127,904 used machines on RESALE, but how to find them? Machine Search
Type 500 Motor power 3 kW, 1450 rpm Blade length 4100 mm Blade width 19~38 mm Blade speed 18 m/s Throat / max. cutting width 500 mm Max cutting height 350 mm Table dimentions 730 x 480 mm Tilting table 0°~ 45° Dust port diameter 2 x 100mm
Used centrifuge (with base) Speed performance: 2050 RPM Drum diameter: 610 mm Drum wall thickness: 14 mm Drum material: ST52-3N Weight: 5600 kg not ready for operation (major overhaul extra charge!)
Brotschneidegatter, Fabr. Wabäma,
Vibrator 4 tubs WALTHER TA.4/72 Internal tub dimensions: L 800 x W 250 x H 300 mm Coating Tubs No 2/3/4: in good condition Coating Tub No 1: used Motor 7,4 kW New electrical panel: starting by electronic variator Concrete base 2 exits at the front Voltage 380 V Dimensions (L x W x H) 2500 x 2100 x 1200 mm Weight approx. 3 T MACHINE IN OUR STOCK IN FRANCE.
Hint: No screw material included. Technical data on the restock straps: Manufacturer: Jung Heinrich Type: MPB The scope of delivery includes: 02x Top-up tabs, used total height: approx. 320 mm overall width: approx. 110 mm Inner width: approx. 102 mm f. Frame profile width: approx. 100 mm Depth: approx. 50 mm Material thickness: approx. 4.00 mm Hole spacing i. d. depth: approx. 50 mm Perforated grid i. d. width x height: approx. 60 x 50 mm Drill holeØ: approx. 10 mm Material color: blue Weight | pcs.: approx. 1,860 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.
This ploughshare / inclined bucket mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Machine name: Ploughshare / Inclined bucket mixer Manafacture: MAP Type: WBHP 15000 Year of construction: 2013 Hours: Zero Material: Mild steel S235J Drive motor: Here you can choose between 160 kW, 200 kW and 250 kW Designation: Single-shaft horizontal mixer Design: Batch mixer Usable volume: 4,500 - 10,500 litres Equipment tools: Plowshares (screwed) Dimensions: L 6124 mm x W 2800 mm x H 2525 mm Empty weight: weight 8000 kg Tech. Documentation: Yes Note: Since the tools are screwed, it can be used both as a ploughshare mixer and as an inclined bucket mixer. This horizontal mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Condition: New and workshop overhauled Price: On request
Laser cutting machine MAZAK Year of manufacture: 1999 Laser power 1,5 KW CNC MAZATROL Working range: 2500 x 1250 x 100 mm Max sheet dimensions: 2500 x 1250 x 12 mm Cooling system Extraction system Transformer Pneumatic sheet metal clamp Ball support for easier positioning of the plate Technical documentation available
Used centrifuge Performance speed: 1400 RPM Drum diameter: 900 mm Drum wall thickness: 16 mm Drum material: ST52-3 Weight: 11,500 kg not ready for operation (major overhaul extra charge!)
Wilo IL50/270-4/4-S1 glanded single pump 4000W pump 2060085/0810, 4kW, IL50 270-4/4-S1, centrifugal pump, 3~400/690 V, 50 Hz, DN50 PN16 Condition: unused item, but showing slight signs of storage (see pictures) EAN: 4016322797777 Manufacturer's specifications for technical data:Hydraulic dataMinimum Efficiency Index (MEI)0.4Minimum. Liquid temperature T min-20 °CMax. Liquid temperature T max140 °CMax. Ambient temperature T max40 °CMaximal operating pressure PN16 barNote on dimensioning16 bar to 120 °C, 13 bar to 140 °C Motor dataMains connection3~400 V, 50 HzVoltage tolerance±10 %Motor efficiency classIE3Nominal power P 24 kWBrated current I N8.2 ANominal speed n1450 1/minPower factor cos φ0.79Motor efficiency η M 50 %85.8 %Motor efficiency η M 75 %87.6 %Motor efficiency η M 100 %88 %Motor winding up to 3 kWMotor winding from 4 kW insulation classFSuity motorIP55 ...
SCHARMANN HEAVYCUT 2 WFT 150 CNC Floor type Boring Mill Year 1978 Spindle Diameter: 5.9" (150mm) Milling Spindle Diameter: 11.02 (280mm) Spindle Taper: CAT 50 Ram Cross Section: 11.81" x 11.81" (300x300mm) Vertical Head Travel, Y-Axis: 137.79" (3500mm) Column Travel, X-Axis: 712.59" (18000mm) Quill Travel, Z-Axis: 23.43 (595mm) Ram Travel, W-Axis: 27.6" (700mm) Z & W Axis, Combined: 51.03" (1296mm) Spindle Speeds: 5.5-1000 RPM Spindle Feed Range: 0.003-240 IPM Rapid Traverse: 396 IPM Spindle Motor: 70 HP/ 105 HP EQUIPPED WITH: Heidenhain TNC 407 CNC Controls Ram and Spindle Travel Sliding Way Covers On X-Axis Bed Right Angle Head With 1 Degree Manual Indexing Hardened Ways Re-pained recently
Used centrifuge Performance speed: 1400 RPM Drum diameter: 900 mm Drum wall thickness: 16 mm Drum material: ST52-3 Weight: 14.000 kg not ready for operation (major overhaul extra charge!)
Hypoid gearbox, I=175, TPK+050S-MF3-175-0E1-1S11, Wittenstein, new -40% Special price The current new price of a similar product is € 4,565 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Low backlash Wittenstein hypoid gearbox (alpha Advanced Line) - Type: TPK+050S-MF3-175-0E1-1S11, I=175, - Suitable for servo motor attachment Siemens 1FK7042-2AF71-1CH1, - Free additional flange, see photos - Motor side: Centring D81mm, for motor shaft D19mm, plug-in sleeve, - Gearbox: Centring D140mm, pitch circle D168mm x z12, - Additional flan ...
MULTI MOULDER machine type WEINIG PFA 17N second hand machine 6 spindles with tools - Composition : 1° shaft : surface planer . motor power Hp 5,5 2° shaft : spindle moulder . motor power Hp 4 3° shaft : spindle moulder . motor power Hp 5,5 4° shaft : spindle moulder . motor power Hp 5,5 5° shaft : thickness planer . motor power Hp 5,5 6° shaft : surface planer. motor power Hp 5,5 inlet length mm. 2000 feed speed: from 7,8 to 58,8 mt./min max. useful working width mm. 170 max. useful working height mm. 120 lubrication system weight kgs. 2600 volt. 380/50
Used centrifuge Performance speed: 1000 rpm Drum diameter: 1385 mm Drum wall thickness: 25 mm Drum material: ST-52-3N Weight: 22000 kg not ready for operation (major overhaul extra charge!)
Hypoid gearbox, I=500, SPK+100S-MF3-500-0E1-1S11, Wittenstein, new -40% Special price The current new price of a similar product is € 3,430 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Low backlash Wittenstein hypoid gearbox (alpha Advanced Line) - Type: SPK+100S-MF3-500-0E1-1S11, I=500, - Suitable for servo motor attachment Siemens 1FK7042-2AF71-1CH1, - Motor side: centring D81mm, for motor shaft D19mm, plug-in sleeve, - Gearbox: centring D90mm, shaft D32mm, Attention: We have the complete winding drive, rewind drive D75mm an ...
Used centrifuge Performance speed: 2200 rpm Drum diameter: 900 mm Drum wall thickness: 18 mm Drum material: 1.7382 Max capacity: 740 dm³ Max. Density: 1.4 kg / dm³ Weight: 10,500 kg Maximum operating temperature: 50°C Maximum operating pressure: 1 bar not ready for operation (major overhaul extra charge!)
Used centrifuge Performance speed: 1000 rpm Drum diameter: 1385 mm Drum wall thickness: 25 mm Drum material: ST-52-3N Weight: 22000 kg overhauled, ready to use
Key data: 3240 KW, 3294 kVA, 10500 V
Electricity and heat generator from 1998 with 61,000 operating hours, BSService at 50,000, then another 10,000 operating hours, complete (still installed). 1 available 2,635 kWel x 1,000 rpm, 10,500 V/ 50 Hz. AC generator: ABB AMG 630 L6, 3,294 kVA CHP Wärtsilä W16V25SG Manafacture: Wärtsilä Model: W16V25SG Type: Gas-fired CHP Serial Number: 4008 Mechanical power [kW]: 3.140 Thermal power [kW]: 4.272 Power fired [kW]: 8.134 Exhaust gas temperature [°C] 420 AC generator ABB AMG 630 L6 Manafacture: ABB Model: AMG 630 L6 Type: AC Synchronous Generator Serial Number: 106824 Power [kVA]: 3300 Voltage [V]: 10.500 Frequency [Hz]: 50 Current [A]: 181 Speed [1/min]: 1,000 Year of construction: 1998 Weight [kg]: 10.970
Used centrifuge Performance speed: 2200 rpm Maximum operating speed: 1800 rpm Drum diameter: 909 mm Drum wall thickness: 18 mm Drum material: 1.7382 Max capacity: 740 dm³ Max. Density: 1.4 kg / dm³ Weight: 10,500 kg not ready for operation (major overhaul extra charge!)
Used centrifuge semi mobile (with base) Drive motor: 200 kW Type Rotodiff: 1120Q Type hydraulic: B/C 75-180 KE Performance speed: 1600 rpm Maximum operating speed: 1600 rpm Drum diameter: 1123 mm Drum wall thickness: 23 mm Drum material: 1.7380 Max capacity: 1600 dm³ Max. Density: 1.4 kg / dm³ Maximum operating temperature: 50°C Maximum operating pressure: 1 bar Weight: 19.400 kg not ready for operation (major overhaul extra charge!)
Key data: 500 mm, 160 mm
Optimisation cross-cut saw OptiCut S 90 Speed - Left-hand version Max. wood entrance length 7.2 m Wood dimensions to be processed Sawing unit for large wood cross-sections with saw blade diameter Ø 500 mm Saw blade made of tungsten carbide, Z=144, WZ 20° Saw Blade Drilling 30 mm Saw blade speed max. 3600 rpm. Input lengths min./max. Widths min./max. Thicknesses/thicknesses min./max. Nominal cross-sections (without board curvature) Min. 500 - 7200 mm 23 - 160 mm 12 - 100 mm 23 x 12 mm .max. 160 x 100 mm Package size at max.9 strips per package Packet Ratio Width and Length to Thickness 160x100 mm 2:1 Fixed length min. 60 mm Performance / Positioning Moving speed of the positioning slide infinitely variable max. approx. 240 m/min. Cutting time / cutting height Adjustable The practical daily output depends to a large extent on the production ...
Used centrifuge Drive motor: 200 kW Type Rotodiff: 1120Q Type hydraulic: B/C 75-180 KE Performance speed: 1600 rpm Maximum operating speed: 1600 rpm Drum diameter: 1120 mm Drum wall thickness: 23 mm Drum material: 1.7382 Max capacity: 1600 dm³ Max. Density: 1.4 kg / dm³ Maximum operating temperature: 50°C Maximum operating pressure: 1 bar Weight: 22,000 kg not ready for operation (major overhaul extra charge!)
Used centrifuge Drive motor: 11 kW Type hydraulic: Replacement C11 - 40Z Speed performance: 2050 RPM Drum diameter: 610 mm Drum wall thickness: 14 mm Drum material: 1.4571 Max. Density: 1.5 kg / dm³ Weight: 7200 kg completely overhauled, Stainless steel, ready for use
TIMESAVERS 41 SERIE 1350 WRD deburring machine was manufactured in 2004 in the Netherlands. The wide belt deburring machine is used in both small and large production facilities for precision smoothing of sharp edges and finishing work. The machine provides high performance and reliability throughout its service life. The surface machining of workpieces made from e.g. steel, aluminium and titanium is performed wet by a grinding system comprising a reliable abrasive belt and brush unit. The workpiece is dried at the end of the machining process so that the parts leaving the machine are dry and free of contamination. The deburring machine has an integrated paper belt filter into which the used coolant is transferred at the end of the process in order to separate the swarf and allow the coolant to be reused. Technical specifications of the TIMESAVERS 41 SERIE 1350 WRD deburring machin ...
Used centrifuge Semimobil (with base) Hydraulic: B/C 55-180 KE Speed performance: 1130/RPM Drum diameter: 1120 mm Drum wall thickness: 20 mm Drum material: ST52-3N Weight: 17,000 kg not ready for operation (major overhaul extra charge!)
Producer: Bolz Producer: Sinks Allgau Capacity: 500 l The tank is equipped with 2 probes to measure the filling level.
JJZ-CP type press designed for the production of plywood, doors, MDF. The glued elements are fed and removed from the press automatically by means of driven rollers. The press can be used with glue feeders. Specifications: -max. pressure 500T/ adjustable/ -max. load height 1300mm -max. batch size 1300x2500 -press size 3600x1370x4500 mm -press foundation ~500 mm below the floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max. power 13.2 kW -Ce -capacity of 6 batches per hour Currently, we glue panel doors and MDF board on presses. Very good technical condition. We offer a plywood production line dedicated to these presses.
Used centrifuge Speed performance: 3040 U/min Drum diameter: 552 mm Drum wall thickness: 12 mm Drum material: StE 460 Max. Density: 1.3 kg / dm³ Max. Item material temperature: 10 - 50°C Weight: approx. 5220 kg not ready for operation (major overhaul extra charge!)
Technical data of the pallet rack crossbeam: Shelving system: Modulblok The scope of delivery includes: 01x Pallet rack crossbeam, used Material colour: white Box profile: 100 x 40 mm Agraffe: 5 HK (hook) Clear width: 3,305 mm 02x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.
Compressor Worthington in very good condition, incl. dryer Description in the annex!
MAsson gear Box Marine W 8000 C Ratio 1.98:1 power 1410 KW @1000 rpm Building year 2005 low hours
Description Waldrich Siegen CNC lathe for heavy machining Details Conversion to CNC 2006 Center distance 22,000 mm Maximum turning length Support 1: 20,000 mm Maximum turning length Support 2: 20,500 mm Largest turning diameter over support 1,600 mm Largest turning diameter above bed 2,000 mm Workpiece weight max. 70,000 kg Face plate diameter 2,000 mm Face plate speed, infinitely variable in 4 steps 1.2 - 75 rpm. Maximum torque at speed 5.65: 170,000 Nm Main motor 110 kW Largest clamping diameter on headstock ⌀ 920 mm Mounting in roller block (passable) 2 pieces 600 - 1290 mm Mounting in bezels (passable) 100 - 775 mm Control system Siemens SINUMERIK 840D Support 1 and 2 (to headstock) Displacement of the upper support 550 mm Displacement of the slider 400 mm Quick longitudinal adjustment (rapid traverse) 3,000 mm/min Q ...
Cylinder head for Wärtsilä 22/26 Reconditioned, ready for dispatch. Info by request. Part no: 120020 Drwg. No: 0V12A82
TO WHOM IT MAY CONCERN; WE VE 2 SETS COMPLETE WARTSILA DIESEL 16V25 ENGINES AT OUR STOCK. ENGINES ARE IN GOOD WORKING CONDATION. ENGINE CRANK SHAFTS HAS STANDART SIZE HARD MARKING ON IT. ENGINES READY TO INSPECTION AND READY TO TRANSPORT. PLS FIND ENGINES DETAILS ON BELOW TYPE 16V25 ENGINE SERIAL NO. 4062 & 4063 POWER 3230kW RATED SPEED 900 RPM RUNNING HRS 27402 & 24816 YOB 1997 IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY
Manufacturer: Weinbrenner Type: TSV 6 / 3050 Year of constr.: End of 2015 demonstration machine Cutting length: 3050 mm Cutting capacity: 6 mm (steel) Hours of operation: 54 Control: Cybelec DNC 60 Dimensions L/W/H: 4100/2050/2100 mm Table height: 1000 mm Weight: 8500 kg Min. cutting angle: 1° Cutting angle max.: 2.5 ° Stroke rate minimum: 20 min. Max speed: 25 min. Cutting gap adjustment: motorized Cutting angle adjustment: hydraulic Number of holders: 14 Rear velocity range: 1000 mm Security: setting the photocell safety on the front and back Oil filling: 225 l Electrical power: 15 KW Power consumption: 3 x 400 V / 50 Hz Back-up fuse: 50 A Additional equipment: Extension of the side stop on 2050 mm Side stop side swing-away A total of 8 support arms freely movable along the entire length of the table The machine is a demonstration machine in mint cond ...
Type MJ1435F Feed speed (inverter) 6-35 m/min. Spindle diameter 70 mm Diameter of sawblades 250-355 mm Cutting width 300 mm Cutting height 100 mm Min. cutting length 360 mm Motor power 22 kW Total power 26,1 kW Transport dimensions 2670x1200x1500 mm Weight 1700 kg Delivery term: ~ 3 months.
Specification type S120/S260 Working width 20-120mm/20-260mm Working thickness 12-50mm/12-80mm Max. cutting size 80x50mm/180x80mm/150x100mm Width of work table 330mm/330mm Min. ingoing length 400mm/400mm Feeding table width 80m/min/80m/min Number of main feeding wheels 5/5 Saw blade 405mm/455mm/455mm/510mm Saw spindle speed 3500r/min/3500r/min Saw blade motor power 5.5kw/5.5kw Saw blade speed (up-down) 2-4 times/1sec./2-4 times/1sec. Lifting motor power 3kw/3kw Feeding motor power 3kw/3kw Pressing wheel motor power 0.18kw/0.18kw Total power 12.43KW/12.43KW Air Tolerance 1000NL/min/1000NL/min Air Pressure 0.6mpa/0.6mpa Diameter of dust extraction Ф140mm/x2/К140mm/x2 Extraction speed 30m/s/30m/s Weight 1000/1000 KG Dimensions 6500x1400x1800mm/6500x1400x1800mm Price: 31000/32500 € (EXW Jonava, Lithuania)
ID2430 Waagner Biro Wet Ball Mill 260 x 550 cm year/Year of construction 1987 52 t Wet ball mill, overflow ball mill, drum diameter 2600 mm, grinding track length 5500 mm, ground material: limestone 0-10 (16 mm), wet grinding process, 2-stage cyclone circuit, nominal grinding capacity: 12-22 t/h, filling weight max./normal: 44/39 t, installed engine power: 450 KW, rubber Skega armor Wet ball mill, overflow ball mill, drum diameter 2600 mm, grinding track length 5500 mm, regrind: limestone 0-10 (16 mm), wet grinding process, 2-stage cyclone circuit, nominal grinding capacity: 12-22 t/h, filling weight max./normal: 44/39 t, installed engine power: 450 KW, armouring rubber skega
Liquid pumps, sold as mixed lots of approx. 10 tons. Various capacities and brands
HWS 720 K Tilting circular saws Electric motor with direct drive Saw blade diameter: 700 mm Speed: 1400 1/min 400V 50 Hz Working height: 850-1150 mm Rocker pad: 735 mm Dimensions: 1270 x 730 x 1130 mm Weight: 100kg G & PIECES 5965721
Now available: NEW Wartsila 8 cylinder L20 crankshaft available from stock (ex Warehouse Bengi NL) Class certificate Price upon request
CATALOG NO. 7176 TECHNICAL DATA - loading hopper inlet 1050x600mm - outlet for chipped wood, diameter 160 mm - rotor working width 590mm - main engine 18.5kW - pump motor 0.75kW - number of knives 14 pcs - knife dimensions 30x30mm - 10x12mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1900x1200x1530mm - weight 990 kg ADVANTAGES – autoreverse – German production – unpainted – like WEIMA WL4 – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 48900 PLN Net price: 10867 EUR depending on the price 4.50 EUR Net price: 12868 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulde ...
EinspannmaÃ?e: 1600 mm x b: 2900 mm frame: 1600 mm x b: 2600 mm â?¢ Pression-Druck by 1T, self-locking, 140 mm â?¢ Versatility - many applications (frame, body, surface gluing) â?¢ Workload - ergonomic posture â?¢ Save time with user-friendly operation â?¢ Frame are bolted and therefore can be disassembled â?¢ Pressing units galvanized G & FE-RPW-3000PL
maximum number of results exceeded
please refine your search
