w 200 used for sale

Linear guide carriage with linear guide rail INA Linear guide carriage: O4 D4 KWE 35 G3 V2 ( O4D4KWE35G3V2 ) table: 75.5 x 100 mm 4x Threaded hole: M10 x 1.5, continuous Hole spacing: 82 / 62 mm 4x Bore: Ø 7.5, continuous Hole spacing: 80 mm Linear guide rail: B7 TKD 3FG3/0300 ( B7TKD3FG3/0300 ) length: 300 mm, width: 34 mm, height: 23 mm through holes: Ø 9.5 / 15.0 mm, depth: 11 / 12 mm hole spacing: 80 mm used, tested ! Dimensions: 300 x 100 x 48 mm

Vertical Clamp Set, Vertical Toggle Clamp WMW A63 TGL 34181 Height under clamping arm: 63 mm Clamping arm length: 125 mm Clamping arm opening angle: max. 105 ° Vertical clamp set consists of 5 vertical clamps ! New !' Dimensions(per clamp): 200 x 60 x 280 mm Dimensions: 300 x 180 x 280 mm

Twist drill WMW Ø 68 mm x 335 mm HSS total length: 335 mm spiral length: 130 mm Morse taper shank: MK5 used ! Dimensions: 335 x 70 x 70 mm

Twist drill WMW Ø 52 mm x 415 mm HSS Use: N Vapor coated Total length: 415 mm Spiral length: 220 mm Morse taper shank: MK5 New ! Dimensions: 440 x 55 x 55 mm

Twist drill WMW Ø 54 mm x 415 mm HSS Usage: N Vapor coated Total length: 415 mm Spiral length: 220 mm Morse taper shank: MK5 New ! Dimensions: 440 x 60 x 60 mm

Twist Drill Bit WMW Ø 56 mm x 415 mm HSS Use: N Vapor Coated Overall Length: 415mm Spiral Length: 220mm Morse Taper Shank: MK5 New ! Dimensions: 440 x 60 x 60 mm

Twist Drill WMW / WERKÖ Ø 59 mm x 430 mm HSS Usage: N Vapor Coated Total Length: 430 mm Spiral Length: 240 mm Morse Taper Shank: MK5 New ! Dimensions: 450 x 70 x 70 mm

Twist drill WMW / WERKÖ ( WMW/WERKÖ ) Ø 60 mm x 430 mm HSS Usage: N Vapor coated Overall length: 430 mm Spiral length: 240 mm Morse taper shank: MK5 New ! Dimensions: 450 x 70 x 70 mm

Twist drill WMW / WERKÖ ( WMW/WERKÖ) Ø 61 mm x 430 mm HSS Usage: N Vapor coated Overall length: 430 mm Spiral length: 240 mm Morse taper shank: MK5 New ! Dimensions: 450 x 70 x 70 mm

Twist drill WMW Ø 69 mm x 425 mm HSS Overall length: 425 mm spiral length: 230 mm Morse taper shank: MK5 used, tested ! Dimensions: 430 x 70 x 70 mm

Mechatronic drive system, gearbox, spur gear gearbox, bevel gearbox, worm gearbox, Movegear -Gearbox: Angle gearbox -Translation: 31 : 1 -Shaft: Ø 20 x 50 mm / Ø 30 x 25 mm -Dimensions: 280/270/H210 mm -Weight: 24.5 kg

Bench drill WMW BT10/1 Drilling capacity: 10 mm projection: 210 mm Distance table to drill chuck: 210 - 400 mm table: 350 x 250 mm spindle speed: 250, 355, 710, 1000, 1400, 2000, 2500 rpm spindle stroke: 100 mm with footswitch for right and counterclockwise rotation ! Engine Power: 0.7 kW 380 V used, tested ! Dimensions: 620 x 800 x 1950 mm

Bench drill WMW BT2 projection: 210 mm Distance table to drill chuck: 110 - 260 mm Table: 340 x 280 mm spindle speed: 355, 710, 1400, 2800 rpm spindle stroke: 80 mm spindle mount: MK2 with footswitch for right and counterclockwise rotation ! engine power: 1.1 kW 380 V On steel table used, tested ! Very good condition ! Dimensions: 530 x 650 x 1850 mm

Machine control, control unit, control electronics WMW RBT400 20 plug-ins with 4 relays 2 plug-ins with 2 relays spare part for Hohenstein RBT400 ! used, tested ! Dimensions: 550 x 340 x 240 mm

Key data: 600 mm, 200 mm

Machine : Rigid angle tables for milling machines Make : EMCO unused – slight traces of storage Clamping surface : 600x200mm, 4 T-slots 12mm, spacing 45mm Vertical: Hole spacing: 90mm/390mm, for T-slot 12mm Dimensions: Length :60cm ; Width : 20 ; Height : 18cm; Weight: 44 kg PRICE : € 480,- Even larger MAHO or lids, ... Mounting plates: A - Length : 240mm ; Width : 120mm ; Height : 35; 3 T-slots 11mm spacing 45mm, (1x) PRICE : € 100,- B - Length : 420mm ; Width : 125mm ; Height : 46; 2 T-slots 11mm spacing 90mm (4x) PRICE : € 100,- C - Length : 520mm ; Width : 180mm ; Height : 56; 3 T-slots 12mm spacing 45mm (1x) PRICE : € 150,- D - Length : 600mm (660); Width : 180mm ; Height : 75; 2 T-slots 12mm spacing 90mm (3x) PRICE : € 180,-

Volume Flow Limiter WOERNER DUK-A/2,5/0 New ! Dimensions: 125 x 55 x 50 mm

Volume Flow Limiter WOERNER DUK-A/0/1,8 New ! Dimensions: 125 x 55 x 50 mm

Hydraulic cylinder, double-acting WMW Hydraulic cylinder for UPW 63 ( UPW63 ) Piston diameter: Ø 140 mm Rod diameter: Ø 56 / 120 mm stroke: 56 mm Shaft diameter: Ø 22 mm Spare part for WMW UPW 63 ! New !' Dimensions: 420 x 184 x 184 mm

Hydraulic cylinder, single-acting, spring return WMW Hydraulic cylinder for UPW 63 Piston diameter: Ø 140 mm Rod diameter: Ø 55 / 80 mm stroke: approx. 17 mm Spare part for WMW UPW 63 ! New ! Dimensions: 294 x 184 x 184 mm

Clamping cylinder, hydraulic cylinder, double-acting WMW, HOHENSTEIN stroke: 150 mm rod diameter: Ø 56 mm e.g. as a spare part for Hohenstein RBT400 ! used ! Dimensions: 360 x 135 x 130 mm

A conveyor belt from the company Schöne from Berlin is offered. Technical data: Manufacturer: Schöne Transportbänder GmbH Model: Conveyor belt CNW-5E white FDA Dimensions: 2,100 x 878mm wide, endless, spiral connection V55MO + edge verse The belt is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take back. The offers are subject to change, subject to errors and subject to any prior sale. Our terms and conditions also apply to every sale, to which we expressly refer

Dividing head with 4 jaw chucks WMW TU 100 ( TU100 ) Ø 160 DH 160 x 4-III max 2500 rpm used, tested ! Dimensions 440 x 300 x 360 mm

Dividing head WMW TU 100 ( TU100 ) used, tested ! Dimensions 440 x 400 x 230 mm

Clamping drive, clamping force generator pneumatic WMW / VORRICHTUNGSBAU HOHENSTEIN B 720 x 106 TGL 30-7608 40 New ! Dimensions: 360 x 200 x 120 mm

Clamping drive, clamping force generator electric WMW EDU I80 M TGL 0-5471 Bj: 1981 torque adjustable in 8 steps from 20 - 120 Nm 80 rpm 220 / 380 V motor: 0.0.220 Vbr /br /motor: 0.0.20 55 kW for other clamping drives see MMZ159, MMZ739 ! New !' Dimensions: 280 x 130 x 170 mm

Machine vise WMW jaw width: 160 mm span: 130 mm Dimensions: 460 x 160 x 120 mm

Clamping Actuator, Clamping Force Generator electric WMW EDU I80 TGL 0-5471 Year: 1982 Torque adjustable in 8 steps from 20 - 120 Nm 80 rpm 220 / 380 V 0,0,0 55 kW for other tensioning drives see MMZ158, MMZ739 ! New !", Dimensions: 280 x 130 x 170 mm

Round Sectioning Table, Rotary Table WMW (SEMPUCO Greiz) RmM 315 - 3007 Ø 315 mm Table height: 155 mm Groove size: 14 / 24 mm Dimensions: 625 x 490 x 155 mm

Clamping drive, clamping force generator, electric, with reversing switch WMW EDU I80 F Speed: 80 rpm Torque ( adjustable in 8 steps ): 20 - 120 Nm Motor: KMR 71 K 4 E 0,0,0 55 kW 1380 rpm 220 / 380 V 3AC hollow shaft: spline hub profile 4 x 18 x 22 x 6 ( TGL 0-5471 ) Bolt circle diameter: Ø 90 mm, 4x threaded hole M8 x 1,25 with direction of rotation switch ! used, tested ! Dimensions: 280 x 130 x 190 mm

Clamping drive, clamping force generator pneumatic WMW, VORRICHTUNGSBAU HOHENSTEIN 320 x 106 TGL 30-7608 New ! Dimensions: 340 x 180 x 130 mm

CNC machining center WILLEMIN 508MT TECHNICAL FEATURES: Year: 2016 NC Type: FANUC series 31i-B5 Number of continuous axes: 5 X-axis travel: 450 [mm] Y-axis travel: 200 [mm] Z-axis travel: 425 [mm] Fast travel speed X, Y and Z: 40000 [mm/min] Acceleration of axis displacement: 10 [m/s²] Maximum diameter in bar turning spindle: 42 [mm] Maximum speed Turning spindle: 6000 [rpm] Maximum power turning spindle: 7.5 [kW] A-axis angular travel: 360 [°] A-axis resolution: 0.001 [°] A-axis drive: Torque-motor A-axis spindle nose: A4 B-axis angular travel: -15 [°] / +100 [°] B-axis resolution: 0.001 [°] B-axis drive: Torque-motor Pin Attachment: HSK-E40 Maximum speed Spindle: 42000 [rpm] Number of tool magazine stations: 72 Maximum length Tool Size: 150 [mm] Maximum diameter Tool Size: 80 [mm] Tool Change Time: 1 [sec] Time between cuts: 3 [sec] Irrigation tray  ...

Maintenance unit with pneumatic switch WMW, EAW Type: 3 1026/19 switch st H2 NW 6 0 - 1 MPa New ! Dimensions: 380 x 240 x 150 mm

Manual control valve, manual control valve WMW StH-2 ( STH2, StH 2 ) ND: 1.0 MPa ( 10 bar ) NW: 6 mm with accessories New, with documents ! Dimensions ( Valve ) 135 x 120 x 105 mm Dimensions ( Package ): 150 x 120 x 110 mm

Hand Control Valve, Hand Control Valve WMW St H2 ND: 1.0 MPa NW: 6 mm used ! Dimensions: 140 x 110 x 130 mm

Control unit, combined control unit for pneumatic clamping devices WMW, SPEZIAL-WERKZEUGFABRIK ZELLA-MEHLIS St G K04/0412 Nominal pressure: 1 MPa (10 bar) Nominal diameter: 6 mm Wegevenil ORSTA 6-0.0 1 TGL 20705 ED 100 24 V DC used, tested ! Dimensions: 230 x 130 x 180 mm

Control unit, combined control unit for pneumatic clamping devices WMW, SPEZIAL-WERKZEUGFABRIK ZELLA-MEHLIS St G K04/0410 Nominal pressure: 10 kp/cm² (10 bar) Nominal diameter: 6 mm Wegevenil ORSTA 6-0.1 TGL 20705 ED 100 220 V AC used, tested ! Dimensions: 230 x 130 x 170 mm

Control unit, combined control unit for pneumatic clamping devices WMW, SPEZIAL-WERKZEUGFABRIK ZELLA-MEHLIS St GK 04/0400 Nominal pressure: 10 kp/cm² (10 bar) Nominal diameter: 6 mm hand levervenil ORSTA 6-0.1 TGL 20705 used, tested !' Dimensions: 240 x 130 x 240 mm

Lubrication pump WOERNER PFZ-A/0.12 New ! Dimensions: 130 x 120 x 100 mm

Lubrication pump WOERNER PFZ-M 1,25/5/P 1.13/P V: 1,25 cm3/U pmax: 210 bar New ! Dimensions: 190 x 190 x 160 mm