131,228 used machines on RESALE, but how to find them? Machine Search
Machine type: Two-roll straightening machine Working range: from Ø 4 mm to Ø 32 mm Direction: From left to right Speed: 24m/min Make Kieserling Type WRPF 20/30 Year of construction: Refurbished in 2023
Complete Waukesha CHP power plant Including: Generator set Heat recovery Silincer Exhaust pipe Pumps Pipes Oil system Gas line Sound proof housing Air in and outlet The complete installation is in good condition and directly available. GAS POWER HOLLAND 00316 38 63 90 71
Ultrasonic cleaning system WIWOX, Type MC360 III Year of construction: 2006 € 51,438.00 was the original price at that time. After deducting consumables, it was € 47,650.00. The plant was in operation for about 8-12 hours a week, but in the last 5-6 years it has hardly been used because it has switched to a different technology. Our asking price would be € 15,000.00 on the basis of negotiation.
Generator, generator, emergency generator -Power: 1.5 kVA 200 Hz -for: vibrating bottle -Sachs two-stroke engine: 4000 rpm 2.57 kW -Dimensions: 570/385/H530 mm -Weight: 51 kg
Copper pipe -Sanco copper pipe: EN 1057 -18x: 1 -Roll: 25 m -Number: 2 rolls available -Price: per roll -Dimensions: Ø 760/60 mm -Weight: 10.7 kg
Fan, fan, electric motor, blower, centrifugal roof fan, emergency ventilation fan, flue gas fan -Speed 1420/1260 rpm -Line 0.13/0.09 kW -Dimensions 670/670/H445 mm -Weight 24 kg
Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Motor: Schorch 1.5 kW 1405 rpm -Sale: in the current condition as seen -Dimensions: 490/340/H585 mm -Weight: 46 kg
Syspal 600HA2 Eurobin wash frame 2021, stainless, SWL 50Kgs, 3Ph
Sensor-actuator distributor, distributor strip -Type: SAI-8-MMS 4P M12 -8-way: distributor -Weight: 800 g
Vertical panel saw 5200 x 2200/2100 mm 4 kw motor Panel saw with pliers For trimming pruning
Inv. Num. : 4427 Type: WMX 60i Producer: HURCO Created: 2017 Parameters: Control system: WINMAX Switch-on hours: 5648 h Operating hours: 1554 h Working table length: 1 680 mm Working table width: 660 mm Maximum table load (uniform): 1 360 kg Spindle drive power: 18 kW Maximum vertical spindle speed: 12 000 1/min X-axis travel: 1560 mm Y-axis travel: 660 mm Cone: SK40 Number of all tools: 30 pieces Maximum tool length: 300 mm Maximum tool weight: 15 kg Machine weight: 9 000 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Short cone mount for: bayonet disc attachment -Cone size: 6 -Cone: Ø 106 mm -Bolt circle: Ø 133.4 mm -Through hole: Ø 54 mm -Weight: 15 kg
Technical data for the grating: Manafacture: Gi-Ro Vreden Condition of the goods: new (unobstructed) Reason for return: Wrong order end customer The scope of delivery includes: 01x Press grate, new (unobstructed) Material color: hot-dip galvanized Ctow7lyof8 Total depth: 1,000 mm (support rod direction) Total width: 980 mm (crossbar direction) Support rod diameter: 35/1.7 mm S355JR TS anti-slip: no QS anti-slip: no Edging: T-profile 35 mm Mesh size: 90 x 50 mm Weight: approx. 9.35 kg | Pcs. Internal designation: R
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -DKRD Ø: 160 mm -Weight: 15.5 kg
Technical data for the grating: Manafacture: Gi-Ro Vreden Condition of the goods: new (unobstructed) Reason for return: Wrong order end customer The scope of delivery includes: 01x Press grate, new (unobstructed) Material color: hot-dip galvanized Total depth: 1,000 mm (support rod direction) Total width: 1,230 mm (crossbar direction) Support rod dimensions: 45/1.7 mm S355JR TS anti-slip: no QS anti-slip: no Edging: T-profile 45 mm Mesh size: 60 x 40 mm Weight: approx. 18.11 kg | Pcs. Internal designation: S Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.
Type 1300-2S Working width 1300 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 6.27 kW Transport dimensions 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania) Specifications Type 1300-2S Working width 1300 mm Min. Working length 400 mm Working thickness 5-140mm Grinding shaft speed – adjustable by frequency converter Feed speed 5-20 m/min The total power of the motors is 6.27 kW Dimensions for transportation 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania)
Type 1000-2S Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 4,12 kW Transport dimensions 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania) Specifications Type 1000-2S Working width 1000 mm Min. Working length 400 mm Working thickness 5-140mm Grinding shaft speed – adjustable by frequency converter Feed speed 5-20 m/min The total power of the engines is 4.12 kW Dimensions for transportation 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania)
three-jaw chuck, three-jaw lathe chuck -Handover: in current condition as viewed -Short cone: has been shortened -Chuck size: Ø 200 mm -Through hole: Ø 54 mm -Hole: cone Ø 104.5 mm -as per pictures, without additional accessories -Weight 14.4 kg
Hardness tester Wolpert Testor HT 2001 Year of manufacture 1979 Hardness testing Rockwell Brinell Vickers Weight 185 kg Data Adjustment tool Unchecked!
Face plate diameter: 1.250mm Center height above foundation slab: 1,250mm Weight: 19t Power: 55Kw Max. torque on the face plate: 31,500Nm Maximum workpiece mass between centres: 16,000 kg Speed range: 2.24 – 224 rpm
three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 139 mm -Bolt circle: Ø 170 mm -Through hole: Ø 80 mm -Weight: 24 kg
Reamer, twist drill, drill -Twist drills: different sizes on request -different manufacturers -Price: Ø 10 - 30 mm 0.50 EUR/mm (drill Ø 20 mm = 10 EUR net) -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) -Two-cutter -Diameter: 10-80mm -different lengths -Recordings: MK1 - MK6 -Type: HSS
Brush machine Wandres type Ingromat Cleaner CF04/400 Specifications: • Working width (mm): 400 • Brush: top and bottom • Spraying device
Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Surface: very good -Width: 500 mm -Length: 800 mm -Height: 175 mm -Plate thickness: 26 mm -with: support ribs -Weight: 90 kg
Waters Acquity UPLC-MS System, Used Acquity UPLC-MS System by Waters from 2009, used very little, with systematic proof of maintenance, from a large pharmaceutical company, with 6 months warranty and training and installation at the customer's site. . The system is sold with an additional set of spare parts in the form of an identical UPLC system (without MS). Each system can be viewed and tested in operation. The UPLC-MS system consists of the following parts: - SQD mass detector - Sample Organizer - Sample Manager - PDA detector - Binary Pump Manager - Column Manager Price complete system with additional modules as spare parts
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Piston rod: Ø 25 mm -Stroke: 100 mm -Dimensions: 95/95/H310 mm -Weight: 6.1 kg
Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: TB100x50 Agraffe: 4 HK (hook) Clear width: 1,850 mm max. load per pair of trusses 2,650 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.
Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: TB100x50 Agraffe: 4 HK (hook) Clear width: 2,700 mm max. load per pair of trusses 1,600 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.
Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: TB120x50 Agraffe: 4 HK (hook) Clear width: 2,700 mm max. load per pair of trusses 2,400 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.
Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: TB160x50 Agraffe: 5 HK (hook) Clear width: 3,300 mm max. load per pair of trusses 3,050 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.
Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: TB140x50 Agraffe: 5 HK (hook) Clear width: 2,700 mm max. load per pair of trusses 3,300 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.
Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: 2C155 Agraffe: 5 HK (hook) clear width: 3,600 mm max. load per pair of trusses 3,700 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.
Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: TB150x50 Agraffe: 5 HK (hook) clear width: 3,600 mm max. load per pair of trusses 2,400 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.
Weibert WJ-KS30S Oscillating edge grinding machine WEIBERT WJ-KS30S with polished veneer 400V 3 KW (4 HP) n=2840 min Work table 960x350 mm Table height adjustment 230 mm Sanding belt back panel 1050x200 mm Belt speed 20 m/sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 HP) Can be switched on/off Machine table and guides made of GREY CAST IRON Quick adjustment of the swivel 90°-45° with degree display Weight of 400 kg Suction nozzle 120 mm Roll pull-out table widening Belt width 200 mm WJ-R00300 Optional at extra charge: Roll extension table widening WJ-R00101 Mitre stop WJ-R00102 Feeder console WJ-R00204 Driving device WJ-R00103
A Weiler Primus precision lathe with milling device is offered and extensive accessories in very good condition. A large part of the accessories are unused. Specifications: Center height 120 mm Distance between centers 420 mm Swing diameter over bed 245 mm Spindle bore 23 mm Spindle speeds 18 Speed range 60 - 3000 rpm Motor power 1.1 / 1.5 kW Motor spindle brake Large feed protection - chip protection hood External dimensions approx. Length 120cm Depth 750mm Height 170cm Weight approx. 500 kg Accessories: Multifix A - 5 steel brackets 3-jaw chuck Ø 125 mm 4-jaw chuck Ø 125 mm Various interchangeable jaws Thumper CGN-1969 Eccentric lathe chuck 80mm (unused) Face plate Carrier for rotary heart Standing bezel Moving bezel Collets for internal and external clamping Various moving bezels Extensive accessories for milling equipment such as clamping screws, cl ...
: 8 St. range L-W-H: 720 x 580 x 1000 mm weight: 128 kg : 100Kg je Lade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 6 St. range L-W-H: 880 x 580 x 800 mm weight: 126 kg : 100Kg je Lade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bezel, steady rest, lynette -max. passage: Ø 210 mm -Centre height: 390 mm -technical drawing: in the photos -Dimensions: 600/125/H625 mm -Weight: 53.5 kg
On sale is a complete line for the production of longitudinal and transverse plates. 1. Weinig Dimter high frequency press. 2. Grecon Ultra4 longitudinal line. 3. Line for width connection Obel. 4. Hobelrotoles. 5. Timesavers 1350 mm grinding machine with three units. 6. Planer Schenko (with lifting platform for parcels) + conveyor belt + charger. 7. SLH cold width press. 8. Thermal tunnel for individual packaging of plates. 9. Glue applicator Inles. 10. Glue applicator for slats. 11. Obles line for longitudinal connection of slats.
SB163VH Box column drill Motor: 1100W 230V 50Hz Table size: 356x356 mm Dimensions set-up: 740x470x1710 mm Drilling capacity max. D= 16mm Max. spindle stroke 150mm LCD display Variable speed adjustment LED light Spindle mount MK3 Drilling spindle speed 460-2100 1/min Drilling depth stop Fold-away quick-release chuck cover tilting drill table +/-45° arbitrarily height-adjustable solid base plate Drill column with ground surface Weight 88.5 kg G&HM-SB163VH-230V
Weibert WJ-D63 Thickness planer Planing width of 630mm 4-reversible knife shaft planing shaft D=125mm Knife shaft speed 5000 min/1 Thickness passage, min/max mm 3 to 300mm Motor planer shaft 9,5 KW 400V 50HZ Motor for electronic height adjustment of the thickness table with digital display Motor for feed 1.5 KW (2 HP) Max. chip removal of 8mm Passage height from 3-300mm Feed speed from 5 to 21 m/min. Suction nozzle of 160mm Machine table, planer shaft bearing block and table guide made of cast iron! External dimensions L=900 W=1120 H=1145 mm Total weight 1100kg G&WJ-D63 Optional spiral planing shaft G&WJ-D63-SPIRAL
Super 300 lawn sweeper, with towing device, towing eye, overrun brake, hydraulic drawbar adjustment / brush removal. PTO drive 540 rpm, working width 1.50 m, double roller sweeping system, approx. 2.5 m³ container volume, hydraulic container emptying. Hydraulic connection ew required. Built in 1994, good sheet metal. Incl. lighting equipment according to StVZO. Other lawn sweepers available, working widths of 90-180 cm, from 150 cm also with high emptying. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for facility and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping work and disposal, environmental care, engines and more...
Weibert 2,5t Pallet trucks Industrial and commercial execution with weighing device Display Lifting capacity 2500 kg max. fork height 192mm min. fork height 77mm Fork dimensions 1150x540mm Stroke 120mm Roll diameter 180/80mm Weight 99.5kg G&HM-HUBW CRADLE
Weibert WJ-FS-41 Top Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height planed dressing and thickness tables Spiral planer knife shaft WJ-300200
Very well preserved CNC lathe WEISSER Heilbronn, type Gigant. From precision operation, only ultra-fine machining. Details Type Gigant Machine No. 27-0166 hydraulically self-tightening fork art chuck with power clamping cylinder 4x Sauter revolver, size 400 mm2 Siemens SINUMERIK 840D fully functional Commissioning 04/2003 Travels X 725 mm (stroke), Z 1,480 mm Main spindle drive DC 45 kW (nominal power) Speeds in 3 stages up to max. 1,120 rpm a set of basic jaws inside/outside without Lynette (but can be provided for customization) incl. documentation
Bread long knitting machine, Fabr. Winkler, Combi-Langroller
Bread dough dividing machine, Fabr.Winkler, Type Hydromat
maximum number of results exceeded
please refine your search
