w 200 used for sale

General SKU303N411 LocationBarneveld MakeFrewitt Fribourg TypeSG-200 Year of construction(unknown, manufactering tag is missing Main Features MaterialStainless steel Motor4 KW Specified Features - Sieve granulator Granulating sieveSieving, sizing and rasping machine Sieve sizesdia.200mm x160mm Sieve perforation+/- 3mm Inletdia.200mm Outletdia.250mm Motor4 KW (Ex) With variable speed drivecheck Speed257-1472 rpm MaterialStainless steel Information With switchcheck Floor space1,5x1,2 M Total height1,4 M Weight300 KG ATEX compatiblecheckSieve granulatorsFrewitt FribourgSieves > Sieve granulatorsBrand > Frewitt Fribourg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Bar ...

General SKU213T1392 LocationBarneveld MakeRubitec AG TypeVMT 200 No.071080 Year of construction2007 Main Features MaterialStainless steel Motor4 KW Width190 mm Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Rotor sizesDia: 190x100 mm Sieve sizesDia:260x130 mm Sieve perforationDia: 5 mm OutletDia: 300 mm Motor4kW,220-240/380-415Volt, 2905rpm(EX) Speed100-1000 U/min MaterialStainless steel 1.4435 (316L) Information Mounted on stainl. st. framecheck Mounted on wheelscheck Total height0,88 m Weight230kg Floor space1,0x0,60 m ATEX compatiblecheck Extra SpecificationsAtex II3GSieve granulatorsRubitecSieves > Sieve granulatorsBrand > Rubitec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspe ...

General SKU209W124 LocationBarneveld MakeHaagen & Rinau Typeunimix No.301014/1 Year of construction1998 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume200 Ltr. Motor0.18 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacitybruto 260 Ltr. ( netto 200 Ltr.) Vessel sizesDia. 600x1057 mm Dished bottomcheck Dished top sidecheck Manholecheck Dia. 600 mm Top connectionscheck Outletcheck bottom flange DN40 Half coil jacketedcheckVolume 28 Ltr. Max. temperature151°C With turbo stirrercheck magnetic ( agitator is missing) Motor0,18 kW, 220-240 volt, 380-420 volt, 1370 rpm Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) Information Mounted on legscheck Weight430 kg Floorspace1,05x0,90 m Total height1,90 m Extra Specifications- bottom agitator is missing.  ...

General SKU389X986 LocationBarneveld MakeDickow Pumpen TypeNCL s 200/400 Mach.No.24221005 Pressure Working pressure4.5 Bar Main Features MaterialCasted steel Volume500000 Ltr. Motor90 KW Specified Features - Centrifugal Pump Pumpcheck Capacity500 m3/h With motor90 kW (400 V, 1485 rpm) Inlet250 mm Outlet195 mm Centrifugal Pumps MaterialSilicon steel 1.5023 Information Year of construction2024 Mounted on framecheck Total height1,05 m CEcheck Floorspace0,85 x 2,2 m Weight1500 kgCentrifugal PumpsDickow Pumpen GmbHPumps > Centrifugal PumpsBrand > Dickow Pumpen GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Key data: 500 kN, 95 g/PS, 30 mm

Year of Make: 2005 Clamping force: 50 tons. shot volume: 106 cm³ shot weight: 95 gr./PS Screw diameter: 30 mm with take off robot Good condition

diameter: 200 mm height: 90 mm Pole pitch: Radial Polteilung 4-teili mm total power requirement: 0,048 kW Shipping weight: 30 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Magnet L x W x H: (1.450 + 650=) 2.100 x 1.200 x 410mm. (130mm. Transportmagnet) - Belt: 1.200mm. - AA.: Ca. 2.850mm.

Belt withness; 2.000 mm. (new belt) - With new control-unit . Eddy current separator is overhauled, sandblasted and painted.

Rexroth Bosch MA4/200-7301-M Control Unit 1070079888 GA1 Robot Controller Module Item condition: Used, in perfect condition R14A1_PD(BOR) You can find more control units - new and used - in our shop! International shipping costs on request!

B&A REF: 9223 TON: 70 SCREW DIAMETER: 32MM SHOT WEIGHT: 109 STROKE VOLUME: 120CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 530 X 495MM DBTB: 360 X 315MM MIN MOULD HEIGHT: 120MM MAX MOULD HEIGHT: 400MM MOULD OPENING STROKE: 310MM MAX DAYLIGHT: 710MM EJECTOR STROKE: 100MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 6KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE: HYDRAULIC

2 pieces (identical) used lathes Turning center milling center INDEX R200 INDEX VirtualLine Year of construction 2011 and year of construction 2009 At that time, the original price of both machines together: €1,385,647.90 gross Regular service only from the manufacturer INDEX. Service and parts exchange alone between 17.04. and 05.08.2025 in the amount of € 96,305.41 (invoices are available for inspection). Therefore, the machines are in absolutely excellent condition. Spindle hours (as of 21.11.2025) Year of construction 2011: S1: 4,114 h S2: 3,064 h S3: 2,535 h S5: 4,170 h Spindle hours (as of 21.11.2025) Year of construction 2009: S1: 2,951 h S2: 953 h S3: 3,524 h S5: 5,990 h Turning-milling centre with roller bearing slide guides Work spindles can be moved on slides. Tool carrier integrated into recesses in the machine bed, all linear axes arranged at  ...

Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 10249 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 12 Volt , Rated Power: 160 Kw, Rated Speed: 1500 Rpm, Injection Type: Electronic Fuelpump (EDC) , Generator KVA: 200 , Generator Hz: 50 , Generator Volts: 400/230 , Generator Amps: 289 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/perkins-1500-pk51589-generator -200-kva-used/72, , = More information =, , Empty weight: 4.775 kg, Type number: 1500 PK51589 GENERATOR 200 KVA

- Noise Rating: 64.6 dB at 7m and 100% Load, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Power [PS]: 218; Gross weight [kg]: 4487; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach, - Built-in switch 50/60 Hz, - Sockets: 2x16A, 2x 32A, 1x 63A, 1x 125A; Water Tank Volume [l]: 822

TECHNICAL DATA OF THE MACHINE General Clamping force: 50 t Year of manufacture: 2006 Control: NC4 Weight: 2,700 kg Dimensions (L × W × H): 3.8 × 1.1 × 2.1 m Injection unit – .../200 Screw diameter: 22 mm Injection volume: 41.8 cc Specific injection pressure: 2,800 bar Closing system – 50/... Clamping force: 50 t Tool plate dimensions: 520 × 520 mm Clearance between columns: 355 × 355 mm Tool height: 210 mm Opening Distance: 400mm Maximum Plate Distance: 610mm

Packer, Fabr. Flema, 200 crates/h for 20x0.5 lt EURO bottles, built in 1994, functional, regularly serviced ex brewery.

Aventics R412019043 MSC 200-25, 10 BAR 16W39 Slide Item condition: Used, in perfect condition You can find more ejectors - new and used - in our shop! International shipping costs on request!

TBA 19 200 SQ in excellent condition only 11000 Hrs

Ref. no.: 18494 Hersteller: ENGEL Year of construction: 2013 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Mould height min.: 200 mm Opening width: 600 mm Platen size (h x v): 500 X 450 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2400 bar Measurements and weight Dimensions: 3,4 x 1,3 x 1,8 m Machine weight: 2900 kg Additional information & extras Core pull: 1 pcs

An oil-hydraulic press brake built in 1978 is offered, max. pressing force: 2000kN, max. stroke: 250mm, max. operating pressure: 295bar. Control panel defective. Viewing is possible by arrangement.

Offer 25434 Specifications: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Quill stroke 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

Offer 25434 Specifications: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Quill stroke 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

diameter: 315 mm bore: 89 mm dimensions of the machine ca.: m Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Continuous Pallet roller conveyor 2690-200-120 RA2444 Pallet roller conveyor segment, split Conveyor length (FL): 2690 mm Frame width (RB): 200/120 mm Roller spacing / pitch 75 mm Frame height: 90 mm Includes 2 brake rollers and two stoppers Stoppers only for cross loading, longitudinal loading requires disassembly Can also be loaded longitudinally with a pallet truck, but without the middle brake rollers Floor mounting possible without middle brake roller Lanes should be installed with a slope of 3-5% Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) Conveying length in mm: 2690 Nominal / outside width in mm: 200, 120 Roll division in mm: 75 Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einf ...

Nipper - Double action hydraulic nipping press workingwidth: 420 mm up to 6.000 kg pressure refurbished and we will install a new pump after order

Very good surface grinding machine Table surface / working area 200 x 600 mm

Technical data: Maximum pressure: 60 tons Year of Make: 1999 Press force: 72.7 t/cm² Number of Bindings: 4 Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1400 mm Bale weight: 450-650 kg Weight: approx. 20 tons Power connection: 400 V/ 45 kW Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the bale chamber for easy maintenance If you have any further questions about this or similar channel balers, please do not hesitate to contact us by email or phone!

Working length: 2040mm, max. cutting capacity: 3mm, stroke rate: 30strokes/min, table height: approx. 850mm, back gauge: 750mm. Machine dimensions X/Y/Z: approx. 2400mm/2000mm/1450mm, weight: approx. 1500kg. An on site inspection is possible.

A Schechtl swing bending machine for sheet metal processing is available. Working length: 2040mm, opening height: 140mm, bending capacity: 3mm, bending speed: 50°/s, back gauge: 750mm. Machine dimensions X/Y/Z: approx. 3000mm/750mm/1250mm, weight: approx. 2750kg. On-site inspection is possible.

- Producer Schuko - Type FATi-SR 200/30 - Width ~ 3000 mm - Height ~ 2.100 mm - Height with ventilator 2.690 mm - Depth ~ 900 mm - Trockenabsaugung - With filter mat - With paper prefilter - With exhauster - Ventilation system performance, exhaust fan 8.900 m³/h - Motor power 2,6 kW - Exhaust pipe 350 mm - Without switch - Ausführung/Schutzart EExe ii, T3 - In zinc plated steel - Voltage / HZ 400/50 - Location on stock

Manufacturer: Viessmann Model: Vitobloc 200 EM-70/115 Year of Manufacture: 2015 Electrical Output: 70 kW Electrical Input Power: 116 kW Thermal Output: 204 kW Energy Efficiency Class: H Maximum Flow Temperature: 90 °C Maximum Return Temperature: 70 °C Maximum Operating Pressure: 10 bar Electrical Connection: 400 V / 50 Hz Maximum Current: 144 A Condition:Used. The system is fully functional except for the AWT Find more here - / Contact us at -

All-Fill Series 200 Twin Head Automatic Filling machine Find more here - / Contact us at -

CONTROLS   CNC controls MAZATROL MATRIX 2 BASIC FUNCTIONS   number of spindles: 2   number of turrets: 2   live positions: yes WORKING RANGE TURNING   swing diameter (max): 370 mm   turning diameter (max): 344 mm MAIN SPINDLE   spindle revolutions (max): 5000 /min   drive power: 22 kW COUNTER SPINDLE   spindle revolutions (max): 5000 /min   drive power: 22 kW X/Z SLIDE   Z-axis travel: 760 mm   X-axis travel: 207 mm   Y-axis travel: 100 mm   - rotation speeds (max): 6000 /min X/Z SLIDE   Z-axis travel: 815 mm   X-axis travel: 141 mm   Y-axis travel: 70 mm ATTACHMENTS (TURNING)   chip conveyor: yes   European CE standards: yes • Robot interface• Automatic door• Tool setter on the ...

Refurbished SEMT PIELSTICK 8PA4 V 200 VG Engine Block in Parts for Sale You are welcome to make me an offer for the parts such as crankshaft etc!

Refurbished SEMT PIELSTICK 8PA4 V 200 VG Engine Block in Parts for Sale You are welcome to make me an offer for the parts such as crankshaft etc!

Manufacturer: Manroland Model: 200 E Hi Print Year of Manufacture: 2008 Total Impressions: 17,000,000 Operating hours : 15372 Find more here - / Contact us at -

Key data: 600 kN, 94 g/PS, 30 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET60-200 Concept Year of Make: 2003 Clamping force: 60 tons Spar spacing 420 x 420 mm Screws DN: 30 mm Max. displacement: 106 cm³ Moulded part weight: 94 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W621-1381 2 pcs core train

INDUSTRIAL TUMBLER DRYER MACHINE DE CROWN SST-200 BODY MATERIAL: STAINLESS STEEL SUS304/MILD STEEL. CAPACITY (MAX.WET) : 90KG DIMENSION: 2050mm(L) x 1800mm(W)x2200mm(H) POWER SUPPLY: 415VAC 3PH 50HZ. DRUM DIMENSION: 1480mm (OD) x 990mm(L) DRUM SPEED: 29 RPM. information contact: Ms.Supawadee Kumpone, Manager Procurement, F6 email: supawadeegreatglove.com Tel : +6693-7478585 Office : +6676-620190 Ext : 194 Ms.Wilawan Sakulsongboonsisri, DGM Finance,F6 Tel : +6689-1969222 Office : +6676-620190 Ext : 111

INDUSTRIAL TUMBLER DRYER MACHINE DE CROWN SST-200 BODY MATERIAL: STAINLESS STEEL SUS304/MILD STEEL. CAPACITY (MAX.WET) : 90KG DIMENSION: 2050mm(L) x 1800mm(W)x2200mm(H) POWER SUPPLY: 415VAC 3PH 50HZ. DRUM DIMENSION: 1480mm (OD) x 990mm(L) DRUM SPEED: 29 RPM. CONDITION : MOTOR DAMAGED NEED TO REPLACEMENT THE NEW MOTOR

Edge banding machine Type: EDGETEQ S-200 Manufacturer: Homag Year: 2018 Hours: 540 Machine in very good condition, under power Find more here - / Contact us at -

Ref. no.: 18587 Hersteller: FERROMATIK MILACRON Year of construction: 2001 Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 416 cm³ Shot weight: 375 g Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg

Offer 25434 Technical data: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Autom. Quill feed - Quill stroke - Wind cutting device 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

Complete line for mixing/granulating, sieving and drying/pellet coating of powder, consisting of • Glatt VG PRO 200 mixing granulator - Gross volume 209 L - Usable volume 60-160 L, 36-96 kg at a density of 0.6 kg/dm3 - Container pressure shock resistance 12 bar - Mixing blade drive 15 kW, 10-200 rpm - Chopper drive 5.5 kW, 3,000 rpm - Protection class IP65 - Mixer with explosion protection EX II 3G (Zone 2), motors EEX, control cabinet NON EX - Product-contact seals in elastomer - Product-contact parts in AISI 318LN/1.4462, AISI 316L/1.4435, AISI 316L/1.4404 - Powder vacuum feed, feed pipe DN 50 - Pneumatic discharge valve - Liquid feed via spray system with peristaltic pump - WIP via rotating cleaning nozzles with WIP rack - Qualification support package (DQ/IQ) - GlattView 19 operation panel • Glatt GSE PRO 200 rotary sieve - Capacity 100-1,500 kg/h - Rotor  ...

pressure: 200 t table length: 1600 mm table width: 1300 mm dayligth: 1800 mm Control: Simatic ram return capacity: 6000 kg table load capacity: 7000 kp total power requirement: ? ca. 25-30 kW weight of the machine ca.: 19 t dimensions of the machine ca.: 2,95 5 6 m Special price 49,900 EUR from foundation upon acceptance until January 30, 2026. Normal price from warehouse. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure,, Extraction N183,, Cooling and cleaning device for dielectric,, Automatic fire extinguishing device,, Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading, 1 set of gripper fingers for workpiece automation HSK 63/SK40, Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A,, 1 exchange element with flange,, 1 x flushing kit,, Test bar, X axis travel: 440 mm, B-axis: +/- 15°, Y axis travel: 876 mm, Z-axis travel: 420 mm, E-axis swivel range: 210°, A-axis rotation range: 360°, workpiece carrier base: SK 50, workpiece length max.: 200 mm, Workpiece diameter max.: 250 mm, workpiece weight: 15 kg, Connected load approx.: 6.7 kW 400V/50 Hz, Weight approx: 7000 kg, Dimensions W x D x H =: 1987  ...

Manufacturer: FEI Model: QUANTA 200 Type: FP 2012/11 Type of Machine : Scanning Electron Microscope (SEM) Power Requirements: 210–240 V, 50/60 Hz, 15 A Certification: CE Features & Capabilities: - Operates in high vacuum, low vacuum, and ESEM (Environmental SEM) at atmospheric pressure - Equipped with SE (Secondary Electron) and BSE (Backscattered Electron) detectors for all vacuum modes - Includes Peltier cooling stage for temperature-controlled sample testing Accessories & Inclusions: - User manual and full set of original documentation - Two EDWARDS vacuum pumps - Original FEI software, plus: - Second PC (clone of the original) - HD clone with backup installation software - Complete software and hardware support materials Maintenance History: - Last manufacturer maintenance: August 2023 Find more here - / Contact us at -

A slant bed lathe Traub Sonim is available. Turning diameter over bed/cross slide: 350mm/160mm, turning length: 200mm, speed: 5000rpm. Machine dimensions X/Y/Z: approx. 3200mm/1500mm/1700mm, weight: approx. 3500kg. An on-site inspection is possible.

Frame dowel and slotted hole drilling machine from Hofmann HT 200 U with angle adjustment Special drilling machine for staircase construction, window construction and universal use by pneumatic height adjustment. Angled dowels and picket holes are easy thanks to the rotatable drilling unit realizable. Motor pole-switchable, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Start of the motor with practical handle switch Precision Chuck with Two Inserts 16mm and M10 Thread Table size approx. 1100 x 240mm Linear laser for exact positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the processing height, dowels on two levels without changing The desired drilling heights can be achieved for each drilling level with a handwheel and digital counter , the changeover is then pneumatically done from the front Transve ...

A fully autonomous CNC dual-spindle turning machine Index is available. Turning diameter: 220mm, main spindle bar capacity: 65mm, main spindle power chuck diameter: 210mm, sub-spindle bar capacity: 60mm, sub-spindle power chuck diameter: 210mm, tool stations: 12, Y-axis travel: 120mm, gripper diameter range: 4mm-45mm/40mm-65mm, coolant pump pressure: 8bar, high-pressure pump capacity: 80bar, chip conveyor discharge height: 1250mm. Overall system dimensions X/Y/Z: approx. 9150mm/4350mm/2000mm, weight: approx. 10500kg, operating hours: approx. 92000h. Including bar loader FMB turbo 8-80 XT/3200A, automatic loading and unloading system alphaMAX 6-axis, chip conveyor, coolant system, high-pressure pump and spare parts. Operation with the loading and unloading system is designed for disc diameters from 80mm to 220mm. This is a fully automated system without operator. Documentation available.  ...

Height=1.93 m, Overall length= 0.86 m, Overall width= 0.75 m, Net weight= 179 kg,

General SKU427W1534 MakeJaudt Typeø 200 mm No.240-0572-10 Year of construction2010 LocationBarneveld Main Features MaterialStainless steel Motor0.37 KW Inlet diameter200 mm Specified Features - Rotating valve MaterialStainless steel 1.4552 Rotary valvecheck Rotor with scraperscheck Rotor diameter240 Rotor width220 Number of locks:6 Lock sizes220 x20 x100x120 mm Capacity8 l every rotation Inlet200 mm Inlet flange sizes335 mm Outlet200 mm Outlet flange sizes335 mm Installation height350 mm With motor0.37 kW (1360 rpm (Ex)) Rotor speed21 rpm With adjustable packing glandscheck Air purged sealingscheck Capacity60 m3/h Information Floorspace1.2 x 0.4 m Total height0.35 m Weight150 kg CEcheckRotating valvesJaudtRotary valves > Rotating valvesBrand > Jaudt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new ...