127,859 used machines on RESALE, but how to find them? Machine Search
plate thickness: 4.0 mm thickness at Niro-steel: 3.0 mm blade length: 200 mm angle adjustable from - to: 30 - 120 Grad no. of strokes: 60 Hub/min oil volume: 60.0 ltr. table:: 1000 x 800 mm total power requirement: 2.62 kW weight: 800 kg range L-W-H: 1000 x 1500 x 1440 mm Furnishing: - robust hydraulic notching machine, with adjustable angle - Adjustment range 30 - 120 degrees Adjustment with the 2x front handwheels - hydraulic clamping and locking - Infinitely adjustable cutting depth, with digital display - 2x locking accuracy stop, with stop bars - Stripper for sheet metal cutting - Collecting container for clippings - Freely movable foot pedal for triggering the stroke The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A semi-automatic tray sealer Multivac is available. Cycle performance: 3-12 tray cycles/min, max. tray dimensions X/Y: 380mm/300mm, max. tray height: 110mm, max. film width: 450mm, max. film diameter: 250mm, machine dimensions X/Y/Z: approx. 1500mm/800mm/1650mm, weight: approx. 300kg. An on-site inspection is possible.
Mazatrol Matrix Control Max. turning diameter 530 mm Max. machining length 500 mm Max. bar passage 52 mm Travel X/Y/Z 450/200/550 mm Main spindle max. speed 5,000 rpm C-axis Milling spindle max. speed 12,000 rpm B-axis -30°-190°, 1° indexing Capto C6 Tool Holder Tool magazine with 72 tool positions Max. tool diameter 90 mm Max. tool diameter with free secondary positions 125 mm Max. tool length 210 mm Tailstock MK5 Automatic Parts Catcher (D:65 x L:120 x 2.5KG) Automatic Tooleye Conveyor Cooling by the spindle, 70 bar Coolant system with 70 bar high-pressure pump and paper belt filter Milling spindle synchronized threading Rapid traverse stylus angle of inclination during movement Cylinder (G07) + Polar Interpolation (G12.1) Signal lamp 1 pcs Irco Bar Feeder ILS-MUK-7012 -Max. rod length: 1,200 mm 1 pc oil mist extraction
- Multi-Tasking Machining in a Single Machine Setup - Sub spindle for overtaking with full C-Axis - The INTEGREX IV series can finish all machining processes. - High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. - Lower turret with rotary tool spindle so livew tooling - Chip conveyor with coolant and 15 Bar iKZ - Double chuck KNCS-N 210-53 SMW Autoblock - MAZAK Flex -GL150F Gantry Loader - Gripping range 200 x 120 length x 15 Kg
Presse à injecter ENGEL VC 200/80 Année : 2005 Nombre d’heures : 79 000 h Force de fermeture : 80 T Course d'ouverture : 450 mm Epaisseur moule min : 250 mm Dimensions des plateaux : 670 x 600 mm Diamètre bagues de centrage : 125 mm diamètre de la vis : 35 mm Volume injectable : 154 cm3 COMMANDE : CC200 1 noyau hydraulique interface robot : Euromap 67 DONNÉES GÉNÉRALES : Puissance de chauffage installée : 6,8 kW Puissance d'entraînement de la pompe : 15 kW Puissance totale connectée : moteur + chauffage Poids total : 5.200 kg Dimensions totales L x l x H : 4,0 x 1,4 x 2,0 m
For single and multiple containers Straight infeed conveyor with stacking device For PE film Film width 30\endash 200 mm Film thickness 20\endash 100 µm Roll diameter max. 300 mm, core diameter 70/76 mm Output max. 24 cycles/min, depending on format PLC Eberle PLS 508 with Eprom Enclosure with safety switches Connection 400V/50Hz/8.5kW This machine is offered at a special price and sold as-is without technical inspection.
gebr. CNC press brake Darley, type EHP 200, built in 1989 Press force: 2000kN Working width: 5200mm Power: 15kW Oil capacity: 160l Weight: approx. 20,000kg Tools & Accessories Included
different sets for an F 200 3 jaw chuck (base jaws on top jaws)
Manufacturer: UnoTech Model: 200 V5H4 RB Year of Manufacture: 2017 Loose hydraulic unit with 4x 75kW pumps Find more here - / Contact us at -
used
Manufacturer: Ebu Model: STA 200/2000 Year of Manufacture: 2005 Overhaul: 2016 ( is currently equipped with a longitudinal transfer and has run very little since the overhaul) Punching force: 200 tons Installation space: 2000+800 Ram stroke: 16–160 Plunger adjustment: 0–120 mm Advance max.: 9999.9 Max. bandwidth: 300 Speed range: 30–150 Find more here - / Contact us at -
Injection Molding Nose Demag ergotech 50/370-200 BJ 2000
Manufacturer: BJORN EVAPORATOR Model: ELT 200 Year of Manufacture: 2004 The evaporator was installed and commissioned and dismantled in October 2022 (Stored , not operational) Electrical Specifications: - Voltage: 3 × 400 V + 0 + Earth - Frequency: 50 Hz - Maximum Fuse: 3 × 150 Amp Find more here - / Contact us at -
Inv. Num. : 5982 Type: TURNTEC 83-200 Producer: VOJUS Created: 2003 Parameters: Control system: TURN tec. Maximum turning length: 1800 mm Maximum turning diameter over bed: 400 mm Maximum turning diameter over support: 350 mm Turning diameter: 600 mm Spindle diameter: 10 mm
I am selling this machine. It can be tested when connected. Very good condition. X 11,500, Y 3,150, Z 2,000, clamping M 100. The machine comes with a support column, 6 plates, a rotating table E 20, heads, etc. This is a complete workstation.
spindle diameter: 200 mm Processing width on table: 6000 mm Processing height on table: 3150 mm Processing depth: 1985 mm Slide cross-section: 530 x 550 mm table load: 20 t Plate field size: 16800 x 5500 mm tool taper: SK 60 total power requirement: kW weight of the machine ca.: 173 t dimensions of the machine ca.: m - Additional equipment Angle head large and small - The OB no. is: 22979 - The table is the model S20 MP table Size: 2200 x 2500 mm - The processing width on the machine X -Way is 6000 mm - Including 6 plates 5600 mm x 1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control Mazatrol 640 MT Pro Max. Rotary Diameter 660 mm Max. turning length 1,045 mm Travel X1 axis: 580 mm X2 axis: 150 mm Y-axis: 160 mm Z1 axle: 1,045 mm Z2 axis: 1,010 mm W-axis: 1,050 mm B-axis: -30 to 210° Rapid traverse X/Y/Z/W 50/40/50/30 m/min Main spindle Drive power: 22 kW Max. spindle speed 4,600 rpm C-axis Sub-spindle Drive power: 18.5 kW Max. spindle speed 5,000 rpm C-axis Milling spindle Drive power: 18.5 kW Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 40 tool positions Max. tool diameter: 90/125 mm Max. tool length: 300 mm Max. tool weight: 10 kg lower turret Drum turret 9 tool stations Special equipment Conveyor Tooleye 15 bar high pressure pump Milling spindle synchronized threading 5-axis simultaneous machining Preparation for multiple and flash tool holders Interface for ...
Boiling kettle Brökelmann 200 L, side kettle mobile, electric heating in the glycerine bath, diameter of boiler approx. 70cm, depth approx. 54cm, Total dimensions LxWxH approx. 85x105x100cm, connection 400V very good used condition, fully functional
control: MAZAK Mazatrol Nexus swing over bed: 675 mm swing diameter over bed slide: 380 mm turning length: 538 mm c-axis: indexing: 0.001 ° turning speeds: 35-5000 U/min tool taper: DIN A2-6 y-axis: mm rapid traverse X-axis: 30 m/min rapid traverse Z-axis: 33 m/min Overall size: 4500 x 2000 x 1600 mm y-axis: mm weight of the machine ca.: 6.5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Injection moulding machine Krauss Maffei KM 200-1400 C2 BJ 2000
Permissible load 200 kg Lifting mast with floor bearing Overall height 3,050 mm Lifting height centre of mandrel to floor approx. 2.50 m Load reversing gear with mandrel holder Mandrel holder diam. 35 mm, L 460 mm, centre distance 600 mm Lifting column manually swivelling Drive 24/400V/50Hz
The machine is in good technical condition, testing is possible by prior arrangement.
TECHNICAL SPECIFICATIONS Number of silos: 3 pcs. (identical) Capacity: approx. 200 cbm/pc. Diameter: 6,500 mm Silo body height: 8,500 mm Cone height: 4,000 mm Total height: approx. 10,500 mm Bolted: yes SPECIFIC COMMENT - Hot-dip galvanized steel substructure - At the cone precipitation drainage
Inv. Num. : 8742 Type: SQT 200 MY Producer: MAZAK Created: 2004 Parameters: Control system: MAZATROL PC-FUSION-CNC 640T Maximum turning diameter over bed: 525 mm Maximum length of travel in the X-axis: 180 mm Maximum length of travel in the Y-axis: 100 mm Maximum feed in the Z-axis: 575 mm Axis C: 360 Maximum spindle speed: 6000 1/min Max. length of the workpiece: 300 mm Max. workpiece diameter: 300 mm Spindle taper: MORSE 5 Max. rod diameter: 51 mm Number of tool head positions: 12 Weight: 5600 kg Equipment: Bar Feeder
Durma HAP 200 ton x 3100 mm Capacity: 200 ton x 3100 mm Backgauge: elec Passage between uprights: 2550 mm Max stroke: 190 mm Depth of throat: 260 mm Locking speed: 100 mm/sec Working speed: 7 mm/sec Returning speed: 73 mm/sec Length: 4270 mm Depth: 1750 mm Height: 2850 mm Weight: 12 ton
Presse à injecter BILLION 200T Bi-matière HERCULE H260-470/200 Commande Dixit 500 Année : 1998 Nombre d’heures: 23 000 heures Caractéristiques des 2 groupes d’injection : Groupe H260 : diamètre 32 mm - volume injectable de 116 cm3 Pression d’injection : 2205 bars Groupe H470 : diamètre 38 mm - volume injectable de 198 cm3 Pressions d’injection : 2327 bars Diamètre bague du plateau : 100 mm Distance entre colonnes : 610 x 610 mm Dimensions des plateau : 870 x 870 mm Course d'ouverture : 560 mm Epaisseur du moule min/max : 280-580mm Capacité du réservoir d’huile : 500 litres Interface robot Robot STAR 1000EMIII 3 Course en X : 2100 mm / Course en Y : 750 mm / Course en Z : 1000 mm
turning diameter: 340 mm turning length: 300 mm bar material dia.: 65 mm control: FANUC Main Spindle:: spindle speed:: 4500 min-¹ spindle motor: 11 / 15 kW c-axis: 0,001 ° travel -x axis: 227,5 mm travel -z axis: 320 mm y-axis: +/- 41 mm tail stock: tailstock quill stroke: 80 mm tailstock adjustment: 200 mm Live Tools: work piece power: 5,5 / 3,7 kW toolpiece turning speed range: 6000 U/min total power requirement: 24 kVA dimensions of the machine ca.: 1,65 x 1,65 x 1,85 mm Total weight, approx.: 3200 kg Commissioned in 2015 - FANUC CNC control - Chuck diameter: 315 mm - C-axis with spindle brake - 12-station tool turret with driven tools - 3.2 m bar feeder - Tailstock MK 4 - Set of tools - Set of spare parts (all linear guides, covers) 12,000h operating hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 200 mm, 400 mm, 6000 1/min
Machine Manufacturer: Index-Werke KG, Esslingen Machine: CNC lathe Index G 200 Compact Machines Year of Make:2001 Availability: in advance. from CW47/2025
Offer 25318 Specifications: - Manual band sawing machine - Saw blade dimensions 2375 x 20 x 0.9 mm - 2 cutting speeds N 33 / 66 rpm - Max. clamping possibility 205 mm - Mitre adjustable li + re 30 ° - Cutting range - 90° round 160 mm - Square 160 mm - flat 200 x 100 mm - 45° li + re round 140 mm - flat 140 x 60 mm - Drive 400 V / 1.5 / 1.8 kW - Coolant device - Discharge roller conveyor with stop 3000 mm - Feed roller conveyor 1500 mm - Weight approx. 350 kg - Space requirement approx. W 1100 x H 1700 x D 1550 mm
volume bucket for Genie / Terex attachment, 200 cm width, 1.60 m³ capacity, many other attachments on stock
Earth drill 200 mm TBG-300 (8 mm thickness), suitable for Jansen HBG-2000 earth drill, photo is an example photo!
Earth drill 200 mm TBG-300 (8 mm thickness), suitable for Jansen HBG-2000 earth drill, photo is an example photo!
High-pressure clamp vise MC2 / 200 ORIGINAL PRICE: ~ $1,650.00 Description: - Body made of cast iron FCD 65, jaws made of steel - Ground on the bottom and sides - Anti-lift mechanism - Built-in pull-down mechanism - Mechanical force amplification, seal-free and maintenance-free - Short design - Clamping force can be preset Technical data: Jaw width: 200 mm Vise opening: 300 mm Jaw height: 55 mm Dimensions: 600 x 180 x 210 mm Weight: approx. 90 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Continuous vacuum filler for straight filling, portioning, and twisting Optional: holding and twisting device All in one 240 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Filling pressure: up to 35 bar Portioning speed: up to 380 portions per minute Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.5 KW Machine dimensions in cm: Width: 210 Lenght: 170 Height: 190
Clamping Force: 200 ton
Fully automatic inspection machine for prefilled syringes with water-based, clear solutions, not suitable for protein solutions Maximum output 12,000 ampoules/hour For prefilled syringes diam. 6.85-14.45 mm, height incl. flange and needle guard max. 120 mm, flange diam. max. 24 mm, depending on format set Automatic syringe feed from upstream machine via screw conveyor Syringe turning station for foreign objects and liquid residues in the needle Rotary device for foreign object detection 3 CCD cameras for - Reflective foreign object detection station (foreign objects such as glass, white spots, etc.) - Non-reflective foreign object detection (colour dots, colour blocks, metal chips, etc.) - Reflective or non-reflective foreign objects and aluminium hydroxide detection station 1 inspection station for flange damage and missing pistons 1 inspection stat ...
Properties: Volume 200 L Material V2A (AISI 304) 1.4301 Surface on the outside marbled III C Total height 1900 mm Overall height 1770 mm Cylinder length 1020 mm Diameter width 477 mm Operating pressure 0.99 bar Number of feet 3 or 4 [ 5000 characters max., no information on the advertiser ] Properties: Volume 200 L Material V2A (AISI 304) 1.4301 Surface on the outside marbled III C Total height 1900 mm Overall height 1770 mm Cylinder length 1020 mm Diameter width 477 mm Operating pressure 0.99 bar Number of feet 3 or 4 [ 5000 characters max., no information on the advertiser ] Properties: Volume 200 L Material V2A (AISI 304) 1.4301 Surface on the outside marbled III C Total height 1900 mm Overall height 1770 mm Cylinder length 1020 mm Diameter width 477 mm Operating pressure 0.99 bar Number of feet 3 or 4 Description Tank topstock: Manhol ...
Brand: Piovan Type: Dryer HR2000651 Model: HRM200 Serie nr.: 08 020 044/07 0135 Dry Air Quantity : 200 m3 / h Hopper capacity: 3 × 300 dm³ Connected Load max KW: 38 kW Year of manufacturing 2015 and Model: PTUSET Year of manufacturing 2017 Connected Load max KW: 9,0
Key data: 1800 mm, 2000 mm, 1100 mm
Large 5-axis universal/gantry machining centre for heavy workpieces Technical key data (typical, depending on variants): Table/load capacity: NC rotary table approx. 1,700 × 1,400 mm, up to approx. 5,000 kg Head/table axes: Swivel milling head B 0–180°, C 360° (resolution up to 0.001°) Spindle: up to approx. 10,000 min⁻¹, HSK-A63 Tool magazine: usually ~60 places Control: often Heidenhain TNC 430 (built in 2003) Peripherals (common): IKZ/HD cooling, chip conveyor
General SKU212T477 LocationBarneveld MakeAPV TypeW-25/200-380 Main Features MaterialStainless steel Volume300000 Ltr. Motor30 KW Specified Features - Centrifugal Pump MaterialStainless steel 1.4408 Centrifugal Pumps Pumpcheck Number of pumps:1 Capacity300 m3/h With motor30 kW 380/415 Volt (ABB)(Ex) Inletdia. 150 mm Outletdia. 100 mm Information Mach.No.92214540915360000 Floorspace1x0,7 m CEcheck Total height0,6 m Weight390 kg ATEX compatiblecheckCentrifugal PumpsAPV RosistaPumps > Centrifugal PumpsBrand > APV Rosista What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU212T487 LocationBarneveld MakeAPV TypeWA-35/55-380 Mach.No.92214540915360000 Main Features MaterialStainless steel Volume300000 Ltr. Motor30 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity300 m3/h With motor30 kW 380/415 Volt (ABB)(Ex) Inletdia. 150 mm Outletdia. 100 mm Centrifugal Pumps MaterialStainless steel Information Year of construction1997 Total height0,6 m Floorspace1x0,7 m Weight390 kg ATEX compatiblecheckCentrifugal PumpsAPV RosistaPumps > Centrifugal PumpsBrand > APV Rosista What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU212T484 LocationBarneveld MakeAPV TypeW-25/200-380 Main Features MaterialStainless steel Volume300000 Ltr. Motor30 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity300 m³/h With motor30 kW 400-690 Volt (ATB Motortechnik)(Ex) Inletdia. 150 mm Outletdia. 100 mm Centrifugal Pumps MaterialStainless steel 1.4408 Information Mach.No.92214540915360000 Floorspace1x0,7 m Total height0,6 m Weight390 kg ATEX compatiblecheckCentrifugal PumpsAPV RosistaPumps > Centrifugal PumpsBrand > APV Rosista What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU316W650 LocationBarneveld MakeCoperion (type plate missing) TypeZVH-250.2-8SC Year of constructionUnknown Main Features MaterialStainless steel/chrome Motor0.55 KW Inlet diameter165 mm Specified Features - Rotating valve MaterialHard chrome, Stainless steel 1.4016, Stellite 1 Alloy Rotary valvecheck Rotor diameter200 mm Rotor width250 mm Number of locks:10 Lock sizes55x180x60 mm Capacityrotor ± 4,75 L Inlet165 mm Outlet50 mm Installation height360 mm With motor0,55 kW, 380/500 volt, 1400 rpm Rotor speed16,6 rpm Outside bearingscheck Information Mounted on framecheck Floorspace1,10 x 0,90 m Total height0,92 m Weight180 kg Technical specs Extra informationcapacity ± 4,7 m³/hRotating valvesCoperionRotary valves > Rotating valvesBrand > Coperion What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to ne ...
General SKU204U935 LocationBarneveld MakeSingle TypeSTW 200/1-24-60-H2.1 Mach.No.120712 Pressure Working pressure20 Bar Main Features Heating (medium)Steam Capacity24 KW Temp.200 °C Specified Features - Temperature control unit MaterialMild steel Temperating machinecheck Water heatercheck Heating medium:Water Heating capacity24 kW Electric capacity31,1 kVa, 42,3A With coolingcheck (no cooling compressor) Capacity69,6 kW Temperature+10/+200°C Tank capacity25 ltr. With pumpcheck CapacityQmax 200ltr/min, Hmax 80m, 2800 rpm Motor4 kW, 340-690 volt, With temperature controllercheck With controlTouchscreen Information Year of construction05-2012 Mounted on wheelscheck With switchcheck CEcheck Floorspace1,60x0,36 m Total height1,32 m Weight309 kg Extra Specificationstest pressure 32,5 barTemperature control unitsSingle TemperiertechnikHeat exchangers > Tem ...
General SKU204U937 LocationBarneveld MakeSingle TypeSTW 200/1-24-60-H2.1 Mach.No.083815 Pressure Working pressure20 Bar Main Features Heating (medium)Electric Capacity24 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating medium:Water Heating capacity24 kW With coolingcheck (No cooling compressor) Capacity69,6 kW Temperature+10/+200°C Tank capacity25 ltr With pumpcheck CapacityQmax 200 ltr/min, Hmax 80 m, 2800 rpm Motor400-690 volt, 4 kW, 2950 rpm With temperature controllercheck Information Year of construction2008 With switchcheck CEcheck Floorspace1,60x0,32 m Total height1,21 m Weight309 kg Extra SpecificationsPower 30.6 kVA, 44.2 A, test pressure 32,5 bar enclosure of machine not complete. Temperature control unitsSingle TemperiertechnikHeat exchangers > Tempera ...
General SKU204U940 LocationBarneveld MakeSingle TypeSTW 200/1-12-25-H2.1 Mach.No.083817 Pressure Working pressure20 Bar Main Features Heating (medium)Electric Capacity12 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Water heatercheck Electric heatingcheck Heating medium:water Heating capacity12 kW Temperature+10/+200°C Tank capacity24 Ltr. With pumpcheck CapacityQmax 200ltr/min, Hmax 80m, 2900 rpm Motor4,0 kW,400-690 volt, 2950 rpm With temperature controllercheck With controlcheck Information Year of construction2008 With switchcheck CEcheck Floorspace1,6x0,35 m Total height1,32 m Weight310 kg Extra SpecificationsPower 18.2 kVA, 26.4A Test pressure 32.5 bar Machine casing is not present. Temperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand > Sin ...
General SKU204U938 LocationBarneveld MakeSingle TypeSTW 200/1-24-60-H2.1 Mach.No.120711 Pressure Working pressure20 Bar Main Features Heating (medium)Electric Capacity24 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Water heatercheck Electric heatingcheck Heating medium:Water Heating capacity24 kW With coolingcheck (No cooling compressor) Capacity69,6 kW Temperature+10/+200°C Tank capacity25 ltr With pumpcheck CapacityQmax 200ltr/min, Hmax 80m, 2900 rpm Motor4,0 kW,400-690 volt, 2950 rpm With temperature controllercheck Information Year of construction5/2012 Mounted on wheelscheck With switchcheck CEcheck Floorspace1,6x0,35 m Total height1,32 m Weight310 kg Extra SpecificationsPower 31.1 kVA, 43.3ATest pressure 32.5 bar Machine casing is not present.Temperature control unitsSingle Temper ...
maximum number of results exceeded
please refine your search
