w 200 used for sale

Voltage tester, Duspol, voltmeter -Manufacturer: Wobla, voltage tester -Voltage range: 220-660V 0.05-0.25A / 110-750V 0.2-1.5mA -Number: 55x voltage testers available -Price: per piece, minimum order quantity 2 pieces. -Dimensions: 260/100/H40 mm -Weight: 0.3 kg/pc.

Inv. Num. : 7919 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1986 Parameters: Rolling force: 12 5 t Max. workpiece diameter: 70 mm Workpiece width: 2000 mm Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler

Vacuum sealer Webomatic Supermax Wersktatt, with shelves, 55cbm/h vacuum pump, 2 parallel welding bars, External dimensions LxWxH approx. 78x76x96cm, Inner dimensions approx. 72x52x19cm, good condition, fully functional

Inv. Num. : 7920 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1980-GO 1998 Parameters: Rolling force: 12.5 t Max. workpiece diameter: 70 mm Workpiece width: 200 mm Power consumption: 4 kW Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler

tool clamping area: Ø 30 mm Shipping weight: 50 kg Packing: ca. 600400200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bread Ribbon Rounding and Long Forming Machine WP Globus U -Bread round and long knitting machine -Werner & Pfleiderer Globus U -with 2 flour shakers -Mobile on castors Dimensions: 180x73x169cm (WxDxH)

tool taper: VDI shaft cross cut: 40 tool taper: Okuma ratio: ? turning speeds: ? U/min : ? coolant: ? Set of tool holders VDI 40 with drive ( 8 pieces ) suitable e.g. for OKUMA box dimensions approx. 500 x 300 x 200 mm weight approx. 50 kg 3 x EPPINGER 4.200.231 drilling and milling head 3 x EPPINGER 4.200.289 drilling/milling head 1 x Drill- Milling head WTO 4 1 06 1 6006 - 40 1 x COROMANT 410 1200 72 - 40 drilling and milling head 1 x 2-jaw chuck KH 1-40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 6000 mm width: 2500 mm height: 2650 mm weight of the machine ca.: 7,5 t 20” workshop container - seaworthy Various equipment - Roof hatch Weight approx. 7.5 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 8 m -Tuchel connector: 5-pin -Weight: 3.7 kg

Key data: 500 KW, 600 kVA, 400 V

Waukescha Gas-CHP VGF L36GLD Gas electricity and heat generators from 1998 with unknown operating hours, complete with cooling system, engine, exhaust gas heat exchanger, but without control. 1 available, 738 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Stamford HC I534E1, 600 KVA Manufacturer: Waukescha Model No.: VGF L36GLD Type: Gas engine (natural gas) Serial number: 80668/1 Power [KW]: 500 Year of Make: 1998 Operating hours: unknown Weight [kg]: – Dimensions LxWxH [cm]: 500 x 230 x 240 AC Generator Stamford Stamford HC I534E1 Manufacturer: Stamford Model No.: HC I534E1 Type: AC Synchronous Generator Serial number: C090036/01 Power [KVA]: 600 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 866 Speed [1/min]: 1,500 Year of Make: 1997

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 3.5 m -Transport dimensions: 400/360/H80 mm -Weight: 3.5 kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.5 m -Transport dimensions: 420/380/H80 mm -Weight: 4.4 kg

Max. size= 45 x 45 cm, Availability= 062024, numbering-perforating-scoring-slitting-systems Max. Size 45.7cm x45.7cm Min. Size 7.6cm x 12.7cm Paper Weight 45-300gsm Feeder Friction Drive Unit Type Pneumatic Numbering Heads 2 Microprocessor controlled, easy programming Electrical 220V/50Hz/5A Dimensions 1.73×0.69×1.17m Weight app 90 kg LOT Loaded in truck or container

Combined blower oven with two floors and a fermentation chamber Dimensions: 90x150x210cm Electric power: 15kW Capacity: 4 trays x 60x40cm

Simatic Panel, Operator Panel, Machine Control, Interface Panel, Control Unit, Operating Unit, Control Panel, Keyboard, Control Panel Teach Pendant -Manufacturer: Robosoft, Operator Panel for ATLANTIC ATS 3000 sheet metal shear -Type: SP 8 WL5 -Transport dimensions: 485/170/H170 mm -Weight: 3.1 kg

Marking laser, control unit, full-spectrum sensor, sensor -Manufacturer: Keyence, full-spectrum sensor, unused, original packaging -Type: LR-W500C -Voltage: 10-30V DC -Cardboard dimensions: 180/110/H650 mm -Weight: 0.2 kg

Power converter, power supply, power supply unit, switching power supply, power supply module, DIN rail power supply -Manufacturer: Mean Well, switching power supply -Type S-100F-24 -Output: 24 V 4.5 A -Dimensions: 200/10/H40 mm -Weight: 0.7 kg

Baking oven with 4 floors, hood and stand Dimensions: 165x155x215cm Electric power: 10.5kW

Bakery Oven with 4 floors and a fermentation chamber Dimensions: 115x120x200cm Electric power: 42kW Capacity: 2 trays x 60x80cm

Bakery oven with 4 levels and a fermentation chamber Manufacturer: Wiesheu External dimensions: 95x140x210cm Internal dimensions: 60x80cm Capacity: 8 trays (2x4) Electric power: 4.85kW Voltage: 400V 50Hz

faceplate diameter: 1000 mm turning diameter over slide rest: mm turning length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Wika, Bourdon tube pressure gauge -Type: 0-25 bar -Screw connection: see photos -Quantity: 1x pressure gauge available -Dimensions: 148/100/H45 mm -Weight: 1.2 kg

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----------------------------------------- Machine will be cleaned and completely checked Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw --------------------------- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ---------------------------- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 32 ...

Tool holder, milling holder, milling tool, long milling arbor, mounting bracket -Milling chuck: SK50 chuck -Type: 50 x 50 x 630 mm -Shaft: Ø 27 mm / Sleeves Ø 40/85 mm see photos -Dimensions: Ø 100 x 835 mm -Weight: 23.5 kg

Control cabinet and distribution board construction, busbars, busbar supports, busbar adapters, OM adapters -Manufacturer: wöhner, busbar adapter -Type: EEC6080-L -Item No.: 32 466 -Number: 2x adapters available -Dimensions: 70/55/H200 mm -Weight: 0.4 kg

Control cabinet and distribution board construction, busbars, busbar supports, busbar adapters, OM adapters -Manufacturer: wöhner, busbar adapter -Type: EEC6080-L MCCB LUB 12 LUB 32 -Item No.: 32 427 -Number: 10x adapters available -Dimensions: 60/45/H200 mm -Weight: 0.3 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 8.3 m -Plug: see photos -Transport dimensions: 400/400/H100 mm -Weight: 4.6 kg

Number of spindles: 6 St. Working width: 230 mm Working height: 160 mm Length of the planing table: 1050 mm Feed motor: 7 kW Feed speed: 6-40 m/min. Weinig Powermat 1200 ---------------------------------------------------------------------- - with infeed automation Weinig wheel magazine EM 100 and linked with outfeed automation Weinig High-Mech A 1 The machine will be completely checked in our warehouse before delivery! Detailed description: ---------------------------------------------------------------------- - 1. Weinig planer and moulder Powermat 1200 ---------------------------------------------------------------------- - Technical data: ------------------------ Working width 20 - 230 mm (with tool flight circle 93 - 163 mm) Working height 10 - 160 mm (with tool flight circle 93 - 163 mm) 1. Spindle ----------------------------- First lower horizontal spindle Motor with brake 7.5 KW ...

Trowalizing machine Engine Type OUX 160M6 6.9 KW, 380 V, 1455 rpm, 15.2 A, 50 Hz Speed range 965 to 10455 rpm. Dimensions: H 1700 x W 1730 x D 1900 Weight: 1450 kg net

tool taper: VDI 40 DIN 69880 number: 22 Stück A range of tool holders in good condition. Tool holder size: VDI 40, DIN 69880 Were used on a Gildemeister CTX 500 E CNC lathe. Quantity: 1 driven tool holder, angled design. 18 driven tool holders, straight design. 3 standard tool holders. Only sold in a package! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SW BA600-2 CNC machining center with swivel table / built in 1999 / Siemens 840C control / incl. chip conveyor, coolant lubricant preparation and extraction

Auxiliary power switch, circuit breaker, fuse, line switch, miniature circuit breaker, load break switch, terminal block -Manufacturer: wöhner, fuse-switch disconnector, load break switch -Type: FSD-NH2 -Number: 2x load break switches available -Price: per piece -Overall dimensions: 285/210/H145 mm -Weight: 3.7 kg/pc.

Reciprocating saw, dovetail saw, tiger saw, saber saw -Manufacturer: Flex, reciprocating saw with carrying case -Type: SK 602 VE -Nominal power input: 1000 W -Stroke rate: 800 - 2400 /min -Dimensions: 620/260/H110 mm -Weight: 9 kg

Reciprocating saw, dovetail saw, tiger saw, saber saw -Manufacturer: Flex, reciprocating saw with carrying case -Type: SK ZSK 602 E -Nominal power input: 1000 W -Stroke rate: 700 - 2400 /min -Dimensions: 620/260/H110 mm -Weight: 8.6 kg

Capacity 75 kg Output capacity max. 800 kg/h Blank weight 0.25 - 3100 g

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring element: for machine tools and systems Ø 150 mm -Mounting hole: M16 -Quantity: 1 piece available -Dimensions: Ø 150 x 40 mm -Weight: 1.1 kg/piece

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring element: for machine tools and systems Ø 150 mm -Mounting hole: M10 -Quantity: 1 piece available -Dimensions: Ø 150 x 43 mm -Weight: 1.1 kg/piece

Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Ø23 x 33 mm, 81 pieces Sizes: Ø 4/5/6/8/10/12 mm, see photos / parts list -Price/Fee: complete -Transport dimensions: 555/205/H190 mm -Weight: 15.2 kg

Reel, reel rod, trapezoidal thread spindle, spindle -Reel: Reel rod with quick-release fastener -Type: unfortunately without a type designation -Shaft: Ø 44 mm, dimensions see photos -Dimensions: Ø 98 x 440 mm -Weight: 3.3 kg

Granule dryer, granule drying plant, granule conveyor, vacuum conveyor, vacuum station -Manufacturer: Heliostat granule dryer without drying container -Type: Heliostat WFAT-8490 -Individual components: see photos -Dimensions: 1360/1340/H1910 mm -Weight: 757 kg/unit

Offer 24402 Specifications: - Drilling capacity in steel 50 mm - Drilling spindle holder MK 5 - Drilling spindle stroke 315 mm - Projection min / max 350 / 1600 mm - Column diameter 350 mm - max. / min. – distance: - Spindle – base plate 350 - 1250 mm - Vertical stroke of the boom 580 mm - 16 spindle speeds 25 - 2000 rpm - Feed rates 0.04 - 3.2 m/rev - Drilling spindle drive 400 V / 4 kW - Lift drive 1.5 kW - Column clamping 0.75 kW - Dice table - Coolant device - Space requirement approx. W 2490 x H 2645 x D 1060 mm - Weight approx. 3500 kg

Cross-cut line Opticut 150 -4 4 ejections built in 2004

Panel length: 3,500 mm Panel width: 1,300 mm Workpiece thickness min: 11 mm Workpiece thickness max: 60 mm Crkikw9B Input length min: 300 mm Cycle time: 200 s Capacity m2/ 8h: 720 High Frequency Press: Yes Power HF generator: 30 kW Gluing unit: Yes Joint gluing press: Yes

Signal towers, signal lights, signal lamps, indicator lights, signal light columns, light signal alarm systems -Manufacturer: Werma, 3-stage signal tower -Type: Type 12 -Item No.: 640 810 00 -Voltage: 24 V -Number: 1x signal tower available -Dimensions: Ø 70 x 365 mm -Weight: 0.4 kg

Motors: no - Pneumatic axes Gripper rotation: Yes together with Z-axis Clamp tilting: No Clamp sprue : Yes Vacuum pupms: 1 Clamp control : Yes Euromap 12 - Stroke (Y): 700 mm - Stroke (X): 100 mm - Stroke (Z): 45-90 mm

Rotary unit, rotary device, turning table, turning unit -Roller conveyor length: 850 mm -Rollers: Ø 80-120 mm -Roller spacing: 190 mm -Roller width: 220 mm

- Tool measuring probe RENISHAW TS-23R - Rapid Traverse (X x Y x Z): 36 / 36 / 36 mm/min - Spindle taper: BBT40 - Travel (X x Y x Z): 1.000 x 560 x 600 mm - Number of tool stations: 30 (automatic) - Control: HW F i Series - Max. spindle speed: 12

plus A-C servo axis only 3 year old, not used payload 5-7 kg with A-C payload 20 kg without A-C - Stroke (Z): 3.500 mm - Stroke (Y): 1.600 mm - Stroke (X): 900 mm - Driving method: plus A-C servo axis

- Pneumatic axes - Gripper rotation: 90 ? - Interface: EUROMAP 12 - Stroke (X): 300 mm - Stroke (Y): 1.000 mm - Stroke (Z): 1.500 mm

- B axis: 0 ? -270 ? electric - C axis: 0 ? - 90 ? pneumatic - Control: Teach Box - Stroke (Y): 1.200 mm - Stroke (X): 550 mm - Stroke (Z): 2.000 mm - Driving method: servo