w 35 used for sale

Planscheibein little used condition in wooden box Manufacturer presumably Röhm Diameter approx.610mm Through hole approx. xxx mm Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price

Type MJ900-X3 Spindle diameter 74 mm Diameter of sawblades 205 mm Cutting width 900 mm Cutting thickness 5-25 mm Speed 2600 rpm Motor power 15 kW Feed speed 0-12 m/min. Feeding motor 1,5 kW Transport dimensions 2100x1400x1350 mm Weight 1700 kg Delivery term: ~ 3 months.

Kegelrundwirker W&P CR 59 -Bread dough Rundwirker Werner & Pfleiderer -Model CR 59 -with oiling -With Teflon Kegel -with hot air

Shop oven Wiesheu B4-E2 and B8-E2 Type: B4-E2 and B8-E2 2 ovens on top of each other Stainless steel clad digital control 5 lengths 60x40 cm (upper oven) 8 lengths 60x40 cm (lower oven) Mobile on steering wheels Dimensions: Height: 210 cm Width: 95 cm Depth: 90 cm Technical data: upper oven: B4-E2 9.2 kW lower oven: B8-E2 18.4 kW both from 2012 400V - 50 Hz

TO WHOM IT MAY CONCERN; WE VE 1 PCS NEW & UNUSED WOODWARD 723 PLUS DIGITAL SPEED CONTROL AT OUR STOCK. WE VE ALSO 9 PCS USED 723 PLUS AT OUR STOCK . WE DISMANTLED THOSE CARDS FROM RUNNING SYSTEM. PLS FIND DETAIL NEW PART NO 8280 -488 REV D CTRL ASSY 9906-619. REV G USED PART NO 8280 - 5010 PAAE034117 REVISION NEW 2PCS ( WARTSILA W9L 20 ) PART NO 9906 - 619 REVISION NEW 6PCS PART NO 8280 - 336 1PCS ALL PANELS LOCATED IZMIR TURKEY . READY TO SHIPMENT. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba Best Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Complete 48 MW Westinghouse W251-B11A Gas Turbine with a Brush electric generator, 3000 rpm, 50 HZ, 11.5 KV, may be modified as Dual Fuel GT ied

Key data: 6400 , 8000 , 11000

12.8 MW WARTSILA HFO fired power plant 18V32LN x 2, 6.52 MW / 11 KV / 60 Hz , Year 1998, Running hours : 27000 , may convert to 50 Hz if required. It is possible to covert as Dual Fuel generator ( Gas / Diesel or HFO )

Key data: 1000 , 1250 , 400

WAUKESHA P9390GL 1 MW 400V / 50 Hz / 1000 rpm, only 6000 hrs, year 1996, dismantled from Landfill station

Laboratory kneader Volume: 1 litre Product-contacted areas: stainless steel VA Vacuum-resistant Temperable Subject to prior sale - Errors possible

Extension 1600 mm

- Table size (W x D): 500 x 120 mm - with clamping jaw - Size stop plate (W x H): 520 x 265 mm - Stop plate can be moved left and right - Tilt of table and stop: 45° to the left or right - Depth of the sawing unit: 175 mm - automatic lubrication of the saw chain - Diameter suction connection: 600 mm - incl. chains: 2 x 6mm; 1 x 8 mm; 2 x 10 mm; 1 x 11 mm; 2 x 12 mm; 2 x 14 mm; 2 x 16 mm - incl. swords: 1 x 6|40x150; 2 x 12-14|40x150; 2 x 16|40x150 - Weight: approx. 350 kg Engine data: - Connection voltage: 380 V - Frequency: 50 Hz - Current: 3.5 A - Power: 1.5 KW - Speed: 2,880 rpm - Control voltage: 220 V Dimensions (H x W x D): 1,800 x 600 x 900 mm Transport dimensions (H x W x D): 1,900 x 800 x 1,200 mm (without stop plate) on EURO pallet Transport dimensions fully assembled (H x W x D): 1,900 x 1,400 x 1,200 mm on EURO pallet Weight: approx. 400 kg (i ...

Weibert K350 Format circular saw Format sliding table: 3.2m Engine: 5.5kW 400V 50Hz S1 Speed: 3800- 5200 rpm Saw blade diameter: max. 400mm Electrical height adjustment Electric swivel 0-45° Cutting height 90°: 120 mm Cutting height 45°: 75 mm Cutting width: 1250mm with pre-scratcher D=120 bore 20mm Electrical height adjustment Weight 1100kg

The scope of delivery includes: 01x Ceiling Mirror, II. Choice ( New) Outer diameter: 800 mm Total height: approx. 300 mm Material: Plastic Incl. fastening chain: approx. 5,000 mm Weight / piece: approx. 2.10 kg Note: This is a second choice product, new unused. II. Choice means there may be dust deposits, minimal scratches or soiling. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

GEARBOX INFO Listing ID 20103 Make REINTJES Model WAV 500 B Serial No. 46816 Power 588 KW RPM 1900 RPM REDUCTION 5.158:1 General Info Condition Runner Application Marine Weight (kg) 1355 KG

Hydropower - Power: 240 kW consisting of: 1 piece turbine Pelton/ paygap 225m, water quantity 130 l/s, manufacturer; Escher-Wyss 1 piece generator power 240 kW, manufacturer; Barthold

Jetzone furnace Manufacturer: CPM WOLVERINE PROCTOR Ltd. Model: SND 1.5 x 202 Year: 2016 Productivity: 450 kg / h Dimensions: 8136 x 3581 x 4376 Heating medium: natural gas Description: A high-speed dryer consisting of two main elements: a fitting equipped with heating and distribution elements, and a production conveyor.

WIPOTEC CHECKWEIGHER, MODEL OCS HC-A Year of construction: 2023 Ideal machine to ensure 100% control of production in compliance with the regulations on pre-packaged products. easy and tool-free conveyor replacement various statistical functions MACHINE CHARACTERISTICS Material: frame stainless steel V2A/AISI 304 Display: 15'' color TFT display with touchscreen PRODUCTION Max output: 600 pcs/min Temperature range: +5 to +40 °C Noise level: A-weighted emission sound pressure level under 70dB(A) ELECTRICAL CHARACTERISTICS Rated frequency: 50/60 Hz Connect load (power capacity): 0.8 kVA (ca) Compressed air supply (option): 6 bar (ca) DIMENSIONS Height: 1,591 mm (ca) Length: 440 mm (ca) Depth: 900 mm (depending on configuration) Weight: 250 kg

A used Wiesheu DUO in-store baking oven B4 + B8 EM Vario from 2015 is currently for sale and immediately available in stock. The oven consists of two ovens on top of each other, a B4 oven which is for 5 trays of 60x40cm and a B8 oven which is for 10 trays of 60x40cm each. The oven has two digital controls including baking program storage. In addition, the stove is mobile on castors and has a fixed water connection. Wiesheu DUO In-store Baking Oven B4 + B8 EM Vario - Stainless steel clad - Large glass front -digital control - 5 cushions 60x40 cm (upper oven) - 8 60 x40 cm cushions (lower oven) - Mobile on swivel castors - With steam condenser Dimensions: Height: 217 cm Width: 94cm Depth: 95cm + hood 25cm Specifications Year of Make: 2015 Voltage: 400 V / 50 Hz Power: 20.8 kW Rated current 32 A

WEINIG Return Mechanization RF 902 / 15RV WEINIG return conveyor system / workpiece return WEINIG similar to NEUMANN RF24 for the return of scantlings and strips to planing and moulding machines or individual wood sanding machines (one-man operation) Specifications: Workpiece dimensions length 300 – 3500 mm Workpiece dimensions width 30 – 230 mm Workpiece dimensions thickness min. 20 mm Conveyor path cross buffer approx. 1,100 mm Driven infeed and outfeed roller conveyor pneumatically timed Working height 800 – 960 mm Drives: Roller conveyor infeed: 0.18 kW, 30 m/min, constant Cross feed motor 0.37 kW, 40 m/min, constant Roller conveyor outlet: 0.18 kW, 60 m/min, constant Cross transport dimensions: Length 2,250 mm Width 1,570 mm WEINIG intermediate conveyor belt, type LTB 250-3500, S/N 81005, year 1997 Length 3500 mm Width 250  ...

Multihead weigher make Selo as good as new with platform and ladder made of stainless steel. For general cargo or coarsely free-flowing products, output up to 100 weighings per minute depending on weight Search terms: coffee, production, industry, food, pods, nuts, pet food, pasta, instant, granules, wine gums, rice, confectionery, chocolate, cheese, bars, pasta, cereals, cosmetics, pharmaceuticals, powder, bulk goods, general cargo, capsules, tea, drugstore Search terms: coffee, production, industrie, food, pads, nuts,pet food, pasta, instant, granulate, wine gum, rice, confectionery, chocolate, cheese, bars, pasta, cereals, cosmetics, pharmaceuticals, powder, bulk goods, general cargo, capsules, tea, drugstore

MARINE GEARBOX Reference number 20104 Brand Gearbox REINTJES Model Gearbox WVS 430 Ratio 2,32:1 Power 825 KW RPM 1745 RPM Serial number 56382 General condition TAKEN OUT RUNNING EX MILITARY FAST CRAFT Status AVAILABLE SPECIFIC INFORMATION Sae housing 30 Flexible coupling YES Controls YES - INCLUDING CABLES AND ELETRONIC ACTUATOR Brackets YES Oil cooler YES Pto NO Weight (kg) 590 KG

-

; Power [PS]: 36; Gross weight [kg]: 730; Engine: Perkins 1103A-33G1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 71

MARINE GEARBOX Reference number 20105 Brand Gearbox REINTJES Model Gearbox WVS 430 Ratio 2,32:1 Power 825 KW RPM 1745 RPM Serial number 56383 General condition TAKEN OUT RUNNING EX MILITARY FAST CRAFT Status AVAILABLE SPECIFIC INFORMATION Sae housing 30 Flexible coupling YES Controls YES - INCLUDING CABLES AND ELETRONIC ACTUATOR Brackets YES Oil cooler YES Pto NO Weight (kg) 590 KG

Granulator - Wittmann S-MAX 2 / New, unused (3 pcs.) Year of construction: 2024 Description: Slow-Moving Granulator with Gearbox Power: 1.1 kW 2 stator blades, 2 x push, rotor with the milling cutters Hopper inlet: 290x280 mm Grinding chamber opening: 250x240 mm Granulator without sieve, regulation of the mill thickness by means of the hole adjustment between the milling machine and stator knife Granulate mill is used for grinding the very hard details, waste - just like the crusher Hole for material case is prepared for connection with suction conveyor All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

MARINE GEARBOX Reference number 20106 Brand Gearbox REINTJES Model Gearbox WLS 430 U Ratio 2,458:1 Power 825 KW RPM 1745 RPM Serial number 56384 General condition TAKEN OUT RUNNING EX MILITARY FAST CRAFT Status AVAILABLE SPECIFIC INFORMATION Sae housing 30 Flexible coupling Controls YES - INCLUDING CABLES AND ELETRONIC ACTUATOR Brackets YES Oil cooler YES Weight (kg) 590 KG

Granulator - Wittmann J1/CJ5 Year of Make: 2008 Description: Slow-Moving Granulator with Gearbox Power: 1.5 kW 2 stator blades, 2 x push, rotor with the milling cutters Hopper inlet: 380x330 mm Grinding chamber opening: 230x220 mm Granulator without sieve, regulation of the mill thickness by means of the hole adjustment between the milling machine and stator knife Granulate mill is used for grinding the very hard details, waste - just like the crusher Hole for material case is prepared for connection with suction conveyor All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Weima WL 4 Hackers Weima Single-shaft Shredder NEW Funnel opening with logspacer 600x1050mm Funnel content 0.6m/3 Working width of the rotor 600mm Diameter of rotor 252mm Drive power 18.5 kW Rotor speed 80-120 rpm Knife number 28 pieces Type & size of knives concave / 40 x 40 mm Sieblochung 10 - 100 mm Painting WEIMA Standard RAL 2002 / 7016 Connection value 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg 2nd knife row

Granulator - Wittmann M2/CM5 (5 pcs.) Year of Make: 2011 Description: Slow-Moving Granulator with Gearbox Power: 1.1 kW 2 stator blades, 2 x push, rotor with the milling cutters Hopper inlet: 240x210 mm Grinding chamber opening: 240x116 mm Granulator without sieve, regulation of the mill thickness by means of the hole adjustment between the milling machine and stator knife Granulate mill is used for grinding the very hard details, waste - just like the crusher Hole for material case is prepared for connection with suction conveyor All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Diesel Fuel Tank 2000 Liter, 2.000 Liter Tank, Western Global 20TCC; Gross weight [kg]: 698; Accessories: 2x in stock

Linear brush Tresy for cleaning system Wandres Technical data: • Usable width A (mm): 3200 • Order number: 6732601 • Available: 2 pieces

Horizontal borer Wotan B105Y Spindle: 120 mm Travels: -X: 3000 mm -Y: 1450 mm -Z: 1280 mm Table: -1400 x 3000 mm -Rotating part: 1130 x 1500 mm (manually rotated to any degrees) -Max load: 7 tn Machine weight: about 25 ton

Riding track planner, riding area planner, railway planner / Tennenplatz care equipment, working width approx. 1.80 m, consisting of three-point mounting frame with 2 rows of adjustable double spring tines, height-adjustable equalizing shield and screwed wear rail (steel 10x80 mm) and adjustable lattice roller (diameter approx. 400 mm) with cushioned scraper.

Bag width up to 20 cm, Bag length up to 32 cm, machine in production

Machine in running, tail end printer could be added

Automatic double copy milling machine - longitudinal copy milling machine Manufacturer: Wigo Model: 1075 Working length: Workpiece with straight end faces .. 1300mm Wersktück with rounded end faces .. 1000mm Working width: max. 200mm Working height: max. 130mm Feed continuously 0.5 - 12 m/min Milling units: 2 x 4 KW Hydraulic unit: 1.1 KW Additional 2 milling unit on the right side. Clamping cylinder pneumatic: 2 pcs.

Tier Oven Wachtel Piccolo I-6 DMS 3 Year of Make: 2016 A used electric deck oven Wachtel Piccolo I-6 with 6 shelves each 80x60cm is for sale. This oven is function-tested immediately available in stock. The oven is equipped with exhaust hood and proofer. Deck Oven Quail Piccolo I-6 DMS 3 Glass with 7-Day Clock - 6 shelves each 80x60cm - Each floor with separate controls - Top and bottom heat can be controlled separately - Each floor with a separate steam box for the generation of steam - With automatic night start function - With exhaust hood - Stove with water connection for steam - 29.3 kW - Voltage: 400V AC/3Ph/N/PE/50Hz - Year of construction: 7/2016 Shipping costs and trade-in on request.

Max. useful capacity [dm3] 170 Max. batch weight [kg] 500 Blast room inside dimensions [mm] : Ø700 x 988 Max. workpiece diagonal [mm] : 350 Max. weight per workpiece [kg] : 23 Number of blast wheels : 1 Power per blast wheel [kW] : 11 Abrasive throughput, max. [kg/min] : 180 Initial abrasive filling [kg] : 180 Air required for dust collection [m3/h] : 1 600 Installed power, approx. [kW] : 12,3 Dimensions, approx. [mm] A : 3 730 x B: 2 070 x C : 1 610 Weight, approx. [kg] : 2 300 Max. carrying capacity of loader [kg] : 500 Power of loader [kW] : 7,5 Weight of loader [kg] : 1 250

Complete clean air extraction system with briquette press and piping with gate valves, etc. Extraction system for woodworking companies with briquetting press undermounted. Aspirator ALKO Type: MOBIL-JET 250 Year of construction 2003 Extraction diameter 250 mm Nominal capacity 4900 m³/h Motor power 6.5 KW Dimensions approx. 330 x 135 x 2.95 cm with suction control for automatic slide control. Briquette press WEIMA/ ALKO Type: APC30S Year of manufacture 2007 Motor power 5.5 KW Pressing capacity 30 - 50 kg/h Briquette diameter approx. 50 mm incl. complete piping with branches, bends, valves. there would be another batch of extraction pipes with fittings, which can be purchased cheaply. Plant has been dismantled and packed ready for loading. Condition see pictures, or follow the item description. Parts can also be picked up ...

; Power [PS]: 60; Gross weight [kg]: 769; Engine: Perkins 1103A-33TG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 145

; Power [PS]: 272; Gross weight [kg]: 2035; Engine: Perkins 1506A-E88TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 528

; Power [PS]: 218; Gross weight [kg]: 1548; Engine: Perkins 1106A-70TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 394

; Power [PS]: 179; Gross weight [kg]: 1434; Engine: Perkins 1106A-70TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 327

; Power [PS]: 163; Gross weight [kg]: 1341; Engine: Perkins 1106A-70TG1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 327

2 pcs used REINTJES gearbox type WAV 1400 once left/left and one-off left/right Undertone 2,040/1

Control board for Werner & Pfleiderer Rototherm Stikkenofen Type: RZK 128

Batch container 1.500L, heatable, incl. anchor agitator