128,275 used machines on RESALE, but how to find them? Machine Search
A robot automation cell WU Mechanische Werkstätte with a Fanuc robot for product handling for a lathe is available. Gripper system: double gripper, gripper manufacturer: Schunk, robot type: Fanuc M20iA 35M, robot axes: 6, max. payload: 35kg, robot reach: 1810mm, machine dimensions X/Y/Z: approx. 1700mm/1300mm/2200mm, weight: approx. 2000kg. Lathe power-on time: approx. 34000h, servo-on time (cell): 5700h, mechanical operating hours: 615h. This is only the automation. Documentation available. An on-site inspection is possible.
MACCHI 3-LAYERS BLOWN FILM EXTRUSION LINE, for LLDPE/LDPE/HDPE, n.3 extruders with infra-red heaters (for energy saving), Screws Ø 65+80+65 mm, n.3 sliding plate screenchagers, Macchi Die head TE5303-IBC-350/500, Available dies Ø 350 and 400 mm gap 1,8 mm., IBC bubble cooling system, dual-flow, carbon fiber air ring, throughput rate up to 800 kg/h depending on material and recipe, 2.400 mm wide oscillating pull off unit, Motorized side gusseting units, Double, 2.350 mm wide fully automatic back-to-back winding station with fully automatic reel change, Max reel Ø 800 mm, including the following:, Tower, E&L Web guide, Gravimetric weight control system Piovan/Doteco, Components blander Shini, Doteco dosing units, Automatic Thickness control Kundig/K-Design Profile gauge control system, Calibrating basket, Martignoni Corona-treatment, N. 8 Air shafts, Constructed under Covid, started in ...
MACCHI 3-LAYERS BLOWN FILM EXTRUSION LINE, for LLDPE/LDPE/HDPE, n.3 extruders with infra-red heaters (for energy saving), Screws Ø 65+80+65 mm, n.3 sliding plate screenchagers, Macchi Die head TE5303-IBC-350/500, Available dies Ø 350 and 400 mm gap 1,8 mm., IBC bubble cooling system, dual-flow, carbon fiber air ring, throughput rate up to 800 kg/h depending on material and recipe, 2.400 mm wide oscillating pull off unit, Motorized side gusseting units, Double, 2.350 mm wide fully automatic back-to-back winding station with fully automatic reel change, Max reel Ø 800 mm, including the following:, Tower, E&L Web guide, Gravimetric weight control system Piovan/Doteco, Components blander Shini, Doteco dosing units, Automatic Thickness control Kundig/K-Design Profile gauge control system, Calibrating basket, Martignoni Corona-treatment, N. 8 Air shafts, Constructed in 2011 started 2012, Ex ...
Flow rate: 143 m³/h Operating pressure test: 32 bar Motor: 11 kW - With connections: suction side DN 65 and pressure side: DN 80 - With chassis mobile, 2 swivels and 2 fixed castors - With cable and CE plug 16A Dimensions: Length: 1020 mm Width: 520 mm Height: 1100 mm Note: Pump 100% tested, with function guarantee On request, infinitely variable with frequency converter for an additional cost. Connections can be changed at an additional cost.
A checkweigher with integrated metal detector Mettler Toledo is available. 1) Automatic checkweigher Mettler Toledo AdvancedLine CM3571, year of manufacture: 2020, weighing capacity: 1000g-6000g, min. weighing product: 80g, scale interval: 0.5/1g, tolerance: +/-1000g, belt speed: 35m/min, throughput: 60/min, pneumatic pressure: 400-1000kPa, accuracy class: X III (1). 2) Metal detector Mettler Toledo Profile LS Combi, year of manufacture: 2020, opening width: 350mm, opening height: 150mm, operating sequences: 100/300/800. Including infeed and outfeed conveyors, collection container, covers, FreeWeight Nt, software etc. Documentation available. An on-site inspection is possible.
Injection moulding machine Arburg 420S 1300-350 BJ 2000 without handling
Height=1.998 m, Overall length= 0.801 m, Overall width= 1.004 m, Net weight= 257 kg,
saw blade diameter: 350 mm dimensions of saw-blade: 350 x 30 x 50 mm machine weight ab.: 100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1000 kN, 127 g/PS, 35 mm
Regularly serviced machine that is always kept in top shape. The screw rotation is carried out with an electric servo motor, which is an energy-efficient solution. The rest of the machine is identical to the standard version of the 420 S. The presence of the core puller in this type is extra. Another special feature is that the injection molding unit can be moved from the center. Software and technologies can be read from a CF disk. The notification can be made in both Hungarian and German. Manuals can also be in German or Hungarian. Currently, the machine has a 35 mm auger for technical materials in good condition. A video of the operation of the machine was also created, which can also be tried out in person at our site. Please see our other ads. Information about the machines we offer and our company: - We only sell machines that are owned by us and can be purchased in our warehouse ...
formatkreissägen mit schwenkbarem sägeblatt SICAR 350 Neue Maschine Bereit zur Auslieferung SUPER RABATTPREISE mit Vorritzaggregat : Ja digitaler Neigungswinkelmesser 0° / 45° Brückenblattschutz CE-Vorschriften: JA mit Bedienungsanleitung und CE-Erklärung Volt. 380/50 Auf-/Ab- und 45°-Neigung der Sägeblätter manuell digitaler Neigungswinkelmesser 0° / 45° Brückenblattschutz schlitten mm. 3200 unabhängige Motoren hauptmotorleistung PS 7.5 motorleistung Vorritzaggregat PS 1 max. Sägeblattdurchmesser mm. 350 durchmesser Vorritzaggregat mm.120 Max. Schnitthöhe bei 45° mm. 92 Max. Schnitthöhe bei 90° mm. 120 Max. Schnittbreite an Parallelführung mm.1250 volt. 380/50
Brown & Sharp Tesa Hite 350 Digital Height Gauge 007.30041
Tip height: 355 mm Center width: 3000 mm large circulation Ø over bed/recess/bed slide: 715/790/520 mm Spindle bore: 86 mm Spindle holder according to DIN 55027: Gr. 11 Tailstock quill taper: MK 5 21 spindle speeds: 5.6 - 560 rpm 42 feeds longitudinal/flat: 0.09 - 5.6/0.045 - 2.8 mm 22 Whitwort Thread: 2 - 28 Gg 28 metric thread pitches: 1 - 14 mm 27 module thread pitches: 0.25 - 3.5 module 32 module threads: 4 - 56 module 32 Diametrical Pitch Threads: 8 - 112 DP Drive motor, pole-switchable: 380 V, 7/11 kW Weight approx.: 7 t Approx. space requirement: 6000 x 2300 mm
WASHING LINE for PLASTIC SCRAPS, for 350-550 kg/h average capacity depending on contamination and material, material loading screw conveyor with hopper, equipped with vibrating motor, made of stainless steel, stainless steel tank size 5,0 x 1,5 x 2,0 mt. complete with 2 horizontal skimming screw conveyors for material handling. 8.2 kW, 50 Hz., horizontal screw conveyor at the bottom + diagonal screw conveyor for extracting sunk material, stainless steel safeti grate on the upper part, diagonal material collection drainage screw conveyor, drying centrifuge, material extraction fan, electrical panel, the line was built in 2008 and is offered completely reconditioned
Arburg 470 C 1500-350 (2006) Working hours : only 7.113 h Clamping Force: 150 tons Tie-bar Spacing: (H × V): 470 mm × 470 mm Maximum Plate Size : 650 mm × 650 mm Minimum Mould Installation Height: 250 mm Maximum Distance between Platen (when fully open): ~750 mm Mould Opening Stroke : 500 mm Screw Diameter: 45 mm Approximate Shot Volume (Injection Volume): 230 cm³ Approximate Shot Weight (for PS): 210 g Injection Pressure: 1 670 bar Motor/Drive Power: Example listing ~ 37 kW servo/hydraulic drive power Heating Power: Example listing ~ 10.2 kW Machine Dimensions (Length × Width × Height): 5.4 m × 2.0 m × 2.2 m Machine Weight:4 500 kg
Punching force: 350 kN (holes e.g. 23 m in 12 mm material) Cuts 150 x 10 mm on the flat steel shear Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side with stop cam Range of tools is included in the price
Travel X/Y/Z: 2000mm/610mm/630mm, tool holder: SK40, spindle speed: 9000rpm, tool stations: 40, rapid traverse: 60m/min, table dimensions X/Y: 2100mm/720mm, max. table load: 1000kg. Control: Siemens Sinumerik 840D, operating hours: 18272h. Including conveyor and coolant system. Documentation available. An on-site inspection is possible.
Cone splitter JSK-350-MS01, splitting cone, drill cone, log splitter, 1x hydraulic earth boring device HBG-1500 (for mini excavator, tractor, front loader), 1x adapter, quick coupler MS-01 (for HBG-1500 and HBG-2000), 1x Jansen splitting cone, 1x jansen fixation adapter splitting cone
Key data: 350 mm, 110 mm
Like new: Saw blade: ø 350 mm Saw Capacity: 110mm Round / 100mm Square Saw Angle: 45º Left/Right Sawing speed: 18 / 36 rpm Equipped with: - Coolant system - Pneumatic clamping - Variable feed rate -Saw blade Country of origin: Germany Motor power: 1.8 kW Machine LxWxH: 800 x 1000 x 1850 mm Machine weight: 800 kg
Key data: 3500 mm, 20
HÖFLER Porta 3500 CNC Gear Grinder – As Is” with Limited Use We are offering a unique opportunity to acquire a HÖFLER Porta 3500 CNC Spur/Helical, Internal/External Gear Grinding Machine – a rare and powerful machine with low hours, available in As Is” condition at a negotiable price. Machine Overview: • Make/Model: HÖFLER Porta 3500 CNC • Year New: 2007 • Installed: 2010 • Total Hours: Only 6,800 since installation • Design: Later-generation traveling gantry • Condition: Structurally and mechanically sound, but currently not operational due to uninstalled hydraulic drive motor (refurbished and included). • A full assembly report detailing remaining work can be provided upon request. Key Specs: • Max external grinding diameter: 137.8” (3500mm) • Max internal grinding diameter: 31.5” (800.1mm) • Max tooth profile height: 3.15 ...
Year: 2019 - technically efficient, ready to work – after full service - working length: 3500 mm - adjustable leg height - roller width: 240 mm
Clamping Force: 350 ton // Shot Weight (Max): 694 g
Offer 25348 Specifications: - Plate length approx. 5500 mm - Plate width approx. 2000 mm - Plate height approx. 350 mm - Thickness of the top plate approx. 80 mm - 8 T-slots in table surface length 5500 mm - Center distance of the T-slots in the table surface 255 mm each - Center distance of the T-slots from outer edge 110 mm - T - groove width approx. 40 / 60 mm - T - groove depth approx. 62 mm - Required space L 5600 x D 2020 x H 350 mm - Weight approx. 10200 kg
Tripet TST201CNC nr 3520.17.137 BJ.1987
1 punching machine (14), manufacturer Kaiser, type KSTU 3500-25-6P, year of manufacture 2000, press force 350 t, stroke rate 20-100/min, stroke height 40 - 250 mm, ram adjustment 200 mm, installation height 700 mm, table size approx. 1,000 x 2,700 mm, control system, manufacturer Siemens, type Simatic Multipanel (retrofitted), force measuring unit, manufacturer Brankamp Marposs, type Prokos X1, two-hand operation, material discharge belt, downstream incline conveyor, coil unwinding reel, manufacturer Dreher, type 2380P, year of manufacture 2000, SN 0051, alignment unit, buffer section, belt feed, manufacturer Dreher, separate switch cabinet system, manufacturer Rittal, cooling unit, accessories: workbench, partition lighting, pull-out cabinet, swivel chair Find more here - / Contact us at -
dimensions of saw-blade: 350x32x4 mm vice: 180 mm : 1700/3400 U/min capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180x70 mm capacity 45 degrees: round: 120/110 mm capacity 45 degrees: square: 100/95 mm capacity 45 degrees: flat: 135x60 mm output: 2,2 kw weight: 225 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. saw blade diameter: 350 mm Manual material tensioner
saw blade diameter: 350 mm dimensions of saw-blade: 350 x 32 x 2,5 mm cutting diameter: 115 mm stroke: 100 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: round: rechts & links 110 mm capacity 45 degrees: square: rechts & links 95 mm capacity 45 degrees: flat: rechts & links 125 x 95 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 90 x 95 mm cutting speed: 15 / 30 / 45 / 90 m/min total power requirement: 2,6 kW weight of the machine ca.: 375 kg dimensions of the machine ca.: 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Coolant device - 2 speeds - Machine base - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
We have in stock 20 pcs, NEW CAT cylinder heads for sale AT SPECIAL PRICE. to fit 3520 CAT gas engines Part Number 415 5584 Email for Price and Photos.
General SKU218W173 LocationBarneveld MakeLauda TypeITH 350 EX Mach.No.LSI 51392 Pressure Working pressure10 Bar Main Features Heating (medium)Oil Capacity36 KW Temp.380 °C Specified Features - Temperature control unit MaterialMild steel Thermal oil heatercheck Electric heatingcheck Heating medium:Therminol 72 Heating capacity36 kW Electric capacity42,5 kW Temperature+20°C/+380°C Tank capacity60 Ltr. With pumpcheck Capacity8m³/h Motor5,5kW 400Volt With temperature controllercheck Information Year of construction2008 Total height2,0 m CEcheck Floorspace1,85x0,98 m Weight1240 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...
General SKU430W1384 LocationBarneveld MakeEdelstahlbau Tannroda Type350 l No.1765 Year of construction2017 Specified Features - Pressure vessel Material finishMirror polished Pressure Working pressure6 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume350 Ltr. Pressure6 Bar Pressure vessels MaterialStainless steel 1.4404 (316L) Notified bodyClosed Capacity450 l., (350 l.) Vessel sizesDia. 800x800 mm Dished bottomcheck ManholeDN400 Top connectionscheck OutletDN30 Max. temperature-20°C/+200°C Information Mounted on legscheck and wheels Weight500 kg CEcheck Floorspace1,10x1,10 m Total height1,70 m Extra Specifications- mirror polished inside - pressure gauge attached Pressure vesselsEdelstahlbau TannrodaTanks > Pressure vesselsBrand > Edelstahlbau Tannroda What you can expect from Foeth: -- Machine is ...
General SKU354T960 LocationBarneveld MakeClima Temperatur Systeme TypeC+10/350/S No.007147 Year of construction2001 Pressure Working pressure25 Bar Main Features MaterialStainless steel Volume338 Ltr. Max.temp.90 °C Specified Features - Drying oven Climate boxcheck Temperature Test Chambers Max. temperature90 °C Capacity338 Ltr, (quantity: 0,9 kg) Internal width645 mm Internal depth710 mm Internal height740 mm Steam heatingcheck Electric capacity3,2 kW Number of doors:1 With air circulationcheck With fancheck With trayscheck MaterialStainless steel Information Total height1,9 m Weight400 kg CEcheck Floorspace0,85x1,7 m Extra SpecificationsTemp. bereik: 10-90 °C Vochtigheidsbereik: 10-95%rF Dauwpunt vereist 1: 5-89 °C Dauwpunt vereist 2: -19-5 °C Drying ovensCTS Clima Temperatur HechingenDryers > Drying ovensBrand > CTS Clima Temperatur Hechingen What ...
General SKU345S703 LocationBarneveld MakeKresta No.94071-10 Year of construction1994 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume350 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel Notified bodyTÜV Capacity350 Ltr. (250 Ltr. netto) Vessel sizesdia. 750x1020 mm Dished topcheck Dished bottomcheck Top connectionsDN50 (3x) OutletDN40 Max. temperature0/-25 °C (design: -30/200 °C) With jacketcheck (40 Ltr.) Max. temperature0/-25 °C (design: -30/200 °C) Information Mounted on legscheck Weight300 kgPressure vesselsKrestaTanks > Pressure vesselsBrand > Kresta What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinati ...
General SKULT009 LocationGermany MakePharmatec GmbH TypeFluent Tank No.12563 Year of construction2021 Specified Features - Pressure vessel Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume350 Ltr. Pressure3 Bar Vacuumcheck Pressure vessels MaterialStainless steel 1.4404 (316L) Capacity350 Ltr (460 Ltr) Vessel sizesdia.791 x696mm Dished topcheck Dished bottomcheck With covercheck OutletG1 Max. temperature-10/95°C. With propellor stirrercheck Magnetic ZETA, Type BMRT 125 PI Ex S Dk Y Motor0,18kW, 230/400V, 2825rpm (EX) With variable speed drivecheck Speed mixing shaft75-540 rpm Information With switchgearcheck Total height+/- 1,7 m CEcheck Mounted on legsplatform With switchcheck Extra SpecificationsThe tank is equipped with pressure gauge, temperature sensor and level switch ...
General SKU307X459 LocationBarneveld MakeGauthier No.685 Year of constructionunknown Pressure Working pressure3 Bar Main Features MaterialStainless steel Surface0.15 m2 Specified Features - Horizontal plate filter Plate filtercheck Horizontalcheck Filter surface0,15 m² Number of platens9 Platen sizesDia. 430 mm Top connectionscheck Solids outletDN25 Liquid outletDN25 With jacketcheck MaterialStainless steel 1.4306 (304L) Information Mounted on wheelscheck Total height1,40 m Weight350 kg Floorspace0,65x1,10 mHorizontal plate filtersGauthierFilters > Horizontal plate filtersBrand > Gauthier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more mach ...
General SKU293X474 LocationBarneveld MakeATML LifeSciences TypeMM-JTBB360 No.MM-JTBB360-0001 Year of construction2013 Main Features MaterialStainless steel Volume350 Ltr. Motor0.13 KW Specified Features - Stirring vessel MaterialStainless steel 1.4404 (316L) Open stirring vesselcheck Capacity350 l. Vessel sizesDia. 745x855 mm With jacketcheck With propellor stirrerMagnetic mixer Motor130 watt, 230 volt, 3000 rpm Speed mixing shaftVariable Information Mounted on legscheck and wheels With switchgearcheck Weight250 kg CEcheck Floorspace1,50x1,0 m Total height1,36 m Extra SpecificationsWith disposable mix bags, volume 350 l.Stirring vesselsATMI LifeSciencesStirring vessels > Stirring vesselsBrand > ATMI LifeSciences What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worl ...
General SKU293X475 LocationBarneveld MakeATMI LifeSciences TypeMM-JTBB360 No.MM-JTBB360-0002 Year of construction2013 Main Features Volume350 Ltr. Motor0.13 KW Specified Features - Stirring vessel MaterialStainless steel 1.4404 (316L) Open stirring vesselcheck Capacity350 l. Vessel sizesDia. 745x855 mm With jacketcheck With propellor stirrerMagnetic mixer Motor130 watt, 230 volt, 3000 rpm Speed mixing shaftVariable Information With switchgearcheck Weight250 kg CEcheck Mounted on legscheck and wheels Extra SpecificationsWith disposable mix bags, volume 350 l.Stirring vesselsATMI LifeSciencesStirring vessels > Stirring vesselsBrand > ATMI LifeSciences What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The N ...
General SKU397X1104 LocationBarneveld MakeLauda TypeSUK 350 W Mach.No.HSK07001 Pressure Working pressure10 Bar Main Features Heating (medium)Steam Capacity25 KW Temp.70 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck Heating medium:Water / Glycol 80:20 Heating capacity25 kW Electric capacity51 kW, 400 volt With coolingcheck Capacity15 kW at 0 °C Temperature0/70 °C Tank capacity30 Ltr. With pumpcheck Capacity6 m³/h Motor3 kW With temperature controllercheck (PID controller SR 500 - as is) Information Year of construction2007 Mounted on framecheck Total height2,24 m CEcheck Floorspace1,2 x 1,9 m Weight1100 kg Extra Specifications Connections (outflow/return): :DN 32 Compressor: Hermetic piston compressor Delivering pump: 6 m³/h Pump motor: 3 kW Filling volume (heat carrier circuit): approx. 30 L Refriger ...
General SKU397X1129 LocationBarneveld MakeLauda TypeSUK 350 W Mach.No.B14 730 Pressure Working pressure4 Bar Main Features Heating (medium)Electric Capacity44 KW Temp.80 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck Water heatercheck Heating medium:Water/Glycol (1:1) Heating capacity1 m³/h Electric capacity44 kW, 400 volt With coolingcheck (Water) Capacity12 kW at +10 °C Temperature0/80 °C Tank capacity60 Ltr. With pumpcheck Capacity3 m³/h Motorcheck With temperature controllercheck (PID controller - as is) Information Year of construction2003 Mounted on framecheck With switchgearcheck Total height2 m CEcheck Floorspace1,14 x 1,5 m Weight950 kg Extra Specifications Connections (outflow/return): :Flanges DN50: PN16: DIN 2633 Compressor: Semi-hermetic reciprocating compressor Delivering pump: Grundfos C ...
Key data: 4000 kN, 763 g/PS, 60 mm
Year of Make: 2000 Clamping force: 400 tons. Shot volume: 848 cm³ Screw diameter 60 mm Injection pressure increased: 2,421 bar Good condition, immediately available
Simimpianti 3500×1300 veneer shelf press Shelf length 3500mm Shelf width 1300mm Two Batches Press on 8 cylinders Shelves heated with CO water Operating pressure max 300bar Piston diameter 80mm Machine Weight 7000kg Machine dimensions 435x160x235cmH Net price 65,000zł
Engine Brand: SISU, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 3 , Flywheel SAE: No Flywheel , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 138 Kw, Rated Speed: 2200 Rpm, Injection Type: Electronic Fuelpump (EDC) , , https://hamofa.hamofa-bb.be/stock/diesel-engines/sisu-sisudiesel-74-35 9-eta-4v-new/42287, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.386 kg, Type number: SISUDIESEL 74 .359 ETA-4V
Engine Brand: CUMMINS, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/cummins-isb4-5-cpl-3542-ne w/832, , = More information =, , Type: Engine, Empty weight: 430 kg, Type number: ISB4.5 CPL 3542
Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: Yes , Starter Voltage: 24 Volt , Rated Power: 671 Kw, Rated Speed: 1200 Rpm, , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-lle-2644 644-used/22410, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 5.500 kg, Type number: LLE-2644644
Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 639.8 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: EXTERN WATERCIRCUIT GEKOELDE INTERKOELER , Nominal Rpm @ Nominal Power: 1750 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 746 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508b-2gr-1953 816-used/688, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 4.000 kg, Type number: 2GR-1953816
Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Flywheel Housing SAE: SAE 00 , Flywheel SAE: Unknown , Working Hours: 26381 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 682 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508-s2a-232-2 464-used/109, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 4.550 kg, Type number: 3508 S2A 232-2464
Engine Brand: CATERPILLAR, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 671 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-lle-2644 644-new/137, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: LLE-2644644; Transport weight [kg]: 5500
Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: Yes , Starter Voltage: 24 Volt , Rated Power: 671 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-lle-2644 644-used/22418, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: LLE-2644644; Transport weight [kg]: 5500
Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 707.7 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: WATERGEKOELDE INTERCOOLER , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Working Hours: 23544 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 884 Kw, Rated Speed: 1200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3516-71z-1w422 2-used/434, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 71Z-1W4222; Transport weight [kg]: 7710
Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 723.3 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: LUCHTGEKOELDE INTERCOOLER , Nominal Rpm @ Nominal Power: 1750 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Revisie rijp , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c32-ljw-353864 5-used/759, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: LJW-3538645; Transport weight [kg]: 3500
Engine Brand: CATERPILLAR, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 671 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-lle-2644 644-new/136, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: LLE-2644644; Transport weight [kg]: 5500
maximum number of results exceeded
please refine your search
