w 350 used for sale

Wittmann W828-0342 X-axis dimension 1105 mm Y-axis dimensions 1400 mm Z axis dimension 3000 mm Lifting capacity 8 kg B-steering axles Servo drive

Wittmann W828-0341 X-axis dimension 1105 mm Y-axis dimensions 1200 mm Z axis dimension 2500 mm Lifting capacity 5 kg B-steering axles Servo drive

Wittmann W832-0672 X-axis dimension 900 mm Y-axis dimensions 1600 mm Z axis dimension 2000 mm Load capacity 20 kg Steering axles B and C Servo drive

Wittmann W828-0438 X-axis dimension 1105 mm Y-axis dimensions 1400 mm Z axis dimension 3000 mm Lifting capacity 8 kg B-steering axles Servo drive

Wittmann W828-0437 X-axis dimension 1105 mm Y-axis dimensions 1200 mm Z axis dimension 2500 mm Lifting capacity 8 kg B-steering axles Servo drive

Wittmann W828-0344 X-axis dimension 1105 mm Y-axis dimensions 1400 mm Z axis dimension 3000 mm Lifting capacity 8 kg B-steering axles Servo drive

Wittmann W828-0343 X-axis dimension 1105 mm Y-axis dimensions 1200 mm Z axis dimension 2500 mm Lifting capacity 8 kg B-steering axles Servo drive

Wittmann W828-0283 X-axis dimension 1100 mm Y-axis dimensions 1400 mm Z axis dimension 3000 mm Capacity 8 B-steering axles Servo drive

Wittmann W811-0766 X-axis dimension 620 mm Dimensions of the Y-axis 1000 mm Z axis dimension 1500 mm Capacity 5kg C-steering axles Servo drive

Wittmann W832-0578 X-axis dimension 900 mm Y-axis dimensions 1600 mm Z axis dimension 2000 mm Load capacity 20 kg Steering axles B and C SERVO drive

Wittmann W832-0549 X-axis dimension 900 mm Y-axis dimensions 1600 mm Z axis dimension 2000 mm Lift capacity 15 kg Steering axles B and C Servo drive

Wittmann W828-0296 X-axis dimension 1100 mm Y-axis dimensions 1400 mm Z axis dimension 3000 mm Lifting capacity 8 kg B-steering axles

X axis dimension 550 Y axis dimension 1200 Z axis dimension 2500 Other lifting capacity 10 Torsion axles c Drive servo

X axis dimension 1105 Y axis dimension 1200 Z axis dimension 2500 Other lifting capacity 5 Torsion axles B Drive servo

Double line for washing and disinfection - STEAM The lines consist of a tipper, inspection tables, washing machines and receiving tables. Water tanks 2x 500L Productivity: 50-1200kg/h

With Elin 55kW electric motor, 1480 rpm

The machine is fully functional, with a rich set of tools. Pipe bending tools: fi 83 - R300 fi 88.9 - R300 fi 101.6 - R250, R400 fi108 - R450 fi 114.3 - R550 fi 133 - R400 fi 137 - R500 fi 168 - R700 fi 193 - R600 fi 219 - R640, R800

It is a single-shaft batch mixer made by WAM in 2007, which was used for the production of hand washing paste.

This Wagner WPB 340 A Sawing machine was manufactured in the year 1993.

This WICKERT WKP 2000/5/5 Other (IMM) machine was manufactured in the year 1993 in Germany. It is equipped with a Siemens PLC S5-100 U control unit. The machine disposes of a display control OP 396, an upper hydraulic lifting unit, a heating rod group monitoring, an automatic discharge device for FT1, an extended protective grid system and an additional tool temperature display.

This WICKERT WKP 2560/5/5 was manufactured in 1996 in Germany. It is equipped with Siemens PLC control S5. This machine has a pressure capacity of 2560kN. Its pressing area is 500x500mm. It has a piston stroke of 500mm and a piston diameter of 290mm. Contact us anytime for further information.

Tailstock stroke max. 130 mm Specifications: Turning diameter max. 360 mm Turning diameter over support 180 mm X-axis travel 230 mm Z-axis travel 620 mm Control SINUMERIK 828 D Spindle bore 40 mm Weight approx. 1600 kg Dimensions (LxWxH) approx. 2510x1670x2050 mm Year of construction 2014

Overview This can filler was built in 2018 by American manufacturer Wild Goose. The machine is already dismantled, in storage and can be viewed in person. Techn. Details Capacity: 50 cans/ min Formats that can be processed: 150ml 250ml 330ml 440ml 500ml Can lid: 202 and 200 CDL end spec Dimensions (Floor): 2,000mm x 1,000mm

X-axis: 55mm, B-axis: 137°, C-axis: 360mm, with robot, part recognition, pallet changer, measuring control, grinding wheels, rams and dressing pots, an inspection is possible.

curved conveyor belt bend 90? width carpet 500 mm total width 700 mm min/max height 890/990 mm length inner size 2800 mm engine 0.55 kW

Working width: 2000mm, max. roll diameter: 800mm, length: 2700mm, width: 1250mm, height: 2050mm, weight: 250kg, with documentation, light table for transmitted light, light from above, winding and unwinding, side shift during winding, winding speed adjustable and counter, an on-site inspection is possible, has been regularly serviced, no videos available.

Volume flow: 3000m³/h, coolant capacity: 20kg, coolant output: 43.8kW, weight: 1.27t.

Mixer for the soap industry. Volume: 1063l, dimensions X/Y/Z with frame: approx. 3000mm/2800mm/2800mm, weight with frame: approx. 3000kg, weight without frame: approx. 2000kg. On-site inspection is possible.

Wartsila 3.9 MW/50Hz Gas Generating Set 12V34SG with CHP Auxiliaries This power plant was built by Wartsila in end of year 2010 and it was commissioned in 2011 as a turn-key project with heat recovery system for 10 bar steam production. Fuel used in this plant was normal natural gas fed from a local pipeline. The plant was operated till 2021 having total operating hours 43’767 till shutting down. Complete plant with step up transformer, lube oil system, control panels, and synchronizer panel, USP systems, operating monitors, MCC, start system and air compressors, HRCS for 10 bar steam, exhaust system, 6 kV Vacuum breaker with synchronisation, manuals and drawings. Plant is still installed, and electric power is still connected to all devices. Wartsila Service has made all scheduled services for this engine, last 40’000-hour service just 3000-hour prior operation closing in 2021.  ...

Description Sprue Taker Manipulator X axis: 100 mm Y axis: 700 mm Z axis: 45°- 90° Engines: no - Pneumatic axles Gripper rotation: Yes together with Z axis Clamp tipping: No Sprue clamp: Yes Voids: 1 Gripper control: Yes Euromap 12

total power requirement:0,2 kW weight of the machine ca.:30 kg dimensions of the machine ca.:0,4 x 0,3 x 0,3 m

pressure:160 t throat:360 mm stroke:500 mm Documents:vorhanden

Equipped with 24-way tool change magazine; including cooling and filter installation

Equipped with 24-way tool change magazine; including cooling and filter installation

With accessories

Equipped with 24-way tool change magazine; including cooling and filter installation

amount: 107 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Connector, plug, sensor module -Manufacturer: Wago, connector Winsta ECBT2 25 pieces -Connector: Wago 3-pin with strain relief housing -Quantity: 6x box with 25 pieces available -Price: per box -Dimensions box: 200/185/H55 mm -Weight: 0.6 kg/carton

Description: Additional information: Shaft vice + prism, - ideal for drilling and simple milling work, - can be used in horizontal and vertical positions, - V-block and jaw inserts hardened and ground, robust cast iron design, technical details: jaw width 110 mm, quantity 1 piece Approx. Onsite Dimension. (l x w x h): 250 x 200 x 180 mm, weight approx.: 30 kg

USED WAGNER WMC 1400, PRODUCED IN 2013, IN A VERY GOOD CONDITION, UNDER POWER. SPECS: - max. X/Y/Z axis travels: 1400/700/600 - work table dimensions: 1550 mm x 700 mm - max. workpiece weight: 1000 kg - max. spindle speed: 8000 rpm - control: Siemens Sinumerik 828 D. machine still in use.

Description: Bench drill CE-tested spindle hood. Keyless chuck (1 to 16 mm) Tilting work table. Depth stop. Drilling capacity in steel 20 mm Projection 180 mm Drilling stroke 82 mm Speed 220-2840 rpm Table 290 x 290 mm Total power requirement 0.55 / 0.75 kW / volt Machine weight approx. 54 kg Dimensions L x W x H 820 x 500 x 290 mm Approx. Onsite Dimension. (l x w x h): 820 x 500 x 290 mm, weight approx.: 54 kg

Description: Aluminum saw Saw blade 300mm Double miter +45 / -60 degrees 2 speeds 1500/3000 rpm see pictures weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 800 x 600 x 1,500 mm

Description: mobile machine base Adjustable support surface: Minimum dimensions: 470 x 590 mm Maximum dimensions 740 x 860 mm 4 wheels, including 2 swivel castors with locking device for secure locking of the frame Load capacity 600 kg Wheel diameter 75 mm Weight 15 kg Dimensions L x W x H 700 x 400 x 150mm Approx. Onsite Dimension. (l x w x h): 700 x 400 x 150 mm, weight approx.: 15 kg

Description: Mobile tool trolley, scope of delivery: Workbench with wooden worktop 2 x 125 mm. Heavy duty castors with brakes. 2 x 125 mm. Heavy fixed roles. 1 x robust handle made of solid steel. 1 x 2 buttons. Very nice solid wood panel. Solid ball bearing guides. (Double bearing) The drawer can be opened 100% Dimensions of the drawer 108 x 410 x 14 cm. Load capacity of the drawer 30Kg. Dimensions of the doors 520 x 460mm Dimensions L-W-H 1250 x 535 x 845 mm Weight 74 kg Number of drawers 1 pc. Approx. Onsite Dimension. (l x w x h): 1,250 x 535 x 845 mm, weight approx.: 74 kg

Description: Workshop trolley with 20 pcs. Drawers and 40mm solid wood panel Fixed ball bearing guides (double bearings), anti-slip mat in each compartment, Thick rubber top mat, central locking, 6 heavy duty wheels 125 mm. including 4 swivel castors with brakes, central locking for all drawers. Anti-slip mat in each compartment. Solid ball bearing guides for the drawers. (Double stored) All drawers can be opened 100%. Approx. Onsite Dimension. (l x w x h): 1,610 x 460 x 920 mm, weight approx.: 93,5 kg

Description: Professional tool cart / workbench Included as standard. 4 x 150 mm. Heavy duty rollers of 2 with brake. 2 x Robust solid steel handle. 2 x separate locks for drawers and doors. 9 x compartment divider in the top drawer. (18 compartments can be created with it become) 4 x tray blue in the right second drawer. Door with magnetic closure. Anti-slip mat in each compartment. Very nice solid wood panel. Fixed ball bearing guides. (Double bearing) All drawers can be opened 100%. Dimensions including wheels and handgrips 170 x 48.5 x 95 cm. Total dimensions without wheels and handles 152 x 48.5 x 76 cm. Internal dimensions of the upper drawer 1390 x 360 x 60 mm. Interior dimensions of the right second la 910 x 380 x 90 cm. Internal dimensions of the left 2nd, 3rd and 4th la 440 x 380 x 90 mm. Interior dimensions of the left fifth la 440 x 380 x 210 mm. Interior dimensions of the sh ...

Description: Professional tool trolley / workbench with wooden top Inside dimensions of the top left 3 drawers 395 x 395 x 65 mm. Inner dimensions of the middle upper 3 drawers 815 x 395 x 65 mm. Inner dimensions of the top right 3 drawers 395 x 395 x 65 mm. Inside dimensions of the 4th drawer on the left 395 x 395 x 140 mm. Inner dimensions of the middle 4th drawer 815 x 395 x 140 mm. Inside dimensions of the 4th right drawer 395 x 395 x 140 mm. Inner dimensions of the left 5th la 395 x 395 x 220 mm. Inner dimensions of the middle 5th drawer 815 x 395 x 220 mm. Inner dimensions of the right 5th la 395 x 395 x 220 mm. Dimensions of the wheels 150 x 40 mm. Solid wood panel thickness 40 mm. Package dimensions 189 x 55 x 80 cm. Weight 170 kg. The HBM 182 is supplied as standard with: 2 x 150 mm. High-performance swivel castor with brake. 2 x 150 mm. High performance steering wheel. 2 x robu ...

Description: Tool trolley: Equipped with 4 heavy duty casters, two with brake. Heavy duty wheels 150 x 40 mm. All drawers are equipped with anti-slip mats. Equipped with 2 robust stainless steel handles. A lock for the door and 1 lock for all drawers. Solid wood panel, 4 cm thick. Solid ball bearing guides (double bearings) for the drawers. 10 drawers, 12 storage bins, 13 hooks. Dimensions L B H 2300 x510 x 1500 mm Weight 145 kg Number of drawers 20 St. Approx. Onsite Dimension. (l x w x h): 2,300 x 600 x 1,500 mm, weight approx.: 150 kg

Description: Professional workbench / tool trolley Dimensions of the upper drawers 1240 x 400 x 100mm. Middle drawer dimensions 770 x 400 x 60mm. Cabinet dimensions 500 x 420 x 540mm Dimensions of the tool wall 1050 x 610mm. Dimensions of the wall cupboards 2 pcs. 680 x 280 x 350mm. 4 rolls of 125 x 50 mm each. 4 x hanging storage containers of 10.5 x 14 x 7.5 cm. 3 x hanging storage containers of 14 x 22 x 12 cm. 2 x steel containers of 33 x 10 x 10 cm. 2 x U-hooks 55 x 25 x 6 mm. for tool wall. 4 x double hooks 85 x 6 mm for tool wall. 2 x universal hanging frame 37 cm. Wide. 2 x hanging racks for socket wrenches. Approx. Onsite Dimension. (l x w x h): 1,360 x 500 x 1,970 mm, weight approx.: 115 kg

Description: Tool trolley Equipped with 4 high-performance castors, 2pcs. with brake. Heavy duty wheels 125 x 40 mm. All drawers are equipped with anti-slip mats. Equipped with 2 robust stainless steel handles. All cupboards and drawers can be locked individually. Solid wood panel 4 cm thick. Fixed ball bearing guides. The lower drawer has a double ladder. Solid ball bearing guides (double bearings) for the drawers 4 drawers 3 pieces of cupboards with lockable doors. CAUTION! Version in black. Dimensions L-W-H 1380 x 610 x 180 mm Weight 139 kg Number of drawers 4 pieces Package size max. 1280 x 680 x 80 cm Approx. Onsite Dimension. (l x w x h): 1,280 x 680 x 800 mm, weight approx.: 140 kg