w 35 used for sale

X axis dimension 1100 Y axis dimension 1400 Z axis dimension 3000 Other lifting capacity 8 Torsion axles B

X axis dimension 1105 Y axis dimension 1400 Z axis dimension 3000 Other lifting capacity 8 Torsion axles B Drive servo

X axis dimension 800 Y axis dimension 1400 Z axis dimension 3500 Other lifting capacity 8 Torsion axles C Drive servo

X axis dimension 550 Y axis dimension 1400 Z axis dimension 2500 Other lifting capacity 10 Torsion axles C Drive servo

X axis dimension 900 Y axis dimension 1600 Z axis dimension 2000 Other lifting capacity 20 Torsion axles B i C Drive servo

X axis dimension 900mm Y axis dimension 1800mm Z axis dimension 3500mm Other Torsion axles B i C Drive servo

Wittmann W828-0295 X-axis dimension 1100 mm Y-axis dimensions 1200 mm Z axis dimension 2500 mm Lifting capacity 8 kg B-steering axles Servo drive

Wittmann W828-0282 X-axis dimension 1100 mm Y-axis dimensions 1200 mm Z axis dimension 2500 mm Lifting capacity 8 kg B-steering axles Servo drive

Wittmann W828-0342 X-axis dimension 1105 mm Y-axis dimensions 1400 mm Z axis dimension 3000 mm Lifting capacity 8 kg B-steering axles Servo drive

Wittmann W828-0341 X-axis dimension 1105 mm Y-axis dimensions 1200 mm Z axis dimension 2500 mm Lifting capacity 5 kg B-steering axles Servo drive

Wittmann W832-0672 X-axis dimension 900 mm Y-axis dimensions 1600 mm Z axis dimension 2000 mm Load capacity 20 kg Steering axles B and C Servo drive

Wittmann W828-0438 X-axis dimension 1105 mm Y-axis dimensions 1400 mm Z axis dimension 3000 mm Lifting capacity 8 kg B-steering axles Servo drive

Wittmann W828-0437 X-axis dimension 1105 mm Y-axis dimensions 1200 mm Z axis dimension 2500 mm Lifting capacity 8 kg B-steering axles Servo drive

Wittmann W828-0344 X-axis dimension 1105 mm Y-axis dimensions 1400 mm Z axis dimension 3000 mm Lifting capacity 8 kg B-steering axles Servo drive

Wittmann W828-0343 X-axis dimension 1105 mm Y-axis dimensions 1200 mm Z axis dimension 2500 mm Lifting capacity 8 kg B-steering axles Servo drive

Wittmann W828-0283 X-axis dimension 1100 mm Y-axis dimensions 1400 mm Z axis dimension 3000 mm Capacity 8 B-steering axles Servo drive

Wittmann W811-0766 X-axis dimension 620 mm Dimensions of the Y-axis 1000 mm Z axis dimension 1500 mm Capacity 5kg C-steering axles Servo drive

Wittmann W832-0578 X-axis dimension 900 mm Y-axis dimensions 1600 mm Z axis dimension 2000 mm Load capacity 20 kg Steering axles B and C SERVO drive

Wittmann W832-0549 X-axis dimension 900 mm Y-axis dimensions 1600 mm Z axis dimension 2000 mm Lift capacity 15 kg Steering axles B and C Servo drive

Wittmann W828-0296 X-axis dimension 1100 mm Y-axis dimensions 1400 mm Z axis dimension 3000 mm Lifting capacity 8 kg B-steering axles

X axis dimension 550 Y axis dimension 1200 Z axis dimension 2500 Other lifting capacity 10 Torsion axles c Drive servo

X axis dimension 1105 Y axis dimension 1200 Z axis dimension 2500 Other lifting capacity 5 Torsion axles B Drive servo

Double line for washing and disinfection - STEAM The lines consist of a tipper, inspection tables, washing machines and receiving tables. Water tanks 2x 500L Productivity: 50-1200kg/h

With Elin 55kW electric motor, 1480 rpm

The machine is fully functional, with a rich set of tools. Pipe bending tools: fi 83 - R300 fi 88.9 - R300 fi 101.6 - R250, R400 fi108 - R450 fi 114.3 - R550 fi 133 - R400 fi 137 - R500 fi 168 - R700 fi 193 - R600 fi 219 - R640, R800

It is a single-shaft batch mixer made by WAM in 2007, which was used for the production of hand washing paste.

This Wagner WPB 340 A Sawing machine was manufactured in the year 1993.

This WICKERT WKP 2000/5/5 Other (IMM) machine was manufactured in the year 1993 in Germany. It is equipped with a Siemens PLC S5-100 U control unit. The machine disposes of a display control OP 396, an upper hydraulic lifting unit, a heating rod group monitoring, an automatic discharge device for FT1, an extended protective grid system and an additional tool temperature display.

This WICKERT WKP 2560/5/5 was manufactured in 1996 in Germany. It is equipped with Siemens PLC control S5. This machine has a pressure capacity of 2560kN. Its pressing area is 500x500mm. It has a piston stroke of 500mm and a piston diameter of 290mm. Contact us anytime for further information.

Tailstock stroke max. 130 mm Specifications: Turning diameter max. 360 mm Turning diameter over support 180 mm X-axis travel 230 mm Z-axis travel 620 mm Control SINUMERIK 828 D Spindle bore 40 mm Weight approx. 1600 kg Dimensions (LxWxH) approx. 2510x1670x2050 mm Year of construction 2014

Description Sprue Taker Manipulator X axis: 100 mm Y axis: 700 mm Z axis: 45°- 90° Engines: no - Pneumatic axles Gripper rotation: Yes together with Z axis Clamp tipping: No Sprue clamp: Yes Voids: 1 Gripper control: Yes Euromap 12

total power requirement:0,2 kW weight of the machine ca.:30 kg dimensions of the machine ca.:0,4 x 0,3 x 0,3 m

pressure:160 t throat:360 mm stroke:500 mm Documents:vorhanden

Equipped with 24-way tool change magazine; including cooling and filter installation

Equipped with 24-way tool change magazine; including cooling and filter installation

With accessories

Equipped with 24-way tool change magazine; including cooling and filter installation

X-axis: 55mm, B-axis: 137°, C-axis: 360mm, with robot, part recognition, pallet changer, measuring control, grinding wheels, rams and dressing pots, an inspection is possible.

curved conveyor belt bend 90? width carpet 500 mm total width 700 mm min/max height 890/990 mm length inner size 2800 mm engine 0.55 kW

Working width: 2000mm, max. roll diameter: 800mm, length: 2700mm, width: 1250mm, height: 2050mm, weight: 250kg, with documentation, light table for transmitted light, light from above, winding and unwinding, side shift during winding, winding speed adjustable and counter, an on-site inspection is possible, has been regularly serviced, no videos available.

Volume flow: 3000m³/h, coolant capacity: 20kg, coolant output: 43.8kW, weight: 1.27t.

Wartsila 3.9 MW/50Hz Gas Generating Set 12V34SG with CHP Auxiliaries This power plant was built by Wartsila in end of year 2010 and it was commissioned in 2011 as a turn-key project with heat recovery system for 10 bar steam production. Fuel used in this plant was normal natural gas fed from a local pipeline. The plant was operated till 2021 having total operating hours 43’767 till shutting down. Complete plant with step up transformer, lube oil system, control panels, and synchronizer panel, USP systems, operating monitors, MCC, start system and air compressors, HRCS for 10 bar steam, exhaust system, 6 kV Vacuum breaker with synchronisation, manuals and drawings. Plant is still installed, and electric power is still connected to all devices. Wartsila Service has made all scheduled services for this engine, last 40’000-hour service just 3000-hour prior operation closing in 2021.  ...

Mixer for the soap industry. Volume: 1063l, dimensions X/Y/Z with frame: approx. 3000mm/2800mm/2800mm, weight with frame: approx. 3000kg, weight without frame: approx. 2000kg. On-site inspection is possible.

amount: 107 STK Change gear set for Reishauer NRK. Change gears - number of teeth: - 26 / 28 / 28 / 32 /39 / 40 / 41 / 42 / 42 / 42 / 45 / 45 / 47 / 47 / 48 / 48 / 49 / 50 / 50 / 50 / 50 / 51 / 52 / 56 / 56 / 57 / 60 / 60 / 62 / 63 / 63 / 63 / 64 / 70 / 72 / 74 / 75 / 76 / 77 / 80 / 80 / 84 / 90 / 105 / 112 / 112 / 127 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Connector, plug, sensor module -Manufacturer: Wago, connector Winsta ECBT2 25 pieces -Connector: Wago 3-pin with strain relief housing -Quantity: 6x box with 25 pieces available -Price: per box -Dimensions box: 200/185/H55 mm -Weight: 0.6 kg/carton

Description: Additional information: Shaft vice + prism, - ideal for drilling and simple milling work, - can be used in horizontal and vertical positions, - V-block and jaw inserts hardened and ground, robust cast iron design, technical details: jaw width 110 mm, quantity 1 piece Approx. Onsite Dimension. (l x w x h): 250 x 200 x 180 mm, weight approx.: 30 kg

USED WAGNER WMC 1400, PRODUCED IN 2013, IN A VERY GOOD CONDITION, UNDER POWER. SPECS: - max. X/Y/Z axis travels: 1400/700/600 - work table dimensions: 1550 mm x 700 mm - max. workpiece weight: 1000 kg - max. spindle speed: 8000 rpm - control: Siemens Sinumerik 828 D. machine still in use.

Description: Bench drill CE-tested spindle hood. Keyless chuck (1 to 16 mm) Tilting work table. Depth stop. Drilling capacity in steel 20 mm Projection 180 mm Drilling stroke 82 mm Speed 220-2840 rpm Table 290 x 290 mm Total power requirement 0.55 / 0.75 kW / volt Machine weight approx. 54 kg Dimensions L x W x H 820 x 500 x 290 mm Approx. Onsite Dimension. (l x w x h): 820 x 500 x 290 mm, weight approx.: 54 kg

Description: Aluminum saw Saw blade 300mm Double miter +45 / -60 degrees 2 speeds 1500/3000 rpm see pictures weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 800 x 600 x 1,500 mm

Description: mobile machine base Adjustable support surface: Minimum dimensions: 470 x 590 mm Maximum dimensions 740 x 860 mm 4 wheels, including 2 swivel castors with locking device for secure locking of the frame Load capacity 600 kg Wheel diameter 75 mm Weight 15 kg Dimensions L x W x H 700 x 400 x 150mm Approx. Onsite Dimension. (l x w x h): 700 x 400 x 150 mm, weight approx.: 15 kg