w 35 used for sale

Manufacturer: Wemhöner, Working length mm: 1400, Working widht mm: 600, Total hight mm: +/-1000,

Manufacturer: Heesemann Druckbalken war noch eigebaut, Type: MFA 6 oder MFA 8 , FREETEXT1: Hubmagnet 6 mm, FREETEXT2: 24 Volt, FREETEXT3: Länge 1470 mm, FREETEXT4: Bauhöhe 200 mm,

Manufacturer: Wemhöner, Type: Transportband, Working length mm: 1500, Working widht mm: 2000, Total hight mm: 1000, Working hight adjustable mm: yes,

Manufacturer: Wemhöner, Driven: yes, incl.control: no, Working widht mm: 900, Width total mm: 1000, Total hight mm: ca 255, Adjustable: no, Roller pitch mm: 200, 1 Stückzahl : 3, 1 Stücklängen mm: 1600,

Manufacturer: Weeke, Type: Num Karte / Grafikkarte, Model: 0224203485K, Serial number: 10355/012 9845, Systemconfiguration: 134457, Year: 1997, was installed in machine: BP 195 T, Production number: 0-618-01-2987, Year :1997

Manufacturer: Wolf Zuluftanlage mit Wärmerückgewinnung, Year: 2014, Control: SeparaterSchaltschrank, Zuluftleistung m³/h: 25000, Heizmedium : Warmwasser, Temperatur vor-rücklauf: PWW 90-70, Jalousieklappen: yes, Stellmotore: yes, Taschenfilter Typ: EU 3, Umrichtergesteuert: yes, Pumps: yes, Einspeisung Wärmerückgewinnung: yes, Kann erfolgen über Produktionsmaschinen: yes, Year :2014

Manufacturer: Weinig Ferigungsanlage, Control: Weinig, Software: Klaes Sofware, Maschinensteuerung: Übergeordnet, Programming station office: yes, Manufacturer1: Weiniig Profimat, Machine type1: Profimat 23, Year of manufacture1: 1999, FREETEXT1: 5 Spindeln, Manufacturer2: Weinig , Machine type2: Unicontrol 10-5, Year of manufacture2: 1999, Manufacturer3: Weinig Transportsytem, Manufacturer4: Weinig, Machine type4: Unitec 10, Year of manufacture4: 1999, Manufacturer5: Stähle Schleifmaschine,

Manufacturer: Numgüttinger, Type: Num 1062 W, Model: aus Weeke bP 155, Serial number: 128327, Year: 1997, war verbaut in Maschine: aus Weeke bP 155, Year :1997

Manufacturer: Weeke, Year: 1996, Type: Frässpindel, Motor mit Getriebe: Werkzeugaufnahme HSK 63, aus Maschine: BP 155, Power kW: 7,5/10, N1-U/min: 750-18000, Motor mit Getriebe: Werkzeugaufnahme HSK 63, FREE TEXT: inkl Drehmotor für C Achse, Year :1996

Manufacturer: WMS, Type: 20051, Year: 2001, Control: Hand, Pneumatical clamping system: yes, Saw blade tiltable up to °: 90-45, Schnitthöhe min-max mm: ca.100, Schnitttiefe min-max mm: 400, Schnittlänge min-max mm: 2110, Width adjustment by engine: yes, Saw blade diameter max mm: 450, Hauptmotorsäge kW: 4, rotations controlled: 2860, Year :2001

Manufacturer: Wiwa Leimpumpe, Rubber coating length cm: 1416, Shore Härte: 50, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 196,

Manufacturer: Wemhöner, Year: 1997, Type: KTV 28/15 - 165, Work piece width min-max mm: 1500, Min.-max. workpiece length in mm: 2800, Min.-max. workpiece height in mm: 10-40, Max. temperature °C: 90 / 180, Placing table: yes, Through running machine: yes, Pressing cylinder: 6, Pin system: no, Landing opening mm: 1, Foil cutter: yes, Through running machine: yes, Year :1997

Manufacturer: Wiwa Leimpumpe, Type: 10018, Year: 90/630310, Volume flow m³/min: 10, Compressed air min/max bar: 8, Year :90/630310

Manufacturer: Walther + Cefla UV, Type: Pilot Signier + UV 2000, Spraying line: yes, Work piece width min-max mm: 1300, Spraying machine: Walther, UV dryers - 4 lamps (number): 1,

Manufacturer: Winkelübergabe mit pnematischer Aushebung, Working length mm: 1000, Working widht mm: 980, Ex-schutz: yes, UV-Band: 200, Total hight mm: 80, Working length mm: 1000, Engine power kW: 0,5, Belt control: Riemenaushebung für Transportrichtung links und rechts/Aushebung 1800 mm länge,

Manufacturer: GWK Walzenheizgerät, Type: Teco 800, FREETEXT1: Kw Leistung 6, FREETEXT2: Warmwasserbetrieb, FREETEXT3: Max. 140 Grad , FREETEXT4: Regelbar,

Manufacturer: Bauerrichter, Type: WRM 4 / S-E, Year: 1997, Number of units: 4, Working widht mm: 800, Through running hight max mm: 60, Diameter of brushes: 400, Number of rotations controlled: 250 - 2500 U/min, Units mounted inclined: 4, Fast exchange device: yes, Through running hight max mm: 60, Polishing width mm: 800, Engine power - kW: 4x 4 kW, Vacuum belt: yes, Exhaust diameter mm: 2 x 200, FREE TEXT: mit Oszillation, Year :1997

Manufacturer: Weeke, Year: 1999, Type: aus Weeke BP 195, Motor mit Getriebe: yes, aus Maschine: 195 Weeke, I-KL: 7,5-10, Motor mit Getriebe: yes, Baugrösse L x B x H mm: Werkzeugaufnahme HSK 63 F/18000-24000 Umin/12 KW Spindel, Year :1999

Manufacturer: HWS Wickelautomat, Type: HWS-S20, Year: 2001, Control: Programm, Work piece width min-max mm: 300-1500, Min.-max. workpiece length in mm: 400-2500, Min.-max. workpiece height in mm: 300-1600, Belt tension adjustable: yes, Function repeat: yes, Chassis: Rollenbahn, FREE TEXT: inkl Druckschuh von oben, Year :2001

Manufacturer: Homag-Weeke Fräsmotor mit C-Achse, Year: 1998, Type: SMZ DIS. E13676, Motor mit Getriebe: yes, aus Maschine: Weeke 195 T, Kw output: 7,5, Volt/Hz: 315-380/400-482, Motor mit Getriebe: yes, Speed rpm: 24000, Flange motor design: yes, Year :1998

Manufacturer: Böhl Wickelautomat , Type: SV 1500, Year: 1993, Control: Siemens S 5, Work piece width min-max mm: 300-1200 , Min.-max. workpiece length in mm: 450-2500, Min.-max. workpiece height in mm: 20-900, Belt conveyor: yes, Aligning station: no, Width:165 to 250 mm: yes, Min-max roller diameter mm: 250, Automatic product recording: yes, Belt inlet control: yes, Function repeat: yes, Feeding belt L x W x H mm: ca 1500, Feed out belt L x W x H mm: ca.1500, Foot switch: Handschalter, Year :1993

Manufacturer: Weinig , Type: Unimat 17 A, Year: 1979, Control: hand, Planing widht mm: 10-170, Planing hight mm: 10-120, Min.-max. workpiece length in mm: 300, Number of spindles: 6, Diameter of the spindle mm: 30, Fast exchange device: no, Rotations of spindles max. rpm: 6000, Separate engine per spindle: yes, Fully suspended drive feeding: no, Year :1979

Manufacturer: Weeke , Model: PKS-CPU, Serial number: 4-086-05-0230,

This 3-axis Werth Scopecheck 300S was manufactured in 2021. It features a measuring range of 300 mm x 200 mm x 200 mm and a resolution of 0.1 µm. The machine includes a multisensor concept with optical, scanning multi-probe, and laser sensor capabilities. If you are looking to get high-quality measurement capabilities, consider the Werth Scopecheck 300S CMM machine we have for sale. Contact us for further details.

Manufacturer: Bohreinheit , Type: Bohrtgetriebe mit Vorlegeeinheit, Year: 1999, Special bore gearbox: yes, Stück Bohrgetriebe : 2, Number of drilling spindles: 2, Grid: 32, Steel drilling head: yes, Run on the machine: Weeke, Quick-change lining: yes, Price per unit Euro: 1500, Available: sofort, FREE TEXT: Kw-Leistung 1,5/ 2000/3360 U/min, Year :1999

Manufacturer: Wire Electronik, Type: GNV 451-20/130, Seriennummer: 85957, Frequenzumrichter: yes, Input: 3X 130 Volt, Output DC Volt: 220 V/50-60 HZ,

Manufacturer: Homag Tellerwechsler, Year: 1999, Type: 8 Fach Wechsler, Length mm: Ersatzteil aus Weeke 195 T, Year :1999

Manufacturer: Bohreinheit , Type: Bohrtgetriebe mit Vorlegeeinheit, Year: 1999, Special bore gearbox: yes, Stück Bohrgetriebe : 2+ 1, Number of drilling spindles: 18/3, Grid: 25, Steel drilling head: yes, Run on the machine: Weeke, Quick-change lining: yes, Price per unit Euro: 1500, Available: sofort, FREE TEXT: Kw-Leistung 1,5/ 2000/3360 U/min, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Seriennummer: 268778-33072, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS03.1-W050-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS02-1-W200-DA01-01-FW, SN Nummer: DDS2.1-W200-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Seriennummer: 269778-3369, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS03.1-W050-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03-1-W030-RA02-02-FW, SN Nummer: DDS03-1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS 303.1-W50-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Seriennummer: 268778, Sytemconfiguration: DDS03.1-W050-DA01-01-FW, SN Nummer: DDS03. 1-W050-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03.1-W030-RA02-02-FW, SN Nummer: DDS03.1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Horizontal turning machine manufactured in 2019. This SCHAUBLIN 102Mi W25 features a W25 spindle nose and an integrated motor headstock. It includes a pneumatic clamping device and a Tripan-111S quick-change tool holder system. The machine is equipped with a 3-jaw chuck and a tailstock with a rotating center. If you are looking to get high-quality turning capabilities, consider the SCHAUBLIN 102Mi W25 machine we have for sale. Contact us for further details.

WALTER Helitronic Power CNC Sharpener TECHNICAL FEATURES: Year: 2008 NC Type: FANUC Series 31i-model A5 Software version installed: Tool Studio 3 Number of axes: 5 Tip height: 145 / 190 [mm] X-axis travel: 470 [mm] X-axis fast feed speed: 15000 [mm/min] Y-axis travel: 330 [mm] Y-axis fast feed speed: 15000 [mm/min] Z-axis travel: 660 [mm] Z-axis fast feed speed: 15000 [mm/min] A-axis travel: 360 [°] C-axis travel: +/- 200 [°] Maximum length Part: Face Grinding: 280 [mm] Maximum length Sharpening Rate: 350 [mm] Maximum diameter Sharpening Rate: 320 [mm] Maximum speed Grinding Spindle: 9500 [RPM] Spindle power : 11.5 [kW] Maximum diameter Grinding wheel: 200 [mm] Number of hours on power: 8948 [h] Pressure sprinkler pump: 7 [bar] Flow rate garden pump: 120 [l/min] Irrigation tray capacity: 400 [l] Supply voltage: 400 [V] Installed power: 25 [kVA] Weight: 4 ...

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03-W030-RA01-02-FW, SN Nummer: DD-S 1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03.1-W030-R-A02-02-FW, SN Nummer: DD03. 1-W030-R, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Num Güttinger, Type: FWA-D1AX02-ASE-02VRS-MS, Modell: Achsregelkarte, Sytemconfiguration: DDS03-1-050-DA01-01-FW, SN Nummer: DD-S 1-W050-D, Year: 1999, war verbaut inMaschine: Weeke BP 195 T, Year :1999

Manufacturer: Wabco , Type: PC-130 MR,

Westa deboning belt, type: W 020, number: 7187, year of construction: 2001, plastic deboning belt, belt width: 610 mm, plastic outfeed rollers, roller width: 480 mm, total dimensions: 6300 mm x 1700 mm x 1150 mm.

Manufacturer: Wemhöner , Type: Doppelseitige Prägeanlage, Year: 2002, Control: Siemens, Operating side: 6-15, Work piece width min-max mm: 100-200, System dismantled: yes, Prägestationen: 2, Reinigungsbürsten Stück: 4, Doppelseitig: yes, FREE TEXT: Transportsystem Wemhöner Vakuum, Year :2002

HBM Wotan WMO B105, CNC control system Siemens 820M

Manufacturer: Weinig, Type: Längs und Querförderer LKF/1, Bauyeshr : 1995, Control: yes, Working length max mm: 3600, Working lenght min mm: 250, Working widht max mm: 220, Feeding speed max m/min: 30, Feeding speed continous adjustable: no, Working hight adjustable mm: 860 +-, Länge Rückführung mm : ca.5000, Angular transfer: yes, Engine power kW: 2, Year :1995

DC motor Stromag 70 kW, gearbox 2 x 960 Nm, with Coperion ZSB 70 side feed. The worm shafts and the end head are missing. Therefore, sales as spare parts carriers.

Manufacturer: Wagner, Type: GM 200, Spraying heads - total: 1, Compressed air bar max: 250, Laquer reservoir litres: 20, Spray gun manufacturer: GM 2000, Spraying stations: 1, Laquer circles: 1, Laquer system - airmix: yes, Electrical power consumption kW: 0,76, Wight approx. kg: 32,

Number of boring spindles: 8 St. Working width: 20 - 230 mm Working height: 8 - 120 mm Length of the planing table: 2.500 mm Feed motor: 4 kW Feed speed: 5 - 24 m/min. total power requirement: ca. 60 kw Dimensions (L/W/H): mm weight of the machine ca.: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the pallet rack crossbar: Shelving system: Nedcon Type: NS The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Box profile: 130 x 50 mm Clasp: 7 HK (hooks) Clear width: 3,700 mm Max. load per pair of trusses 3,000 kg at the same weight. Distributed load 02x Locking pin, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Walk-In Freezer Brand: Kide With EMB1010L1Z Kide Monoblock Refrigeration Unit Refrig. R-404 Load 0.95kg Weight 79kg Year 2015 Dimensions: 2550 x 2300 x 2160mm