w 200 used for sale

Four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 200 mm -Passage: Ø 60 mm -Bolt circle: Ø 175 mm -Weight: 13.8kg

Flat pulley, belt pulley, drive pulley, roller pulley -Pulley: flat pulley material cast aluminum Ø 290 mm -Width 200mm -Intake: Ø 60 x 120 mm -Bolt circle: Ø 80 mm M6 -Dimensions: Ø 290 x 200 mm -Weight: 6.3 kg

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 1/200 -Grinding discs: max. Ø 200 x 32 mm -Motor power: 0.9kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 550/420/H1420 mm -Weight: approx. 72 kg

Height 2300 mm Width 2700 mm Length 2200 mm Weight 5000 kg Power supply: 400V 50Hz 3N Total power 102 kW Main Material Stainless steel, acid-resistant Cutter Type Vacuum Bowl Cutter Cutter bowl made Stainless steel, acid-resistant Bowl capacity 200 l Number of knives on the head 6 pcs. Knife shaft speed 680-5050rpm Bowl speed 4-16 rpm

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 12/200 -Grinding discs: max. Ø 200 x 32 x 51 mm -Motor power: 0.9 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 430/420/H1130 mm -Weight: 80 kg

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 12/200 -Grinding discs: max. Ø 200 x 32 x 51 mm -Motor power: 0.9 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 550/410/H1070 mm -Weight: 72 kg

Key data: 700 kN, 35 mm

used injection moulding machines ENGEL VICTORY 200-70 Tech Stock No.: 503473 Manufacturer: ENGEL Type: VICTORY 200-70 Tech Control: CC100 Year of Make: 2004 Hours: 77192 h Technical data closing page Clamping force: 700 kN Panel size h x v: 670 x 420 mm Min. installation height: 150 mm Plate spacing max.: 600 mm Opening travel: 450 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 675 kg Technical Data Spray Side Screw diameter: 35 mm Displacement: 154 cc Spray pressure: 1600 bar Screw length: 20 l/d Screw speed: 400 min Plasticizing current: 21 g/s PS Outdoor injection flow: 151 g/s hp Number of heating zones: 4 Nozzle travel: 250 mm Dimensions & Weight Machine dimensions LxWxH: 4.4m x 1.5m x 2m Total Weight: 5200KG Equipment Screen text German Screentext English  ...

V-belt pulley, pulley -V-belt pulley: pulley with 6 grooves -V-belt width: 17 mm -Holder: Ø38 x 80 mm -Dimension: Ø205 x 120 mm -Weight: 12.4 kg

Product number: 2948 Type: sect 200 Serial number: 273-00-129 Year of construction: 2023, NEW! Cutting diameter: max 200 x 180 mm Chamber length: 720 mm Thickness: 1 - 30 mm Speed: 210 / 420 cuts per minute Power: 3 x 400V, 50Hz, 3.5kW Dimensions: 2100 x 900 x 1200 mm Including extra knife

Conveyor belt / belt flap / accumulation conveyor Working height approx. 850 mm, can be adjusted. Length approx. 800 mm Width approx. 450 mm Equipped with photocell to stop product when downstream machine occupies. Equipped with function pass-through flap -> straps stop as soon as the flap is lifted. Equipped with its own drive and controls. Fixed transport speed, no frequency converter installed. Machine runs flawlessly. New conveyor belts were installed.

MACC Metal Circular Saw NEW 250 Saw blade Ø 250 mm Max. vise opening 100 mm Engine power (2-stage) 0.95 / 1.32 kW Speed 40 / 80 rpm Connection voltage 400 V Fuse 16 A Weight 91 kg Without a base, can be purchased separately.

Fermentolevain Fermento Plant for the preparation and preservation of liquid sourdough with Dual Care system for the best flavors Control of the fermentation phase and preservation phase easy-touch control Mixing time and speed can be adjusted Stainless steel Stirring tools removable with overflow probe and alarm buzzer 2 agitators, double lid Floor and side scrapers for more quality Outlet height 535 mm Tank capacity 200/250 kg Cooling capacity per hour approx. 6°C falling DGUV V 3 tested Connection 400V / 50Hz / 3,3kW, 16A-CEE plug Dimensions: 1040 x 1300 x 1810 mm, WxDxH New machine with 12 months warranty Optional: Built-in scale Water connection with hand shower Cleaning Cycle Maintenance contract Service Package Many more bakery machines in stock!

Injection mortar, two-component adhesive, chemical anchors -Manufacturer:BeA, industrial staples staples type HIT-HY 200-A -Quantity: 12 pieces of injection mortar available -Price: per piece -Transport dimensions: 270/100/H60 mm -Weight: 0.8 kg/piece

Data light barrier, retro-reflective light barrier, light barrier, optical data transmission -Manufacturer: Lenze, optical data transmission data light barrier -Type: DDLS 200/120.2-10 -Voltage: 18-30V DC -Dimension: 190/85/H110 mm -Weight: 1.2 kg

Inv. Num. : 7796 Type: HSA 200 T Producer: Hidroliksan Created: 2022 Parameters: Operating hours: 1600 h Compressive force: 200 t Maximum stroke: 450 mm Top table length: 1600 mm Top table width: 1400 mm Speed (high): 250 mm/s Speed (down): 160 mm/s Working speed: 5-18 mm/s Machine height: 5000 mm Machine length: 3650 mm Machine width: 3400 mm Machine weight: 18,000 kg

PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board -Manufacturer: Mikron, electronic module circuit board from CNC milling machine Mikron UME 600 -Type: 958 78 11 200 -Dimension: 145/110/H55 mm -Weight: 0.4 kg

Precision balance, spring balance, tension force gauge -Manufacturer: Pesola, precision spring balance type Macro-Line 80196 -Measuring range: 200 Newton -Division: 2 N -Dimensions: 400/40/H40 mm -Weight: 0.5 kg

Belt / roll width: 30 mm Mains voltage: 230V, 50Hz Paper from 70 g/m², film from 80μ (duplex film)

Electric motor, three-phase motor -Manufacturer: AEG, electric motor type AM 200 LZ2 -Power: 37 kW -Speed: 2925 rpm -Shaft: Ø 55 x 110 mm -Design: B3 -Dimensions: 735/480/H410mm -Weight: 288 kg

Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, valve drive, actuator, lifting drive, trapezoidal thread spindle -Manufacturer: Staff, screw jack -Type: Size 05 Version A -Useful stroke: 200 mm -Trapezoidal thread spindle: Ø 18 mm -Dimensions: 120/830/H315 mm -Weight: 2.2 kg

Heating, burner, gas burner, fan burner, gas fan burner -Manufacturer: Dreizler, fan burner type GE 200/300 AR 2 -Nominal heat output: 355 kW -Gas type: natural gas -Gas connection: 20 mbar -Blower motor: 0.37 kW -Dimension: 760/510/H535 mm -Weight: 33 kg

coolant capacity: 50 - 250 m3l/h Headroom: 5 - 12 m operating pressure: max 1,2 bar voltage: 380 V / 50 Hz motor type: 132 M 4 motor speed: 1500 U/min Motor Capacity: 7,5 kW weight: 250 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Fabr. no. 22/00-125616 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Etipack Strong 200 automatic labeller; cleaned and tested; Working width 20-200mm; Speed 20m/min.; Speed adjustable; with tripod. Automatic labeller Etipack Strong 200; cleaned and checked; working width 20-200mm; speed up to 20m/min.; adjustable in speed; included stand.

fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, fan motor -Fan: axial fan axial fan -Motor: Type D 564 0.11 kW / 1350 rpm -Total dimensions: Ø 440 x 200 mm -Weight: 3.5 kg

Fan, ventilator, blower, duct fan, pipe fan -Manufacturer: SEW-Eurodrive ebmpapst, fan blower ventilator -Type: A4S 200-AA 02-01 0.042 kW / 1350 rpm -Voltage: 230 V -Dimensions: 225/210/H210 mm -Weight: 2.9 kg

Sind cutter 200 liters with vacuum Type: SVC 200 Completely made of special stainless steel 200-liter bowl made of stainless steel Shaft speed 200/1800/3600 rpm Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in a set Dimensions: 260x220x195cm Electric power: 63 kW Voltage: 400 V, 50 Hz Weight 5.500 kg

Type: SC 200 Completely made of special stainless steel 200-liter bowl made of stainless steel Frequency speed regulation 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in set Machine dimensions in cm: Width: 220 Depth: 200 Height: 182 Electric power: 57 kW Voltage: 400 V, 50 Hz

power capacity: - kW tool adaptor: KOMET PKB 200-20-112 total power requirement: - kW weight of the machine ca.: 700 kg dimensions of the machine ca.: 1,6 0,7 1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Micrometer screws, micrometer screws, outside micrometers, outside micrometers -Manufacturer: Steinmeyer, micrometer -Measuring range: 175-200 mm -Reading: 0.01 mm -locking device -other sizes: also available -Case dimensions: 375/205/H35 mm -Weight: 1.3 kg

Key data: 3300 mm, 2300 mm, 1000 mm

Control Siemens 840D Table size 3,500 x 1,250 mm X-travel (longitudinal) 3,300 mm Y-travel (cross) 2,300 mm Z-travel (vertical) 1,000 mm Spindle HSK 100 Rapid traverse X-axis 25m/min Rapid traverse Y-axis 40m/min Workpiece weight 9.000 kg R.P.M. 100 – 12,000 kW 70 Volts 400 Cycles 50 Including: Automatic Tool Changer 60 tools Rotating B - C axis head: B-axis +/- 95 degrees – C-axis +/- 190 degrees.

V-belt pulley, belt pulley -V-belt pulley: 5-groove pulley SPB-200-5 -V-belt width: 17 mm -Holder: Ø60 x 50 mm taper clamping bush 3020 (Ø can be changed) -Dimensions: Ø200 x 100 mm -Weight: 12.1 kg

servo motor, electric motor, DC motor, stepper motor, stepping motor, compact asynchronous motor -Manufacturer: phytron, stepper motor type ZSS 52-200-2.5 25:1 -Manufacturer gearbox: Gysin type GPL 052-2S/25-1 i 1/7 -Dimensions: Ø 82 x 185 mm -Total weight: 2.9 kg

Key data: 750 kN, 35 mm

Engel - Injection moulding machine e - Max - 310/75 ( No.:2 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 34,527,644 pcs. - Operating hours: 98,349 h – In automatic: 54612 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 25 mm -Groove: 55 x 15 mm -Dimensions: 200/150/H150 mm -Weight: 9.9 kg

Key data: 750 kN, 35 mm

Engel - Injection moulding machine e - Max - 310/75 ( No.:3 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 41,658,321 pcs. - Operating hours: 103,302 h – In automatic: 65,611 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Key data: 750 kN, 35 mm

Engel - Injection moulding machine e - Max - 310/75 ( No.:4 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 42,349,940 pcs. - Operating hours: 100,778 h – In automatic: 67,929 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 200/90/H170 mm -Weight: 8,8 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 200 mm -Piston rod: Ø 35 mm -Holes: Ø 15 mm / Distance: retracted 520 mm -Dimensions: Ø 74 x 560 mm -Weight: 6.2 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 200 mm -Piston rod: Ø 16 mm / M12 -Holes: Ø 14 mm -Dimensions: 450/105/H100 mm -Weight: 3.8 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 200 mm -Type:B2-50/22x200 Pb10 TGL 10906 -Piston rod: Ø 22 mm / M18 -Holes: Ø 30 mm -Dimensions: 465/75/H90 mm -Weight: 6.6 kg

Key data: 400 mm, 1000 mm

Pinacho Mustang 200 - CNC lathe - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-cavity tool turret - Year of construction 2003 Specifications Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: 5 - Spindle speeds: 2 - Constant cutting speed: 0-700 / 700-3000 rpm Feeds: - Working thrust Z/X: 0 - 7000 mm/min - Rapid traverses Z/X: 10 m/min Tailstock: - Tailstock Ø: 58 mm - Tailstock shaft travel: 155 mm - Morse taper tailstock: 4 Engines: - Power main motor: 7.5 kW G0Cmy7Z - Power DC motor Z-axis: 12 Nm - Power DC motor X-axis: 4 Nm - Motor pump power:  ...

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 200 mm -Type: unfortunately without type designation -Piston rod: Ø 32 mm -Hole: Ø 20 mm / Distance: retracted 335 mm -Dimensions: 390/50/H55 mm -Weight: 3.9 kg

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Manufacturer: Forkardt, power chuck type KSH 200 -Chuck size: Ø 200 mm -Jaw width: 24 mm -Passage: Ø 49 mm -Mounting: Cone Ø 105-102 mm -Thread: M52 -Dimensions: Ø 200 x 130 mm -Weight: 23.1 kg

electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Manufacturer: Elsterwerda, magnetic clamping plate type ED 215 -Clamping surface: 200 x 150 mm -Connection: 220 Volt DC -Dimensions: 370/150/H80 mm -Weight: 14.3 kg

Clamping rail, guide rail, support rail, stop rail, T-slot rail -Clamping rail: with T-slot on both sides -Length: 200 mm -Groove width: 10 mm, dimensions see photo technical drawing -Dimensions: 200/55/H32 mm -Weight: 1.9 kg

coolant capacity: 10 m3l/h Headroom: 10 m operating pressure: 2 bar voltage: 420 V / 50 Hz motor speed: 1430 U/min engine output: 0,25 kW weight: 10 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Ref. no. 22/98-118884 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting kneader Diosna Kneader extendable Model: D 200 A for max. 200 kg dough/TA 160 (rye mixed bread dough) Stainless steel boiler 300 liters Dough machine with flour dust hood according to HACCP 2 tank cars with tilting device Stainless steel kneading arm with turning mechanism 2 gears, with protection circuit with timer DGUV V3 tested Connection 400V, 32A-CEE plug Used machine overhauled with 6 months warranty Option: Ground fastening Delivery Maintenance contract E-Box Service Package Many more lifting kneaders in stock!

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1800 mm -Cross-section: 200 x 60 mm -Recording: see photos -Transport dimensions: 2060/1080/H200 mm -Total weight: 487 kg

plastic strapping, strapping tape, packaging tape, tensioning tape, plastic tape -Strapping band: Plastic strapping band 8 rolls Ovp -Type: 5 x 0.5 mm core 200 mm -Width: 5 mm -Roll: Ø 395 x 190 mm -Price/Delivery: complete -Transport dimensions: 800/800/H390 mm -Total weight: 87 kg

used lifting mixer Diosna D 200 A Plus extendable, in baker's condition, checked and tested, works perfectly, 200 kg dough per kettle, 1 o'clock, 2 courses, with 1 stainless steel kettle, stainless steel kneading arm, if necessary with another kettle for an additional 4,000€