w 100a used for sale

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 25 to 75 mm -Load capacity: 2500 kg -Number: 1x terminals available -Price: per piece -Weight: 21 kg

Three-phase motor, electric motor -Power: 0.09 kW -Speed: 1330 rpm -Shaft: Ø 9 mm -Design: B3 -Protection class: IP 44 -Dimensions: 190/147/H110 mm -Weight: 4 kg

working length X: 2.500 mm working length Y: 1.300 mm : 4 - 80 mm Number of milling agregates: 2 St. Number of boring motors: 2 St. : 72 : 16 : 4 : 90° schwenkbar : 130 m/min : 80 m/min : 50 m/min : 27 m/min turning speeds: max. 18.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric motor, three-phase motor -Power: 0.76 kW -Speed: 3000 rpm -Shaft diameter: 14 mm -Construction: B5 -Protection class: - -Dimensions: 285/195/H215 mm -Weight: 10 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 20 mm -Load capacity: 1000 kg -Number: 1x terminal available -Price: per piece -Weight: 6 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 40 mm -Load capacity: 2500 kg -Weight: 12 kg

SEITAL SE30 MILK & WHEY SEPARATOR APPLICATION: CREAM SEPARATION CAPACITY: 7.000 LT/H FOR MILK SKIMMING 10.000 LT/H FOR WHEY SKIMMING MACHINE COMES WITH TOOLS AND INSTRUCTIONS BOOK

Gear motor, electric motor, three-phase motor -Speed: 84 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 33/E -Dimensions: 350/170/H180 mm -Weight: 16.2 kg

Gear motor, electric motor, electric gear motor -Speed: 20 rpm -Power: 0.18 kW -Construction: B3 angle -Diameter shaft: 16 mm -Protection class: IP 33 -Dimensions: 235/185/H120 mm -Weight: 4.9 kg

Pressing force 1000 kN Table size 750 x 560 mm, diarrhoea opening 100 mm Installation height 800 mm, stroke 500 mm Projection 360 mm Bear size 530x400 mm, 2 T-slots Ram speed: down 200 mm/sec, up 400 mm/sec Connection load approx. 21 kW Incl. Feeder WE16 for 160 mm bandwidth Coil tray and straightening unit Fabr. OFFICE; Type CA200/R40-7, YOC 1994 Reel, loop control Two-hand operation Manuals

Tool holder, milling holder, milling tool -Number: 2x SK45 holders -Inside mount: Ø 36 x 90 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 5.4 kg

Tool holder, milling holder, milling tool -Number: 2x SK45 holders -1x recording inside: Ø 28 mm -1x recording outside: Ø 40 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 4.5 kg

Cloud m600 advanced inkjet printer, 3 print heads and cables, - Cloud-m600 advanced inkjet printer, 230V AC, - I/O connection cable control voltage 5V+24V DC, - Three print heads red, one without scraper plate, - Three print head cables 3m, - Connection cable for rotary encoders,

WARCOM plasma - Cutting measures 2500x6000 - Equipped with protections - Suction system

Gear motor, electric motor -Speed: 13 rpm -Power: 0.11 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 33 -Number: 1x geared motors available -Price: per piece -Dimensions: 380/170/H180 mm -Weight: 17.5 kg

Gear motor, electric motor, three-phase motor -Speed: 153 rpm -Power: 0.18 kW -Voltage: 220 V -Construction: B3 angle -Shaft diameter: Ø 12 mm -Protection class: IP 44 -Number: 1x engine available -Price: per piece -Dimensions: 290/125/H180 mm -Weight: 5.7 kg

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Number: 2x spindle tools -Adjustment: SK50 -1x shaft size: Ø 50 x 250 mm -1x shaft size: Ø 63 x 200 mm -Price: complete -Weight: 13.2 kg

Tool holder, milling holder, milling tool -Adjustment: SK50 -Test pin: 80 x 160 mm -Number: 1x recordings available -suitable for: tool changer -Price: per piece -Weight: 9 kg/piece

High pressure pump / Airless paint sprayer With high flow rate, ideal as a feed pump for airless sprayers (united for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Gear ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Flow rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm

Gear motor, electric motor -Speed: 61 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Price: per piece -Number: 8x available -Dimensions: 405/140/H180 mm -Weight: 14 kg

WIWA High Pressure Pump 235.42R / 38042, YOC 2000 With high flow rate, ideal as a feed pump for airless sprayers (united for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Gear ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Flow rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm

Gear motor, electric motor -Speed: 62 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Dimensions: 430/160/H200 mm -Weight: 16.7 kg

weight max.: 5 t workpiece diameter: 150 - 1800 mm Turning speed: 70 - 1200 mm/min roll diameter: 250 mm total power requirement: 1 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,8 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with rubberised rolls, manual adjustable roller-spacing, • one device with twin drive with adjustable rotational speed. • with CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: WMW -Type: size 25 -Weight: 3 kg

Tool holder, milling holder, milling tool -Adjustment: SK50 -Test pin: 50 x 125 mm -Number: 1x recordings available -Price: per piece -Weight: 4.6 kg/piece

weight max.: 3 t workpiece diameter: 120 - 1500 mm Turning speed: 0,6 - 1000 mm/min roll diameter: 250 mm total power requirement: 0,5 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,4 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with rubberised rolls, manual adjustable roller-spacing, • one device with twin drive with adjustable rotational speed. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, milling tool -Adjustment: SK50 -Test pin with tip: 40 x 143 mm -Number: 1x recordings available -Price: per piece -Weight: 3.7 kg/piece

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Number: 5x spindle tools -Adjustment: SK50 -different shaft sizes: 22/25/30/40 mm -Price: complete -Weight: 19.2 kg

Gear motor, electric motor -Speed: 1.5 rpm -Power: 0.05 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 33 -Dimensions: 305/160/H130 mm -Weight: 5.2 kg

chamber volume: 170 liter useable volume: -- liter friction: -- motor drive power: 800 kW Condition: used - Specification: internal mixer used as additional option: Rubicon batch-off plant - capacity approx.: 170 litres - rotor model: tangential design - drive controller: Allen Breadley - Control: Mitsubishi - Motor speed: 1,000 rpm - Gearbox: Panamax 9000 make Sumitomo - Rotor speed: 5.6 - 55.6 rpm - Chamber hardness: 45 -50 HRC - Motor: 800 kW - 1000 rpm - 380 V, 50 Hz - Moror make: Teco - Output: 27 tons/day - Cycle time approx.: 4 - 8 min - Height approx.: 7,500 mm - Weight approx.: 35,000 kg, incl. gearbox and motor Available as an option: - Batch-off system Make: Rubikon / Mattech - Cooling bars max.: 300 mm / 2x 80 mm The data for this ad was created with ModulMWS - the software solution  ...

Device characteristics: Number of bars: 48 per minute. Hopper capacity: 7 litres. Weight: from 10 to 80 g ( depending on the stamp ). Dimensions ( L x W x H ): 500 x 400 x 650 mm. Total weight: 27 kg.

Gear motor, electric motor, electric gear motor -Speed: 304 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 44 -Dimensions: 380/200/H190 mm -Weight: 15.7 kg

First installation year 2010 - Bar capacity 52 mm - The machine has always worked with oil - Equipped with Lns Sprint S2 barfeed, front magazine type, and a lot of accessories (for both lathe / barfeed) - Fanuc 31i-A Control.

Tool trolley for bending tool, die, upper knife, upper tool, straight tool -Tool trolley for the: Tool for a press brake -with several compartments -Dimensions: 1165/720/H1000 mm -Weight: 208 kg

Thread cutting chuck, thread chuck, tap chuck -Handover in its current condition as inspected -Thread cutting chuck without collets -with slip clutch -Cutting capacity: M24-M64 -Recording: MK5 -Quantity: 1x threading chuck available -Weight: 13 kg

-3 pieces available in stock -for 10 sheets 60x40cm -with Wiesheu Comfort control -Power 19 kW -400 V 3/N/PE -Rated current 27.5 A -Supports distances 8cm -Year of construction: 2014 Dimensions: Width: 93cm Depth without hood: 100cm Depth with hood: 115cm Height: 217cm

Since we have focused our -fischer organics- laboratory service more on peptides / HRMS, we would like to hand over our SFC. The system has the complete equipment, The original price in 2012 was over 250,000 euros net! - Mass detector QDa - Backing pump RE6 - Acquity PDA detector - Acquity Pillar Manager - Acquity Binary Pump 1000bar - Acquity Autosampler - Isocratic UPLC pump - Convergence Manager

Shell end mills, shell mills, milling cutters -Number: 8 pieces finishing cutter/roughing cutter -Socket: Ø 40 mm -Various diameters: 120-125 mm -Different producers -Price: complete -Weight: 22 kg

Shell end mills, shell mills, milling cutters -Number: 18 pieces finishing cutter/roughing cutter -Socket: Ø 40 mm -Various diameters: 100-125 mm -Different producers -Price: complete -Weight: 57.6 kg

Shell end mills, shell mills, milling cutters -Number: 9 pieces finishing cutter/roughing cutter -Socket: Ø 32 mm -Various diameters: 76-100 mm -Different producers -Price: complete -Weight: 13.3 kg

Electromagnet with large depth action for extracting ferrous parts from a material stream, oil-cooled design. Including control cabinet with 22 V DC power supply (type: 312-220/20, for connection to 400 V / 50-60 Hz) and overhead duo-rail installation (ca. 4.5 m long x 2.5 m high) for moving the magnet. By switching off the magnet above the drop point attracted ferrous parts are removed.

Shell end mills, shell mills, milling cutters -Number: 12 pieces finishing cutter/roughing cutter -Socket: Ø 32 mm -Various diameters: 75-110 mm -Different producers -Price: complete -Weight: 21.3 kg

Shell end mills, shell mills, milling cutters -Number: 28 pieces finishing cutter/roughing cutter -Socket: Ø 22 mm -Various diameters: 49-80 mm -Different producers -Price: complete -Weight: 10.5 kg

Geared motor, electric motor, three-phase motor -Speed: 64 rpm -Power: 2.2 kW -Design: B3 -Shaft diameter: Ø 60 mm -Protection class: IP 33 -Dimensions: 680/295/H420 mm -Weight: 103 kg

amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max diam 250 , max lenght 2000, 3 x heads , change gears

Wartsila L32 cylinder heads Brand new condition With BV class certificate 8 Pcs available In our stock in Istanbul Turkey

High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Grinding spindle: for lathe -Electrically operated -Max. Speed: 6900 rpm -Admission: M42 x 1.5 mm -Dimensions: 600/390/H355 mm -Weight: 64 kg

Minimum quantity lubrication, coolant lubrication device, cooling spray device, oil spray device -pneumatic: driven -Tripping: electrical -Oilcontainer -Dimensions: 200/230/H375 mm -Weight: 2 kg

Tank-& Umweltschutz Wozniack Fachbetrieb nach Wasserhaushaltsgesetz Delivery time immediately Dear Sir or Madam, we offer a 10,000 liter double-walled storage tank for the storage of diesel. Heating oil or other hazardous substances as follows. Nominal capacity 10 cbm according to EN 12285-2 standard Piece 1. Material steel in steel, material S235JRG2 Documents Manufacturer's certificate/test certificate according to EN 12285-2 standard and type plate Piece. 1 dipstick Piece. 1 vent nozzle Piece. 1 filler neck Piece. 1 new limit value transmitter Piece. 1 new leak detector with filled leakage liquid Piece. 1 ladder Piece. 1 removal sleeve Form. cylindrical storage tank with feet/bracket Container dimensions length approx. 5,300 mm Diameter approx. 1,600 mm Weight approx. 1.800 kg Storage above ground Top on offer . Liquid ferti ...