 620 mm length in total: 5400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bohrleistung in Stahl (-Ø: 35 mm throat: 1000 mm workpiece height max.: 200 - 1400 mm height adjustment: 745 mm base plate surface area: 1200 x 930 mm Bohrspindel-Ø/ Aufnahme: 90 mm / MK 4 bore spindle stroke: 350 mm turning speed range: 60 - 1850 U/min feed range: 0,09 - 1 mm/U power capacity: 3,7 kW weight of the machine ca.: 3,7 t dimensions of the machine ca.: 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wittmann Battenfeld Injection Moulding Machine Here we offer you a SmartPower 210/1330 Thermoset machine. Wittmann Battenfeld injection moulding machine with UNILOG B8 control system Plant was serviced by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 / checked and brought up to date As part of the complete review, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already normally existing pressure switches, the system consists of the possibility to install additional internal mold pressure switches 2 pieces Kistler module for mold internal pressure switching range 1: 20,000 pC, range 2: 10,000 pC). The parts for the upgrade mold internal pressure switches are part of the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: ...

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 10 mm max. module: 0.5 Workpiece length max.: 35 mm max. gear wheel width: 15 mm Pitch min.: 6 max.: 180 Axes distance between work- piece and tool: min.: 0 mm max: 28 mm Gear hob: max. diameter: 24 mm Milling cutter speeds: number (steps): 6 from: 850 rpm up to: 4500 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.32 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 630 mm Width: 530 mm Height: 1350 mm

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 10 mm max. module: 0.5 Workpiece length max.: 35 mm max. gear wheel width: 15 mm Pitch min.: 6 max.: 180 Axes distance between work- piece and tool: min.: 0 mm max: 28 mm Gear hob: max. diameter: 24 mm Milling cutter speeds: number (steps): 6 from: 850 rpm up to: 4500 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.32 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 630 mm Width: 530 mm Height: 1350 mm Various accessories: Loader Wahli Type: 38 W Lamp

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Drill capacity in steel: 12 mm Table length: 350 mm Table width: 280 mm Depth of throat: 200 mm Spindle stroke: 100 mm Spindle speeds: stepless from: 400 rpm up to: 6000 rpm Distance from table to spindle nose: max: 400 mm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 900 mm Width: 650 mm Height: 1850 mm Various accessories: Drill chuck Lamp Cast-iron base

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 45 mm max. module: 1.00 max. gear wheel width: 45 mm Pitch min.: 6 max.: 180 Milling cutter speeds: number (steps): 8 from: 900 rpm up to: 4000 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.50 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 600 mm Width: 500 mm Height: 1300 mm Various accessories: Coolant system Dividing plates

Extraction unit for filler station or preparation station: Make : Wolf Year of construction : 2009 Dimensions : 1.5 m x 1.5 m x 1.5 m (approx. WxLxH) Volume flow : 19,000 or 9,500 m3/h, 1895 or 948 1/min; 7.5 or 2.0 kW Pipelines : optional exhaust air pipes and deflector hood. Electrics : Control cabinet Location : Warehouse Area Nuremberg Retail price : € 3.350,- net ex location

Wheel diameter: 200 mm Cutting height: 80 mm cutting width: 180 mm Motor output: 350 W Table dimensions: mm Table tiltable: 45 Grad saw band length: 1400 x 6,5 x 0,35 mm machine weight ab.: 12 kg Dimensions (L/W/H): 700 x 600 x 700 mm Wood band saw with extendable and swiveling saw table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 400 mm Cutting height: 200 mm cutting width: 350 mm Motor output: 1,5 kW Table dimensions: 400 x 500 mm Table tiltable: 45 Grad saw band length: 2950 mm machine weight ab.: 150 kg Dimensions (L/W/H): 700 x 600 x 1800 mm wood band saw Thanks to the heavy cast-iron table, the wood band saw offers good stability. The machine has a longitudinal guide and a miter guide and is supplied with a saw band. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2-way geared in-line drilling machine make WEBO type Varia 20Fabr. -No: 20/14/1 and 20/13/6Technical specifications:Drilling capacity approx. 30 mmSpindle mount: MK 330 spindle speeds: 103 - 1450 rpmDistance spindle nose table: 100 - 600 mmProjection: 260 mmSpindle stroke: 150 mmFeeds: 0.1 - 0.3 mm / rev:Table size with / without channel: 100 x 500/800 x 350 mmT-slots in the table: 18 mmExternal dimensions L x W x H: 1000 x 900 x 2600 mmWeight approx: 1800 kgWith- Right-left run- Table height adjustable via crank- Drill heads height adjustable via crankused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Heavy 4-fold geared in-line drilling machine make WMW Saalfeld type BKR 20 x 4 AIFabr. -No: 08712-15Technical specifications:Drilling capacity in steel: 25 - 30 mmSpindle mount: MK 38 spindle speeds: 180 - 2000 rpm.4 automatic feeds: 0.08 - 0.32 mm / revQuill stroke: 140 mmTable size: 1800 x 350 mmProjection: 275 mmDrive power: 2 kWtotal connected load: 8 kWDimensions L x W x H: 2350 x 920 x 2350 mmWeight approx: 2480 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Trough trowal vibrator manufactured by WALTHER TROWAL type V 65Technical specifications:Inside trough size: 500 x 400 x 350 mmTrough opening: 500 x 220 mmExternal dimensions approx: 2000 x 1000 x 1230 mmWith- adjustable water supply (pump)- Trough opening tap for removalused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

2-column screw press make probably WMWTechnical specifications:Pressing force approx.: 10 t (estimated)Handwheel diameter: 800 mmProjection between the uprights: 400 mmTable size: 350 x 440 mmHole in the table Drm. : 100 mmRam: 130 x 110 mmInstallation height: 300 mmExternal dimensions L x W x H: 900 x 500 x 1780 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

turning diameter over bed: 280 mm turning diameter over slide rest: 155 mm turning diameter in the gap: 350 mm turning length: 800 mm turning speeds: 26 - 2000 U/min spindle bore: 24 mm connected load: 1,6 kW weight of the machine ca.: 0,7 t dimensions: 1,55 x 0,8 x 1,3 m Center lathe with - digital display - 4-jaw chuck Röhm 250mm - Multifix steel holder - follow along. Bezel - steady rest max. 135mm - Chip protection wall - Chip tray - coolant system - machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter: 570 mm Turning length: 1000 mm Turret positions: 1 CNC Brand: Siemens CNC Model: SIEMENS 810D Swing over bed Ø 570 mm Swing over cross slide Ø 340 mm DBC Turning Length 1000 mm Bed width 350 mm Tailstock spindle Ø 80 Ø Spindle taper 5 Mk Workpiece weight 1300 Speeds / ranges 2500 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 5000 mm/min.

weight max.: 20 t workpiece diameter: 300 - 3600 mm Turning speed: 70 - 1200 mm/min roll diameter: 350 mm Wheel width: 110/175 mm total power requirement: 3 kW weight of the machine ca.: t dimensions of the machine ca.: 2,5 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with steel rolls, manual adjustable roller spacing, • one roller unit with twin drive with variable adjustable rotational speed, • one roller unit without drive. • CE-marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Four-sided planer WEINIG PROFIMAT 22N. No 4 –DTR – German production – year of manufacture 1988 – adjustable heads TECHNICAL PARAMETERS: planing width 220 mm planing height 120 mm spindle diameter 40 mm 1) bottom head 5.5 kW 2) head of the law 3) left head 7.5 kW 4) top head 7.5 kW feed engine 2.2 kW feed speed 6 – 20 m/min four steel top pulling rollers one upper rubber pulling roller one pulling roller in the countertop feed on cardan shafts electric height adjustment pre-table top length 1975 mm central lubrication pneumatic clamps dimensions of the machine (length / width / height) 350 / 200 / 170 cm weight ~ 1800 kg

Description: Very well preserved heavy-duty lathe, make Wohlenberg. The machine was partially overhauled in 2013! Details: Model PT1-1070II Year of construction 1989 partially overhauled in 2013 Country of origin Germany CNC control Siemens 840 D extended from 7 m to 11 m turning length Geometry Santer turret Turning diameter over bed 1,070 mm Turning diameter via support 710 mm Turning length 11,000 mm Bed width 710 mm 2 gear stages Speed 3.55 - 710 rpm. Quill diameter 200 mm Quill stroke 350 mm Spindle passage 128 mm Conveyor Drilling rig incl. boring bar length approx. Ø 200 x 2,430 mm Face plate 1,000 mm Bezel 4 quill 500 mm open Main drive motor 71 kW incl. documentation

WAHLI Multi 76 multi purpose lathe Mach. No. 227 Wahli Frères S.A. in Bévilard, Switzerland For turning and milling. Spindle head vertical adjustment. Center height 125 mm ( 70-230 mm) Distance between centers 550 mm Spindle speeds 50-3000 rpm. Travels Z/X - 350/100 mm Spindle diameter 16 mm Max. working diameter 100 mm Power: 2-speed 0.5/0.9 kW motor

grinding diameter: 200 mm grinding length: 500 mm centre height: - mm Control: total power requirement: 36 kW weight of the machine ca.: t dimensions of the machine ca.: m Grinding length approx. 500 mm Grinding diameter > 200 mm Grinding wheel diameter approx. 700 mm 30° bevel The basis is a Karstens grinding machine Equipment: Diameter measurement control and positionar KSS system and suction Information from our supplier: In very good condition for its age, after retrofit in 2014 only as a backup MASCHINE used. Purchase price EUR 350.000,- Machine with no defects and ready to use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MOBILE MIXER-MINCER, WOLFKING TYPE: SFG 150/100 + PORTIONER TYPE: PD200 Technical description: Material: Stainless Steel Mixer, type: SFG 150/100 Serial number: 59440, year: 1998 Power supply: 380 V, 50 Hz, 7.8 / 9 A, 3.7 / 4.4 kW Weight: 350 kg Outlet diameter: ?100 mm Mixer mill size: 1310 x 600 x 1500 mm Foot control Portioner, type: PD 200 Serial number: 59441, year: 1998 Power supply: 220 V, 50 Hz, 0,4 A, 35 kW Weight: 100 kg Band width: 200 mm Working width: 180 mm Dimensions: 1300 x 600 x 1140 mm

Machine type: Column drilling machine Make: WMW Heckert Type: BS 32 AI Control type: conventional Drilling capacity in steel (diameter): 32 mm Projection: 320 mm Drilling stroke: 200 mm Spindle mount MK: 4 Feed: 0.08.1.25 /9 step Speeds: 63 - 1,000 / 9 step rpm Headstock adjustment: 280 manual mm Table clamping surface: 530 x 450 mm Table adjustable: in height 350 mm Footprint: 490 x 440 mm Weight: 1.03 t

Description Waldrich Siegen CNC lathe for heavy machining Details Conversion to CNC 2006 Center distance 22,000 mm Maximum turning length Support 1: 20,000 mm Maximum turning length Support 2: 20,500 mm Largest turning diameter over support 1,600 mm Largest turning diameter above bed 2,000 mm Workpiece weight max. 70,000 kg Face plate diameter 2,000 mm Face plate speed, infinitely variable in 4 steps 1.2 - 75 rpm. Maximum torque at speed 5.65: 170,000 Nm Main motor 110 kW Largest clamping diameter on headstock ⌀ 920 mm Mounting in roller block (passable) 2 pieces 600 - 1290 mm Mounting in bezels (passable) 100 - 775 mm Control system Siemens SINUMERIK 840D Support 1 and 2 (to headstock) Displacement of the upper support 550 mm Displacement of the slider 400 mm Quick longitudinal adjustment (rapid traverse) 3,000 mm/min Q ...

Complete system for automatic Filling of products into cups/tubs SIEMENS PLC Control S7-300 With 2 cup formats: square and rectangular Filling capacity up to 4200 cups/hour Filling volume: 10-150 ml, manually adjustable With automatic lid attachment and closure Mold kit 1: for square plastic cups (tubs) Cup size: 92 x 92mm, lid size 96 x 96 mm, for different heights from 30 to 42 mm Content: approx. 100/ 125 ml Mold set 2: for rectangular plastic cups (tubs) Cup or tub size: 78 x 95 mm (W/L), height 28.8 mm Content: approx. 90 ml Output up to approx. 4200 units/hour / approx. 350 – 400 kg/hour

grinding diameter: A: 457,2 mm grinding diameter: I: 254 mm discsthickness: ca. 63 mm max. size of workpiece LxWxH: 1.000 x 150 x 150 mm weight of the machine: ca. 3.350 kg Lapping Machine | Peter Wolters - TFG 150 The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TFG150 | TFG-150 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Details Stock-No. 1105-0388994 Type of machine CNC Lathe Make WEILER Type 200 CNC Year of manufacture 1992 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis ex location, not dismanteled Technical details turning diameter 450 mm turning length 925 mm control SIEMENS 810 T center height over square guideway 245 mm turning length between centers 500 mm longitudinal bed slide 925 mm Cross travel of cross slide 250 mm swing diameter max. over bed cover 420 mm Swing over the cover of the tailstock slide guide 350 mm total power requirement 25 kW Additional information 12-FOLD REVOLVER SPINDLE 5000 RPM 19 KW POWER SPINDLE PASSAGE 42 MM

Special offer: Very Special Price for Quick Sale! 6 col W&H Olimpia central drum flexopress reel diam on unwinder and rewinder 1200 mm width 1100 mm if need we will check if more is possible repeat: 300-910 mm gas drying ceramic anilox: 4x200 l/cm, 2x120 l/cm, 2x80 l/cm printing sleeves: For polymers 2.84; For polymers 1.14; 1. 310 - pcs.70 1. 310 - pcs.6 2. 320 - pcs.60 2. 320 - pcs.3 3. 330-piece 9 3. 330-piece 10 4. 340 - pcs.12 4. 340 - pcs.5 5. 350 - pcs.5 5. 380 -pcs.6 6. 360 - pcs.3 7. 370-pc.14 8. 380 - item 5 9. 390 - pcs.6 10. 410 - item 5 11. 420-piece 6 12. 430-piece 6 13. 440-piece 16 14. 460-piece 26 15. 480-piece 6 16. 490 - pcs.4 17. 510-piece 6 18 520-pc.5 19. 540-piece 6 20. 550 - pcs.50 21. 560 - pcs.4 22. 570-piece 6 23. 580-piece 5 Fixed rollers instead of adapters; 1. fi 89.243 pcs.6 fi 105.159 pcs.6 3. fi 124.257p.6 4. fi 140 ...

Bench drill WMW BT10/1 Drilling capacity: 10 mm Projection: 210 mm Distance table to chuck: 210 - 4000 mm Table: 350 x 250 mm Spindle speed: 250, 355, 710, 1000, 1400, 2000, 2500 rpm Spindle stroke: 100 mm with foot switch for right and counterclockwise rotation !; Engine power: 0.7 kW 380 V used, tested ! Dimensions: 620 x 800 x 1950 mm

WINKWORTH type GU660 double spiral ribbon blade powder blender in stainless steel. Trough dimensions 700mm wide x 1750mm long x 800mm deep, gross capacity 888 litres. Approx working capacity 650 litres( approx 300 – 350 kg @ 0.5 S.G. 7.5kw 415v 3ph drive motor.

Weishaupt Dual Fuel Burner -mu Type WM-GL20/4-A with digital combustion manager WFM Version ZM-R-3LN (SuperLowNox) Power range (N-gas) 300 - 2450 kW Power range (EL) 350 - 2450 kW Fully automatic on the oil side and gas side in a sliding step or modulating depending on the type of power control. Control range on the gas side up to 1:8 possible. Control range on the oil side up to 1:5 possible. for the combustion of heating oil EL according to DIN 51603 and natural gas according to DIN DVGW worksheet with the following components: Burner housing Blower with three-phase motor Integrated speed module for controlling Frequency converter (included) Combustion air control with drive Fuel system best. made of high-pressure gear pump with Pressure regulating valve, electrosolenoid valves as Quick-closing device nozzle stock and nozzle Magnetic coupling for shutting off the oil ...

Webo Gradua 23 Precision Column Drilling Machine Drilling capacity in steel (diameter): 30 mm Projection: 330 mm Drilling stroke: 135 mm Operating voltage: 380 V Recording MK: 3 Speed: 90 - 2000 rpm. Feed rate: 0.1 - 0.3 m/min Workpiece height - max.: 600 mm Clamping surface: 450 x 350 mm Gear stages: 2 Distance spindle nose and table: 30 - 600 mm Column diameter: 200 mm Coolant device: available Weight: 0.8 t Total power requirement: 1.1 kW Right-left rotation, adjustable drill feed (0.1; 0.2; -0.3 mm/rev), height-adjustable, Work table, oil level indicator More items - new and used - can be found in our shop! International shipping costs on request!

Spindle brake with material passage WMW EBD I DC connection: 36 V DC Power consumption: 70 W torque increase: 1,1,5 drive speed reduction: 1.7 material passage: 40 mm Flange diameter: Ø 210 mm bolt circle diameter: Ø 192 mm, 4x bore: Ø 11 mm drive shaft (motor): Wedge hub profile 4 x 18 x 22 x 6 ( TGL 0-5471 ) Flange diameter ( motor ): Ø 120 mm bolt circle diameter ( motor ): Ø 90 mm, 4x bore: Ø 9 mm used, tested ! Dimensions: 350 x 210 x 194 mm

Fully automatic stretch film packaging machine Packing Plant / Wrapper Fabbri Group ELIXA 21 / B.283.XS Elixa 21 reaches a maximum speed of 21 packs per minute, making it one of the ideal solutions for use in stores. Like all the machines in the Elixa range, the Elixa 21 is an automatic, compact and reliable stretch wrapping machine designed by the Fabbri Group specifically for particularly small workspaces and for the back rooms of retail stores. Elixa 21 can pack all foods compatible with stretch film and technology, reaching a maximum speed of 21 packs per minute. Neutral or printed films with continuous printing are used, which offer more possibilities for communication and branding on the packaging. It delivers maximum results in combination with Fabbri Group stretch films, but also offers excellent performance with food films from all major manufacturers on the marke ...

- technically efficient, ready to work – after full service - disc diameter: 350 mm