w 35 used for sale

DME Small Keg Washer - Second Hand CAPACITY: Fills up to 20 or cleans up to 14 kegs per hour (2 station) Fills up to 40 or cleans up to 28 kegs per hour (4 station) SPECIFICATIONS: Individual on / off valves allow filling of one to two or to four kegs (depending on head capacity) at the same time 3600 RPM s/s pump mounted on cart CO2 manifold with valved inlet / outlet and pressure gauge All stainless steel manifolds Portable stainless steel cart with locking casters Motor starter, on/off switch, 20 ft (5m) cord Keg cleaning support racks at 3'6" (1.070m) Counter pressure manifold with bleed off 1 ½” tri clamp connector for kegging tank outlet to filler hose This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

General SKU293X467 MakeMiele LocationBarneveld CEcheck TypeG7826 Main Features MaterialStainless steel Motor10 KW Specified Features - Miscellaneous MaterialStainless steel Motor10 kW, 400 volt Information No.00/74340434 Year of construction2009 Floor space0,90x0,80 m Total height1,95 m Weight505 kg Extra Specificationsusefull size inside chamber: 600x560x650 mmMiscellaneousMieleMiscellaneous > MiscellaneousBrand > Miele What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU339W1461 MakeCRS ( refurbished bij Pfaudler) TypeAE4000 No.32050621 Year of construction2000 ( refurbished 2019) LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume4000 Ltr. Specified Features - Glass-lined Reactor MaterialGlass - Enamel Glass Reactors Reactorcheck Capacity4000l Vessel sizes1800x2200 mm Dished bottomcheck Dished top sidecheck ManholeDN500 Top connectionscheck Outletcheck With jacketcheck Max. temperature-25/+200°C Information Floorspace2x2 m Total height2,5 m Extra Specificationsthis item is the body with: 2x AE4000 3-blade reteit curve stirrer 1x AE4000 anchor stirrer 2x AE4000 Beavert tail type w/tantalum tip baffles Reglassed base unit. Glass-lined ReactorsPfaudler-werkeReactors > Glass-lined ReactorsBrand > Pfaudler ...

Manufacturer: Wagner Type of machine : Powder Coating System Year of Manufacture: 2000 The powder system consists of the following individual components: - 1x Powder coating booth – FBC – plastic booth with discharge conveyor - Cabin extraction system – 1x monocyclone 1x closed post-filter - 2x powder collection containers - 1x Powder Center - PZ - 2008 with its own extraction system - 8x Automatic Powder Guns – PEA – T2 - 2x hand powder guns – PEM – T2 - Control unit for automatic pistols – 8x PM 401 pneumatic module 1x PG 650 control module - 2x Control for handguns – EPG – 2007 in Tribo mode - 2x lifting devices – EBA – 3 - 2x electric sliding unit – VT – 1400 - Light strips – height + gap + depth - 1x external safety device – fire detection (Minimax company) - Find more here - / Contact us at -

x-travel: 4216,0 mm y-travel: 2007,0 mm z-travel: 305,0 mm control: CNC table-size: 4902,0 x 2134,0 mm max. workpiece weight: 1465 kg / m² machine weight ab.: 2500 kg total power requirement: 30 kW dimensions of the machine ca.: 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel hig ...

diameter: 315 mm bore: 95 mm tool adaptor: Din 55027 Gr. 8 revolutions per minute: max. 1500 U/min Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1200 mm width: 500 mm floor-plate height: 105 mm weight of the machine ca.: 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Rectifier required. 110 volts, 2.86 amps. Reduced special price. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used deck oven WACHTEL, type: Infra -In bakery condition- - 5 stoves of 1.8 x 0.8 m each - 8m² baking surface - Digital control - Complete in one piece (not disassembled) - Assembly on request - Condition: good, ready for immediate use - Technically everything tested and cleaned The oven is in good condition and is ready for immediate use. On request, we can set up the stove on site. A complete overhaul is of course also possible.

Inv. Num. : 8905 Type: LF 3015 E Producer: G-WEIKE Created: 2022 Parameters: Operating hours: 900 h Laser power: 1.5 kW Work table length: 3000 mm Work table width: 1500 mm Maximum sheet metal cutting thickness (steel): 10 mm Source: CWFL-1500 Equipment: Cover (including glass)

General SKU321T836 LocationBarneveld MakeDMN Westinghouse TypeAL 150/2MZC Main Features MaterialStainless steel Motor0.37 KW Inlet diameter150 mm Specified Features - Rotating valve MaterialStainless steel 1.4408 Rotary valvecheck Rotor with scraperscheck Number of locks:9 Inletdia. 150mm Outletdia. 150mm With motor0,37 KW, 230/400 Volt Rotor speed25 rpm Air purged sealingscheck Capacity± 3000 Ltr./h Information No.3738-01 / 96.2768 Year of construction1996Rotating valvesDMN WestinghouseRotary valves > Rotating valvesBrand > DMN Westinghouse What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

An untested conventional turret lathe WMW with extensive accessories is available. Machine dimensions X/Y/Z: approx. 2500mm/1600mm/1200mm, weight: approx. 2000kg. An on-site inspection is possible.

turning diameter over bed: 630 mm turning diameter over slide rest: . mm turning length: 3150 mm hollow: mm Number:: 16304188/ turning diameter: mm weight: 4,8 t The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU366W1287 LocationBarneveld MakePfaudler-werke Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Motor5.5 KW Surface1 m2 Specified Features - Nutsche filter MaterialGlass - Enamel Nutsche filtercheck Filter surface1m² Capacity903 l. Vessel sizesdia. 1000x900mm Top connectionscheck With jacketcheck Max. temperature-10/+200°C With stirrerHastelloy C22 Motor5,5kW, 400V, 1440rpm, (EX) Stirrer speed153rpm Stirrer can be liftedcheck With hydraulic unitcheck Hawe hydraulik, typ R3,6/B, with 2,2kW motor Information TypeDF 1000 Mach.No.44667 Year of construction1987 Mounted on legscheck Floorspace1,0x1,0 m Total height0,9 m Weight1650 kg ATEX compatiblecheck Technical specs Extra informationVolume 122 l. allowable temperature -10Nutsche filtersPfaudler-werkeFilters > Nutsche filtersBrand >  ...

Height 1300 mm Width 800 mm Length 1200 mm Electrical Supply: 400V 50Hz 3N Total power 7.5 kW Main Material Stainless Steel, Acid Resistant No loading, possibility to buy additional pole loading for the machine Throat diameter 114 mm Wolf type Angled wolf Auger Stuffing Feeding System Hopper Throat Workmanship Stainless Steel Material of the feeding screw Stainless steel, acid-resistant

1 numbering stamp

Woodmizer EG100 double edger, built in 2019, standard equipment, 8 kW, 2 saw blades, 512 kgPrices subject to change, errors, printing and typesetting errors excepted

Woodmizer log band saw, built in 2022, incl. pre-cutter, electric height adjustment, electr. Feed, 900 mm max. log diameter, 11 kW, 10 m cutting length, 1000 kgPrices subject to change, errors, printing and typesetting errors excepted

Double edger Woodmizer EG300, built in 2019, good conditionTechnical data:Passage width 550 mmCutting height 60 mmMinimum cutting width 60 mmMaximum cutting width 410 mmWidth adjustment ElectricMinimum board length 700 mmSaw blade diameter 2 x 350mmMotor 15 kWFeed speed Infinitely variable 0 to 25 m/minMachine length with tables 4900 mmMachine width 1630 mmMachine height 1250 mmWorking height 900 mmWeight 988kgPrices subject to change, errors,

Double edger Woodmizer EG250, as good as new, max. 80 operating hours, 15 KW, saw blades, infinitely variable feedPrice subject to change, errors, printing and typesetting errors excepted

Double edger EG100, built in 2022, very good condition, max. board thickness 50 mm, max. trimming width 300 mm, 7.5 kW, 2 knivesPrices subject to change, errors, printing and typesetting errors excepted

Manufacturer: Wuxi Model: MYJ-300TB Year of Manufacture: 2024 Find more here - / Contact us at -

Two lead and feed screw lathes by Weiler are available. 1) Weiler Condor VS-2, distance between centers: 800mm, center height: 155mm, swing diameter over bed/cross slide: 330mm/160mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 1900mm/900mm/1500mm. 2) Weiler Praktikant M, distance between centers: 650mm, center height: 160mm, swing diameter over bed/cross slide: 320mm/175mm, machine dimensions X/Y/Z: approx. 1700mm/1000mm/1700mm, weight: approx. 700kg. Both machines show isolated individual functional limitations, but are operational. Documentation available. On-site inspection is possible.

A two-station crimping and blocking machine Theo Leibrock is available. Stations: 2, processed materials: leather/leather composites/upper materials/thin plastics, machine dimensions X/Y/Z: approx. 1000mm/1000mm/1750mm, weight: approx. 400kg. Documentation available. On-site inspection is possible.

High-pressure pump in the container with ES 2 control – immediately ready for use For sale is a powerful high-pressure pump in a container, equipped with ES 2 control. The system is technically tested and 100% ready for use. Technical data: Machine number: A8.01174.xxxx WP 2250 / 2500 bar Flow 38 /34 lpm Registration date: 10/2008 Total operating hours: 11,960 h Drive: Caterpillar C7 engine Power: 186 kW Engine completely renewed at 10,350 operating hours High Pressure Pump: Sleeves and pistons operating hours: 2,870 h Condition & Notes: Used, technically flawless Regularly serviced Ready to use Ideal for industrial high-pressure and cleaning applications Financing: Financing possible (by arrangement)

KG Wetter SM 45 T2M, completely overhauled

KG Wetter SM 65 T2M, completely overhauled

WOMA 325 Z P30 high-pressure system – 1000 bar – replacement engine Scania – ready for use For sale is a WOMA 325 Z P30 high-pressure plunger pump, installed in a MAN vehicle. The system is 100% operational, technically and visually very well maintained. The machine is equipped with a Scania DS11 replacement engine (see nameplate). Robust, proven technology – ideal for demanding industrial cleaning jobs. Technical data: Pump manufacturer: WOMA Type: 325 Z P30 Max. operating pressure: 1,010 bar Flow rate: 134 l/min Speed: 1,800 rpm Plunger Ø: 30 mm Power consumption: approx. 230 kW Drive: Scania Replacement Engine (DS11) Installation: MAN vehicle Operating hours: approx. 13,649 h Condition: Fully functional very neat overall condition Ready to use No known defects The facility is ideal for: industrial high-pressure cle ...

Pall Supradisc Filter - Secondhand, Unused Item: Manufacturer: Pall Corporation Type: SUPRADISC Model: WSFZ161 (038.161.1) Year of Manufacture: 2021 Made in Germany This is a secondhand item that remains completely unused since purchase in 2021. All components are present and correct. (Offered in "As-is" condition) This is a SECOND HAND ITEM and is sold as is For more information and more available stock please visit us at - advancedbrewing.co.uk

bore capacity in steel (diameter): 32 mm arm length: 950 mm turning speed range: 51 - 1000 U/min turning speeds steps: 12 bore spindles - Morse Taper: MK 4 quill stroke: 160 mm feed range: 0,075 x 0,3 mm/min table surface area: 1200 x 510 mm total power requirement: 2 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 1,8 x 1,2 x 2,25 m High-speed radial end mill with - Thread cutting attachment - Vertical table 750 x 620 mm - Horizontal table 1200 x 510 mm - Emergency stop device - Documentation Machine-No. 445 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.63 m, Overall length= 0.96 m, Overall width= 1.06 m, Net weight= 329 kg,

Key data: 105 mm, 2500 mm, 1850 mm

CNC Heidenhein TNC 124 table 1750 mm x 2000 mm spindle dia. 105 mm x - 2500 mm, y - 1850 mm, z- 1400 mm, w - 700 mm

Whirlpool Vessel, fitted with stainless steel hinged lid. Approx. 2000Litres Tangential inlet with 1.5" RJT male inlet point. Three separate take off points with 1.5" RJT male butterfly valves. Insulated and clad in fully stainless steel. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Type: KB600LB Serial number: 409.11.1 Year of construction: 2011 Belt width: 700 mm Model: 90 degrees, right hand side Radius: 1200 mm Power: 3 x 400V, 50Hz, 0.2kW Dimensions: 2200 x 1050 x 1100 mm

This Hyundai Wia SE2200LMSC Lathe was manufactured in the year 2021 in Korea and has 3316 production hours, of which 538 are spindle hours. It is equipped with a Hyundai Fanuc i Series Smart Plus control unit. The machine has a spindle speed of 3500 rpm.

This WAGNER WDE 500 was manufactured in 2007. A robust horizontal turning machine, it offers reliable performance for various machining tasks. Consider the opportunity to buy this WAGNER WDE 500 horizontal turning machine. Contact us for more information.

This 4-axis Hyundai Wia LM 1800TTSY horizontal turning machine was manufactured in 2021. It features a slant bed lathe with main and counter spindle, two turret heads, and Y-axis with driven tools. Equipped with a Fanuc F31i A control, it supports a turning diameter of 230 mm and a length of 673 mm. If you are looking to get high quality turning capabilities consider the Hyundai Wia LM 1800TTSY machine we have for sale. Contact us for more information.

This lathe was manufactured in 2017. The DMG MORI WASINO G 100 | 300 features a maximum turning diameter of 285 mm and a standard diameter of 60 mm. It supports bar work up to 38.1 mm and offers rapid traverse rates of 12000 mm/min on the X-axis and 20000 mm/min on the Z-axis. With a spindle speed up to 6000 min⁻¹, this machine is ideal for efficient operations. For more information about this lathe, please reach out to us.

This Weiler E30 was manufactured in 1990. A robust horizontal turning machine featuring a spindle bore of 42mm and a swing diameter over bed of 330mm. It supports a wide range of thread cutting, from metric to DP thread, and includes a Multifix holder B. Ideal for detailed and versatile turning operations. Contact us for more information about this machine.

This HYUNDAI WIA L300 LMC Lathe was made in 2019. It is equipped with a Siemens Sinumerik 828D control unit. The machine has a spindle speed of 3000 rpm.

This Vertical Machining centre Hyundai Wia F500D was manufactured in the year 2012 in South Korea ans has 8508 operating hours. It is equipped with a Fanuc i Series. The machine includes a through-spindle coolant capability and a chip conveyor. The technical documentation and electrical schematics are available.

This 6-axis Warcom LOGICA 1250-60 press brake was manufactured in 2023. Consider the opportunity to buy this Warcom LOGICA 1250-60 press brake. Contact us for more information.

This 5-axis Hyundai Wia HI-MOLD 750-5A vertical machining centre was manufactured in 2014. It features a spindle speed of 20,000 RPM, a tool magazine with 30 slots, and a rapid traverse rate of 50 m/min in all axes. The table can handle up to 500 kg, tilting from +30˚ to -120˚. Consider the opportunity to buy this Hyundai Wia HI-MOLD 750-5A vertical machining centre. Contact us for more information about this machine.

This 3-axis Enshu WE30Ve was manufactured in 2016. A vertical machining centre designed for precision and efficiency, its ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Enshu WE30Ve machine we have for sale. Contact us for more information about this machine.

This 3-axis Hyundai WIA F500 + was manufactured in 2019. It features a Siemens SINUMERIK 828D control unit, a spindle speed of up to 8,000 rpm, and a spindle motor power of 15/11 kW. The machine includes a CNC vertical machining center, chip conveyor, automatic tool changer, and internal cooling system. If you are looking to get high-quality milling capabilities, consider the Hyundai WIA F500 + machine we have for sale. Contact us for more information.

This 3-axis Hyundai WIA KF 5600 vertical machining center was manufactured in 2018. It features a 30-position automatic tool changer, a high-speed spindle at 15,000 rpm with BBT40 taper, and advanced Siemens software options including 3D simulation and real-time machining recording. Ideal for precision machining with its equipped glass rods for accurate measurements. Consider the opportunity to buy this Hyundai WIA KF 5600 vertical machining center. Contact us for more information about this machine.

This 4-axis WAGNER VMC 1400 was manufactured in 2007. It features a spindle power of 28 kW, maximum spindle torque of 230 Nm, and a spindle speed up to 4000 rpm. It includes a 4th axis for machining workpieces up to 1100 mm. Ideal for complex machining tasks. Contact us for more information about this machine.

This 5-axis Hyundai Wia Hi-MOLD 560/5A vertical machining centre was manufactured in 2014. It features a table size of 1,250×600 mm, a maximum load capacity of 800 kg, and a high-speed spindle with 24,000 RPM and 33 kW power. The machine offers rapid feed rates of 50 m/min in all axes and a quick tool change time of 5.5 seconds. If you are looking to get high-quality milling capabilities, consider the Hyundai Wia Hi-MOLD 560/5A machine we have for sale. Contact us for more information.

This 3-axis WEMAS VZ 860 APC vertical machining centre was manufactured in 2011. Ideal for precision machining, it features robust construction and reliable performance. Consider the opportunity to buy this WEMAS VZ 860 APC vertical machining centre. Contact us for more information.

This 3-axis Vision Wide SE-2112 CNC milling machine was manufactured in 2018. Ideal for precision milling, it offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the Vision Wide SE-2112 machine we have for sale. Contact us for more information.

This SELCO WNTR 710 panel saw was manufactured in 2011. Designed for precision and efficiency in panel cutting, it offers robust performance for woodworking professionals. Consider the opportunity to buy this SELCO WNTR 710 panel saw. Contact us for more information.