w 200 used for sale

90 KW / 50 Hz.

Generator 200 kVA (hood unit) power: 200 kVA / 160 kW PRP Operating mode: 1500 r.p.m Voltage: 400 V / 230 V Available voltages: 230 230 / 132 V Power factor: cos phi 0.8 Engine: Engine manufacturer: FPT_IVECO Engine model: NEF67TE3F Engine type: Four-stroke diesel Type of injection: direct, common rail Kind of aspiration: turbocharger and subsequent cooling Cylinder, number and layout: 6 L Total capacity: 6.7 l Cooling system: Liquid (water + 50% glycol) Specifications engine oil: ACEA E3 - E5 Fuel consumption 100% PRP: 45.5 l / h Fuel consumption 75% PRP: 41.9 l / h Fuel consumption 50% PRP: 29.9 l / h Oil consumption under full load: 0.5% of fuel consumption Controls: Electronic Inner diameter exhaust pipe output: 70 mm Alternator: Builder: Manufacturer: STAMFORD Poles: 4 Connection type (default): Star - series Clutch type: S-3 11 ' 1/2 Insulation protect ...

<br>Hand system 15 stations f r Calendar production<br><br>Still in operation: No.<br>Available: immediately

Techno Pack double Clipper DCA E 200 fully automatic coffee machine with hanger loop dispenser Fill caliber up to 65 mm

Seydelmann AU 200-B, 200 mm automatic grinder, all stainless steel, hopper capacity approx. 400 litres, 2 working worm speeds, 3 feeding worm Speeds, refurbished. The machine is immediately available, and can be tested in our facility in Koblenz, Germany.

McIntyre 200B Shear Available with or without a stand, this machine might look small but it has a big cutting capacity Small but powerful McIntyre's wide experience in hydraulic equipment manufacture has enabled us to build an 8” shear with a staggering cutting force. Although equipped with only a blade, the high shear force and wide tip to tip opening on the McIntyre 200B means that it can deal efficiently with a whole range of non- ferrous cleaning and sizing operations - in particular larger diameter electric cables and valves. In most cases - if your metal will fit into the jaw of the 200B, then this machine will cut it. Our company can provide this equipment with short delivery time.

used vertical tool presetting device in very good condition, ready to use Recording: SK 50 max. tool length: 460mm max. tool diameter: 400mm Optics: 20x optical magnification Energy supply: Current: 220Volt 50 HZ luminous flux connection Pneumatics: 6 bar air pressure connection Machine space requirement: (w x t x h) approx. 1400 x 800 x 1700mm (without operator and service environment) Accessories / Optional equipment: â?¢ Machine cabinet with compartment â?¢ Calibration mandrel / reference mandrel â?¢ Adapter holder Iso 50 to Iso 40 for SK 40 tools Bdujvng8ha â?¢ Adapter holder Iso 50 to VDI 30 â?¢ Adapter holder Iso 50 to VDI 20 â?¢ Adapter holder Iso 50 on special tool holder â?¢ Additional measuring clock holder â?¢ Tool positioning device to 4 x 90° â?¢ Operatin ...

Ready to ship

see pdf attached

Material: mild steel Reel in stainless steel;

Multifunction X-ray machine Built in 2005 Generator Poydoros SX 65/80 Image storage LIH (last image hold) Image intensifier 23 cm Tube Optitop 150/30/50 Very good optical condition

This rotary valve was used, was only used for spare parts storage for a foreign project and was therefore never in use. The rotary conveyor thus has no operating hours and is in a new condition. The rotary valve, with square inlet, is suitable for the controlled supply and dosing of powdered and granulated bulk materials from silos, funnels, pneumatic conveyor systems, filter systems and cyclones. Name: Rotary valve Manufacturer: Sunds MDF Type: LAF-200 Year of construction: 2010 Material: Normal steel Drive motor: 11 kW Dimensions: L 3400 x W 2200 x H 2370 mm Empty weight: approx. 4500 kg Speed: 1475 / 22 Condition: Used Tech. Documentation: No Note: Inlet L: 1980 mm x W: 1180 mm, Outlet L: 2180 mm X W: 1000 mm, 7 chambers. The rotary valve has no operating hours and is in a new condition. Price: On request

Knife for cutter LASKA type K-200 Request a quote iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biała USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Seydelmann AU 200-B angle grinder, 200 mm hole plate diameter, almost completely made of solid stainless steel, with loading device. You are very welcome to test the machine in Koblenz, Germany.

Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tyre testing machine - static balancer for passenger tyres. Tyre size from 15 "to 18" (20") CE certified More details see the attached description!

Grinding wheel diameter x W: 200 x 32 mm Grinding wheel bore: 32 mm Grinding wheel grain: K 36 / K 80 RPM: 2850 RPM S1 engine power output 100%: 0.90 kW Motor power S6 40%: 1.25 kW Voltage: 400 V Width: 510 mm Depth: 270 mm Height: 310 mm Weight: approx. 25 kg Scope of delivery: Roughing wheel K 36 Simple disk K 80 Spark cover on both sides Workpiece support Base extra charge available. Special price including delivery to 1 address Germany (Mainland).

TIPPER TIE TECHNOPACK TCNV-200 BT pneumatically operated single-clipper

Kilia Supreme Cut 200 ltr., 200 liters bowl cutter, bowl and bowl-cover stainless steel, year of manufacture 2011, hydraulic noise reduction cover, knife shaft brake electrically operated, separate stainless steel electric control cabinet, membrane keyboard, variable bowl speed, variable knife speed, variable mixing speed forwards and reverse, cleaning system, knife head with 6 knifes, hydraulic loading device for 200 liter bins, hydraulic unloader. You are very welcome to inspect and test the machine.

Type Cutters Warranty 12 months Height 2350 Width 2200 mm Length 1910 mm Weight 4000 kg Voltage Electrical: 400V 50Hz 3N Installed Power 57.25 kw Main material Stainlees Steel Time of realisation in stock Cutter Type Bowl Cutter Cutter made of Stainless steel Bowl made of Stainless steel Bowl capacity 200 l Efficiency 100-140 kg/cycle Knives amount 6 pc. Knife shaft revolutions 900/1800/3600 rpm Bowl revolutions 7.5/10/15 rpm

Kilia vacuum bowl cutter, 200 liters bowl cutter, bowl and bowl-cover stainless steel, hydraulic noise reduction cover, knife shaft brake electrically operated, membrane keyboard, variable knife speed, knife head, hydraulic loading device, hydraulic unloader

Plates for filler Handtmann VF 80 , VF 200 , VF 300P - NEW cataog number 834403 Plates for filler Handtmann VF 300 - NEW Catalog number 834401 Plates for filler Handtmann VF 611, VF 634 - NEW Catalog number 860678 Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Helium leak detector Manufacturer: Leybold Type: UL 200 Condition: Tested and ready for use Outing: Oil Lubricated & Dry Available! Connection: 230V Delivery time: 1 where. (u.ue.V.); Ready

Locking valve vacuum pump DK200 Status: Generalueberholt Gewaehrleistung: 12 months Manufacturer: Leybold Type: DK200 Engine rated power: 5.5KW nominal suction digesters: 200m3/h Final pressure without gasb.: small 5x10e-3 Zubehoer: Operating instructions with spare parts list

Included in delivery: 01x CS Sigma profile, used Material color: sendzimir galvanized Profile length: approx. 1,950 mm CS-Sigma.: approx. 200 x 65 x 18 mm Material thickness: approx. 1.50 mm Note: The angles shown are not part of the offer. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelving systems Delivery with our own fleet (without discharge)

Gross volume: 300 ltr. Net volume: 220 ltr. 1 x Head Material: mild steel.

Included in delivery: 01x CS Sigma profile, used Material color: sendzimir galvanized Profile length: approx. 1,650 mm CS-Sigma.: ca, 200 x 65 x 18 mm Material thickness: approx. 1.50 mm Note: The angles shown are not part of the offer. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelving systems Delivery with our own fleet (without discharge)

Kilia vacuum bowl cutter, year of manufacture 2010, 200 liters bowl cutter, bowl and bowl-cover stainless steel, hydraulic noise reduction cover, knife shaft brake electrically operated, membrane keyboard, variable knife speed, variable bowl speeds, mixing speed, hydraulic loading device for 200 liter bins, hydraulic unloader, You are very welcome to inspect the machine at our facility in Koblenz, Germany.

Small compact Miltirip sawing machine KUSING RP - 200. Technical parameters: Power of the main motor : 7.5 / 11 kW Diameter of the shaft: 30 mm Length of shaft: 200 mm Power of the feed motor : 0.55 kW Feed speed : 2 - 12 m/min Tool diameter : 250 / 300 mm Maximum material height: 65 mm Minimum material length: 450 mm ( 250 mm on request ) Small compact Miltirip saw KUSING RP - 200. The machine is suitable for cutting material with low energy consumption. Suitable for cutting raw wood and semi-finished products. KuSING has been manufacturing woodworking machines since 1991. Machine in stock. The advertisement was automatically translated. Translation errors are possible.

BRIQUETTES MACHINE PRACTICALLY BRAND NEW, WORKED FOR JUST TWO MONTHS Type_DINAMIC 70/200 Depth _2000 mm Height _ 1430 mm Production_ 100/200 Kg/h Briquette dimension_ diameter 70 mm Briquette length_ 50 mm Motor_ Kw 9,3 Net weight_ 1400 kg

4 used LTG KENYA dust and fiber separators and compactors, year 1995, each composed composed of: centrifugal fan (radial blades) dust suction ventilator, motor with 11 kW power, blade diameter 800 mm cyclone centrifugal dust separator (Vortex) type ZSC 200, for air volume up to 2000 m3/h LTG compacting power screw (CPS), screw diameter 110 mm, motor with 0,75 kW power dust quantity up to 100 Kg/h

diameter 200mm, little used, dusted, good condition.4 Bolts with bolt spacing approx. 94mm, Hole circle diameter of the bolts approx. 133mm, the largest diameter of the short cone approx. 106mm, Drawbar in the middle. All information to the best of our knowledge but without any information. Special price

2-sided LED display panel, SX502-420/05/0X-200-0A-20/0, Siebert, mint condition Special price The current price of a similar product is € 5.300 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new in original packaging! This high quality scoreboard was purchased in early 2000 and has been originally packed in spare parts storage since then. The unit is as good as new and has never been used. On the part of the manufacturer there is a limited service. Parallel interface for Profibus Serial interface for PC 2 page LED display 104 x 40 x 21cm Incl documentation and programs Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will ref ...

Machine name: Paddle dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of construction: 2002 Speed: 107 rpm Material: Stainless steel Drive motor: 5.5 KW Version: EExdellCT4 Total capacity: 235 liters Wetted parts: stainless steel 1.4571 Gearbox:Helical gear motor Equipment: Double jacket, mechanical seal, wave heating Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Tech. Documentation: yes available Note: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maierkopf HWR 225 Condition: Used very good Price: on request

various knife head fraesers / plan fraesers 200, 215 250 mm

various hydraulic machine screw corners 100 / 200 mm

Doppelschleifbock Manufacturer: FAMO Type: G-200 A Diameter of grinding wheel: 200 mm 0,75 kW 2800 RPM All information without guarantee

Autoclave/Hardening boiler Manufacturer: Scholz & Co. Year of construction: 1996 Working pressure: 16 bar Working temperature: 203° C Volume: 101.800 liters Diameter: 2,000 m Length: 26 m Charging medium: saturated steam Quantity: 9 pieces (all identical) The autoclaves could be inspected at every time! In very good condition!

Kupfermühle 630/200

Helium leak detector Manufacturer: Leybold Type: UL 200 Condition: Tested and ready to use Execution: Lubricated & dry available! Connection: 230V Time of delivery: 1 where. (u.ue.V.; ready for operation

Block vane pump DK200 Status: Rebuilt Warranty: 12 months Manufacturer: Leybold Type: DK200 Rated motor power: 5,5KW Nominal: 200m ³/h Final pressure without GASB.: small 5x10e-3 Accessories: operating instructions spare parts list Delivery: in the short term; ready for operation

PLC – controlled (touch screen) multifunctional press with multiple functions Firstly, our multi-function press is a vacuum press, three-dimensional film deformation with or without membrane. Vacuum chamber size 2,340 x 1,340 mm Maximum workpiece height 60 mm Equipped with a vacuum diaphragm at the top and bottom. The press is equipped with a powerful vacuum system and a vacuum tank, which guarantees a constant and uniform supply of vacuum to the working chamber. Drive power vacuum pump 4.5 kW Vacuum tank volume 500 liters Vacuum pump flow rate 100 m³/hour Two pieces of air heat exchanger, each with a heating capacity of 3 kW. Secondly, our multi-function press is a hydraulic plate press with ten pieces of press cylinder and 200 tons pressing force – Suitable for different applications - - Cold and hot pressing - Single-sided and double-sided veneer pressing ...

Used automatic packaging line by MIFLEX-MASZ model SP-200, new 2014. Automatic packaging line (recently used for packaging herbs and teas in shaped sachets) with automatic packaging in doypacks. Can also be used for other types of assortment. It consists of a packer, sachet packer with feeder and dispenser. Built on a self-supporting frame with protective covers. Equipped with independent temperature control of each sealing jaw and infinitely variable speed control. Emergency conditions are visualised on the control panel . All product contact parts are easy to dismantle for cleaning and replacement, made of P.Z. H. certified materials. Sachet dispenser AS-20 Equipped with : - unwinding of the packaging material - guide roller system - volumetric dispenser with adjustable portions - sealing system - shaped sachet punching system - control cabinet - main drive with adjustab ...

Technical data: -Pressure capacity 2000 kN -Max working width 3100 mm -Stand round 3200 mm -Stand RADIUS 300 mm -Max mounted height 965 mm -Hub, or insertion depth Steplessly adjustable 0-400 mm -Plunger speed forward + reverse per 100 mm / sec -Operating speed in 9 steps selectable 1-10 mm / sec -Drive 400 V / 26.5 kW - space requirement approx. B H 4400 x 3500 X 2200 mm -Weight approx. 18500 kg -with: - CNC - control CYBELEC ModEva 15s BJ. 2007 -Back gauge with 4 controlled pneum. on the side and height-adjustable stop fingers -controlled bending AIDS in the velocity range -Hydr. -Pneum.. Clamp of the upper tool + substation witness -mot. Crowning / hydro cushion in the table -laterally movable support arms -E - foot switch -split pointed tool R 1-100 t / m, split die

Pressure capacity: 8000 kg Maximum cutting area - 200 mm2 for material strength 40 kg / mm2 Horizontal radius 200 mm Clearance between the side walls 160 mm Fixed hub 35 mm Pin hole in the Stossel 38 x 60 mm Adjustability of the Stossels 70 mm Weight of 400 kg of the Presse Operating instructions The machine is located in the new value. State, probably never in use. Control actuator Stober

The scope of delivery includes: 01x Depth bar frame, used Material colour: sendzimir galvanized Total length: approx. 1,250 mm for shelf depth: 1,200 mm Clear span: approx. 1,100 mm Truss support: approx. 50 mm Support angle: L: approx. 80 x 80 mm Total width: approx. 860 mm Inner width: approx. 855 mm Material thickness: approx. 3 mm Side frame: Length: approx. 1.2450 - 1.070 mm Front Tapered Width: approx. 200 mm Height: approx. 195 mm End stop: Width: approx. 200 mm Height approx. 195 mm Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: It is a used item, there may be scratches, dents and traces of use. This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which are separately depending o ...

Double grinding machine TS 200 SD P with SUCTION, machine stand, emergency stop push button and brake smooth-running, maintenance-free motor Protective covers closed at the sides Stable, adjustable workpiece supports High level of safety comfort thanks to adjustable spark deflectors suitable for grinding, deburring and sharpening tools of all kinds, metal profiles, etc. Motor Circuit Breakers and Undervoltage Trippers Double-sided spark/eye protection connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single-shift operation - Suction nozzle Ø (mm): 42 - Grinding wheel (mm): 200 x 32 x 32 - Machine dimension without packaging (mm): 250 x 470 230 - Speed (1/min): 2550 - Three-phase motor 400 V (kW)1: Operating mode S2-30 min (short-term operation) - Weight (kg): 60 Shipping time:immediately, from stock

ALLMATIC LC 160/200

AUTOMATIC BRIQUETTING machine type COMAFER DINAMIC 85N second hand machine volt. 380/50 CE mark : Yes briquett diameter mm. 60 production from 40 kg. to 85 kg. / hour motor power Hp 7,5 net weigth kgs. 850