128,058 used machines on RESALE, but how to find them? Machine Search
Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Groove: 32 mm wide -Square: 95 x 35 mm -Length: 3500 mm -Weight: 70 kg
spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1210 mm z-axis: 1475 mm spindle travel: 710 mm B-axis (table): 360 ° Table dimensions: 1250x1400 mm Table load: 3500 kg T-slots: 22H7 T-slot - distance: 125 mm spindle turning speed range: 4-1600 U/min spindle drive: 16,5 kW Control: total power requirement: 47 kW weight of the machine ca.: 9,25 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 3500 mm width: 4840 mm T-slots: 6 x M32 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 3500 mm y-travel: 1000 mm z-travel: 1300 mm Control: Heidenhain type: TNC 155 surface area: 3700x1120 mm power capacity: 26 kW transmission ratio: 2 turning speeds: 40-2000 U/min spindle taper ISO: 50 Feed: 3000 mm/min Rapid movement: 8000 mm/min total power requirement: 40 kW weight of the machine ca.: 21 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressure regulator intermediate plate -Type: LR-ZP-A/B-D2 35428 -From: 0 bar to: 12 bar -Price: per piece -Quantity: 8x Available -Weight: 2 kg
Inductive sensor Manufacturer: Balluff -Type: BES 515-356-E4-Y -Quantity: 30x Available Price: per piece -Weight: 0.2 kg
T-slot plate, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 1500/3516/H260 mm -Plate thickness: 30 mm -Plate is: with supporting ribs -1x T slot: 17 mm -Weight: 1800 kg
We offer Doka Eurex 30 top 350 Original Doka rental storage quality. Supports cleaned and checked. Doka Eurex 30 top 350, used - 52,90€/piece Doka Stacking Pallet 1.55m x 0.85m, used = 115.00€/piece The extra-durable ceiling support with impact protector The robust and durable Eurex 30 top slab prop impresses with a high minimum load capacity of 30 kN and complies with column class C/E according to the EN 1065 standard. The integrated impact protector reliably protects the stud tube from mechanical damage and significantly increases the service life of the steel tube support. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Beck ...
Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Working Hours: 8147 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 69.6 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 87 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 125 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/perkins-t6-354-4-generator-87- kva-used/246, , = More information =, , Empty weight: 1.525 kg, Type number: T6.354.4 GENERATOR 87 KVA
Engine Brand: CATERPILLAR, Conditie: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Working Hours: 3890 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: Yes , Starter Voltage: No Starter Present , Rated Power: 1765 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 2200 , Generator Hz: 60 , Generator Volts: 440 , Generator Amps: 4011 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/caterpillar-3516b-9an-1743191- used/22404, , = More information =, , Empty weight: 16.000 kg, Type number: 9AN-1743191
Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 207 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 1605.5 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 1750 , Generator Hz: 60 , Generator Volts: 3300 , Generator Amps: 306.1 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/caterpillar-3516-generator-175 0kva-used/279, , = More information =, , Empty weight: 16.380 kg, Type number: 3516 STD GENERATOR 1750KVA
Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 11855 Hour(s), Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 1277 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 1650 , Generator Hz: 50 , Generator Volts: 400 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/caterpillar-3516-std-generator -1650-kva-used/4, , = More information =, , Empty weight: 16.000 kg, Type number: 3516 STD GENERATOR 1650 KVA
Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 1567 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 955 Kw, Rated Speed: 1200 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 1137 , Generator Hz: 60 , Generator Volts: 480 , Generator Amps: 1367 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/caterpillar-3512-dita-generato r-1137-kva-used/17, , = More information =, , Year of construction: 1010, Empty weight: 13.080 kg, Type number: 3512-DITA GENERATOR 1137 KVA
Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 671 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-lle-2644 644-new/201, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 5.500 kg, Type number: LLE-2644644
Engine Brand: CATERPILLAR, Conditie: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Flywheel Housing SAE: SAE 00 , Flywheel SAE: Unknown , Working Hours: 28745 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 682 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/catalog/product/view/id/7089, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 3508 S2A 232-2464; Transport weight [kg]: 4550
Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3512-8br-17552 85-used/266, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 8BR-1755285
Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 1079.8 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: WATERGEKOELDE INTERCOOLER , Nominal Rpm @ Nominal Power: 1500 Rpm, Engine Cooling Type: Exchanger (on engine) , Engine Color: Grey , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3516-29z-2w886 4-used/352, , = More information =, , Type: Engine, Type number: 29Z-2W8864
Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 1079.8 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: WATERGEKOELDE INTERCOOLER , Nominal Rpm @ Nominal Power: 1500 Rpm, Engine Cooling Type: Exchanger (on engine) , Engine Color: Grey , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Working Hours: 18116 Hour(s), Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3516-29z-2w886 4-used/757, , = More information =, , Type: Engine, Type number: 29Z-2W8864
Engine Brand: CATERPILLAR, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 00 , Flywheel SAE: SAE 21 , Working Hours: 47808 Hour(s), Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/catalog/product/view/id/218645, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 3516 2FW 174-4953; Transport weight [kg]: 8750
Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 707.7 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: WATERGEKOELDE INTERCOOLER , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Working Hours: 22000 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 884 Kw, Rated Speed: 1200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3516-71z-1w422 2-used/638, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 71Z-1W4222; Transport weight [kg]: 7710
Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 707.7 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: WATERGEKOELDE INTERCOOLER , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Working Hours: 22450 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 884 Kw, Rated Speed: 1200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3516-71z-1w422 2-used/708, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 71Z-1W4222; Transport weight [kg]: 7710
Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-d399-35b2530-u sed/698, , = More information =, , Type: Engine, Year of construction: 1010, Type number: D399 35B2530
x-travel: 1800 mm y-travel: 1600 mm z-travel: 1400 mm Control: Siemens type: 840 D size of pallet: 1000x1250 mm numbers of pallets: 2 : 360 ° Table load: 3500 kg Tool changer: Pos. chip conveyor: Cooling through the spindle: bar workpiece swivable +/-: 2100 mm positioning accuracy: 0,01 mm spindle taper ISO: 50 transmission ratio: 2 Torque: 1130 NM turning speeds: 25-10.000 U/min Feed: 1-40.000/50.000 mm/min total power requirement: kW weight of the machine ca.: 43 t dimensions of the machine ca.: 11x9x34,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 420 mm, 1538 mm, 3300 1/min
Stock number: 3962 CNC LATHE Manufacturer: MAZAK, Type: QTN 350 MY NEXUS Machines NO.: 202640, Year of manufacture: 2008 Specifications: Max. circumferential diameter 420 mm dia. Max. turn. About bed 700 mm DIA. Turning length 1538 mm Main motor power 30 kw Main spindle speed range 3300 rpm Spindle bore 102 mm dia. C axis - head spindle movement 0.001 degrees Z Ash Movement 1607 mm Y axis 150 mm Tool turret with 12 stations Powered stations revolver 1 12 pieces. Motor Power Driving Tools 7.5 Kw Powered tools. 4500 rpm Controlled in X-Z-C-Y axes Accessories: Hydr. Chuck main spindle 300 mm dia Driving angle tools 2 pieces Driving Tools Straight 2 pcs. Various tool holders. Tool setter Chip conveyance. Delivery time: Feb. 2025 Length: 4300 mm, Height: 2400 mm, Width: 2600 mm, Weight: 8 ...
Screw diameter 30 mm Foundation plan / installation plan (see machine layout above in the appendix), an extra foundation for the plant was not poured here Operating hours 12455h on 28.01.2021 Automatic cycle counter 743558 processed material PBT-GF 30 Ultradur B4300 G6 Q16 black Find more here - /
A vulcanising press with 4 shelves, it was purchased as a spare for the currently used one and has been standing unused since new, in total it has worked for us 0h. Model XL8-350T-700x700x4 l´LC Pressure 350T 700x 700mm thickness 6()mm Hotplate resistance Ra:,I .6a (2.5 μm) - Type of heating electr. Max. temperature 200 ‘C Pressure on workplate approx. 7 I kg-´cm2 piston diameter I 600mm -f 500mm Hydraulic pressure 16Mpa Machine structure Ko1umno,-a Motor power .of hydtaulic station ,- 5.5kW Heating power for J..ai:d working plate 9 x 0.9kW= 8.lkW Weight p,-assembly approx. 12000 g Press dimensions : Approximately 2800x I 200,´350Chnin Find more here - / Contact us at -
2013 SAR/SEPRO SR 5X-35HL S5 TRANS Injection robot Machine where functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -
CNC lathe Type: FTC 350 XLS Manufacturer: Feeler Year: 2014 Control: Fanuc Turning diam. above the bed: 630 mm Max.turning diameter: 350 mm Max.turning length: 870 mm Chip conveyor Toolholders Machine in good condition, under power. Find more here - / Contact us at -
equipped with Iemca Boss 332E-r/32 new in 2007 - Fanuc 18i-TB control - chip conveyor - machinery still in production will arrive in our stock at the end of January.
Key data: 4 mm, 1 mm, 770 mm
Heidenhain iTNC 530 Travel: X-axis 3,500 mm Y-axis 1,000 mm Z-axis 770 mm Pendulum operation 2x 1,450 x 1,000 mm Mount: SK 50 Tool magazine: 30 – compartment Spindle speed: 30 - 4,500 rpm Accessories -Conveyor - Electronic handwheel - Coolant filter system -Partition - Vetter gantry crane 2 tons - Benz SK40 angle head with torque arm
max. saw blade D 350 mm, Miter: 45-90° left + 45°-30° right, Speeds/ motor power 9/18/36/74 rpm. 1.5 + 1.8 kW, Automatic cutting feed infinitely adjustable, pneumatic jaw clamping Cutting range: Flat 90° 170 x 100 mm Flat 45° 120 x 100 mm Flat 30° 85 x 100 mm Square 90° 100 x 100 mm Square 45° 95 x 95 mm Square 30° 85 x 85 mm Dqyu0F Round 90° 120 mm Round 45° 120 mm Around 30° 100 mm Smallest dimension to be sawn around 10 mm Smallest dimension to be sawn flat 10 x 10 mm coolant device, roller conveyor, Voltage 380V-50Hz Connection cable with 16 A CEE plug, new saw blade, Operating instructions with spare parts list and electrical circuit diagram, new engine
Rego Herlitzius Type: Rotec 350 Circular knife Year of construction 2010 Cutting width: 3 – 25mm completely made of stainless steel for loaves max 3250mm length on casters tested and cleaned Stock level: 2 pieces
Telephone system, deck stations, base stations, landline telephones, mobile phones
round bar steel: 30 mm square edge steel: 28 mm L-beam: 90 x 8 mm : 150 x 8 mm pressure: 35 t total power requirement: 2,8 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 0,75 x 1,0 x 1,5 m Profile steel shears combined with: - Foot switch - Length cut The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1000 KW, 1250 kVA, 480 V
Caterpillar Marine Generator New / Unused. Make: Caterpillar Model: 3512B Built year: 2014 Serial No: S2H Condition: New / Unused Alternator: WEG Speed: 1800 rpm Power: 1250 KVA / 1000 KW Frequency: 60 Hz Voltage: 480 V ABS classed.
: 350 mm : 4160 mm : 400 mm : 350 mm : 400x350 mm dimensions of saw-band: 4160x34x1,1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 420 mm, 1500 mm, 3000 1/min
Stock number: 3979 CNC LATHE Manufacturer: MAZAK, Type: QTN 350 M Year of Make: 2005 Specifications: Max. circumferential diameter 420 mm dia. Max. turn. About bed 700 mm DIA. Turning length 1500 mm Main motor power 30 kw Spindle bore 102 mm dia. C axis - main spindle movement 0.001 degrees Tool turret with 12 stations Motor Power Driven Tools 7.5 Kw Powered tools. 25-4500 rpm Control Mazatrol 640T NEXUS Fabr. Controlled in 3 Axes Accessories: Various tool holders. Tool setter Chip conveyance. Cooling water system. Length: 4300mm, Height: 2400mm, Width: 2600mm, Weight: 7900 kg
maximum number of results exceeded
please refine your search
