w 35 used for sale

New and unused 2023 generator set with 0 running hours.; Gross weight [kg]: 7753; Engine: Perkins 4008-30TAG3; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

We offer here a climate test chamber from Weiss with Feucht! The climate test chamber was only serviced by Weiss/Vötsch in Dec, 2020 and has the test sticker until Dec. 2021! All tests were carried out, another test run was carried out in our company, the humidity and temperature were checked with calibrated test equipment. The climate test chamber has been subjected to an annual inspection and is in a perfect condition! The logbook is attached WHITE 1500SB/010JU/40DU Temperature range -40°C - +180°C Humidity 15%- 95% Air conditioning: +10°C - +95°C Pihyv Test room: 1500 liters Internal dimensions: 1490 mm deep, 1100mm wide, 945mm high External dimensions: 2470mm wide, 2000mm high, 1450 wide Weight approx. 1100kg Refrigerant: R404a 2,00kg Cabinet has no feet and stands stably on a frame If you have any further questions, please do not hesitate to contact us

We have 8 pieces of W8L32 pistons in our stock in istanbul Slightly used in brand new condition with very low working hours All piston ring grooves standart size with measurement report available We also have covers , liners , conrods, fuel pumps and more ... please contact us at: info@fin-marine for more information

used lift-tilt device Manufacturer: WAGNER UMWELTTECHNIK Type: W HKV Year of construction: 2008 Load capacity:500 kg Drive power: ___ kW

used non-ferrous separator Manufacturer: WAGNER Type: 0428-25/60 Machine No.: 214401 Year of construction: 1994 specifications: Conveying width: approx. 600 mm Throughput: 40-65 m³/h Belt speed: 0.12 m/sec to 1.3 m/sec Weight: approx. 1,200 kg Protection class: IP 54 (control device) Motor rotor drive: 3.7/4.7 kW Motor belt drive: 0.75 kW

Three-phase motor brand new, WEG-Bosch, 280S/M02, IP55, B3, 2,980 rpm, 75/85 kW, 380/660 V, also suitable for 415, 440, 460 V, 50/60 HZ

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: Speedlock Super 4 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Truss type: SLO 115|2 Box profile: 115 x 50 mm Agraffe: 4 HK (hooks) Clear width: 2,695 mm Max. load per pair of trusses 2,900 kg, with the same weight. distributed load. 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Extraction unit for filler station or preparation station: Make : Wolf Year of construction : 2009 Dimensions : 1.5 m x 1.5 m x 1.5 m (approx. WxLxH) Volume flow : 19,000 or 9,500 m3/h, 1895 or 948 1/min; 7.5 or 2.0 kW Pipelines : optional exhaust air pipes and deflector hood. Electrics : Control cabinet Location : Warehouse Area Nuremberg Retail price : € 3.350,- net ex location

EU STAGE 5 Compliant, 50/60 Hz switchable frequency via terminal link, 550 kVA Prime power, Spark arresting silencer; Gross weight [kg]: 6740; Engine: Perkins 2806J-E18TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets CEE-Form:, 2x 16A (1ph+N+E), 2x 32A (3ph+N+E), 1x 63A (3ph+N+E), 1x 125A (3ph+N+E); Water Tank Volume [l]: 1125

; Gross weight [kg]: 3651; Engine: Perkins 1206J-E70TTAG; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets: 125A, 63A, 32A (2x), 16A (2x single phase), Including: Coolant heater and battery charger; Water Tank Volume [l]: 822

used shared shop oven Wachtel Piccolo I-5 DMS 3 Master Timer from year of construction 2011 is immediately available for sale in the warehouse in Bielefeld. The furnace is tested for function and cleaned. -5 floors each 60x80cm -each floor with separate control -each floor with upper and lower heat separately adjustable -each floor has its own steam box for steam -each floor with security viewing glass door -with exhaust air hood -with proofing cabinet -Year of construction 08/2011 -electrical power supply 26.9 kW -400V AC/3Ph/N/PE/50Hz Dimensions: Width: 97cm Depth approx. 134cm Height: 237cm

-electric stone slab oven quail -Model Piccolo I-6 -Control DMS 3 m. Clock Timer K -6 floors each 60x80cm -each floor with separate control -each floor with top and bottom heat separately adjustable -each floor has its own steam box -each floor with security viewing glass door -with exhaust air hood -with proofing cabinet -Year of construction: 11 / 2011 -electrical power supply 31.1 kW -400V AC/3Ph/N/PE/50Hz Dimensions: Width: 97cm Depth approx. 134cm Height: 234cm

; Gross weight [kg]: 735; Engine: Perkins 404J-22G; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 56

; Gross weight [kg]: 4103; Engine: Perkins 1706J-E93TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets: 125A, 63A, 32A (2x), 16A (2x single phase), Including: Coolant heater and battery charger; Water Tank Volume [l]: 667

RECON Part Number: 305781B Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

; Gross weight [kg]: 2527; Engine: Perkins 1204J-E44TTAG2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 518

In-store oven Wiesheu B10 Dibas 2 Hot air oven Wiesheu Dibas for 10 trays 60x40cm with fermentation cabinet and exhaust air hood including steam condenser immediately available in the warehouse for sale. -Oven is for 10 trays 60x40cm -with automatic door -with IS600 control -Year of construction 2006 -Rated current 26.6 A -Power: 18.4 kW -Proofing cabinet for 20 sheets 60x40cm -Model : GS2 ED60/40 0700_A-BJDBA -Year of construction 2009 -Connection: 2.1 kW Dimensions: Width: 93cm Depth: 105cm Height 218cm

RECON Part Number: 300007B V- Machine ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

W&P Batch Kneader Type: UC 80 A with stainless steel boiler Stainless steel spiral Flour dust cover 2x automatic timers 2x speeds for max. 120 kg dough

Current stock: approx. 350 pcs. Included in delivery are: 01x Bockrolle, used Material color roll: black Material color frame: sendz. galvanized Specifications: Total height: approx. 155 mm Rolls Ø: approx. 125 mm Roll width: approx. 37.5 mm Roll material: Solid rubber Rim material: Polypropylene Plate abbreviation: approx. 100 x 90 mm (WxD) Hole Ø: approx. 9 mm Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.803 kg

Dimensions (L/W/H): 3500x2300x1780 mm Weight: 4000 kg Total power requirement: 27,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1920x3520x6300 mm Weight: 2500 kg Total power requirement: bis max. 22 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Quail shared shop oven Type: Piccolo I-8 8 floors for 1x sheet metal each 60×40 cm with extractor hood fan DMS 3 Master Timer Control Upper and lower heat separately adjustable Year of construction 2005 Stove has strong signs of wear the upper 2 floors indicate errors All other floors work perfectly Achievement: 400 V / AC / 3Ph / N / PE / 50 Hz Height: 230cm Width: 95cm Depth: 100cm

Dimensions (L/W/H): 2200x1340x1050 mm Weight: 640 kg Total power requirement: 1,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1750x1100x1640 mm Weight: 1000 kg Total power requirement: 15 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 7000x2900x2100 mm Weight: 4500 kg Total power requirement: 35 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2860x1120x1140 mm Weight: 1260 kg Total power requirement: 19 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1170x560x570 mm Weight: 55 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 190 kg Total power requirement: 2,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2000x1960x1470 mm Weight: 900 kg Total power requirement: 8,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WARTSILA 8L32 CRANKSHAFT STD SIZE TOGETHER WITH GEARS AND COUNTERWEIGHTS

2 PCS WARTSILA 6R32 CRANKSHAFTS , STD SIZE. TOGETHER WITH GEARS AND COUNTERWEIGHTS

WARTSILA 6L20 CRANKSHAFTS , STD SIZE , 2 PCS TOGETHER WITH GEARS AND COUNTERWEIGHTS

Hello all We have in our stock in istanbul Turkey 2 x WARTSILA 8R32 CRANKSHAFTS, STD SIZE TOGETHER WITH GEARS AND COUNTERWEIGHTS Please contact us at : info@fin-marine for more info

Dimensions (L/W/H): 10000x2500x1600 mm Weight: 3300 kg Total power requirement: 16,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 800x600x500 mm Weight: 60 kg Total power requirement: 0,25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3940x850x1350 mm Weight: 410 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Тип: Z4A Число осей/ шпинделей Доступны различные варианты головок 4x3 Расстояние между крайними шпинделями 2300 mm Регулируемая скорость сверления Высота стола от пола 840 mm Размеры стола 600x2350 mm Число прижимов 8 Мощность двигателя 6 kW(4x1,5) 400 V Скорость двигателя 2840 r.p.m Необходимое давление воздуха 6-8 bar Вес 425 kg Размеры для транспортировки 2450x960x1550 mm

Dimensions (L/W/H): 0x0x0 mm Weight: 3500 kg Total power requirement: 57,7 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3200x1960x1470 mm Weight: 1000 kg Total power requirement: 8,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3150x4000x1900 mm Weight: 1500 kg Total power requirement: 36 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6800x2900x2100 mm Weight: 4500 kg Total power requirement: 36 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3900x2230x3900 mm Weight: 1500 kg Total power requirement: 18 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x1295x1300 mm Weight: 1500 kg Total power requirement: 16,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wire strapping WAHLER Plant description Automatic WAHLER wire strapping machine (WDU-750-BDFB), construction year 1995, for the strapping of paving stones and high concrete products (bricks, curbs, etc.). Strapping height minimum: 30 mm above OK board Strapping frame size 3 (1,500 x 1,250 mm => board size 1,400 x 1,100 mm) Components: - Base frame to accommodate the lifting frame frame in welded Profile steel construction - Clamping and closure unit for galvanized flat steel wire 1.60 x 0.60 mm - Double lifting device for 2 strapping at different heights (adjustable) - Strapping frame in welded angle steel version with pneumatically operated wire guide rails made of highly wear-resistant steel - Stone compactor, acting on all sides - Wire unwinding device - Pneumatic equipment with valves, compressed air cylinders, etc. - Control cabinet with PLC cont ...

Dimensions (L/W/H): 3000x1070x1200 mm Weight: 1150 kg Total power requirement: 10 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Webo in-line drilling machine - 2 machines: speed 90 - 1000 1/min. - 4 machines: speed 4000 - 6000 1/min. - Coolant device - Tool holder: MK2 - Width: 200 cm - Height: 200 cm - Depth: 100 cm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Dimensions (L/W/H): 4500x1200x1200 mm Weight: 1500 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.