w 100a used for sale

Wire strapping WAHLER Plant description Automatic WAHLER wire strapping machine (WDU-750-BDFB), construction year 1995, for the strapping of paving stones and high concrete products (bricks, curbs, etc.). Strapping height minimum: 30 mm above OK board Strapping frame size 3 (1,500 x 1,250 mm => board size 1,400 x 1,100 mm) Components: - Base frame to accommodate the lifting frame frame in welded Profile steel construction - Clamping and closure unit for galvanized flat steel wire 1.60 x 0.60 mm - Double lifting device for 2 strapping at different heights (adjustable) - Strapping frame in welded angle steel version with pneumatically operated wire guide rails made of highly wear-resistant steel - Stone compactor, acting on all sides - Wire unwinding device - Pneumatic equipment with valves, compressed air cylinders, etc. - Control cabinet with PLC cont ...

Webo in-line drilling machine - 2 machines: speed 90 - 1000 1/min. - 4 machines: speed 4000 - 6000 1/min. - Coolant device - Tool holder: MK2 - Width: 200 cm - Height: 200 cm - Depth: 100 cm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Woodward / Wärtsilä LinkNet 6 CHANNEL 4-20 mH INPUT in original packaging ! See photos !

Dimensions (L/W/H): 3500x2300x1780 mm Weight: 4000 kg Total power requirement: 27,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1920x3520x6300 mm Weight: 2500 kg Total power requirement: bis max. 22 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1340x1050 mm Weight: 640 kg Total power requirement: 1,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1750x1100x1640 mm Weight: 1000 kg Total power requirement: 15 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 7000x2900x2100 mm Weight: 4500 kg Total power requirement: 35 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2860x1120x1140 mm Weight: 1260 kg Total power requirement: 19 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1170x560x570 mm Weight: 55 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AUTOCLAVE (USED FOR ALL TYPE OF YARNS) , FULLY AUTOMATIC VACUUM - STEAMER WITH AUTOMATIC TRANSPORT SYSTEM ‘P’ MAKE : WELKER ( GERMANY) Y.O.C. : 1987, Reconditioned 2002, later used for couple of more years, then preserved ! VOLUME : 9200 L MAX. TEMPERATURE : 150˚C WORKING LENGTH : 4000 MM DIA ( WITHOUT INSULATION) : 1600 MM DIA WITH INSULATION : 1720 MM

Shared oven Quail Piccolo I-2 - Electric shared oven with steam function - 2 floors each 60x80 with visible glass - with digital strain gauge control - each floor with upper and lower heat separately adjustable - each floor with its own steam box for steam - with program memory -can be driven on castors - Floor entrance height: 16.5cm -Height of castors adjustable -Year of construction 12 / 2006 -Electrical power supply: 9.6 kW External dimensions: Width: 97cm Depth: 144cm Height: 169cm (adjustable)

Dimensions (L/W/H): 0x0x0 mm Weight: 190 kg Total power requirement: 2,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shared oven Quail Mini Piccolo 4 Floor oven Quail Mini Piccolo 4 electric with 4 floors each 60x40cm with steam function for each floor separately. The oven is immediately available for sale in the warehouse with fermentation chamber and exhaust air hood including vapour condenser. Inspection of test baking and delivery possible. - 4 floors for 4x sheets 60x40cm - with guest cabinet - with hood incl. capacitor - DMS 3 Master Timer control - Upper and lower heat separately adjustable - Power: 16.5 kW - 400V / AC /3Ph / N / PE / 50 Hz -Floor entrance height 14cm -Year of construction 08 / 2007 Dimensions: Height: approx. 210 cm Width: approx. 98 cm Depth: approx. 100 cm

Dimensions (L/W/H): 2000x1960x1470 mm Weight: 900 kg Total power requirement: 8,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 475 mm centre height: 510 mm width: 110 mm loading area: 360x310 mm diameter of quill: 80 mm bearing diameter: 75 mm Wheel width: 36,5 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Machining max mm: 330 Ø mm: 40 Computer-aided measuring and displaying system for Measurement of tools, digital display of tool data Input of profile dimensions, calculation of spindle setting data Transfer to the machine by means of a label

Dimensions (L/W/H): 10000x2500x1600 mm Weight: 3300 kg Total power requirement: 16,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 800x600x500 mm Weight: 60 kg Total power requirement: 0,25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3940x850x1350 mm Weight: 410 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 3500 kg Total power requirement: 57,7 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3150x4000x1900 mm Weight: 1500 kg Total power requirement: 36 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Part Number 6393 TECHNICAL DATA - max width of the workpiece 200mm - max height of the workpiece 150mm - number of spindles 4: 1) horizontal bottom 200mm 5,5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal upper 200mm 5,5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000rpm in advance: - pulling introductory shafts, toothed 6 pcs including 2 double - 1 pulling shaft, rubber bottom: - introductory shaft toothed, pulling, torsional in the lower table top - side pressure 3pcs - lead roller, pulling, metal, smooth - all pneumatically pressed rollers - length of the introductory table top 2130mm - table top adjustable up / down - central lubrication - electrical setting of planing thickness - lifting motor 1,1kW - smooth regulation of the feed speed on the inverter - feed motor 3kW - feed  ...

Dimensions (L/W/H): 6800x2900x2100 mm Weight: 4500 kg Total power requirement: 36 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutter K+G Wetter CutMix 200 STL with load for 200 liter standard car and ejector, 200 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection cover, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely adjustable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, K+G weather CM 200 STL

Dimensions (L/W/H): 3900x2230x3900 mm Weight: 1500 kg Total power requirement: 18 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x1295x1300 mm Weight: 1500 kg Total power requirement: 16,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutter K+G Wetter CutMix 120 STL with load for 120 liter standard car and ejector, 120 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection lid, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely variable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, rated power 42.5 kW, K+G weather CM 120 STL

Dimensions (L/W/H): 3000x1070x1200 mm Weight: 1150 kg Total power requirement: 10 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 50 mm pre-bending: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

From linear to combination scales Application: Dosing free-flowing general cargo in accurate quantities. Characteristics of the scale • High accuracy • All parts in contact with the product are made of smooth 304 stainless steel • Simple operation, easy to clean and can be dismantled without tools • Control Panel: 7" Touch Screen • Low maintenance • Synchronization with all packaging machines possible Specifications • Number of weighing heads: 10 • Weighing container: 2,5l • Weighing range: 10 - 1000g • Accuracy: ± 1.0g - 1.5g • Speed: up to 60 sachets/min (depending on product) • Control panel: 7" touch screen display • Opening of the container flaps by means of stepper motors • Power: 230V / 1.3KW / 50(60)Hz / 10A • Dimensions (LxWxH): 1700mm x 1100mm x 1265mm • Machine weight: 380kg

Dimensions (L/W/H): 4500x1200x1200 mm Weight: 1500 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6900x1750x1660 mm Weight: 450 kg Total power requirement: 4,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 800x600x500 mm Weight: 60 kg Total power requirement: 0,25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x900x1700 mm Weight: 1900 kg Total power requirement: 15 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 820x1150x1580 mm Weight: 450 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6000x1150x2980 mm Weight: 800 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3076x1250x1600 mm Weight: 2000 kg Total power requirement: 25,32 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathe WIA L 200 SY Manufacturer: Hyundai YEAR: 2014 Control Fanuc ... Fanuc 31i Turning diameter ... 550mm Rotation length... 530mm Axis Y ... +-40mm Counter spindle Spindle bore... 70mm Tool turret... 12 L x W x H ... 3045 x 1707 x 2021mm Machine weight ... 4600kg The machine is in good condition, possible to test under power.

Dimensions (L/W/H): 2650x950x1850 mm Weight: 2100 kg Total power requirement: 15 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cooling cell with quail cooling motor Year of construction 2011 Coolant: R134a 2207 Height: 250cm Width: 90cm depth: 225cm

Dimensions (L/W/H): 600x700x1050 mm Weight: 120 kg Total power requirement: 1,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Altendorf WA6 Format circular saw new Format sliding table: 2600mm Engine power: 400V 4 KW (5.5 hp) Saw blade: 315mm swivel: 90°-45° Pre-scoring unit: with engine 0.37 KW (0.5 HP) For wood, plastic and non-ferrous metal G&AL-WA6-2600 ASSEMBLED CHECKED AND MEASURED! SPECIAL PRICE Format sliding table:also in 1600mm SPECIAL PRICE Accessories: Saw blade pendulum protection (upper protection) for saw blade 350mm

Dimensions (L/W/H): 5000x3400x1900 mm Weight: 8000 kg Total power requirement: 48 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 300 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Quail shared shop oven Type: Piccolo II-6 Floor 120x80cm DMS 3 Master Control Year of construction 2005 Electric oven 50.4kW with hood Height: 235cm Width: 155cm Depth: 130cm

Expanded In rotating condition due to new motorization wirt sold and pictured

WALDRICH SEIGEN WST IV H80 X 12000 ROLL GRINDER YEAR: 1981 / INSTALLED 1982 MAXIMUM GRINDING DIAMETER: 78” ( 1981.2 mm) WITH 32” (812.8 mm) DIAMETER WHEEL MAX DIAMETER CAPABILITY: 2500mm DISTANCE BETWEEN CENTERS: 472.40” (12000mm) MAXIMUM WORKPIECE WEIGHT: 176000 lbs. (80t) WHEEL OD MAXIMUM: 32.00” WHEEL WIDTH MAXIMUM: 4.00” WHEEL ID: 12.00” WHEEL SPINDLE POWER: 27 - 59/59 HP WHEEL DRESSER: BED MOUNTED ROLL WHEELHEAD TRAVEL: 25.60” TABLE TRAVEL: (WHEEL HEAD TRAVEL) 488.40”( 12405 mm) TABLE SPEED: (WHEELHEAD SPEED) 157.5 in/min (4000 mm/min) WHEEL SPINDLE SPEED: 450 - 1800 RPM Infinitely Variable WORKHEAD POWER: 1.9 - 59/59 HP WORKHEAD SPEED: .5 - 300 RPM WAYS: CAST IRON FULL HYDROSTATIC SLUDGE CONVEYOR: NONE COOLANT: YES FILTRATION SYSTEM: COMBINATION 2 CARTRIDGE AND FABRIC FILTER WAY COVERS: METAL TELESCOPIC POWER 3PHASE / 50-60 Hz / 200 - 50 ...