w 100a used for sale

Wartsila 6L20 Genset YOM: 2007 1200 Kw at 1000 RPM 50 Hz 15.000 Working hours & in good condition Available from our Stock in Turkey

Wartsila L32 Connecting rods 8 Pcs available from stock From our Istanbul stock Reports available Tested for cracks and ovality In good condition

Pneumatic cylinder, air cylinder, pneumatic stamp, compact cylinder -Manufacturer: Metal Work, compact cylinder type 240400080XP -Stroke: 80 mm -Piston: Ø 40 mm -Piston rod: Ø 12 mm -Number: 2x cylinder available -Price per piece -Dimensions: 133/56/H86 mm -Weight: 0.8 kg/pcs

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type W20 DR63M4/TF/IS -Speed: 28 rpm -Power: 0.18kW -Shaft: Ø 20 x 40 mm -Protection class: IP55 -Dimensions: 300/180/H120 mm -Weight: 7.6 kg

working length: 1750 mm Working width: 1000 mm Working height: verstellbar mm used Haberkorn return conveyor device after four-sided planer -------------------------------------------------- ----- Pos.1 Longitudinal-transverse longitudinal conveyor - Total length 1,750 mm - Depth outside 1,400 mm, inside 1,000 mm - height-adjustable support frames - continuously driven roller conveyor - Transfer to the cross conveyor by raising and lowering the roller conveyor - Cross conveyor with 5 traverses, continuously variable drive - Transfer as a lifting and lowering device to a driven roller conveyor, stepless - Including control cabinet Pos.2 driven roller conveyor for return to the operator - height-adjustable support frames - Length 1,400 mm - Roll width 150 mm (Technical information provided by the manufacturer is not guaranteed!) The data for this ad was created with ModulMWS - the softwa ...

Key data: 63 1/min, 25 mm, 200 mm

Manufacturer: WMW Type: BKR 25 x 4 AI Stock number: 1023 Number of Spindles: 4 Spindle spacing: 475 mm Table working surface: 450 mm x 1900 mm Drilling capacity in steel: 25 mm Morse taper of spindle: MK 4 Connected load: 10.2 kW Weight: 3000 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, compact cylinder -Manufacturer: Metal Work, compact cylinder tray sealing machine Inauen VC999/ TS 1200 N -Type: 121AA20160ZP -Stroke: 160mm -Piston: Ø 120 mm -Piston rod: Ø 32 mm / M27 x 2 -Dimensions: 445/135/H135 mm -Weight: 9.6kg

LISTING ID 22583 BRAND: REINTJES MODEL: WAF 742 RATIO: 3,55:1 POWER: 924.6 kW 1240 HP 1800 rpm SN 62345 FEATURES: Flex. Coupling 21 inch, Controls, Left in, Right out, Brackets

LISTING ID 22583 BRAND: REINTJES MODEL: WAF 742 RATIO: 3,55:1 POWER: 924.6 kW 1240 HP 1800 rpm SN 62345 FEATURES: Flex. Coupling 21 inch, Controls, Left in, Right out, Brackets

Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, FL Switch, 5-port Fast Ethernet Switch, Controller Ethernet -Manufacturer: Wago, controller Ethernet switch from injection molding machine Demag D 100-275 NC -Type: 750-842 -Dimensions: 70/50/H100 mm -Weight: 0.2 kg

Fieldbus, Profibus, PLC control, automation technology, controllers and regulators, end module, fieldbus controller, PLC terminal -Manufacturer: Wago, end module from Demag D 100-275 NC injection molding machine -Type: 750-600 -Dimensions: 70/15/H100 mm -Weight: 0.1 kg

LISTING ID 22518 Brand: YANMAR Model: 6HYM-WET Condition: Brand New Specification - Model : 6HYM-WET - Number of cylinders: 6 in-line - Bore × stroke (mm) : 132.9 × 165 - Displacement (lit): 13.733 - Rated output (kW(hp)/rpm):M : 441(600)/2100 - Combustion system: Direct injection - Aspiration: Turbocharger + intercooler - Starting system: Electric starting motor (24V 6.0kW) - Cooling system: Heat exchanger - Size of flywheel housing and flywheel: SAE #1 and 14 in.

Fieldbus, Profibus, PLC control, automation technology, controls and regulators, end module, fieldbus controller, PLC terminal, digital input terminal -Manufacturer: Wago, digital input terminal from Demag D 100-275 NC injection molding machine -Type: 750-400 -Dimensions: 70/15/H100 mm -Weight: 0.1 kg

Control machine, monitor, control tool master -Manufacturer: Wieder, Monitor Tool Master TM -Type: WPC-ES-486, (133-1.2-L-9.4-T) -Dimension: 300/160/H215 mm -Weight: 6.7 kg

Brand: YANMAR Model: 6AYM-WET Power: 555 kW 1840 rpm Condition: Brand New Country of Origin: Japan Serial Number: 9501 HS CODE 84081079 Weight (kg) :2365 (without marine gear) Dimensions (cm) 200×130×143

Motor control, controller, converter, stepper drive, stepper motor control, frequency converter -Manufacturer: Berger Lahr, stepper motor control -Type: WD5-008.151-00 -Quantity: 2x controllers available -Price per piece -Dimensions: 310/60/H180 mm -Weight: 2.5 kg/pc.

Motor control, controller, converter, stepper drive, stepper motor control, frequency converter -Manufacturer: Berger Lahr, stepper motor control -Type: WPM 311.004-00 -Dimensions: 310/60/H180 mm -Weight: 1.9 kg

Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure Horizontal area 800mm Rising range 2,000mm Angle in the bend 45° Feed height: 300mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edges, blue FDA- Food compliant, food certificate is included Drive: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional Freely steerable transport rollers incl. parking brake Scalloped edge: 50x35mm T-40 cleats - approx. 300mm pitch 2-layer particularly transversely stable Usable width: 290mm, results as follows: Cross arrangement 70+35+290+35+70mm All our prices are net prices plus VAT. - can also be viewed under power after consultation!

Key data: 2500 mm, 32 mm

Manufacturer / make: WMW Schwermaschinenbau Wildau Type/ type: UBR 32 x 2500-7/16 Lagernummer / stock number: 1019 Baujahr / new in: 1969 max. sheet width: 2500 mm Bale length / convexity length of rollers: 2700 mm Max. sheet thickness ( St 50): 32 mm Max. sheet thickness ( St 34): 39 mm min. sheet thickness ( St 50): 8 mm Number of straightening rollers:7 rollen / rollers Number driven straightening rollers: 5 rollers Straightening roller diameter of straightening rollers: 290 mm Output straightening rollers / diameter of input / output straightening rollers: 345 mm Number of support rollers: 13 Stützrollendurchmesser / diameter of support rollers: 288 mm Oberbolenhub/ stroke of upper beam: 120 mm Straightening speed / speed of straightening: 16 m / min Hauptantrieb / rated power of main drive: 90 kW Total load: 138 kW Gewicht de ...

Weibert F40 - Table milling machine Milling spindle 30mm 90° Speeds: 1400/ 3500/ 6000/ 8000 rpm Casting table length 1000 mm width 500 mm Motor 2.2kW 400V Integral Safety Rails 500mm Pressure Device MORI Table extension right and left Right-counterclockwise rotation of the milling spindle

used deck stove quail Columbus C516/96 M ECO, 5 levels, with br. Elco gas burner, analogue control, 81 kW, 400 V, 50 Hz, checked through

Used rack oven WINKLER, type: Comet 1.10 for trays 58 x 98 cm -In bakery condition- Technically everything checked. Viewing possible by arrangement.

Guideway Grinding Machine Waldrich Coburg -30-10 S 3640 Control: Siemens 840D Year of Make: 2012 Travel: X-axis 8,825 mm Y-axis 3,010 mm Z-axis 2,500 mm Table length 8,000 mm Table width 1,800 mm Table load: 18,000 kg Feed X-axis: 1 - 45,000 mm/min Feed Z-axis: 100 - 3,000 mm/min Universal Grinding Head S10 with 110 Degree Tilt / 2500 Rpm / 7.5 kW Vertical Grinding Head S30 with Ø 600 x 150 / 930 Rpm / 22 kW Double SIEMENS 840D controller on the left and right of the machine Automatic doors (4x) for easy access to the machine / load / clamping Hydraulic table drive with 18000 kg working load KNOLL HL650/4000 filtration system new 2023 Various grinding wheels Large Package Spare Parts/Ball Screws/Covers Renovation in 2012 for 1.5 million EUR

Key data: 75 1/min

This WEBER extruder is in machine storage at Plastima Used Machinery. The machine comes from 1997 and is in great condition. Brand: Hans Weber GmbH Model: NE 7 042 Type screw: single screw Year of construction: 1997 Screw Ø: 75mm Working hours: 58.668

turning diameter: mm turning length: mm swing diameter over bed slide: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinder Manufacturer: Kramer Grebe Model: WW200 For processing chilled meat and frozen meat blocks Made of stainless steel Hopper volume: 400 liters Diameter: 200 mm Voltage: 400V, 50Hz Two speed motor Electric power: 31/40 kW Productivity up to 12000 kg/h Weight: 1300 kg

Fan, fan, electric motor, blower, axial fan -Manufacturer: ebm, axial fan type W2G144-AA21-01 -Voltage: 24 V 15W 3000RPM -Quantity: 1x fan available -Dimensions: 180/170/H50 mm -Weight: 0.8 kg

Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wikus, bi-metal saw band M42 unused -Type: Biflex Kobali M42 3660 x 25 x 1.5 mm -Quantity: 5x sheets available -Price per piece -Transport dimensions: Ø 410 / 50 mm -Weight: 0.7kg/piece

Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wikus, 10 pieces of bi-metal saw band M42 unused -Type: Biflex Kobali M42 3700 x 25 x 1 mm -Quantity: 10x sheets available -Price: complete -Transport dimensions: 800/700/H30 mm -Weight: 8.2 kg

sheet width: 4050 mm plate thickness: 20 mm distance between columns: 4100 mm column daylight: 4200 mm no. of strokes: 10-20 Hub/min working pressure: 250 bar total power requirement: 85 kW weight of the machine ca.: 43,6 t dimensions of the machine ca.: 5,5x2,8x2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Condition: New (traces of storage available) Part Number: 8256016 Serial Number: 19293766 Type: 1724 Suitable for: Mitsubishi S12R

Walter Helitronic CNC Tool Grinding Machine - Grinding machine Hersteller [manufacturer]: Walter Type [ type]: Helitronic Control unit: Heidenhain TNC 360C Incl. handwheel Baujahr[construction year]: 10/2002 Travel path: X= 1500mm Y=500mm Z=450mm Workbench: L = 1800mm W=500mm Spindle [spindle]: swivel +-90° Feed speed [feed speed]: 10-4000mm/min Spindle rotation speed: 30-3000 rpm Feed force [feed force]: 10,000-15000N Tool holder: SK 50 after DIN2080 Weight: 7.000kg Approx. (W x D x H): 3.0m x 2.25m x 2.85m Incl. various accessories according to photos Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Tel. +4917621834834 Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - u ...

thickness of jaw: 150 / 160 / 200 mm max. clamping width: 105 / 138 / 275 mm ca. high of jaw: 46 / 63 mm Condition: unused: New machine vices on rotating plate 360 °, provided with 180 ° degree scale from remaining stock at a special price. The body is made of high quality gray cast iron (FC-25), jaws made of rolled steel, hardened, replaceable. Mod.M 150: span: 105 mm, jaw height: 46 mm, dimensions: 600x200x160 mm, Weight: 26 kg, photos 1-3, price 270, - + VAT. Mod. M 160: with covered spindle, three-way adjustable via socket pin, Span: 275 mm, jaw height: 63 mm, dimensions: 800x270x200 mm, weight: 43 kg, photos 4-6, price 700, - + VAT. Mod.M 200: span: 138 mm, jaw height: 63 mm, dimensions: 700x260x200 mm Weight: 54 kg, photos 7-9, price 495, - + VAT. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Absolute encoder, encoder, rotary encoder, encoder, incremental encoder -Manufacturer: Balluff, Incremental Encoder -Type: BDG 6360-2-10-30-W126-2500-65 -Quantity: 2 encoders available -Price: per piece -Dimensions: 58/86/H70 mm -Weight: 0.3kg

Collet set 15 pieces with drill chuck Vertical Drilling and Milling Head - T-Slot Width 12 mm Cutter head Coolant Setup x - travel 500 mm y - travel 200 mm z - travel 400 mm Feed: 5.6 - 238 mm/min with quill stroke Speed: 35.5 - 1800 rpm with rapid traverse Clamping area: 800 x 300 mm Total power requirement 16 A Spindle holder ISA 40 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Wartsila 1 x 12v32LN DG 4.2 MW , 750 RPM, 11kv volt, 50hz. Diesel Generator , Gen set, DG Set Power plant with accessories for sale.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure silo 29 m³ volume, payload 46 to, dead weight 3000 kg Diameter 2500 mm, height 8600 mm Spout height 1250 mm / 900 Ball valve DN 65 Inspection Cover NW 500 Blow-in line, vent line

HDPE Film Washer Year of construction 2016 0 operating hours (never went into operation) Manufacturer: NEUE HERBOLD, D-74889 Sinsheim composed of: Wet granulator type SM 450/600-S5-2 Friction washer / friction separator type FW 560/3000 Transport screw Separation tank (float-sink separation) type TB 500 mechanical dryer type TM 1005 Extraction system type MFT 55/500 Fine Material Separator Type HS 500 E-circuit

Reamers, solid drills, indexable insert drills, indexable insert drills with internal cooling, indexable insert solid drills -Widax: Indexable insert drill with internal cooling -Type: 21676017 Ø 66 mm -Hole: Ø 60 mm -Dimensions: Ø 123 x 310 mm -Weight: 7.4 kg

Pressure silo 34 m³ volume, payload 48 to, dead weight 3000 kg Diameter 2500 mm, height approx. 9000 mm Cone with air loosening Spout with ball valve DN 80 Inspection Cover NW 500 Silo Back Protection Ladder Blow-in line, vent line Pressure test book not available

TIG hose package, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 7 m -Plug: 5 pin -Weight: 4.2 kg

TIG hose package, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 8m -Tuchel plug: 5 pin -Weight: 2.8 kg

TIG hose package, welding torch, hand welding torch, TIG torch -TIG hose package: torch type 20H, water-cooled -Length: 8m -Tuchel plug: 5 pin -Weight: 2.8 kg

Availability: immediately Condition: in working order, new mesh belt Dismantling: by buyer Overall length: approx. 26,500 mm Length of baking chamber: approx. 24,000 mm Overall width: approx. 2,650 mm Net belt width: approx. 1,700 mm Usable width/working width: approx. 1,500 mm Inlet length: 1,000 mm Spout length: 1,300 mm Sheet metal: painted white

Pressure test book not available - sold as a free-fall silo Silo 34 m³ volume, payload 50 to, dead weight approx. 4000 kg Diameter 2500 mm, height approx. 9000 mm Outlet with silo butterfly valve NW 250 Inspection Cover NW 500 Blow-in line, vent line

Inductive sensor, electronic sensor, proximity switch, proximity sensor, proximity sensor -Manufacturer: Bürkert, Proximity Switch proximity switch unused -Type: 3-Wire PNP-NO -Voltage: 10 - 30V DC -Dimension: 103/70/H90 mm -Weight: 0.3 kg