w 100a used for sale

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Claw coupling: elastic claw coupling -Hub bore: Ø 55/40 mm -Quantity: 1x coupling available -Dimensions: Ø 128 x 145 mm -Weight: 6.1 kg

Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible.

Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible.

Bed length: 4500mm, control voltage: 220V, operating voltage: 380V, rated current: 110A, rated current, slow-blow fuse: 125A, connected load: 58kW, weight: 35t, with tailstock, clamping device, external electric motor for roll rotation, control panel, storage table, five steady rests and additional accessories. An on-site inspection is possible.

Drum speed: 4500/min, drum diameter: 650mm, permissible density of centrifuged material, heavy liquid: 1,1kg/dm³, solids: 1,3kg/dm³, control panel: Siemens SIMATIC HMI. Maintenance was carried out every two years by a specialist company, new control system installed two years ago, very good condition, no maintenance backlog, with documentation. An on-site inspection is possible.

Ball screw INA ZKLF 2068.2RS NA ( ZKLF2068.2RSNA ) 02/W6 ASP 14-20 ( 02/W6ASP14-20 ) thread length: 845 mm thread: Ø 32 mm pitch: 4 mm for AGIE CUT 300 used, tested ! Dimensions: 1200 x 210 x 125 mm

Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Durchlauföfen Herdwagenöfen Kammeröfen Schachtöfen Schmelzöfen Industrieöfen gebraucht Industrieöfen Neubauten Industrieöfen gebraucht Plasmanitrieranlagen Drehherdöfen Drehtrommelöfen Durchlauföfen Herdwagenöfen Induktionshärteanlagen Kammeröfen Ofenanlagen Schachtöfen Vakuumöfen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Härt en GlühenNormalisieren Weichglühen Isothermglühen Vergüten Anlassen Entspannen Hubschritt-Kettenförderofen Ringherdofen Kammerofen Durchstoßofen Drehherdofen Rollenherdofen Gußplattenbandofen Reinigungsanlagen

Diesel Fuel Tank 4.500 Liter, 4.500 Liter Tank, UL142 Certified

Diesel Fuel Tank 1000 Liter, 1.000 Liter Tank, KIWA Certified; Gross weight [kg]: 540

Diesel Fuel Tank 2.000 Liter, 2.000 Liter Tank, KIWA Certified; Gross weight [kg]: 823

Double bench grinder WMW Type ST300 Year: 1970 Disc drm.: 300 mm Power: 1.1 kW Dimensions: 750 x 420 x 1200 mm

CNC Press Brake manufactured in 2024. This DAMAMT WC67K 63T/2500 CNC features a pressing force of 63 tons and a bending length of 2,500 mm. It includes advanced CNC control with 4+1 axes and motorized V-axis crowning for precision bending. If you are looking to get high-quality bending capabilities, consider the DAMAMT WC67K 63T/2500 CNC Press Brake we have for sale. Contact us for further details.

Lapping machine Wentzky - Lapping discs diameter 700 mm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Weingarten Eccentric Press AV10 - With pliers feed - Reel and reel - When pressing, the speed can be set up with a frequency converter - Press force: 10 t - Stroke rate: 160 / min - Plunger stroke: 6-60 mm - Plunger adjustment: 40 mm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Used slow speed ball mill for the production of chocolate creams made by Techmasz model: WMK350. New 2019. The offer consists of: - 2x WMK350 ball mill - 2x chocolate pump with water jacket + piping - 1x DUO fat melting tank The slow-running ball mill was manufactured mainly for the food industry. Its technical parameters allow it to meet the high requirements of this industry. Technical data: - Mixer drive: Nord SK2282 VF - 112 MH/4 geared motor controlled by NORD inverter type SK500E-401-340 - Coupling type: Maintenance-free flexible torsion coupling size 75 with 92 Sh A coupling. - Agitator speed control: In the range 20-80 rpm - Noise level: Less than 85 dB(A) - Ball diameter/type: 13 mm/91 kg (approx. 10000 pcs.) - Usable volume of mixing chamber: Min. 11.50 l., Max. 342.00 l. The total capacity of the mixing chamber is 346 litres - The usable capacity of the m ...

Welding frame dimensions: 450x550mm, applicable films: POF/ PP/ PE/ PVC, max. film thickness: 50μm, weight: approx. 150kg, with Nero shrink tunnel system TBS PACK STA-3528 and documentation. On-site inspection is possible.

12 pieces twist drill MK4/5 Ø 33 to 62 mm + drill chuck Röhm 1.) Drill MK5 Ø 62 x 240 mm, useful length 240 mm, Total length: 415 mm, weight: 4.3 kg. 2.) Drill MK5 Ø 58 x 200 mm, WERKÖ, useful length: 200 mm, Total length: 370 mm, weight: 3.45 kg. 3.) Drill MK5 Ø 53 x 174 mm, Wesselmann Presto, Effective length 174 mm, total length 338 mm, weight 3.70 kg. 4.) Drill Ø 52 mm x 238 mm, A stick, useful length 238 mm, Total length 408 mm, weight 3.65 kg. 5.) Drill MK4/5 Ø 50 x 220 mm, useful length: 220 mm, Total length: 365 mm, weight: 2.30 kg. 6.) Drill MK4/5 Ø 50 x 135 mm, Hartner, usable length 135 mm, Total length 330 mm, weight: 2.75 kg. 7.) Drill MK4/5 Ø 49 x 220 mm, Hartner, usable length 220 mm, Total length 415 mm, weight: 3.4 kg. 8.) Drill MK4/MK5 Ø 45 mm x 225 mm, Stick A, usable length 225 mm, Total length 415 mm, weight 3.05 kg. 9.) Drill MK4 ...

Technical data of the pallet rack crossbar: Shelving system: Feralco Year of Make: 2021 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 80 x 50 mm Truss type: 80 E15 Agraffe: 3 HK (hook) Clear width: 2,700 mm Max. load per pair of trusses 1,500 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Tool grinding machine WMW SWA 200 grinding diameter max Ø 600 mm grinding length max 470 mm table movement longitudinally 470 mm Tool holder MK2 swivel 0-6 °, 90° Speed range: 1260 - 3100 rpm 0,0.0 4 kW 220 / 380 V used, tested ! Dimensions: 1100 x 1100 x 1500 mm

FG Wilson P1100-1 - Unused - 1100 kVa

Indramat DDS02.1-W150-0

Dimensions (L/W/H): 2650x950x1850 mm Weight: 2100 kg Total power requirement: 15 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the pallet rack crossbar: Shelving system: Bito Type: PL 38 The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Box profile: 110 x 50 mm Truss type: PT27.112LN Agraffe: 3 HK (hook) Clear width: 2,700 mm Max. load per pair of trusses 3,000 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2016 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2017 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2018 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2019 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2020 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2021 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2022 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2023 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Distance between centers: 1500mm, swing over bed/cross slide: 620mm/400mm, control: Heidenhain ManualPlus 420. The machine has been in daily single-shift operation since 2008. An on-site inspection is possible.