133,995 used machines on RESALE, but how to find them? Machine Search
Technical data of the pallet rack crossbar: Shelving system: Dexion (Hovik) Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material color: white I-profile: 100 x 50 mm Agraffe: 5 HK Clear width: 1,800 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
8 insert rollers for Kalmeijer. more on baemm.eu.
Technical data of the pallet rack crossbar: Shelving system: Dexion (Hovik) Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material color: white I-profile: 100 x 50 mm Agraffe: 5 HK Clear width: 950 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
used
Following Lub Oil Pump of MAK ENGINE is available for sale. Make ZPM GMBH Type WD5/WDU5-2-F Nr. 10010/6/2/2008 N 2000 1/min Q 685/780 L/min Bar 8/3
WMW Niles Ø 1400 x 2000 mm Distance between centers: 2000 mm Swing over bed: 1400 mm Swing over cross-slide: 1100 mm Swing in gap: 1800 mm Diametre of main spindle bore: 90 mm Power on main spindle: 14 kW Number of speeds: 382 rpm Chuck (3/4 pinch) -- diametre: 1200 mm
height of profile: 60 mm : 60 weight of the machine ca.: 188 kg dimensions of the machine ca.: 0,85 x 0,45 x 1,25 m foot switch: - Fabr.-No.: 292539 - pneumatic clamping head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Winfos Model: YC 180 Year of Manufacture: 2010 Type of Machine : Longitudinal Slitting Line In operation since: 2017 Condition: Operational Technical Specifications: - Line length: 24.5 m - Line width: 7.8 m - Material thickness: 1.5 ~ 5.0 mm - Maximum coil diameter: 1.8 m - Coil inner diameter: 640 – 800 mm - Maximum coil width: 1500 mm - Maximum coil weight: 16 MT - Installed power: 253 kW Line Speed: - At 1.5 mm thickness: 110 m/min - At 4.0 mm thickness: 95 m/min Tooling & Accessories: - Knives – 186 pcs total: - Set 1 – 10 mm, Ø307: 26 pcs - Set 2 – 14 mm, Ø315: 66 pcs - Set 3 – 14 mm, Ø315: 50 pcs - New Ø320: 44 pcs - Rubber rings – 93 pcs total: - Set 1 – 25 mm: 31 pcs - 15 mm: 12 pcs - Set 2 – 25 mm: 31 pcs - 15 mm: 18 pcs - Set 3 – 25 mm: 31 pcs - 15 mm: 18 pcs - Slitter knife spacers: 480 pcs - Separator spacers: - Metal: 252 pcs - ...
length: 700 mm width: 700 mm height: 630 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used machine, Woma / Kärcher Ecotherm, hot water Working pressure: 500 bar flow 27 lpm, Year of construction 2009 Drive: Diesel 36.5 kW, Kubota V 2403 Diesel Operating hours: approx.: 645 h,
Key data: 100 mm, 500 mm, 480 mm
Manufacturer: Brother Type: Speedio W-1000 XD1 Commissioning: 2024 Control type: CNC D00 and plain text dialog programming Axles: 4 X-travel: 100 mm Y-travel: 500 mm Z-travel: 480 mm + stand elevation 150 mm 4.Axis 360° Spindle speed: 16 -16000 rpm Spindle adapter cone: BBT-30 (BT-30) Tool stations: 21 (high-speed tool changer) Optional extras: Internal coolant supply 15 bar with self-cleaning pre-filter system Coolant tank 150 litres "Twin" chip disposal system for coarse and fine chips incl. filter system Automatic side door for robot loading Emulsion mist extraction for working area 700 m³/h CNC rotary table Brother T200 Ad.L clamped with counter bearing 2 x rotary union 4-flow Workpiece clamping hydraulic 80-210 bar Tool breakage monitoring Renishaw Laser Robot interface Part clamping control via differential pressure sensors (2-fold) ...
Two DM-323 electrical discharge machines are available. Operating hours machine 1/2: 12,134.51 / 32,704.5 h. Operating manuals and circuit diagrams available. An on-site inspection is possible.
Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net wei ...
Weibert BS 750E profi Log band saw The log band saw is designed exclusively for sawing soft, hard, dry, wet and frozen materials, tree trunks or prismatic workpieces. Their length depends on the design of the machine. The material is placed on the supports of the rail track and fastened. The sawing unit is fed manually. Max. trunk diameter 750 mm Max. width of the boards 730 mm Max. cutting length 3,700 mm (3.7 meters), expandable! Min. cutting length 900 mm (0.9 meters) Saw blade stroke min./max. = 20/540 mm Max. cutting depth 220 mm Wheel diameter/width = 400/25 mm Motor power 7.5 kW (5.5 kW S1/100%) Motor power height adjustment 0.12 kW Saw blade length 3,600 mm Saw blade speed 15 m/s Total length of the basic version 4,600 mm (4.6 metres) Weight approx. 450 kg Optional for an extra charge: Extension section 2.3m Aspirator Lathe rod
diameter: 800 mm roll surface width: 1800 mm heating system: Sattdampf 0 0: 860 Liter 0: 5 bar max. temperature: 168 ° C weight: kg range L-W-H: 2,2 x 0,8 x 0,8 m 4 pieces in total, drying drums Ø 800 mm, steam-heated, including pedestal bearings, foto no. 4 shows how the drying cylinder works. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height=0.98 m, Overall length= 0.56 m, Overall width= 0.86 m, Net weight= 115 kg,
Height=1.39 m, Overall length= 1.13 m, Overall width= 1.18 m, Net weight= 470 kg,
Height=1.75 m, Overall length= 0.75 m, Overall width= 1.35 m, Net weight= 17 kg,
Height=1.51 m, Overall length= 0.57 m, Overall width= 0.67 m, Net weight= 91 kg,
Height=1.835 m, Overall length= 2.32 m, Overall width= 0.8 m, Net weight= 446 kg,
Height=1.6 m, Overall length= 0.4 m, Overall width= 0.99 m, Net weight= 451 kg,
Height=1.68 m, Overall length= 2.27 m, Overall width= 1.48 m, Net weight= 936 kg,
Height=1.39 m, Overall length= 2.27 m, Overall width= 0.99 m, Net weight= 1282 kg,
Height=1.57 m, Overall length= 0.71 m, Overall width= 0.71 m, Net weight= 120 kg,
Height=1.78 m, Overall length= 0.88 m, Overall width= 1.39 m, Net weight= 305 kg,
Height=2.08 m, Overall length= 0.84 m, Overall width= 4.74 m, Net weight= 900 kg,
Height=1.62 m, Overall length= 0.8 m, Overall width= 0.6 m, Net weight= 220 kg,
Height=1 m, Overall length= 0.9 m, Overall width= 1.15 m, Net weight= 325 kg,
Height=1.3 m, Overall length= 1.1 m, Overall width= 1.6 m, Net weight= 1195 kg,
Rotary feeder, 1 valve station, bottom patch with 2 color tail end printers, pressing and packeting station
Technical data of the pallet rack crossbar: Shelving system: Arestant Type: AS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: orange Box profile: 100 x 50 mm Agraffe: 4 HK (hooks) Clear width: 1,805 mm 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.
Technical data of the pallet rack crossbar: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: 01x Pallet rack crossbar, used Material color: green Box profile: 155 x 55 mm Agraffe: 4 hooks Clear width: 3,610 mm 02x Locking pin, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.
Name: RYOBI 756 P Wide + LX ID PP-51060 Category 6-Colors Manufacturer Ryobi Model 756 P Wide + LX Year 2008 Color 6 Impression 45 Working Hours - Speed-- Max. size 60 × 78 cm Min. Size - Condition Good Location Europe Availability Immediately Description • 6 colors and varnish • Extended Delivery • Chamber Duct System: Harris + Bruno • Ink Remote Control: PCS-G • Combi Cooling Unit: ConTemp • Automatic Plate Change: SAPC • Inking Unit Temperature Control (Inking roller cooling) • Automatic Register Control • Automatic Wash-up System • Antistatic system • Grafix Digital 3000 IR Dryer
Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 80 x 50 mm Truss type: BX 80|50|13 Agraffe: 5 HK Clear width: 1,800 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.
Key data: 50 mm, 335 mm, 280 mm
Power: 7.8 kW Weight: 1,650 kg Table size: 630 x 500 Speed: 45 - 1,000 rpm Machine is ready for operation and can be dispensed immediately.
Unitech Boot wash station Stainless, two way boot wash station with fixed side brushes, turning horizonal brushes with water jets, overall length inc steps is 2400mm, overall width 850mm, 3Ph
Number of boring spindles: 4 St. Working width: 220 mm Working height: 120 mm Length of the planing table: mm Feed motor: 2,2 kW Feed speed: 5 - 22 , Stufenlos m/min. total power requirement: 17 kw Dimensions (L/W/H): 3.310 x 1.740 x 1.700 mm weight of the machine ca.: kg spindle diameter: 40 mm turning speeds: 6.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Wackerbauer Model: TM 75 Year of Manufacture: 2013 Type of Machine : separation mill Food waste (out-of-date and/or packaged food, manufacturing waste) from the food industry, organic waste, etc., is conveyed into the separation mill via a conveyor system. There, the material is unpacked, separated from impurities, and ground into a virtually impurity-free substrate with a two-dimensional grain size of max. 12 mm. Find more here - / Contact us at -
X-axis: 3050mm, Y-axis: 2050mm, Z-axis: 120mm, wavelength: 9.3-11.5µm, laser power: 300W, laser class: 1, operating pressure: 2bar, control: Beckhoff TwinCAT, length: 5050mm, width: 2950mm, weight: 3.8t, with CO2 laser Rofin Sinar SCX 30 HP 16.6, year of manufacture: 2022. An on-site inspection is possible.
turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - ...
turning length: 800 mm turning diameter: 280 mm turning diameter over slide rest: 150 mm spindle bore: 42.0 mm tailstock quill taper MT: 3 MK bed width: 208 mm turning speeds: 42 - 2022 U/min spindle taper: DIN 55027/5 quill stroke: 90.0 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 750 kg range L-W-H: 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80.0 t chamfer lenght: 2050 mm distance between columns: 1550 mm column arm: 250 mm table width: 85.0 / 135 mm stroke: ca. 390 mm dayligth: ca. 585 mm ajustment speed: 180 mm/sec working feed: 1.0 - 10.0 mm/sec return speed: 135 mm/sec work height max.: 1050 mm Number of working hours: 32.495 h oil volume: 200 l operating pressure: 320 bar total power requirement: 11.6 KW weight of the machine ca.: 7300 kg range L-W-H: 3700 x 2000 x 3000 mm Good/well-maintained condition () - in checked conditions - machinevideo - https://www.youtube.com/watch?v=IKyUmzB0WTI ------------------------------------------------- CNC electro-hydraulic press brake with: Increased installation height .. approx. 550 mm Increased cylinder stroke .. approx. 390 mm ------------------------------------------------- Features: - Robust electro-hydraulic press brake MADE IN GERMANY () - CYBELEC CNC control ...
turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - ...
turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - collet holder with lots of collets - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip spla ...
working area L-W-H: 900 x 700 x 750 mm compressed air: 5.0 - 8.0 bar Air consumption: ca. 800 l/min. Loading: max. 50 kg voltage: 400 V total power requirement: 1.32 kW weight of the machine ca.: 700 kg range L-W-H: 1200 x 1200 x 2100 mm Current new price approx. 23.000 Euro () Special price upon request Equipment: - Industrial sandblasting system - Work area: 900 x 700 x 750 - Perforated sheet = work grate with stable support - 2 side openings with locking doors - Continuous blasting pressure adjustment - Pressure gauge - Pressure indicator - Front viewing window - 1 free-moving foot switch - Blasting gun + blasting gloves 1 extra pair included - Operating instructions (PDF) Includes special accessories: - 1 WIWOX filter and recovery system Can be installed separately next to or behind the booth Can be moved on casters with a parking brake (see Figure 9 - system lying down for tra ...
turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet do ...
turning length: 1000 mm turning diameter over bed: 380 mm turning diameter over slide rest: 190 mm number of spindle speeds: 25 - 2000 U/min. turning speeds: 18 Stk. spindle bore: Ø 56,0 mm tailstock quill taper MT: DIN 228 / MK 4 quill stroke: 150 mm bed width: 310 mm spindle taper: DIN 55027 / 6 feeds - longitudinal: 0,022 - 0,8 mm/U feeds - cross: 0,011 - 0,4 mm/U thread: M 0,3 - 10,0 mm voltage: 380 V total power requirement: 7,5 kW weight of the machine ca.: 1600 kg Basic functions are available Machine with various leaks Sold in current condition at a special price ! Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. - machine video - https://www.youtube.com/watch?v=zCGu4i6V5dM Furnishing: - robust lead and pull spindle lathe - FORKARDT 3-jaw chuck Ø 200 mm, with chuck key - MULTIFIX steel holder - ...
Key data: 1100 mm, 1 t
Paternoster for sheet metal coils 7 gondolas, each with a usable width of 110 cm Load capacity 1300 kg Net weight 800 kg Height 235 cm
x-travel: 620 mm y-travel: 520 mm z-travel: 460 mm c-axis: 360 ° b-axis: -50 / +110 ° distance spindle nose and table: 170 - 630 mm CNC-control: iTNC 640 HEIDENHAIN Table dimensions: Ø 650 mm max. table load: 500 kg spindle turning speed range: 12.000 U/min drive capacity - spindle motor: 15,5 / 33,0 kW rapid traverse: 48 m/min tool change unit: 48 Pos. SK 40 coolant: IKZ 30 bar voltage: 400 V total power requirement: 35 kVA weight of the machine ca.: 10,0 t dimensions of the machine ca.: 4,00 x 2,46 x 2,85 m chip conveyor: 2,90 x 0,50 x 1,30 m coolant tank: 2,30 x 1,70 x 0,45 m coolant pump: 0,60 x 0,50 x 0,90 m Oil cooler: 0,55 x 0,60 x 1,10 m 5-axis simultaneous machining center - Serial-No.: 9496-117 - Control ON: 10,137 h - Spindle ON: 3,380 h - Control: HEIDENHAIN iTNC 640 - electr. handwheel - IKZ 30 bar - chip conveyor The data for this ad was created with ModulMWS - the sof ...
maximum number of results exceeded
please refine your search
