w 100a used for sale

Wachtel Infra deck oven, 5.1816, one pull-out stove, electric, with loader, with proofer, year of construction 2020-2022. Dismantled and stored. More info on request

Wohlenberg Guillotine with spare knife, in very good production ready condition. Gives exact cut and everything operational. Can be used to cut other materials rather than paper, such as vinal, plastic, tin, etc.

This shredder has a large diameter rotor (30 cm) and 12 rotating blades. The motor has an output of 4 kW. This shredder is equipped with a torque increase gear (reducing gear), so it is also suitable for shredding thicker plastic waste. The grid is interchangeable, so the grain size can be changed. Everything works fine, motor, bearings, gearbox, rotor, blade are all fine. It can be used immediately. I have several of them. Other shredders are also for sale. Please see my other ads.

Roka Werk Kippfix T20-E Fat Baker - Manufacturer: Roka factory - Type: T20-E - made of stainless steel - with 2 baskets - with lid - With hidden drain tap - with drainer tray / drainer - 1/N 230V - 3.2 kW Basin size: 50cm long 40cm cm 8.5cm deep

Sanding machine Brand: Ecoline Type: Windsand 4 New machine for sanding panels and glued frames. Technical data: Dimensions workpieces: Min. length: 500 mm Max. width: 1600 mm Max. height: 120 mm Number of shaft: 7 pcs. Power: 12 kW Air pressure: 6-8 bar Suction studs: 5 x Ø120mm Suction power: 6000m³/h Units 2 verticale swivable brushes (left / right), Ø 350 mm, for sanding the outer sides of the panels and window frames. Power of both brushes 0,55 kW 1 Deep brush, Ø 240 mm, for sanding the inner verticale sides and front sides of window frames. Power 0,55 kW 1 upper sanding lamella roller for surfaces, Ø 420 mm; length 1600 mm. Power 3 kW 3 upper sanding discs, Ø 400 mm, for the perfect crosswise process of the the lengthwise and crosswise positioned wood fibres. Power of each disc 1,5 kW; All tools are frequency controlled. Al ...

New brushing machine Brand: Ecoline Type: Windsand 3 New machine for sanding panels and glued frames. 4-side processing Technical data: Dimensions workpiece: Min. length: 500 mm Max. width: 1600 mm Max. height: 120 mm Number of shafts: 6 pieces Power: 12 kW Compressed air: 6-8 bar Suction stud: 5 x Ø120mm Suction power: 6000m³/h Unit - 2 vertical swivable brushes (left / right), diameter 350 mm, to sand the profiled surface of the panels and window frames. - Power of both brushes 0,55 kW - 1 Sanding lamella roller for surfaces, diameter 420 mm; length 1600 mm. - Power 3 kW - 3 upper sanding discs, diameter 400 mm, to process the lengthwise and crosswise positioned wooden fibres . - Power of each discs 1,5 kW; All tools are frequency controlled. All brushes are equipped with quick changable sanding lamellas. All discs will be equipped wi ...

Single sided postforming edge processing machine Brand: WEHRMANN   Type: Combima DPF New with 12 months warranty Example with typical equipment; almost each equipment is possible.  Please discuss your requirements with us  Technical data: Machine control: BECKHOFF route control with 15? Touch-Screen for pre-selection of units and for saving programs.  The workpiece transport via precision roller chain R75 with height adjustable top pressure.  Feed speed: max. V=6-30 m/min.  frequency controlled drive,  Top pressure: Motorical height adjustment via axis adjustment in program Right hand site equipped with 1 unit, width adjustment via NC axis: 1 Pre-milling unit With 1 motor with vertical shaft,  400 V, 12,5 KW, 100 Hz, 6000 rpm. Motor shaft Hydro D40 Swivable 90 - 180 degrees, move in/out for use Left hand site Seite: 1 Infeed fence  Infee ...

Spiked roller WEHRMANN for better gluing on solid wood / plywood

description: Limited opportunity! For sale are approx. 100 pcs. LED floodlights. Perfectly suitable for production halls / warehouses. The lamps were purchased approx. 2016 and have run approx. 35.000h since then. The manufacturer has stated that the lamps have run 80.000h, before the lighting effect can decrease. The new price was at that time after discount blow 400 / pc plus installation. The reason for the high price is also the advantage of a component system. Unlike many other systems, this one is replaceable / repairable LED/system power 120/135W; luminous flux 14.400 lumen; beam angle 120°; input voltage 100-240VAC 50/60Hz Information without guarantee Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and r ...

The scope of delivery includes: 01x Steel panel, used Material colour: sendzimir galvanised Total width: approx. 750 mm Total depth: approx. 1,150 mm Clear width: approx. 920 mm Truss support: approx. 58 mm Material thickness: approx. 2.00 mm Weight / piece: approx. 15,00 Kg Note: - The steel panels have a border for the trusses on one side. (Height: approx. 25 mm) - The other side is continuous and serves as a 22 mm high upstand Push-through protection! The following quantities are required for the following truss lengths: 2,250 mm – 03 pieces 3,000 mm – 04 pieces 3,750 mm - 05 pieces Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged sepa ...

Manufacturer: Wemhöner, Year: 1994, Type: Membranepresse, Number of tables: 2, Automatisches Rüsten: no, Pin-Sytem: no, Heating system: Thermoöl, Max.Teilegrösse mm: 3.200 x 1.300, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 3.200, Min.-max. workpiece height in mm: 10 - 50, Membrane: yes, Durchmesser Presskolben: ca 180, Placing table: 2, Membrane: yes, Pressing cylinder: 5, Landing opening mm: 220, Automatische Entleerung: yes, Folienschneidmaschine Hersteller: yes, Folienkalander: 16 Rollen, Foil cutter: 2, Year :1994

Manufacturer: Weger Zuluftgerät, Type: ZL 2113, Year: 2013, Control: no, Kw output: 22, Heizmedium : Warmwasser, Temperatur vor-rücklauf: 70/90, Taschenfilter Typ: yes, Fresh air m³/h: 42000, Fresh air m³/h: 42000, Year :2013

Manufacturer: Wipos Filteranlage, Type: ME 22 S, Year: 1995, Filter system - positive pressure: yes, Volume flow rate m³/h: 4100, Filter surface in m²: ca.50, Hose diameter in mm!: ca.150, Length of filter tubes: ca., Return air capable: no, Vibrator motors: yes, Star feeder: 3, Number of fans: 1, 1st transport fan - bunker kW: 5,5, Year :1995

Manufacturer: Wandress, Type: CH 29M/1650 BI 99DS/3/1650, Year: 2002, Control: yes, Dust removal brush: yes, Brush type: Riemen, Number of units: 2, kW Leistung Motoren: 0,5, Number of rotations controlled: yes, Units mounted upright: yes, Working width mm: 1700, Through running hight mm: 120, Roll transport: yes, Feeding speed continous adjustable: yes, Feeding speed min-max m/min: 5-20, kW-Vorschub: 0,75, Electrical hight adjustment: yes, rotor jets: no, FREE TEXT: Vorgeschaltete Entstaubung im High Speed channel HSC 50/2/1650/ Arbeitshöhe 1100 mm, Year :2002

Manufacturer: Wandress Bürstenmaschine Unten 1 Bürste, Type: CM29/950/1500, Year: 2006, Control: Siemens, Dust removal brush: yes, Brush type: Fibre, Number of units: 1, kW Leistung Motoren: 1 x 0,9, Working width mm: 1500, Through running hight mm: 95, Roll transport: yes, Feeding speed continous adjustable: 3 - 120, Feeding speed min-max m/min: links, kW-Vorschub: links, Fixed edge on left: yes, Fixed edge on right: yes, Ionising: 2 x 150, rotor jets: 800, Year :2006

Manufacturer: Uffe Sass, Type: Werkstückwender, Year: 1998, Control: no, Work piece width min-max mm: 500-1300, Min.-max. workpiece length in mm: 500-2800, Min.-max. workpiece height in mm: 10-60, Continous adjustable feeding speed m/min: möglich, Feeding engine kw: 2 X 1,0, Working hight mm: max 60/veränderbar, Klemmun Pneumatisch: yes, Single machine: möglich, Machine from production line: möglich, Belt width: 1300, Total lenght: 3000, Feeding speed max m/min: über Umrichter variabel, Working hight adjustable mm: yes, Year :1998

Manufacturer: Weger Zuluftgerät, Type: ZL 30 S, Year: 2013, Control: no, Zuluftleistung m³/h: 6000, Kw output: 2,2, Heizmedium : Warmwasser , Temperatur vor-rücklauf: 90-70, Taschenfilter Typ: yes, Pumps: no, Year :2013

Manufacturer: Weeke BHH 40 Durchlaufbohrmaschine, Type: BHH 40, Control: Woodwoob, Work piece width min-max mm: 30-800, Min.-max. workpiece length in mm: 250-2200, Min.-max. workpiece height in mm: 12-50, Automatisches Rüsten: yes, Automatic width adjustment: yes, Dowel tools Qty: 4, Dovel diameter mm: 8 X 30, Dovel lenght mm: 30, Min - max dowel centre-to-centre distance mm: 32, Schwingförderer Rohre : 4, Drilling support horizontal: 2, Working range max mm: max.60, Dovel units: 6, Work piece refeeding: yes,

Manufacturer: Indramat, Type: DDS03.1-W050-D, Model: FWA-DIAX02-ASE-02VRS-MS, Serial number: SN268778-18301,

Manufacturer: Weinig, Type: Kettenförderssysteme Vereinzelung, Working length mm: 6500 mm, Working widht mm: 2600 mm, Own controller: no, Engine power kW: ca 5, Working hight adjustable mm: 900 mm, FREE TEXT: 5 Mitnehmer Ketten mit 170 mm Abstand,

Manufacturer: Weinig, Type: H 17 AS, Year: 1986, Planing widht mm: 230, Number of spindles: 9, Tool exchange places: yes, Separate engine per spindle: yes, Feeding - kW: 11, Feeding speed min-max m/min: 60, Feeding speed continous adjustable: yes, Table length: ca. 4000 mm, 1.Bottom spindle kW: 4, 2nd spindle on right kW: 4, 3.Left spindle kW: 5,5, 4th spindle on right kW: 4, 5.Top spindle kW: 7,5, 6th spindle at bottom kW: 5,5, 8th spindle at bottom kW: 7, 8th spindle on left kW: 4, 10th universal on left kW: 5,5, FREE TEXT: Inverter for feeding., Year :1986

Manufacturer: Sorbini / Tagliabue, Type: Walzstrasse, Year: 1998, Work piece width min-max mm: 1.300, Min.-max. workpiece height in mm: 3 - 80 , Min.-max. workpiece length in mm: 300, Feeding speed min-max m/min: 6 - 24, Inlet conveyor: yes, Lackwalze 1: T/20-MF, UV Trockner 1: 1 Lampe, Lackwalze 2: T-20-MF, UV TRockner2: 3 Lampen, Lackwalze 3: T-20MF, UV Trockner 3: 3 Lampen, Paint sander: TAG 13KS DPSTRA, Paint rollers: 3, Year :1998

Manufacturer: Weinig, Type: Unimat 17, Planing widht mm: 170, Planing hight mm: 120, Spindle diameter in mm: 35, Rotations of spindles max. rpm: 6.000, Spindle arrangement: U / R / L / R / O / U, Feeding - kW: 4, 1.Bottom spindle kW: 4, 3.Left spindle kW: 3, 4th spindle on right kW: 3, 5.Top spindle kW: 4, 6th spindle at bottom kW: 4,

Manufacturer: Wemhöner Membranenpresse, Year: 1996, Type: KT-VP 28, Number of tables: 1, Automatisches Rüsten: no, Pin-Sytem: no, Heating system: Elektro, Nutzfläche : 2500 X 1300, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10--60, Working widht max mm: 1300, Press length mm: 2500, Pressing width mm: 1350, Kw Heizleistung obere Heizplatte: yes, Max. temperature °C: 220, Foil magazin spaces: 8, Veneer/ foil thickness max mm: möglich, Through running machine: yes, Folienpaternoster: yes, Through running machine: yes, Year :1996

Manufacturer: Wandres, Type: CH 29/1100/2750, Year: 2002, Dust removal brush: yes, Number of units: 2, kW Leistung Motoren: ca 2, Units mounted upright: yes, Working width mm: 2.750, Year :2002

Manufacturer: Wemhöner, Spare part from machine: Doppelendprofiler, Type: Wemhöner, Year: 2006, Quantity: 4 Sätze komplett mit Gegendruckkufen, FREETEXT1: bestehend aus, FREETEXT2: 4 StückOberdruckkufen, FREETEXT3: 4 Gegendruckkufen, FREETEXT4: 4 Wechseldruckdufen mit Druckluft Unterstützung, Year :2006

Manufacturer: Weber, Type: K 1-1100 V, Year: 2001, Monting of the machine: Walze, Double sided sanding line: no, Sanding width mm: 900, Sanding hight mm: 100, Number of sanding belts: 1, Continous adjustable feeding speed m/min: 2 - 14, Feeding engine kw: 1,3, Sanding belt dimensions: 2.620 x 1.150, Table hight adjustment by engine: no, Rollers: 1, Power belt 1 in kW: 15, Intermediate sanding of lacquer: no, Vacuum table: 2,2, Noise enclosure: yes, Brushing unit: 0,55 kW, Year :2001

This 4-axis TOS WHN 9 B CNC boring machine was manufactured in 2007. It features a cross travel of 1370 mm and a longitudinal travel of 1130 mm, with a table clamping surface of 1120 x 990 mm. The machine is equipped with a spindle diameter of 90 mm and a spindle speed range of 9–1120 rpm. If you are looking to get high-quality boring capabilities, consider the TOS WHN 9 B CNC machine we have for sale. Contact us for further details.

Manufacturer: Weeke, Type: BHX 500, Year: 2007, Work piece width min-max mm: 70 - 1.000, Work piece length min-max mm: 200 - 2.500, Work piece thickness min-max mm: 4 - 80, Working range X: 2.500, Working range Y-axis: 1.000, Working range Z: 80, Vertical drilling station from below: 32, Vertical drilling station from above: 32, Drilling supports horizontal: 2, Horizontal drills-X: 2 x 8, Drill horizontal Y: 2 x 2, Number of spindles: 1.500 - 7.500, Number of spindles: 1.500 - 7.500, Year :2007

Manufacturer: Weinig, Type: Unimat 17, Planing widht mm: 180, Planing hight mm: 120, Number of spindles: 7, Elektronische Achsverstellung: no, Work piece width min-max mm: 180, Min.-max. workpiece length in mm: 350, Wellendrehzahl: 6000, Spindles: 6, Spindle diameter in mm: ca 40, Spindle arrangement: U / R / L /R / O / U / Uni, 1.Bottom spindle kW: 4, 2nd spindle on right kW: 4, 3.Left spindle kW: 4, 4th spindle on right kW: 4, 5.Top spindle kW: 4, 6th spindle at bottom kW: 4, 7th universal on left kW: 4,

Manufacturer: Wagner, Type: Finisch 500, Year: ca.2005, Wasserbasierend Lacke: yes, 2K-Lacke möglich: yes, Elektr. pump: yes, Laquer reservoir litres: ca.10 Liter, Flushing circuit: yes, Movable: yes, Spray gun manufacturer: Wagner, Spraying stations: 1, Fast exchange system spray gun carrier: yes, Laquer circles: 1, Laquer system - airless: yes, Electrical power consumption kW: 2,8, Transmission ratio: 250 bar, Conveying output l/min: 5,7, Delivered checked: yes, Wight approx. kg: 52, FREE TEXT: 220 Volt/2,8 Kw/Gewicht 52 Kilo/zusätzliche Schläuche/2 Stück Sprühlanzen/ , Year :ca.2005

Manufacturer: Wemhöner Stapelwender, Work piece width min-max mm: 800, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 1300, Feeding engine kw: yes, Working hight mm: 320, Roll transport: yes, Single machine: yes,

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder, control cable, control line -Manufacturer: Wieland, control cable for crane remote control -Cable length: 5 m -Connector: DSE connector 16-pin -Transport dimensions: Ø 400 x 130 mm -Weight: 3.8 kg

Manufacturer: Weeke, Type: BST 50, Year: 1992, Program-controlled: yes, Work piece width min-max mm: 100-1050, Min.-max. workpiece length in mm: 350-2600, Min.-max. workpiece height in mm: 10-60, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 60, Drilling support horizontal: 2, Drilling supprt from bottom: 6, Drill support from top: keine, FREE TEXT: inkl Bohrhetriebe, Year :1992

Manufacturer: Weeke, Year: 1996, Type: Frässpindel, Motor mit Getriebe: Werkzeugaufnahme HSK 63, aus Maschine: BP 155, Power kW: 7,5/10, N1-U/min: 750-18000, Motor mit Getriebe: Werkzeugaufnahme HSK 63, FREE TEXT: inkl Drehmotor für C Achse, Year :1996

Manufacturer: WMS, Type: 20051, Year: 2001, Control: Hand, Pneumatical clamping system: yes, Saw blade tiltable up to °: 90-45, Schnitthöhe min-max mm: ca.100, Schnitttiefe min-max mm: 400, Schnittlänge min-max mm: 2110, Width adjustment by engine: yes, Saw blade diameter max mm: 450, Hauptmotorsäge kW: 4, rotations controlled: 2860, Year :2001

Manufacturer: Wemhöner, Year: 1997, Type: KTV 28/15 - 165, Work piece width min-max mm: 1500, Min.-max. workpiece length in mm: 2800, Min.-max. workpiece height in mm: 10-40, Max. temperature °C: 90 / 180, Placing table: yes, Through running machine: yes, Pressing cylinder: 6, Pin system: no, Landing opening mm: 1, Foil cutter: yes, Through running machine: yes, Year :1997

Manufacturer: Walther + Cefla UV, Type: Pilot Signier + UV 2000, Spraying line: yes, Work piece width min-max mm: 1300, Spraying machine: Walther, UV dryers - 4 lamps (number): 1,

Manufacturer: HWS Wickelautomat, Type: HWS-S20, Year: 2001, Control: Programm, Work piece width min-max mm: 300-1500, Min.-max. workpiece length in mm: 400-2500, Min.-max. workpiece height in mm: 300-1600, Belt tension adjustable: yes, Function repeat: yes, Chassis: Rollenbahn, FREE TEXT: inkl Druckschuh von oben, Year :2001

Manufacturer: Weinig , Type: Unimat 17 A, Year: 1979, Control: hand, Planing widht mm: 10-170, Planing hight mm: 10-120, Min.-max. workpiece length in mm: 300, Number of spindles: 6, Diameter of the spindle mm: 30, Fast exchange device: no, Rotations of spindles max. rpm: 6000, Separate engine per spindle: yes, Fully suspended drive feeding: no, Year :1979

Manufacturer: Bohreinheit , Type: Bohrtgetriebe mit Vorlegeeinheit, Year: 1999, Special bore gearbox: yes, Stück Bohrgetriebe : 2, Number of drilling spindles: 2, Grid: 32, Steel drilling head: yes, Run on the machine: Weeke, Quick-change lining: yes, Price per unit Euro: 1500, Available: sofort, FREE TEXT: Kw-Leistung 1,5/ 2000/3360 U/min, Year :1999

Manufacturer: Bohreinheit , Type: Bohrtgetriebe mit Vorlegeeinheit, Year: 1999, Special bore gearbox: yes, Stück Bohrgetriebe : 2+ 1, Number of drilling spindles: 18/3, Grid: 25, Steel drilling head: yes, Run on the machine: Weeke, Quick-change lining: yes, Price per unit Euro: 1500, Available: sofort, FREE TEXT: Kw-Leistung 1,5/ 2000/3360 U/min, Year :1999

Manufacturer: Wagner, Type: GM 200, Spraying heads - total: 1, Compressed air bar max: 250, Laquer reservoir litres: 20, Spray gun manufacturer: GM 2000, Spraying stations: 1, Laquer circles: 1, Laquer system - airmix: yes, Electrical power consumption kW: 0,76, Wight approx. kg: 32,

HBM Wotan WMO B105, CNC control system Siemens 820M

DC motor Stromag 70 kW, gearbox 2 x 960 Nm, with Coperion ZSB 70 side feed. The worm shafts and the end head are missing. Therefore, sales as spare parts carriers.

Number of boring spindles: 8 St. Working width: 20 - 230 mm Working height: 8 - 120 mm Length of the planing table: 2.500 mm Feed motor: 4 kW Feed speed: 5 - 24 m/min. total power requirement: ca. 60 kw Dimensions (L/W/H): mm weight of the machine ca.: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the pallet rack crossbar: Shelving system: Nedcon Type: NS The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Box profile: 130 x 50 mm Clasp: 7 HK (hooks) Clear width: 3,700 mm Max. load per pair of trusses 3,000 kg at the same weight. Distributed load 02x Locking pin, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Thread milling and hobbing machine Wanderer 31 NU Machining length 3000 mm With accessories

max. wheel diameter: 400 mm gear width: 275 mm gear width: 275 mm max. module: 6 weight of the machine ca.: 5,5 t shifting: 100 mm dist. cutter spindle - workpiece spindle: 40/265 mm hob turning speeds: 50-400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 x CNC bench boring machine in cross-bed design Manufacturer: TOS Type WH13 CNC Year of manufacture 1997 Control: TNC 426 Heidenhain 5-axis X-3500 mm Y-2000 mm Z-1250 mm B-800 mm B-360 Degree Table clamping surface: 1600 x 1800 mm Table load: 12 t Spindle diameter: 130 mm Spindle mount: ISO 50 Spindle speed: max. 1500 rpm Condition: Very good. The machine was only used for repair purposes; no contract manufacturing. Spindle hours: 22,054 Program runtime: 15.661