w 35 used for sale

x-travel: 19000 mm y-travel: 7600 mm z-travel: 2000 mm w-axis: 5000 mm table surface area: 18500 x 5000 mm table load: max. 500 t distance between columns: 5500 mm power capacity - milling spindle: 110 kW tool taper: CAT #60 Control: FANUC 15i MB total power requirement: - kW weight of the machine ca.: 650 t Overhauled & modernized in 2007 equipped with: - CNC control FANUC 15i MB - 5 heads The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching machine, hydraulic punching machine, hydraulic press, hydraulic press -Insert tool -Width: 290 -Length: 550 -Height: 260 -with hydraulic unit -Steering -Foot switch -Dimensions: 800/700/H1300 mm -Weight: 400 kg

TO WHOM IT MAY CONCERN ; WE VE RECON GOVERNOR WOODWARD UG - 8D AT OUR STOCK. PLS FIND DETAILS ON BELOW. REF NO : 8525 - 620EG GOVERNOR SPEED. : 600 - 1560 SERIAL NO : 2384814 EX STOCK AT IZMIR TURKEY . IT IS READY TO SHIPMENT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

Immediately available completely overhauled injection pump

Ready to ship recon camshaft

Immediately available used exhaust pipe

Immediately available used exhaust pipe

Immediately available used exhaust pipe

Immediately available used exhaust pipe

Immediately available used Pneumatic emergency stop

Immediately available completely overhauled shop air coolers

Immediately available used injection line

Immediately available used hand pump

Immediately available used fuel transfer pump

Immediately available used lubricating oil coolers

Immediately available overhauled lubricating oil pump, even used ones we have all in stock

Immediately available used idler gear

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 3.24 m -Weight: 2.5kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: Dinse DIX KCZ 2-303 water-cooled -Length: 4.0 m -Quantity: 1x hose package available -Weight: 3.2 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Dinse DIX KCZ 2-303 water cooled -Length: 3,2 m -Weight: 2,7 kg

Immediately available used intermediate gear

Immediately available used gear camshaft

Immediately available used fuel double filter

Immediately available used exhaust gas compensator

Immediately available overhauled gas-oil flow covers, also used ones we have all in stock

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Dinse DIX KCZ 2-303 water cooled -Length: 5,3 m -Weight: 4,0 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.2 m -Weight: 3.4 kg

Used crankshaft immediately available

Immediately available new

Immediately available used emergency shutdown

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.45 m -Weight: 3.7 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 3,4 m -Weight: 2,5 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Holch MHS 501-Super water-cooled -Length: 6.35 m -Weight: 5.1 kg

We offer: a construction dryer Make: Wilms Model: Heating Cannon Heater Hot Air Blower Construction Dryer Nominal voltage/ current type: 220 V Fuel: Fuel oil Subject to changes and errors. Sale under exclusion of any warranty and liability for material defects.

Cylinder Head Overhauled PHASE I and PHASE II Also used immediately available

collet chuck, tool holder, tool holder, milling chuck, milling tool -Collet holder: SK40 -Type: ISO40H70ER40 -Clamping sleeve: Ø 14-13 mm -Total dimensions: Ø 63 x 160 mm -Weight: 1.5 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.4 m -Connector: 5-pin -Transport dimensions: 500/460/H100 mm -Weight: 3.3 kg

MIG/MAG hose package extension, intermediate hose package -Welding cable: extension / connection cable water-cooled -Length: 4.35 m -Version: Dinse plug, gas hose, control cable -Connector: 4-pin -Transport dimensions: 470/460/H100 mm -Weight: 6.0 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.35 m -Connector: 5-pin -Transport dimensions: 500/460/H90 mm -Weight: 3.5 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.4 m -Connector: 5-pin -Transport dimensions: 600/420/H70 mm -Weight: 3.6 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.45 m -Transport dimensions: 600/460/H80 mm -Weight: 3.9 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.35 m -Plug: missing -Transport dimensions: 500/480/H90 mm -Weight: 4.1 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.30m -Transport dimensions: 600/420/H90 mm -Weight: 3.8 kg

Crane block, crane hook, load hook, single hook -Crane hook: load hook with adapter frame -Load capacity: 7.5 t -Dimensions: see photos -Transport dimensions: 860/470 (H460 mm -Own weight: 77 kg

electric motor, three-phase motor -Condition: unused -Manufacturer: Weg, electric motor type W22 315S/M-04 -Power: 132 kW -Speed: 1488 rpm -Shaft: Ø 80 x 170 mm -Design: B3 -Protection class: IP 55 -Dimensions: 1280/640/H845 mm -Weight: 991 kg

MIG/MAG hose assembly, MIG/MAG welding torch, MIG/MAG hose assembly extension, intermediate hose assembly -MIG/MAG hose package: water-cooled extension -Length: 9.65 m -Connector: 24/37-pin / see photos -Dimensions: 670/550/H150 mm -Weight: 14 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.3 m -Transport dimensions: 500/400/H110 mm -Weight: 3.5 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.3 m -Transport dimensions: 500/440/H80 mm -Weight: 3.3 kg

bore capacity in steel (diameter): 4 / 6 mm turning speeds: 650 - 12.000 U/min table surface area: 180 160 mm spindle cone: B 10 bore stroke: 50 mm total power requirement: ? kW weight of the machine ca.: 50 kg dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Connectors, plugs, 1-wire female connector, -Manufacturer: Wago, 1-conductor female connector Box with 50 pieces -Type: 734-107/037-047/ 7-pin -Quantity: 7x box available -Price: per box -Dimensions box: 200/145/H40 mm -Weight: 0.4 kg/carton