w 35 used for sale

WESTFALIA KDA 16-02-177 QUARK & YOGHURT SEPARATOR CAPACITY: 1.000 KG/H PRODUCT SOME PARTS ARE MISSING PLEASE CONTATCT FOR MORE INFORMATION

WESTFALIA SAMM 12006 CREAM SEPARATOR FOR MILK & WHEY CAPACITY: 12.000 LT/H COMES WITH A SPARE HYDROULIC CLUTCH

Shared oven Wiesheu EBO 5-124 Year: 2011 -Floor shop oven electric from Wiesheu GmbH -Oven is with 5 floors -each floor 120cm and 40cm deep -Year of construction 2011 -36.35 kW -with IS 600 control -top floor is with own control display -lower floors are each 1 control for 2 floors -Oven is mobile on rolls -Furnace with exhaust hood and vapour condenser

pdf attached

In-store oven Quail Mini Thermic Plus 10 - Quail Mini Thermic Plus 10 hot air oven - Ovens 5+5 controllable - for 5 + 5 baking trays 60x40cm - Door stop on the right - elek. Power supply: 18.2 kW - with proofing cabinet - Control: Shopmatic 5 Plus Timer - 400 Volt AC /3Ph/N/PE/ 50Hz - Year of construction 10 / 2008

Used in-store oven Wiesheu B8E2 IS600, for 8 trays 60x40 cm with exhaust hood and proofing cabinet from year of construction 2007. The oven is with fixed water connection for swathing and can be driven on wheels.We have a large selection of in-store ovens in the warehouse to visit at any time. Shipping and trade-in on request. Wiesheu in-store oven -Type: B8 E2 IS 600 -for max. 8 sheets -for 60x40 cm sheets -digital IS600 controller -can be driven on swivel castors -400 V - 50 Hz - 18.4 kW-26.6 A With proofing cabinet GS2_ED60/40_Gärschr._230V50Hz -20 runs for 60x40 cm sheets optionally also 10 runs for 60x80 cm - Dimensions Height: 217 cm Width: 93 cm Depth: 97 cm -Technical data proofing cabinet -Year of construction 2007 -2.1 kW 230 volts 9.1A

Progressing cavity pump Manufacturer: Wangen Type: KL 505S-50.4 Item #: 900,588 Year of construction: 1995 Pressure: 4-10 bar very good condition with plug & on-off button LBH: 2800 x 300 x 320 mm

Shared oven WP Matador Store 6.4 A used electrically heated shared oven WP Matador Store 6.4 for bakery and confectionery is currently for sale and immediately available in our warehouse in Bielefeld. The stove is equipped with base and exhaust hood. Floor oven W&P Matador Store 6.4 - 4 floors each 60x40cm -per floor one sheet 60x40cm -1 x Hood 8 x ADK with RBA 0.1 kW 230 Volt - 1x base 6.4 600 - with exhaust air hood including vapour condenser -electrical data per floor: 3.6kW; 3-400V; 1.45 kW - Year of construction External dimensions approx. Width : 93cm Depth 100cm Height: 210cm incl. hood Floor entrance height 14cm Oven is functionally tested and cleaned -Oven can be inspected and tested in our warehouse

CATALOG NUMBER 6674 TECHNICAL DATA - max planing width 150mm - max planing height 130mm 7 spindles: 1) horizontal lower 150mm 3kW 2) vertical right 130mm 3kW 3) vertical left 130mm 4kW 4) horizontal upper 150mm 4kW 5) horizontal lower 150mm 3kW 6) vertical right 130mm 4kW - diameter of all spindles 35mm - all adjustable spindles up / down and right / left - from above, 4 pulling rollers, toothed - 4 rubber, pulling rollers from above - 2 clamps from above - electric adjustment of the planing thickness of 0.25kW - length of the introductory top 1970mm - central lubrication of the table top - smooth regulation of the feed speed - 1.5kW feed motor - diameters of the extraction ports 6x120mm - dimensions length / width / height 4000x1300x1600mm - weight about 3000 kg - German production - for 6 heads - used planer, very good condition Net price: PLN 36900  ...

Waldner Dosomat 12.6 filler and sealer for foil trays. Currently set up for using 82mm diameter foils for meat paste like pate or pet foods. Machine is in lovely condition and available for inspection.

pressure: 25 t stroke: mm table surface area: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: WP Capacity: 25 T Distance between columns: 760 mm Distance between cylinder and table: 950 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1100 mm turning diameter over slide rest: 780 mm turning length: 4100 mm Control: Siemens type: 840 D bed width: 710 mm faceplate: 1000 mm turning speeds: 1110 U/min total power requirement: 4,79-69 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roll-out machine Kombi WLS Jewel Model: 16 CW for all doughs for rolling out and touring Infinitely variable roller adjustment Pull-out table left and right Active pressure plate with manual adjustment with long roller / long knitter below with tow for wrapped products Dough roll-out machine can be driven with locking device With flour container Connection 400V, 16A-CEE plug Used machine cleaned 6 months warranty Visit our large Bakery Machinery Center.

small shrink line for sale consisting of vacuum chamber machine C 30 and shrink tank ST 40/60 - both mobile C 30 New machine - ST 40/60 overhauled 2022

Dimensions (L/W/H): 13000x1700x1700 mm Weight: 1950 kg Total power requirement: 13,5 / 17,5 kW kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 13000x1700x1700 mm Weight: 1650 kg Total power requirement: 10 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SMA 700 Rocker saw Firewood saw Battery starter G&JAN-1055006

Weibert WJ-F10 Swivel spindle milling machine Milling machine: swivel 90°-45° Milling U/min 1400/3500/6000 and 8000 Sliding table 1150mm (Optional 1600mm) Engine power: 400V 3 KW (4.0 hp) WY-600100 Options at extra cost: Telescope 900mm WJ-600108 Eccentric tensioner Milling motor 4 KW (5.5HP), S1 100% Milling motor 5.5 KW (7.5 HP)S1, WJ-600102 Milling spindle 40,50 or 60mm, Integral safety rails 500mm, WJ-500111 Right and left-hand milling machine, WJ-600106 Table extension right/left, WJ-600107 Feed

Following separator available for sale. Make: ALFA LAVAL Type: WHPX 505 TGD 24-60 Serial Number: 2993137 RPM: 1700-1800 r/m ,142-150 Product No.: 881002 Machine Topper No.: 537245-80 Bowl No.: 537170-80 Machine Bottom part: 540224-04 MOTOR Make: Made in Italy No.: 17019 19Z Volt: 440 HZ: 60 KW: 4.2 RPM: 1720

Webo BR 35 V / 1250 Radial Drill Workspace Delete. v Spindle to stand smallest 280 mm / largest 1250 mm Delete. v Spindle or drill. b. Table top smallest 0 mm / largest 900 mm Delete. v Spindle to base plate smallest 200 mm / largest 1400 mm Diameter of the drill smallest 860mm / largest 2800 mm Swivel range 2,200mm / clamping diameter approx. 240mm Aufspannfl. upper 650 x 500 mm / side 770 x 500 mm Drilling spindle 40/85 ⌀ mm Speed 30 - 1800 rpm Year of construction 1971 Further technical data can be found on the machine map Item condition: used, impeccably and top maintained. Action components: Only the Webo BR 35 V / 1250 without the shown reversible clamp, this can be done individually or as a combination offer in our other Auction can be purchased. Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loadin ...

: 10000 m³/h Weight: 700 kg Motor output: 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weight: 870 kg Motor output: 15 kW : 12,500 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting height: 145 mm weight of the machine ca.: 480 kg Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weipert Crankshaft Grinding Machine Weipert Grinding lathe Centering tip: Röhm 110 H MK5 Machine length: 4300 mm Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. More grinding machines in other sizes - new and used - can be found in our shop! International shipping costs on request!

: 8500 m³/h Motor output: 11 kW Filter capacity: 47 m² The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Motor output: 7,5 kW Weight: 450 kg : 6500 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working length: 1000-1600 mm working width: 40-150 mm Thickness: 10-80 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

output: 18,5 kw number of blades: 28 Weight: 1300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1400x2450x2800 mm Total pressure: 400 to weight of the machine ca.: 12000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weight: 280 kg Motor output: 4 kW : 4000 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Synchronous motor, MAC117D-0-FS-4-C/130-B-1/WI522LV, R911232504, Rexroth, refurbished-mint condition Special price Used and overhauled! The part was purchased from a spare parts warehouse of a company. The synchronous motor was completely reconditioned by Bosch Rexroth and is therefore in mint condition. - Synchronous motor, permanent magnet motor - 600 V / 3 pol. - 4000 rpm - 23 Nm - 53,2 A - 29 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Synchronous motor, MAC071C-0-US-4-C/095-A-2/WI517LV, Rexroth, refurbished-mint condition, R911247491, Special price Used and overhauled! The part was purchased from a spare parts warehouse of a company. The main spindle was completely reconditioned by Bosch Rexroth and is therefore in a mint condition. - Synchronous motor, permanent magnet motor - 600 V - 2000 rpm - 10 Nm - 12 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Filter capacity: 16,3 m² Motor output: 5,5 kW : 5000 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.