w 100a used for sale

Immediately available completely overhauled shop air coolers

Immediately available used injection line

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.45 m -Transport dimensions: 600/460/H80 mm -Weight: 3.9 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.35 m -Plug: missing -Transport dimensions: 500/480/H90 mm -Weight: 4.1 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.30m -Transport dimensions: 600/420/H90 mm -Weight: 3.8 kg

Crane block, crane hook, load hook, single hook -Crane hook: load hook with adapter frame -Load capacity: 7.5 t -Dimensions: see photos -Transport dimensions: 860/470 (H460 mm -Own weight: 77 kg

Immediately available used hand pump

Immediately available used fuel transfer pump

Immediately available used lubricating oil coolers

Immediately available overhauled lubricating oil pump, even used ones we have all in stock

Immediately available used idler gear

electric motor, three-phase motor -Condition: unused -Manufacturer: Weg, electric motor type W22 315S/M-04 -Power: 132 kW -Speed: 1488 rpm -Shaft: Ø 80 x 170 mm -Design: B3 -Protection class: IP 55 -Dimensions: 1280/640/H845 mm -Weight: 991 kg

MIG/MAG hose assembly, MIG/MAG welding torch, MIG/MAG hose assembly extension, intermediate hose assembly -MIG/MAG hose package: water-cooled extension -Length: 9.65 m -Connector: 24/37-pin / see photos -Dimensions: 670/550/H150 mm -Weight: 14 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.3 m -Transport dimensions: 500/400/H110 mm -Weight: 3.5 kg

Immediately available used intermediate gear

Immediately available used gear camshaft

Immediately available used fuel double filter

Immediately available used exhaust gas compensator

Immediately available overhauled gas-oil flow covers, also used ones we have all in stock

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.3 m -Transport dimensions: 500/440/H80 mm -Weight: 3.3 kg

Used crankshaft immediately available

Immediately available new

Immediately available used emergency shutdown

Connectors, plugs, 1-wire female connector, -Manufacturer: Wago, 1-conductor female connector Box with 50 pieces -Type: 734-107/037-047/ 7-pin -Quantity: 7x box available -Price: per box -Dimensions box: 200/145/H40 mm -Weight: 0.4 kg/carton

We offer: a construction dryer Make: Wilms Model: Heating Cannon Heater Hot Air Blower Construction Dryer Nominal voltage/ current type: 220 V Fuel: Fuel oil Subject to changes and errors. Sale under exclusion of any warranty and liability for material defects.

Cylinder Head Overhauled PHASE I and PHASE II Also used immediately available

Connectors, plugs, 1-wire female connector, -Manufacturer: Wago, 1-conductor female connector Box with 60 pieces -Type: 769-103 3-pin -Price/Delivery: complete -Dimensions box: 290/130/H70 mm -Weight: 0.6 kg

Connectors, plugs, 1-wire female connector, -Manufacturer: Wago, 1-conductor female connector Box with 50 pieces -Type: 769-102 2-pin -Price/Delivery: complete -Dimensions box: 280/80/H60 mm -Weight: 0.4 kg

clutch, power clutch, gear clutch, transmission clutch -Clutch: Gear clutch with duo sealing rings -Hole shaft: Ø 125 x 125 mm -Flange: bolt circle Ø 265 x 13 mm -Dimensions: Ø 294 x 125 mm -Weight: 26.8 kg

clutch, power clutch, gear clutch, transmission clutch -Clutch: Gear clutch with duo sealing rings -Hole shaft: Ø 125 x 125 mm -Flange: bolt circle Ø 265 x 13 mm -Dimensions: Ø 294 x 125 mm -Weight: 27,1 kg

thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: WMW ABW, thread cutting chuck holder MK2 2 pieces -Type: GB2a -Bore: 1x Ø8 mm / 1x Ø5 mm -Delivery/Price: complete -Transport dimensions: 220/130/H63 mm -Weight: 3.0 kg

Angle connectors, angle connectors with web, heavy-duty angle connectors, perforated plate angles, perforated angles -Manufacturer: GH, angle connector with web 29 pieces -Type: GH-WVB 105x105x90x2.0mm -Price/Delivery: complete -Weight: 0.3 kg/piece

Angle connectors, angle connectors with web, heavy-duty angle connectors, perforated plate angles, perforated angles, wood connectors -Manufacturer: GH, angle connector with web 27 pieces -Type: GH-WVB 90/100S 100x100x90x3 mm -Price/Delivery: complete -Weight: 0.4 kg/piece

Angle connectors, angle connectors with web, heavy-duty angle connectors, perforated plate angles, perforated angles, wood connectors -Manufacturer: GH, angle connector 19 pieces -Type: GH-WVB 90/100S 100x100x90x2 mm -Price/Delivery: complete -Weight: 0.2 kg/piece

Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, pull-down clamp -Manufacturer: WILA, stable clamping jaw height adjustable -Clamping jaw: 120 x 45 mm -Clamping height: 85 - 105 mm -Groove width: 28 mm -Dimensions: 240/120/H90 mm -Weight: 10.6 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump -Manufacturer: Werie Rietschle, rotary vane vacuum pump type CLE15 DV -Suction capacity: 15 m³/h -Drive: Bauknecht 0.75 kW / 1400 rpm -Overall dimensions: 550/300/H320 mm -Weight: 37 kg

Reamer, twist drill, drill bit -Manufacturer: Werkö, twist drill Ø 66.0 mm -Recording: MK5 -Type: Two-cutter 66.0 x 630 HSS -on request: different sizes/quantities available from additional stock -Transport dimensions: Ø 66 x 780 mm -Weight: 10.6 kg

gear motor, electric motor, three-phase motor -Manufacturer: Weg, gear motor type ODGM 734 -Speed: 94 rpm -Power: 0.37 kW -Shaft: Ø 20 x 40 mm -Dimensions: 180/160/H390 mm -Weight: 12.8 kg

collet chuck, tool holder, tool holder, milling chuck, milling tool -Collet holder: SK40 -Bore: Ø 16 mm -Total dimensions: Ø 64 x 170 mm -Weight: 1.0 kg

roller chain, drive chain, single roller chain -Manufacturer: Witra, drive chain single roller chain type 20B -Length: 3200 mm -Pitch: 31.75 mm 1 1/4 / Width 43.2 mm -Rollers: Ø 19.05 mm -Quantity: 36x roller chain available -Price: per chain -Package dimensions: Ø 330 x 180 mm -Weight: 11.9 kg/piece

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, corner milling cutter -Manufacturer: Widax-Heinlein, face milling cutter SK50 -Type: M100 239.10.220 Ø80 41005 -Number of teeth: 6 -Dimensions: 95/90/H230 mm -Weight: 4.0 kg

bore capacity in steel (diameter): 4 / 6 mm turning speeds: 650 - 12.000 U/min table surface area: 180 160 mm spindle cone: B 10 bore stroke: 50 mm total power requirement: ? kW weight of the machine ca.: 50 kg dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

shell end mills, indexable insert mills, porcupine mills, milling tools -Manufacturer: Widax-Heinlein, shell end mills, indexable insert milling cutters SK50 -Type: M30 229.34.800 7 04 09 -Diameter: 61 mm, without inserts -Dimensions: Ø 97 x 235 mm -Weight: 3.8 kg

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK50 holder -Type: 50 x 50 x 630 mm -Dimensions: Ø 100 x 850 mm -Weight: 23.5 kg

WEINGARTEN DE 200-20 press built in 1975 in Germany is used for precision workpiece machining. The rigid construction combined with a high press force of 200 tonnes make the machine the perfect solution for mass production of various types of parts. The process of precision sheet metal pressing can be fully automated when the WEINGARTEN press is retrofitted with a sheet metal feeder. Technical specifications of the WEINGARTEN DE200-20 200 t press - press force: 200 t - maximum slider stroke: 200 mm - minimum slider stroke: 15 mm - maximum number of slider strokes: 60/min - minimum number of slider strokes: 20/min - slider adjustment: 110 mm

Condition: used, ready for use Year of manufacture: 1998 Control: Siemens 840 C Travel X/Y/Z: 2x600 or 1x1,800 / 425 / 400 mm Main spindle: SK40 / 7,500 rpm / 106 Nm / 14 kW / IKZ Rapid traverse: 40 m/min Tool changer: 36-speed Dimensions W/H/D: 5,100 / 3,000 / 2,900 mm Weight: 9,500 kg

Cylinder head for Wärtsilä Vasa R32 engine, ready to install

Airless sprayer, painting device, spray pack, paint sprayer, paint spray system -Manufacturer: Wagner, paint sprayer paint spray system -Type: W 100 -Use: for varnishes and glazes -Area performance: 5 m² / 12 min -Dimensions box: 300/140/H260 mm -Weight: 1.5 kg

UD 24 CNC YOC 1990 Condition: well-maintained Year of Make: 1990 Control: Bosch CC200 Max. turning diameter with jaw chuck: Ø110 mm Max. turning length: 180 mm Bar passage: Ø24 mm Main spindle: 5,000 rpm / 5kW Tool turret: 8-cavity VDI20 W/D/H: 1,830 x 1,435 x 1,625 mm Weight: 1,600 kg Bar feeder: Ø24 x 3,000 mm Bar feeder W/D/H: 4,800 x 900 x 1,300 mm Equipment: - Collet + jaw chuck -Tailstock - IRCO Bar Feeder - Parts catcher - Optics for tool measurement - 8 pieces of VDI mounts

Web width 850mm Print repeat range 250-520 Reel diameter on rewinder and unwinder 600mm Core diameter 76mm Maximum mechanical speed 200m/min Electric drying Alcohol/Solvent ink system BST super Handy Scan digital 4000 web preview Electric ink pumps 10 pcs. Doctor blade chambers 10 pcs. Drip sills 10 pcs. Printing sleeves 176 pcs. Gear wheels 184 pcs. Anilox rollers 35 pcs.