w 200 used for sale

Cutter Kilia 200 liter Express, surface, bowl lid and bowl stainless steel, noise protection lid, loading, ejector, knife shaft brake, knife shaft speed 2-touring

Hand lever shears, long knife, sheet metal and round steel shears, lever shears -Mubea: sheet metal and round steel shears -Cutting insert length: 200 mm -Dimensions: 380/160/H1240 mm -Weight: 22 kg

Manufacturer/ Make: SKODA Typ/ Type: W200 Year of construction/ year: 1987 X-way: 11500 mm Y-way/ Y-way: 4500 mm Spindle diameter: 200 mm

An original control cabinet that was dismantled by PAAL Konti 275 C, built in 1994. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325,425, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

pneumatic angle grinder, flex, grinding witch, cut-off grinder, cut-off machine, angle grinder -pneumatic straight screwdriver -Operating pressure: 6 bar -Speed: 900 rpm -Price: per piece -Number: 2 pieces -Dimensions: 380/42/H67 mm -Weight: 1.4 kg/piece

An original control cabinet dismantled by PAAL Konti 200B, built in 1987. It is based on analog relays. It is also suitable for the other models such as: Konti 125, 200, 275 , depending on model and drive power. A complete control cabinet, functional

Rubber mat, rubber plate, stop rubber, stop plate, rubber cover, rubber pad -Gum plate: from pre-tensioning technology -Thickness: 48 mm -Width: 150 mm -Length: 200 mm -Number: 12 pieces -Price: per piece -Weight: 4.3 kg/piece

0: 4000,5000 mm Working height: 120 mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 3.700mm, 5.100mm, 6.100mm mm Working height: 160 mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 3.700mm, 5.100mm, 6.100mm mm Working height: 160 mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 200 mm -Hole spacing: 140 mm -Price: per piece -Number: 3 pieces -Dimensions: 200/15/H65 mm -Weight: 1.5 kg/piece

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Steel jaw: 200 mm -Hole spacing: 140 mm/Ø 11 mm -Dimensions: 200/18/H65 mm -Weight: 1.8 kg

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Pull-down jaws: with magnet -Interior dimensions: 140/160 mm -Groove width: 8 mm -Price: per piece -Number: 2 pieces -Dimensions: 200/30/H100 mm -Weight: 3.1 kg/piece

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -1 piece: pull-down jaw -Interior dimensions: 140/160 mm -Groove width: 8 mm -Dimensions: 200/30/H100 mm -Weight: 3.2 kg

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 200/111 mm -Height: 18 mm -Hole circle: Ø 152/8 mm -Delivery of: steel/stainless steel cover plates possible -Number: 13x pillows available -Price: per piece -Weight: 0.4 kg/piece

three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Handover: as is -Chuck size: Ø 200 mm -Bolt circle: Ø 134 mm -Weight: 20.7 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 200 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Max. Pressure: 10 bar -Price: per piece -Number: 2 pieces -Dimension: Ø 38 x 368 mm -Weight: 0.8 kg/piece

Catalog No. : 5936 Type: W 200 HB Producer: ŠKODA Made in: 1986 Characteristic: Control system: HEIDENHAIN 530 Minimum rotary speed of the spindle: 0.8 1/min Maximum rotary speed of the spindle: 630 1/min X-Axis travels: 16200 mm Y-Axis travels: 5250 mm Z-Axis travels: 1600 mm Taper: ISO 60 Spindle diameter: 200 mm Machine height: 8000 mm Machine length: 20000 mm Machine width: 10000 mm Equipment: Chip convoyer 2008: renovation (new control. wiring and drives)

Machine Details Warehouse number 1105-03632 Machine type CNC turning and milling center Make INDEX Type G 200 Year of construction 1997 Control type CNC Controller C200- Siemens 840 C Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from location Technical details Turning diameter 200 mm Turning length 400 mm Controller C200- Siemens 840 C Circulation diameter 420 mm Rod diameter 65 mm Chuck diameter 165 mm Speed range - spindle ~ 6,000 rpm Drive power - Spindle motor 100% ED= 7.5/13/20 kW Drive power - Spindle motor 40% ED= 13.3/22/29 kW Rod diameter 65 mm Spindle bearing diameter 100 mm Chuck diameter 165 mm Speed range - spindle ~ 6,000 rpm Drive power - spindle motor 100% ED= 7.5/13 kW Drive power - Spindle motor 40% ED= 13.3/22 kW C - axis 0.001 ° Number of revolvers 2. Turret head (x-fold) 2 x 14 pos Travel - x ...

Lifting tipper Kemper HK 200 - Boiler lift tipper from Kemper type HK 200 RD - with stage for WP DK 250 boiler - with enclosure - Height: 366cm - Tilt height 260cm - Year of construction 2014

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Recess: Ø 160 mm -Bolt circle: Ø 180 mm -Passage: Ø 55 mm -Weight: 14 kg

Pressure booster system, centrifugal pump, water pump, inline pump used 2 pumps Manufacturer: KSB Type ETALINE ETL 150-150-200 GGSAV10D301104 Year of construction 2017 Pump wheel Ø 221 mm Q 2x 209 m³/h at 14.5 m 11 kW Control KSB PumpDrive PDRV2__011K00 Dimensions approx. 2500 x 1200 x 1500 mm All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 200 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Dimensions: 420/95/H95 mm -Weight: 5.3 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 200 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Dimension: Ø 27 x 333 mm -Weight: 0.3 kg

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 200/111 mm -Height: 24 mm -Hole circle: Ø 152/8 mm -Delivery of: steel/stainless steel cover plates possible -Weight: 0.5 kg/piece

Description Domino M230i T4 The ability to use stroke lengths of 0 – 360 mm and the auto-stop function to interrupt movement when touching an obstacle make the M230i-T4 label dispenser the most versatile and safe labeling system available on the market today. It is immediately available and ready for use Viewing possible at any time If it does not fit, there is always a large number of different labelers in stock. Talk to us and we will find the right one for you.

Siemens AXIOM Iconos R 200 as spare parts dispenser with the following system components: Generator Polydoros SX 65/80_Model No. 8609364 X2217 m. Bedienpult_Model No. 3157554 X2076 Tube Optitop 150/40/80 HC 0,6/1,0, Tiefenblende_Model No. 10092618_Bj. 01/2017 digital image processing Fluorospot Compact_Model No. 7144434 Gerätesteuerpult_Model No. 7030708 G5478 Image intensifier 40 cm_Model No. 3828832 V5092 Handauslöser_Model No. 9722059 G5455 Monitor Simomed HM 44_Model No. 2323464-2_Bj. 2006 Flat screen monitor Acer_Model No. V193 B_Bj. 2009 • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EX ...

Double column press with 200 T output, Idle speed 45 mm/sec Opening speed 60 mm/sec Starting press speed 9 mm/sec Table size 2000x600mm Plunger size 2000x600mm OIL temperature monitoring Manual lubrication Free positioning of the plunger ( adjustable via adjustable sensors ) PILZ photoelectric sensors 14.1 mm on front and back Circulatory oil cooling Pressure retaining valve 0 to 600 sec. Mechanical plunger protection at the upper breakpoint T-grooves according to DIN, and according to customer requirements Pressure adjustment from 40 T to 200 T (adjustable via rotary knob) Travel limitation optionally via pressure or position Set-up operation, single stroke ( adjustable via key switch ) Two-hand operation Construction, commissioning, instruction against separate calculation Design Press design double column press Therma ...

Main characteristics: -Designed for automatic dosing, twisting and filling of various mixtures under vacuum; -Funnel 240 liters; -With a rotor head; -Microprocessor control; -Electronic setting of the portion in the range from 5 to 100,000 grams with precise adjustment in steps of 0.1 grams; -The pressure of 35 bar; -Low noise level; -Ability to save about 80 user programs; -Productivity: 3500 ÷ 5000 kg / hour; -Installation power: 7 kW;

Moving bezel, moving bezel, resting stick, lynette -Manufacturer: TOS for lathe type SUS80 -Max. Passage: Ø 200 mm -Plating: brass -Top height: 230 mm -Drawings for the photos -Quantity: 1 piece -Dimensions: 530/200/H740 mm -Weight: 100kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 80 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 2 pieces -Dimensions: 225/46/H46 mm -Weight: 0.7 kg/piece

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 200 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Dimensions: 345/47/H47 mm -Weight: 1.0 kg

Long link roller chains, transport chain, roller chain, drive chain -Chain length: 10 m -Pitch: 200 mm -Intermediate dimension: 48 mm -Dimensions 1200/1000/100 mm -Weight: 176.5 kg

Long link roller chains, transport chain, roller chain, drive chain -Chain length: 9600 mm -Pitch: 200 mm -Intermediate dimension: 48 mm -Dimensions: 1140/920/100 mm -Weight: 166.5 kg

-Electric control -Cooling as desired - water or air -Stainless details and stainless evaporator -Direct transmission -Easy access to components -ABS Plastic cover -Highly efficient machine without losses -Net dimensions: 920 / 594 / 867 mm. -Receiving hopper with a capacity of 55 kg. - Power supply: 230 / 50 / 1 - Power: 820 watts - Refrigerant: R452A -1 year warranty Category: Ice generators Label: Ice

Long link roller chains, transport chain, roller chain, drive chain -Chain length: 10.4 m -Pitch: 200 mm -Intermediate dimension: 48 mm -Price: per piece -Number: 2 pieces -Dimensions: 1140/960/100 mm -Weight: 180 kg/piece

Stainless steel Dimensions: 730 / 680 / 700 mm.; Weight: 40 kg.; Bottom thickness: 5 mm.; Side thickness: 2 mm.; 4 wheels with a diameter of 150 mm.; Conform to DIN 9797;

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 200/116 mm -Height: 58 mm -Number: 10x pillows available -Price: per piece -Weight: 3.4 kg/piece

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 200/125 mm -Height: 58 mm -Number: 9x pillows available -Price: per piece -Weight: 2.9 kg/piece

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 200/140 mm -Height: 58 mm -Number: 5x pillows available -Price: per piece -Weight: 2.6 kg/piece

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 200/114 mm -Height: 32 mm -Number: 4x pillows available -Price: per piece -Weight: 2.1 kg/piece

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 200/136 mm -Height: 57 mm -Number: 7x pillows available -Price: per piece -Weight: 2.6 kg/piece

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 300/200 mm -Height: 60 mm -Weight: 6 kg

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 200/142 mm -Height: 20 mm -Hole circle: Ø 171/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 192x pillows available -Price: per piece -Weight: 0.3 kg/piece

Clipping machine Technopack KDCVT 200 Type: KDCVT 200 Dimensions: 100x60x190cm Maximum closing diameter: 120mm Delivery time: 30 working days after advanced payment

Machine Details Warehouse number 1105-03676 Machine type CNC lathe Make MAZAK Type SQT 200 Year of construction 1998 Control type CNC Control Mazatrol fusion 640T Storage location FRANCE Country of origin Japan Delivery time ON REQUEST Freight base EX WORK Price Technical details Turning diameter 350 mm Turning length 514 mm Control Mazatrol fusion 640T Circulation diameter 530 mm Spindle nose A2-6, 62mm Spindle bore 51 mm Speed 35-5,000 rpm Turret head (x-fold) 12-fold x-travel 166 mm z-travel 530 mm Total power requirement 18.5 kW Machine weight approx. 5.65 t Information 2-axle, WITH tailstock, WITH SPAENEFOERDER WITH MAZAROL T PLUS

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 200 mm -Hole circle: Ø 120/Ø 12 mm -Dimensions: Ø 200/H37 mm -Weight: 7.5 kg

Short-stroke cylinders, pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders - Stroke: 200 mm - Piston rod: O 20 mm -Dimensions: 265/108 / H112 mm mm -Weight: 4.3 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-80-200-PPV-A -Piston: Ø 80 mm -Stroke: 200 mm -Max. Pressure: 12 bar -Dimensions: 420/95/H95 mm -Weight: 5 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Piston rod: Ø 20 mm -Stroke: 200 mm -Dimensions: 75/75/H500 mm -Weight: 3.9 kg