w 350 used for sale

Cream Separator for milk, whey and dairy products MANUFACTURER: GEA Westfalia TYPE: MSF 400-01-777 CAPACITY: 50.000 Liter per hour MACHINE COMES WITH: Water control valves, motor 60 kW, motor cover, discharge tank, Fristam discharge pump, service tools, toolbox and instructions book. APPLICATION: Cream fat separation from milk, cream fat separation from whey, skimming, standardization for dairy products. PRICE: Please ask Westfalia MSE 500 cream separator, westfalia mse 350 cream separator, westfalia mse 200 cream separtor, westfalia msd 200 cream separator, westfalia msd 250 cream separator, westfalia mse 400 cream separator, westfalia mse 500 cream separator, gea westfalia cream separator

Weinig Hydromat 23 four-sided planer 60m/min Working width 230mm Working height 160mm Number of spindles 5 Spindle layout: 1.Lower 15kw 2.11kw rights 3.Left 11kw 4.Upper 15kw 5.Lower 7.5kw Spindle speed 6000r.p.m Spindle Diameter 50mm 3 pulling rollers in the working table Inverter-adjustable feed speed up to 60m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation Machine dimensions 300x180x170cmH Weight 3500kg Net price 130.000PLN

amplification -fold: 30 spindle taper ISO: 40 spindle taper:: M16 / DIN 2080 voltage: 6 V Packing: 0,430,25010 m Shipping weight: 4 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A conventional precision lathe Weiler is available. Distance between centers: 650mm, center height: 160mm, swing diameter over bed/faceplate: 320mm/190mm, spindle bore: 43mm, speed: 2500rpm, quill diameter: 40mm, quill travel: 85mm. Machine dimensions X/Y/Z: approx. 1800mm/900mm/1600mm, weight: approx. 1050kg. An on-site inspection is possible.

Dimensions (L/W/H): 2100x920x2250 mm Weight: 410 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2260x920x2250 mm Weight: 450 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3200x1000x2300 mm Weight: 630 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 250 mm material thickness: 2 mm diameter: 1200 mm total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Separator WESTFALIA SB 80-47-076 Features: Material V2A (AISI 304) 1.4301 Year of manufacture 1976

Features: Length 2500 mm Width 1550 mm Total height 1000 mm Description Decanter WESTFALIA Type SDA 360L for fruit juices, wine, vegetable juices, tea, coffee, citrus, tropical fruits for pectin, mash and sewage sludge Swallowing capacity approx. 10,000 litres depending on the product Type SDA 360L M.Nr.1635 124 Drum speed: 4000 rpm Solids: 1.35 kg/dm3 Dimensions and weight: Instruction manual available!

Features: Total height 1600 mm Length 2600 mm Width 1900 mm Description: M.Nr.: 1699 334 Drum speed: 3,700 rpm Solids: 3.5 kg/dm3 Engine data: Type: 180 M-4/2; 380V; 35/46 Amp.; 16.5/22 kW; 50 Hz. Dimensions decanter: Length: 2,600 mm Width: 1,000 mm Height: 1,600 mm Pump dimensions: Length: 1,900 mm Width: 950 mm Height: 830 mm

This SiteLight 2G package includes a complete set of 96 new, previously unused LED mesh modules , including packaging. The modules originate from a uniform SiteLight setup and are based on the 2G generation with LED mesh technology. They were originally designed for use as a media façade and construction site communication solution †for example when mounted on façades, scaffold tubes, or high-rise formwork in combination with protection screens such as Xbright. This makes them particularly suitable for projects that require large-scale LED surfaces on buildings or construction sites. 💡   The modules have not been individually tested prior to sale and are therefore offered as untested stock . This means that the modules may work, but this cannot be guaranteed . No statement is made regarding the actual functionality of individual panels. 🔍 Deliver ...

⚙ 🔧 In this package you will find multi-purpose waling WU12 Top50 in various lengths 🚧 The walings have the same function as the multi-purpose walings WS10 Top50. Due to the larger profile dimension, they are suitable for higher loads. The hole pattern is identical to that of the multi-purpose walings WS10 Top50 - they are used to transfer the load and give the formwork element stability and rigidity. Depending on the requirements, the support can be attached to the steel wall bar using different fastening devices. 💡 The multi-purpose walings are bundled on support wood. If required, we will also be happy to take care of the delivery 🚛 or you can simply pick up your multi-purpose walings yourself from the Form-on warehouse. Price: from € 41,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sa ...

You don’t want just any slab formwork. You want a formwork system that accelerates your site 🏃‍♂️, simplifies your process ⚙️ and takes pressure off your crew 💪. That’s exactly what Dokadek 30 delivers †fast, flexible, and reliable. This beamless panel floor formwork system features large-format panels, smart assembly logic and minimal components. Formwork from the ground , no beam chaos, no unnecessary complexity †this is what modern site logistics look like. 🚧 ✔ Only two panel sizes †simple and efficient ✔ Slabs up to 30 cm without extra measures ✔ Assembly from ground level †safe and fast ✔ Fully compatible with Dokaflex for maximum flexibility ✔ The ideal choice if you want to buy slab formwork fast ⏳ Attention: Limited stock available! Ἲ ...

This SiteLight 2G package includes 96 used LED mesh modules , offered as a complete set including packaging. The modules originate from a connected SiteLight system and are based on the 2G generation designed for large-scale LED mesh applications. They were originally intended for use as a media façade and construction site communication solution †for example when mounted on façades, scaffolding structures or high-rise formwork in combination with protection screens such as Xbright. This makes them suitable for projects requiring extensive LED surfaces on buildings or temporary installations. 💡   The modules have not been individually inspected before sale and are therefore offered as untested used equipment . Some panels may be functional, but this cannot be guaranteed. No statement is made regarding the actual functionality of individual modules. 🔍 ...

In this package you will find ⭐⭐ star multi-purpose walings in different lengths. The ledgers can be used universally - they are used to transfer loads and give the formwork element stability and rigidity. Depending on the requirements, the beam can be attached to the steel wall ledger using different fasteners. The multi-purpose ledgers are bundled on wooden supports. If required, we can also take care of delivery 🚛 or you can simply collect your multi-purpose walings from the Form-on yard by yourself . Price: from € 73,20 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 2-star Serviced & ready to use. Basic cleaned condition. Medium used formwork & scaffolding with traces of use. Suitable for standard requirements. 17 x Multi-purpose waling WS10 Top50 0.50m (Art-No. 580001000), 2 stars, € 23.5 / pc 17 x Mult ...

Used Doka multi-purpose walings in various lengths. The walings are multifunctional - they transfer loads and give the formwork panel stability and rigidity. Depending on the requirements, the beam can be fastened to the steel wall ledger with different fasteners. The multi-purpose walings have only light rests of concrete. The material shows slight sign of use. The walings are bundled on supp. timber. Price: from € 27,20 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Used formwork & scaffolding suitable for standard up to demanding requirements. 75 x Multi-purpose waling WS10 Top50 0.50m (Art-No. 580001000), 3 stars, € 25.4 / pc 58 x Multi-purpose waling WS10 Top50 0.75m (Art-No. 580002000), 3 stars, € 35.1 / pc 394 x Multi-purpose waling WS10 ...

⚙ 🔧 In this package you will find multi-purpose waling WU12 Top50 in various lengths 🚧 The walings have the same function as the multi-purpose walings WS10 Top50. Due to the larger profile dimension, they are suitable for higher loads. The hole pattern is identical to that of the multi-purpose walings WS10 Top50 - they are used to transfer the load and give the formwork element stability and rigidity. Depending on the requirements, the support can be attached to the steel wall bar using different fastening devices. 💡 The multi-purpose walings are bundled on support wood. If required, we will also be happy to take care of the delivery 🚛 or you can simply pick up your multi-purpose walings yourself from the Form-on warehouse. Price: from € 62,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sa ...

⚙ 🔧 In this package you will find multi-purpose waling WU12 Top50 in various lengths 🚧 The walings have the same function as the multi-purpose walings WS10 Top50. Due to the larger profile dimension, they are suitable for higher loads. The hole pattern is identical to that of the multi-purpose walings WS10 Top50 - they are used to transfer the load and give the formwork element stability and rigidity. Depending on the requirements, the support can be attached to the steel wall bar using different fastening devices. 💡 The multi-purpose walings are bundled on support wood. If required, we will also be happy to take care of the delivery 🚛 or you can simply pick up your multi-purpose walings yourself from the Form-on warehouse. Price: from € 52,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sa ...

Features: Volume 2880 L Operating pressure 2 bar Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Overall height 2650 mm Height 1400 mm Diameter 1400 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description: Operating temperature 20 °C Topsoil: Clapper bottom 2 crane eyes T-piece with CIP line and pressure relief valve CIP Ball Tank cylinder: Level measurement at the top Manhole 350x450 mm Ladder hoes Flange Underbody: Clapper bottom 2 x drain in subfloor 4 trumpet feet, height-adjustable, with washers

A Wiese pendulum bucket elevator in Z-shape for gentle vertical and horizontal conveying of sensitive, light bulk materials (potato chips) is available. Particle size range: 50mm-60mm, max. conveying material temperature: 30°C, moisture: dry, bulk density: 0.07t/m³, conveying capacity: approx. 14.3m³/h, belt speed: 0.22m/s, max. bucket filling: 60%, belt material: EPDM, bucket width: 476mm, support roller diameter: 95mm. Lower edge discharge: 4960mm, feed vertical shaft center: 3490mm, vertical shaft center last discharge: 1675mm. Documentation available. An on-site inspection is possible.

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Memory-Funktion Weinig Powermat 600 Compact ---------------------------------------------------------------------- The machine has been cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----------------------------------------------- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine  ...

Full overhauled valve TEC JET 50 PLUS with no use after maintenance. Ready to send.

Type F-2 Thickness of panel 10-55 mm Edging thickness 0,4-2 mm Feeding speed 13 m/min Air pressure 0,8 MPa Total install power 10 kW Panel width ≥ 80mm With pre-milling Transport dimensions 3700x600x1250 mm Weight 960 kg

Yamato 714 Multihead Weigher, Fully Stainless Steel | Rigidized |, Looking for a high-performance weighing solution for frozen or hard products? This Yamato 714 is a fully stainless steel, rigidized multihead weigher built for demanding production environments., Its flat feed chutes make it ideal for deep-freeze and hard items, preventing sticking or jamming. Optionally, we offer versions with angled chutes for lighter products such as vegetables or flat chutes for frozen products., The machine has been fully overhauled, thoroughly inspected, and is ready for immediate operation., ---------------------------------------------------------------, Specifications – Yamato 714, Weighing Heads - 14 heads, Weighing Range ~20 g up to 3,000 g (single dump); multi-dump possible, Speed - Up to 90 weighings per minute (product dependent), Chute Type - Flat chutes (ideal for frozen/hard product ...

Rooftop Air Conditioner CLIMAVENETA WSM2-T 0354 106.2 kW Cooling capacity: 106.2 kW / 30.2 tons Year of manufacture: 2022 Options: Air filter, Wika air flow sensor, 2 pcs. Belimo damper actuators. Refrigerant circuit: 2 pcs. Heat exchanger: Copper / Aluminum Condenser: Copper / Aluminum Compressors: 4 pcs. Copeland scroll ZP104KCE-TFD-477 (scroll) Number of fans: 2 pcs. + 4 pcs. (centrifugal, EC-fans) Type of refrigerant: R410A Dimensions: 6.1 х 2.25 х 2.41 m Weight: 1780 kg Working hours: 0/0/0/0 h. Condition: Outlet, New

Working width: 220 mm Working height: 120 mm Working height 4-sided: 120 mm Number of Spindles: 10 Spindle arrangement: urlrlououuni Spindle diameter: 50 mm Spindle speed: 6000 rpm Counter bearings: 1-6-7-8-9 Jointer: 1-2-3-4-5-6-7-8-9 Motor powers: 7.5-7.5-11-11-11-15-7.5-11-11- kW Feed speed: 8-80 m/min Feed motor: 18.5 kW Feed: Hydraulic Table lubrication: automatic Weight: 9000 kg Space requirement: 700x160x140 mm Voltage/Frequency: 380V

arm length: 1600 mm tool adaptor: ja fabric-no.: 9787 weight: 4,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Baking area: 12m², decks: 5, deck dimensions X/Y: 1200mm/2000mm, loading guideline with 1kg bread: 30x5, heating type: oil, heating capacity: 90kW, version: Combitherm. Machine dimensions X/Y/Z: approx. 1900mm/3100mm/2450mm, weight: approx. 3000kg. Including lifting table. Documentation available. On-site inspection is possible.

Key data: 80 KG, 33600 mm, 2150 mm

We offer: Shelving system, used partial quantities possible. Material: 17 double stand frames, approx. 2,150 mm 80 shelves, approx. 2,100 mm Depth of a shelf, 2 x 200 mm = 400 mm Load per floor: 80 kg from stock 21698 Harsefeld. Price valid only while stocks last. Subject to changes and errors.

x-axis: 5060 mm y-axis: 3200 mm z-axis: 1000 mm distance between columns: 2700 mm spindle motor: 22/26 kW spindle turning speed range: 6000 U/min rapid traverse: 15 m/min table-size: 5000 x 2400 mm workpiece weight: 18 t Control: FANUC 31i-MB total power requirement: - kW weight of the machine ca.: 45 t dimensions of the machine ca.: 12,6 x 6,5 x 4,15 m - CNC Control FANUC 31i-MB - Tool Changer 32-fold (BT 50) - 3 axes linear scales - Semi-auto universal head (C axis auto 5 degree indexing) - Extension head - Spindle oil cooler - Air conditioner for electrical cabinet - Hydraulic oil cooler - no coolant thru spindle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm continious capacity: 25 mm throat: 315 mm bore stroke: 200 mm bore depth: 280 mm spindle taper MT: 4 feed range: 0,1-1,5 U/min number of feeds: 9 column diameter: ca. 230 mm table-size: 700 x 600 mm surface area: 450 x 560 mm distance spindle/base plate: 1100 mm dimensions: ca. 1000 x 700 x 2400 mm total power requirement: 2,6 kW weight of the machine ca.: 1,1 t emergency stop switch renewed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Some small equipment is available. 1) Water treatment system BWT, year of manufacture: 2006, tanks: 2, max. operating pressure: 10bar, max. test pressure: 11bar, max. operating temperature: 50°C, volume: 48l, control system: BWT Soft-Control II. 2) Weishaupt burner L1Z-B, year of manufacture: 2008, power range: 70kW-415kW. 3) Wet cooler. An on-site inspection is possible.

A laminating machine Windmöller und Hölscher, without adhesive and coating unit, is available. Web width: 1420mm, coating width: 1400mm, max. roll diameter: 1000mm, max. roll weight: 1300kg, core inner and outer diameter: 76mm/95mm, max. mechanical speed: 460m/min, min. material thickness: 15mm, max. material thickness: 250µm, total machine dimensions X/Y: 19500mm/2500mm. The machine was used as a rewinder. Documentation available. On-site inspection is possible.

number of spindles: 4 Stk bore capacity in steel (diameter): 25 mm spindle distance: 475 mm table-size: 450 x 1900 mm morse taper: MK 4 total power requirement: 10,2 kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC portal milling machine TYPE: LF3550/4000CS Year of manufacture: 1966 / overhauled 2010 Manufacturer: Waldrich Siegen Control: CNC840D-Powerline Routes: X-axis 14,000mm table longitudinal Y-axis 4.480mm slider-transverse Z-axis 3,000mm crossbeam vertical W-Axis 300mm Quill Vertical Max. Passage: transverse 3.200mm high 3.800mm Machine table: Length 14.770mm Width 3,100mm max. table load: 145 to Quill: Tool Taper: ISO60 Power: 100KW Max. torque: max. speed 600 rpm Rapid traverses: X-axis 12m/min Y; Z-axis 6m/min Attachment heads: Voltage: manual Description: Right angle milling head (ISO60) Orthogonal milling head (ISO60) Notes: Table guide hydrostatic

Key data: 5 , 450 mm, 120 mm

TECHNICAL DATA: Working width: 450 mm Working height: 120 mm Milling spindle: Ø 40 mm Planing spindle: Ø 50 mm Lower planing spindle with counter bearing Number of spindles: 5 Installed capacity: 56 kW SPINDLE CONFIGURATION: 1: bottom (11 kW) 2-3: right-left (11 kW) 4: upper (11 kW) 5: bottom (11 kW)

Used hot air generator with oil burner Ready for operation at the site

Deze watertank is geschikt voor de opslag van drinkwater en vele andere vloeistoffen. De tanks hebben een wanddikte van circa 6 mm. Aan de boven- en onderkant van de tanks kunnen aansluitingen voor inlaat en uitlaat worden aangebracht. De tank wordt geleverd zonder gemonteerde aansluitingen. Maximale inhoud: 3000 liter Diameter: 1450 mm Hoogte: 2050 mm Gewicht: 70 kg Afmeting deksel: 400 mm 2 exemplaren beschikbaar

Woodward 9905-969 Input Module 6 Channel Mint

Deck Oven Quail Piccolo I-3 - Manufacturer: Wachtel - Type: Piccolo I-3 - In-store baking oven with 3 shelves, 1 proofer, 1 exhaust hood - Inner dimensions per floor: 60x80cm, suitable for 1 tray 60x80cm or 2 trays 60x40cm - Each floor can be controlled individually - Each floor with steam function / steam function - Each floor with top and bottom heat, separately controllable - Control: IQ Touch control - Shelf height approx.: 16cm Technical data; - Electrical connected load: 16.4 kW - Voltage: 400 V AC/3Ph/N/PE/50Hz - Year of construction 10/ 2019 - External dimensions approx. : 98x135x202cm WxDxH

Designed for closing Wire-O® bindings up to 430 mm in width. This unit is not equipped with a hanger feeder and is therefore not suitable for calendar production with hangers. However, this machine is perfectly suited for the production of books and other Wire-O® bound documents. Includes a complete set of closing tools for all common Wire-O® sizes (2:1 and 3:1). Technical specifications: Max. binding width: 430 mm Supported Wire-O® sizes: 1/4” to 1” (2:1 and 3:1 pitch) Output: up to 1,000 books/hour Operation: semi-automatic No calendar hanger feeder included Includes full set of closing tools Power: 230 V / 50 Hz / 3 A

An electric deck oven Wachtel Piccolo I-4 DMS3 with 4 shelves each 60x80cm is functionally tested for sale and immediately available. Deck oven Wachtel Piccolo I-4 DMS without steam - 4 shelves each 60x80cm - Each floor with separate controls - Top and bottom heat can be controlled separately - without steam function! - Control: DMS 3 Master - With storage cabinet for trays - With exhaust hood - Shelf height approx. 16cm (see picture) - Year of construction 2007 - 20.8 kW - Voltage : 400V AC/3Ph/N/PE/50Hz Further information and shipping costs on request.

In-store baking oven convection oven Wiesheu Dibas 64 blue S + L year 2019 In-store baking oven Wiesheu Dibas 64 blue S (upper oven) - for 5 trays 60x40cm - with electric door - with self-cleaning (cleaning program) - With Wiesheu Comfort control - Year of construction 04 / 2019 - Power 9.6 kW - Voltage 400V 3/N/PE - Frequency 50Hz - Rated current 13.9 A - Water pressure 150-600kPa In-store baking oven Wiesheu Dibas 64 blue L (lower oven) - for 10 trays 60x40cm - with electric door - with self-cleaning - With Wiesheu Comfort control - Year of construction 04 / 2019 - Power 19 kW - Voltage 400V 3/N/PE - Frequency 50Hz - Rated current 27.5 A - Water pressure 150-600kPa Exhaust hood 64 200-240V50/60H - X0564-A-ADBC - 200V-240V - 0.25 kW - 50Hz/60Hz - Year of construction 04/2019 External dimensions of the baking station: 94x105x221cm WxDxH

HOT MICROPERFORATOR, Maximum working width 1.200 mm, Total roll width 1.300 mm., Maximum working speed 80 mt./min, Inner Ø 118 mm., Fitted with n.12 x 100 mm.bronze needle holding pieces, Nr.9 needles/sqcm, needle Ø 1,42 mm. (or bespoke to project),, 380 V 3Ph+N+E 50 Hz., Electric panel with digital thermometer to pre-set the working temperature, You can select the temperature on the different heaters (central and side), Pneumatic system to open/close the perforating roll., Roll rotation when in stand-by posittion, to avoid material overheating, Easy replacimg counter-roll in organic bristle., Micro-metric adjustment of needles pressure in work, The needle-holding roll can be very easily replaced to a different needle pattern., conditions: new machine, type: Hot microperforator for plastic films

Dough dividing and warping machine W&P Multimatic 4-row head machine defective Head machine from Werner & Pfleiderer Multimatic 4-row used immediately available in stock for sale. W&P Roll Line / Head Machine Type: Multimatic 4-row - Standing machine - 4 rows - Machine is defective

- 5 floors each 60x80 - Each floor with separate controls - Top and bottom heat can be controlled separately - Each floor with separate steam box - with proofer - With exhaust hood - Floor entrance height top floor 20cm - Floor entrance height lower 4 floors each 14cm - Year of construction: 02 / 2014 - Electrical connected load: 24.97 kW - Voltage: 400V AC/3Ph/N/PE/50Hz External dimensions approx.: 118cm width 116cm depth without exhaust hood 230cm height

- Deck oven Wiesheu electric - 6 shelves each 80x60cm - Double chamber with 1 display each - Each floor with steam function - Power 32.4 kW - With exhaust hood -with proofer -Mobile on castors - Year of construction 2017

grinding diameter: 390 mm grinding length: 650 mm centre height: 200 mm workpiece weight: max. 250 kg x-axis: 380 mm z-axis: 1150 mm sanding disc diameter: 400 mm peripheral speed: 20-50 m/sec workpiece spindle stepless: 1 - 650 U/min tailstock quill taper MT: 4 quill stroke: 45 mm dia. of quill: 50 mm total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

L+Z Lathe WEILER Praktikant 160 – Partially Overhauled Machine in very good used condition – delivery on order, delivery time by arrangement! ✅ Technical data Year of construction: approx. 1990 Digital Display: 3-Axis (NEW) Max. turning diameter over bed: approx. Ø 320 mm Max. turning diameter via support: approx. Ø 198 mm Max. turning length: approx. 650 mm Bar passage: approx. Ø 40 mm Spindle speed: 96 – 2500 rpm Spindle nose: A 2 - 5 Drive power: approx. 2.2 kW Threading: Metric, Inch, DP, Module Tailstock: MK 3 Dimensions (LxWxH): approx. 1700 x 1000 x 1700 mm Weight: approx. 650 kg ✅ Accessories 3-jaw chuck 160 mm (NEW) Quick-change steel holder + 1 insert Electric Lining Guard (NEW) Work light (NEW) Complete machine documentation Emergency stop Various tension wrenches Coolant Setup L+Z Spindle  ...