w 100a used for sale

Table saw, aluminum profile saw -2x saw: Wegoma TS 250 -Fixed cutting distance: approx. 450 mm -Saws: individually or simultaneously controllable -with: foot switch -Saw blade: Ø 250 mm -Voltage: 220/380 V -Saw motor: 0.75 kW -Dimensions: 850/790/H1660 mm -Weight: 234 kg

Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Copy router: Wegoma SK6 -Copy router: swiveling -with support rail length: 1910 mm -Motor: 220 V 1.4 kW -Spindle speed: 22000 rpm -Dimensions: 500/460/H1530 mm -Weight: 46.5 kg

CNC lathe WIA L 200 SY Manufacturer: Hyundai YEAR: 2014 Control Fanuc ... Fanuc 31i Turning diameter ... 550mm Rotation length... 530mm Axis Y ... +-40mm Counter spindle Spindle bore... 70mm Tool turret... 12 L x W x H ... 3045 x 1707 x 2021mm Machine weight ... 4600kg The machine is in good condition, possible to test under power.

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder -different recordings: 10 -from: WNT-Mastertool -Sale: only complete -Price: complete -Weight: 36 kg

Cooling cell with quail cooling motor Year of construction 2011 Coolant: R134a 2207 Height: 250cm Width: 90cm depth: 225cm

Altendorf WA6 Format circular saw new Format sliding table: 2600mm Engine power: 400V 4 KW (5.5 hp) Saw blade: 315mm swivel: 90°-45° Pre-scoring unit: with engine 0.37 KW (0.5 HP) For wood, plastic and non-ferrous metal G&AL-WA6-2600 ASSEMBLED CHECKED AND MEASURED! SPECIAL PRICE Format sliding table:also in 1600mm SPECIAL PRICE Accessories: Saw blade pendulum protection (upper protection) for saw blade 350mm

Quail shared shop oven Type: Piccolo II-6 Floor 120x80cm DMS 3 Master Control Year of construction 2005 Electric oven 50.4kW with hood Height: 235cm Width: 155cm Depth: 130cm

Expanded In rotating condition due to new motorization wirt sold and pictured

WALDRICH SEIGEN WST IV H80 X 12000 ROLL GRINDER YEAR: 1981 / INSTALLED 1982 MAXIMUM GRINDING DIAMETER: 78” ( 1981.2 mm) WITH 32” (812.8 mm) DIAMETER WHEEL MAX DIAMETER CAPABILITY: 2500mm DISTANCE BETWEEN CENTERS: 472.40” (12000mm) MAXIMUM WORKPIECE WEIGHT: 176000 lbs. (80t) WHEEL OD MAXIMUM: 32.00” WHEEL WIDTH MAXIMUM: 4.00” WHEEL ID: 12.00” WHEEL SPINDLE POWER: 27 - 59/59 HP WHEEL DRESSER: BED MOUNTED ROLL WHEELHEAD TRAVEL: 25.60” TABLE TRAVEL: (WHEEL HEAD TRAVEL) 488.40”( 12405 mm) TABLE SPEED: (WHEELHEAD SPEED) 157.5 in/min (4000 mm/min) WHEEL SPINDLE SPEED: 450 - 1800 RPM Infinitely Variable WORKHEAD POWER: 1.9 - 59/59 HP WORKHEAD SPEED: .5 - 300 RPM WAYS: CAST IRON FULL HYDROSTATIC SLUDGE CONVEYOR: NONE COOLANT: YES FILTRATION SYSTEM: COMBINATION 2 CARTRIDGE AND FABRIC FILTER WAY COVERS: METAL TELESCOPIC POWER 3PHASE / 50-60 Hz / 200 - 50 ...

Control cabinet and distribution board, busbars, busbar supports, busbar adapters, terminal plates -Wöhner item no.: 01 243 -Quantity: 2 pieces available -Price: per piece -Minimum purchase: complete -Dimensions: 200/80/H110 mm -Weight: 0.5 kg/piece

Control cabinet and distribution board, busbars, busbar supports, busbar adapters -Wöhner Art.No.: 32427 -Rated current: 690 V/32 A -Quantity: 44 pieces available -Price: per piece -Minimum order quantity: 5 pcs -Dimensions: 200/45/H60 mm -Weight: 0.3 kg/piece

SCM st 1g Format circular saw milling machine Format sliding table in 1.2m Cutting height: 67mm 90° 40mm 45° Auslegertich kpl. Cutting width 700mm Saw blade: swivel 45°, max.250mm 1.8KW 2 motors 400V 50HZ Milling machine: rigid 90° Milling machine rpm: Speeds: 5000/7500 rpm. Milling stop max tool diameter max. 160mm Suction pipe 60 - 120mm Weight 190kg Eccentric tensioner G&STÜ-5501048

Control cabinet and distributor construction, busbars, busbar supports, busbar adapters, terminal plates -Wöhner item no.: 01 240 -Number: 9 pieces available -Price: per piece -Dimensions: 200/55/H110 mm -Weight: 0.4 kg/piece

Power converter, power supply, power supply unit, switching power supply unit, power supply unit module -Input: 100-240 V AC 50/60 Hz 6.5 A -Output: 24 V DC/20 A -Price: per piece -Number: 11 pieces -Dimensions: 295/125/H50 mm -Weight: 1.7 kg/piece

Control amplifier, servo motor control -Manufacturer: Indramat -Type: TRM3-W23-E0/523 -Module: TSS8/532 -Number: 1x controls available -Price: per piece -Dimensions: 305/145/H310 mm -Weight: 7.1 kg/piece

WIMAG coil scissor gripper type SG 3 - 1.1, load capacity 3000 kg, coil outer diameter 1,100mm, coil height 800 mm, weight 582 kg

grinding length: max. 630 mm grinding width: max. 200 mm workpiece height: . mm x-axis: max. 250 mm y-axis: max. 710 mm distance spindle center to table: max. 500 mm table surface area: 0,25 mm table load: max. 1,1 t table speed -stepless-: 2 - 18 m/min cross feed autom.: . dust exhaust: 0,25 kW coolant pump: 0,09 kW total power requirement: ca. 4,5 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 2400 x 1600 x 1900 mm Adjustments Y axis: 1 scale value = 0.005 mm Z axis: 1 scale value = 0.002 mm Manual adjustment (within the range of 250 mm of the Y axis): 80 mm Speeds: automatic cross feed Adjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke, - continuous: 0 - 4 m/min Grinding wheel Ø max. 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Digitaldisplay for 2 advertisement vertical infeed The data for this ad was cr ...

0: 10000 kg height of stroke: 130 mm Total height: 290 mm weight: 21 kg dimensions: 190 x 260 x 290 mm Hydraulic machine jack Foot height 22mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inverter, data processing device, data logger -Manufacturer: Wilmers, wilog Data Logger -Housing: 0903-35-OP303 -Mounting parts: see photos -Dimensions: 500/300/215 mm -Weight: 11.6 kg

Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Unit comes from: grinding machine WERKO SKSt 200 -Motor: VEM type KMR 56 G 4 -Pump: 220/380 V/1360 rpm/0.18 kW -Dimensions: 470/570/H445 mm -Weight: 88 kg

Reciprocating saw, dovetail saw, tiger saw, saber saw -Flex reciprocating saw: SK -Nominal power input: 1200 W -in :suitcase -Dimensions: 610/120/H250 mm -Weight: 5.8 kg

Wheel diameter: 200 mm Cutting height: 80 mm cutting width: 180 mm Motor output: 350 W Table dimensions: mm Table tiltable: 45 Grad saw band length: 1400 x 6,5 x 0,35 mm machine weight ab.: 12 kg Dimensions (L/W/H): 700 x 600 x 700 mm Wood band saw with extendable and swiveling saw table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2500 kg fork length: 1150 mm stroke height: min 85, max 200 mm : 155 mm length in width: 540 mm number of wheels: 4 vorne, 2hinten tire equipment: PU/Pu fork arm (length x width x thickness): 1150 x 155 x 50 mm weight of the machine ca.: 0,068 t dimensions: 1,5 x 0,54 x 1,21 m SPECIAL PRICE ! - metered lowering of heavy loads - low maintenance hydraulic unit in steel version - Rounded fork tips for more safety when entering the pallet - Hard chromed piston rod and overload valve - Steering and load rollers ball bearings, for easy running even under load The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5000 kg height of stroke: 120 mm Total height: 243 mm weight: 15 kg dimensions: 170 x 230 x 250 m Hydraulic machine jack Foot height 19mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 170 mm dimensions of saw-band: 2080 x 20 x 0,9 mm table height: 880 mm cutting speed: 40 + 80 m/min : 170 mm : 125 mm : 150 x 190 mm : 95 x 120 mm total power requirement: 1,1 kW weight of the machine ca.: 0,24 t Dimensions (LxWxH): 870 x 1.550 x 1.740 mm mm Miter band saw Demonstration system at a special price ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 900 mm table width: 600 mm table height: 700 mm groove width: mm : mm weight of the machine ca.: 90 Kg dimensions: 0,9 x 0,6 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Weight: 18 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 135 mm -Piston rod: Ø 60 mm - Stroke: 1020mm -Max. Pressure: 175 bars -Number: 2x available -Price per piece -Dimensions: 1660/235/H200 mm -Weight: 130kg

Sensor-actuator distributor, distributor strip -Connection: 15 - 30 V DC -Distributor: 6-way -Weight: 90 g

Wheel diameter: 400 mm Cutting height: 200 mm cutting width: 350 mm Motor output: 1,5 kW Table dimensions: 400 x 500 mm Table tiltable: 45 Grad saw band length: 2950 mm machine weight ab.: 150 kg Dimensions (L/W/H): 700 x 600 x 1800 mm wood band saw Thanks to the heavy cast-iron table, the wood band saw offers good stability. The machine has a longitudinal guide and a miter guide and is supplied with a saw band. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hello all, We have in our stock in Istanbul Turkey 3 Wartsila W32 Cylinder head covers in almost brand new condition (slightly used) Standart exhaust seat bores, No cracks or wielding Water pressure tested With reports available Please contact us at info@fin-marine.com Regards

sheet width: 300 mm plate thickness: 2,5 mm distance between columns: 300 mm diameter of upper rolls: 32 mm total power requirement: Handbetrieben weight of the machine ca.: 15 Kg dimensions of the machine ca.: 500 x 300 x 150 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Adjustable crossbeam, crane crossbeam, crossbeam for pillar jib crane, indoor crane, workplace crane, chain hoist -Traverse for: the transport of different loads -Load capacity: 8000 kg -Dimensions: 4070/230/H770 mm -Own weight: 715 kg

Punch, hydraulic punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system -2 punching -Punch movable: 215 - 2505 mm -for: small punching work -Foot switch -Dimensions: 3010/930/H1450 mm -Weight: 570 kg

Used dough portioner W&P KEMPER, Type: Relaxer S - Dough strand length: up to 850 mm - Dough string size: H 110 x W 165 x L 850 mm - Power: 4 strands per minute (240 pcs/h) - TA 50 - 80% (50-80ml water on 1kg flour) - Hopper capacity: approx. 160 kg dough - Funnel size: L 720 x W 600 mm - Dimensions: 1.830 x 750 x H 1.500mm - refurbished, excellent condition - Warranty: 6 months The machine has been completely overhauled and is in excellent condition. Viewing and test run are possible by arrangement.

Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg

Tool holder, milling holder, milling tool -Number: 7x SK40 mounts with tool carrier -Executions: different -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills -Sale: only complete -Dimensions: 590/120/H210 mm -Weight: 12 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 300 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Dimensions: 425/45/H45 mm -Weight: 1.7 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 50 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Dimension: Ø 27 x 192 mm -Weight: 0.25 kg

Central lubrication, oil circulation system, progressive pump, central lubrication unit -Lube central lubrication unit: MMX-W -Motor: 100 V/0.01 kW -Dimensions: 280/190/H230 mm -Weight: 9.3 kg

VSA 38 L Feeder Feeder VSA 38 L 3 feed rollers Roll diameter 120mm Roll width 60mm 8 speeds (2/4/5.5/6.7/11/12/15/30 m/min) Motor 750W 400V 50Hz 2-stage gearbox Weight 85kg G&STÜ-5114500

VSA 38 TB Feeder 3 feed rollers Roll diameter 120mm Roll width 60mm 8 speeds (2/4/5.5/6.7/11/12/15/30 m/min) Motor 750W 400V 50Hz projection 1050mm Suspension travel of the castors 25mm 2-stage gearbox Weight 65kg G&STÜ-5114501

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 150 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 6 pieces -Dimension: Ø 36 x 300 mm -Weight: 0.95 kg/piece

Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Oscillator Model: ED-WS -Year of construction: 2017 -Voltage: 220 V -Dimensions: 210/210/H130 mm -Weight: 2.6 kg

Chassis, electric motor, DC motor, traction motor, drive motor -Chassis for: pedestrian stacker make Still type EGU2000 -with: slewing ring and drive (steering) -Wheel: 240 x 80 mm -Dimensions: 290/290/H620 mm -Weight: 64 kg

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck -Mouth size: Ø 250 mm -Recess: Ø 230 mm -Bolt circle: Ø 200 mm -Quantity: 2 available -Price: per piece -Weight: 35 kg

Generator, generator, emergency generator -Power: 1.5 kVA 200 Hz -for: vibrating bottle -Sachs two-stroke engine: 4000 rpm 2.57 kW -Dimensions: 570/385/H530 mm -Weight: 51 kg

Copper pipe -Sanco copper pipe: EN 1057 -18x: 1 -Roll: 25 m -Number: 2 rolls available -Price: per roll -Dimensions: Ø 760/60 mm -Weight: 10.7 kg

Fan, fan, electric motor, blower, centrifugal roof fan, emergency ventilation fan, flue gas fan -Speed 1420/1260 rpm -Line 0.13/0.09 kW -Dimensions 670/670/H445 mm -Weight 24 kg

Werner Pfleiderer Double Conus Kneader used unfortunately no type plate available, we assume DK65, for which we do not guarantee Machine in condition as returned by the customer, was overhauled according to the previous owner smooth and smooth running, machine automatically switches to the second stage Timer adjustable for 3-30 minutes, head then lifts independently Machine also runs with the head open or can be lifted during operation, this should be corrected before use by means of limit switches The machine must be thoroughly cleaned before use Video about test run and other pictures available