w 100a used for sale

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 979; Engine: 1103A-33TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 145

This 3-axis HOMAG WEEKE OPTIMAT BHX 055 was manufactured in 2018. It features a workpiece length capacity of 200 - 3,050 mm and a workpiece width of 70 - 850 mm. The machine includes 13 vertical drilling spindles and 4 horizontal drilling spindles, providing versatile machining capabilities. If you are looking to get high-quality CNC processing capabilities, consider the HOMAG WEEKE OPTIMAT BHX 055 machine we have for sale. Contact us for further details.

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 2854; Engine: Perkins 1506A-E88TAG4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 528

Warco WM40 turret mill with 2 axis DRO and with a third DRO retro fitted to the knee (Z axis). The X axis has powered feed and the knee has powered height adjustment.

Mass finishing machine / WALTHER CC315 incl. control system -Model CC315 -Speed range 945-1445 rpm -Separate control/on/off/timer etc. -Soundproof cover -Waste water cover Dimensions: LxWxH 2x1.6x1.6 meters / Weight 850Kg

WALTHER Trowal Type CA 650 -Drum diameter 1600mm -Speed 1450 rpm -Timer -CENTRIFUGE -Soundproof cover -Stair landing -Power 11KW Hebkswbtdlon Au S Tsl

Hamlet of Commodor B -GS - Identifier -3 - Axis digital display "NEW" - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Four-jaw chuck - Electric lining protection -2x Emergency / Off -Swarf back wall -Coolant device - Work light - Multifix with inserts -Documentation

Weiler Commodor B incl. 3 - axle digital display /Heidenhain - GS - Identifier - 3 - Axis digital display - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Three-jaw chuck - Feed protection - 2x Emergency / Off - Swarf back wall - Multifix with inserts -Machine feet - Documentation Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Guillotine Shears WEIKA 3200x10mm -Exhibition Machine / Unused -Cutting length 3200mm -Max. cutting thickness - steel 10mm Hjbkn Auowatxgj S Tjl - Max. cutting thickness - stainless steel 6mm -Max. cutting thickness - aluminum 12mm -Electric digital backgauge -Footswitch -Light barrier / Right -Left -Front support with ball rollers -Drive power 11KW Dimensions: LxWxH 4x2x1.9 meters / Weight 8000Kg

Weiler Condor B with Heidenhain 3 - Axle Digital Display -Circumferential diameter over bed 330mm -Turning diameter above the face slide 185mm -Tip height 165mm -Turning length 750mm -Spindle speeds 22-2800 rpm -Spindle passage 40mm -Tailstock quill holder MK 3 -Quill stroke 110mm -Total power requirement 3kW -Heidenhain 3 - Axis Digital Display -Multifix holder -Multifix cassette 3 pieces -3 jaw chuck Forkardt -div. machine key -Machine feet -LED work light -Lining protection with electrical shut-off -Revolver stop -Documentation/Instruction Manual Dimensions: LxWxH 1.8x0.8x1.2 meters / 1040Kg

Leit & Tension Spindle Lathe WEILER COMMODOR 180 GSD / New -Unused -Exhibition machine / zero operating hours -CE marking -3 - Axis Digital Display -Tip width 1000mm -Tip height 180mm -Spindle passage 56mm -Circumferential diameter over bed 380mm -Circumferential diameter via face slide 215mm -Speed range / gearbox 25-2000 rpm -Automatic longitudinal/plane feeds -Thread/Inch/Metric/Diametrical -Tailstock / quill cone MK 4 -Quill stroke 150mm -Coolant device -Multifix with insert -Three-jaw chuck 200mm -Work light -Swarf back wall -Documentation Dimensions: LxWxH 2.6x1.6x1.7 meters / Weight 2000Kg

Walther CN - 550 -PN Mass Grinding Machine and Rösler Z300 Turbo Floc Centrifuge -Walther Trowal CN-550-PN -1460 rpm -550 liter capacity -Motor 3.5 KW -Pneumatic soundproofing cover -Control cabinet -Dirty water / drain device -Compound - Sliding Stones 2xBoxes -Documentation -Dimensions: LxWxH 2x1.8x1.8 meters / Weight 1500Kg -Rösler - Z300 Turbo-Floc / Centrifuge -Year of construction 1996 -Rotor speed 3160 rpm -Power 4 KW -Max. throughput capacity 800 / litres / hour -Documentation -Dimensions LxWxH 1.7x1x1.6 meters / Weight 400Kg Hsbkn Aev Dlzpeu S Tol

L & Z lathe / WEILER DA 210x1000 / With new 3-axis digital display -Year of construction 2005 -CE - Identifier -Guided tours good -COMPLETE TECHNICAL DATA SEE PHOTOS - Three axis digital display "NEW" -Quick-release collet device incl. 79 x collets (173E) -Multifix base holder with inserts -Three-jaw chuck -Electric lining protection -Slide protection additionally -Coolant device -Drill chuck / rotating tip -Swarf back wall -Work light -Complete documentation Dimensions: LxWxH 2.8x1.2 x1.8 meters / Weight 1600 Kg

WEILER COMMODOR L&Z Spindle Lathe -Turning length 1000mm -Turning diameter max. 160mm Bar Passage 56mm -Speed range 25-2000 rpm -Automatic longitudinal/plane feeds - Thread: Metric/Inch/etc. -Tailstock Mk4 Hjbkn Au Ssun Ulhs Tsl -Three-jaw chuck approx. 250mm -Multifix base holder with insert -Coolant device -Electric lining protection -Swarf back wall -Machine documentation -Good operational condition Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Lead & Pull Spindle Lathe / WEILER COMMODOR 230 AC -CE marking -Year of construction 2002 -Tip height 230mm -Circumferential diameter over bed 475mm -Circumferential diameter over face slide 270mm -Tip width 1000mm -Spindle speeds 25 - 2000 rpm -Automatic longitudinal/plane feeds -Tapping/Metric/Inch/Module etc. -Spindle head Din 55027 / size 6 -Tailstock MK 4 -Drive power 11KW -Electric lining protection -Multifix base holder with inserts -Three-jaw chuck -Swarf back wall with work light -2x Emergency / Off -Coolant device -Machine feet -Documentation Dimensions: LxWxH 2.6x1.1x1.6 meters / Weight 1900Kg

Weiler Primus Type-MD-G -Tip height 125mm -Tip width 400mm -Speed range 80-4000 rpm -Spindle passage 24mm -Electric lining protection -Tailstock with drill quill -Work light -Four-jaw chuck -Multifix with inserts -Bed stop Dimensions: LxWxH 1.3x0.8x1.5 meters / Weight 400Kg

WEILER CONDOR VS 2 from university (test laboratory) -Guided tours "as good as new" -Three-axis digital display "NEW" -Tip height 165mm -Circumferential diameter over bed 330mm -Tip width 800mm -Speed range 28-2800 rpm -Automatic longitudinal/plane feeds -Spindle passage 40mm -Thread/Metric/Inch etc. -Collets - quick clamping device incl. collets -Vierbackenfutter-Röhm -Face Plate -Four-jaw chuck faceplate -Lining protection -Multifix with inserts -Emergency stop -Documentation -Unless otherwise stated, the price is /net/ plus VAT -Invoice will be issued Dimensions: LxWxH 2x0.8x1.6 meters / Weight 900Kg

WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Drill chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg

WEILER LZ330 / From educational institution incl. new 3-axis digital display -Turning diameter over bed 330mm -Turning diameter over support 165mm -Turning length 800mm -Speed range 25 - 2800 rpm -Automatic / longitudinal plan feeds -Multifix with 3x inserts -Drive power 3KW -Three-jaw chuck -Collet device with 20x collets -Copying device -Miscellaneous Accessories -Documentation Dimensions: LxWxH 1.8x0.7x1.6 meters / Weight 750Kg

L & Z lathe / WEILER CONDOR VS 2 with new 3-axis digital display from training company -3-axis digital display "NEW" -Tip height 165mm -Circumferential diameter over bed 330mm -Tip width 800mm -Speed range 28 - 2800 rpm -Automatic longitudinal/plane feeds -Spindle passage -Tailstock with tip -Collets / quick-release device incl. 25 x collets -Three-jaw chuck - Röhm 200mm with reverse jaws -Multifix /New with insert -Work light -Emergency / Off -Bed stop -Machine feet -Documentation Dimensions: LxWxH 2x0.8x1.6 meters / Weight 900Kg

Universal tool milling machine WAGNER FCA 400 -Year of construction 2008 -CE marking -3-axis digital display -Travel X/Y/Z 450x400x400mm -Rigid angle table 740x320mm -Automatic feeds in all three axes -Rapid traverses -Speed range 40-2000 rpm -Tool holder ISO 40 -Vertical / horizontal milling device -Vertical head with drilling quill -Safety handwheels -Coolant device -Horizontal - Counter bearings -Work light -Machine feet Dimensions LxWxH 1.4x1.2x1.9 meters / Weight 1800Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder rotary flash -4 lathe chisel holders Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder Multifix -4 lathe chisel holders -Drill chuck -Moving centering tip Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Collet device -Wedge bar chuck Forkardt F 16 -Quick-change holder Multifix -4 lathe chisel holders -Drill chuck -Moving centering tip Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

WIRBEL K 855 HP 7,5 Industrial Dry Vacuum Cleaner -CE - Identifier -Mint condition -Motor power 5.5 KW -Filter area 1.2 m2 -Tank volume 60 liters -Air flow rate 135 L/sec -Vacuum (vacuum) approx. 300mbar -Suction hose -Connection cable Dimensions: LxWxH 1.2x0.6x1.3 meters / weight 125 kg

This 3-axis Wenzel XO 55 CMM machine was manufactured in 2009. It features a travel range of 550 mm in the X-axis, 500 mm in the Y-axis, and 500 mm in the Z-axis. The machine includes a robust table size of 800 x 600 mm with a maximum table load of 300 kg. If you are looking to get high-quality measurement capabilities, consider the Wenzel XO 55 CMM machine we have for sale. Contact us for further details.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Paper cutting machine Wohlenberg 92 MCS-2TV under Power

Key data: 410 mm, 800 mm

TECHNICAL DATA Lathe Weisser Heilbronn Model No.: SENIOR Y.O.M. 1984 Centerheight 410 mm Swing over bed 810 mm Swing over Support 564 mm Spindle bore 105 mm max Workpieceweight between chuck and Pinole 22 tons Spindlerevolotions 8 -- 1250 Rev/min Main motor 15 kW Rapid traverse longitudinal 4 Jaw chuck 700 mm Moving Protection for guideaways longitudinal Digital Read Out 1 Steady Rest 0 - 130 mm Quick change Toolpost with inserts Coolant

Years: 1x 2012 1x 2011 1x 2010 1x 2006 2x 2008 (Is possible to buy 6 pieces)

Wittmann TP-PRIMUS C:90 Tempering Unit (2x) (2005)

Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Drive: Electric

General SKU292W527 LocationBarneveld Main Features MaterialStainless steel Motor10 KW Specified Features - Dissolver Dissolvercheck Disc diameterMax dia. 250 mm Motor10 kW, 380 volt, (Ex) With variable speed drive360-1800 rpm With mechanical liftingcheck Motorcheck MaterialStainless steel Information MakePendraulik TypeWDV10 With switchcheck ATEX compatiblecheck Extra SpecificationsMixing disc and Stahl control : : Drum capacity 400-1350 kg, max drum diameter 600-900 mm. Catalysts & fillersDissolversSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicOther chemicalFine chemicalsOintmentsPaints & coatingsOils & fatPendraulikIndustries > Chemical > Catalysts & fillersMixers > DissolversIndustries > Chemical > SolventsIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustrie ...

General SKU292W528 LocationBarneveld Main Features MaterialStainless steel Motor10 KW Specified Features - Dissolver Dissolvercheck Disc diametermax 250 mm Motor10 kW, 380 volt, (Ex) With variable speed drive260-1800 rpm With mechanical liftingcheck Motorcheck MaterialStainless steel Information MakePendraulik TypeWDV10 ATEX compatiblecheck Extra SpecificationsMixing disc and Stahl control : :Drum capacity 400-1350 kg, max drum diameter 600-900 mm.Catalysts & fillersDissolversSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicOther chemicalFine chemicalsOintmentsPaints & coatingsOils & fatPendraulikIndustries > Chemical > Catalysts & fillersMixers > DissolversIndustries > Chemical > SolventsIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > Lubricants ...

General SKU292W514 LocationBarneveld CEcheck MakePendraulik Main Features MaterialStainless steel Motor7.5 KW Specified Features - Dissolver Dissolvercheck Shaft length1370 mm Disc diametermax 200 mm Between shaft and frame500 mm Motor7,5 kW, 400 volt, 1450rpm (Ex) Speed mixing shaft360-1800 rpm With mechanical liftingcheck Motorcheck MaterialStainless steel Information TypeWDV 7,5 Year of constructionunknown With switchcheck Floorspace0,56 m Total height3,45 m Weight840 kg ATEX compatiblecheck Extra Specificationsdrum cap. 400-1350 kg. max drum dia. 600-800 mm Catalysts & fillersDissolversSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicOther chemicalFine chemicalsOintmentsPaints & coatingsOils & fatPendraulikIndustries > Chemical > Catalysts & fillersMixers > DissolversIndustries > Chemical > SolventsIn ...

General SKU292W515 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor5 KW Specified Features - Dissolver Dissolvercheck Shaft length1370 mm Disc diametermax dia. 200 mm Between shaft and frame500 mm Motor5,0 kW, 400 volt, (Ex) With variable speed drive360-1800 rpm With mechanical liftingcheck Motorcheck MaterialStainless steel Information MakePendraulic TypeWDV 5.0 With switchcheck Floorspace0,56 m Total height3,45 m Weight840 kg ATEX compatiblecheck Extra Specificationsdrum cap. 400-1350 kg, max dia. 600-800 mm, with mixing disc, Stahl controlCatalysts & fillersDissolversSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicOther chemicalFine chemicalsOintmentsPaints & coatingsOils & fatPendraulikIndustries > Chemical > Catalysts & fillersMixers > DissolversIndustries > Chemical > SolventsIn ...

General SKU292W506 LocationBarneveld CEcheck MakePendraulik TypeWDU 15 Main Features MaterialStainless steel Motor11 KW Specified Features - Dissolver Dissolvercheck Shaft length1370 mm Disc diametermax 280 mm Between shaft and frame465 mm Motor11 kW, 400 volt, (Ex) With variable speed drive150-1800 rpm With mechanical liftingcheck Motorcheck MaterialStainless steel Information No.415 Year of construction2008 With switchcheck Total height3,40 m Weight1250 kg ATEX compatiblecheck Extra SpecificationsWith mixing disc, Stahl control Drum dia. max 700 mm Catalysts & fillersDissolversSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicOther chemicalFine chemicalsOintmentsPaints & coatingsOils & fatPendraulikIndustries > Chemical > Catalysts & fillersMixers > DissolversIndustries > Chemical > SolventsIndustries >  ...

General SKU292W518 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor13.5 KW Specified Features - Dissolver MaterialStainless steel Dissolvercheck Shaft length1400 mm Disc diametermax dia. 280 mm Between shaft and frame530 mm Motor13,5 kW, 400 volt, (Ex) With variable speed drive300-1800 rpm With mechanical liftingcheck Motorcheck Information MakePendraulik TypeWDR 18 With switchcheck Floorspace0,78 x 1,0 m Total height3,52 m Weight1350 kg ATEX compatiblecheck Extra SpecificationsMixing disc and Stahl control Drum cap. 400-1350 kg, max drum dia. 600-900 mm, Catalysts & fillersDissolversSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicOther chemicalFine chemicalsOintmentsPaints & coatingsOils & fatPendraulikIndustries > Chemical > Catalysts & fillersMixers > DissolversIndustries > Chemica ...

General SKU292W513 MakePendraulik TypeWDU 11 No.414 Year of construction2008 LocationBarneveld Main Features MaterialStainless steel Motor11 KW Specified Features - Dissolver Dissolvercheck Shaft length1370 mm Disc diametermax 250 mm Between shaft and frame435 mm With hydraulic unitcheck Motor11 kW, 400 volt, (Ex) With variable speed drive150-2000 rpm With mechanical liftingcheck Motorcheck MaterialStainless steel Information With switchcheck Floorspace0,47 m Total height3,40 m CEcheck ATEX compatiblecheck Extra SpecificationsMixing disc and Stahl control Drum cap. 100-400 kg, dia. max 650 mm, : Catalysts & fillersDissolversSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicOther chemicalFine chemicalsOintmentsPaints & coatingsOils & fatPendraulikIndustries > Chemical > Catalysts & fillersMixers > Dissolv ...

Suitable for regrinding and production of wood and metalworking tools of all kinds., Accessories:, Total enclosure, Fanuc robot loader with 6 controlled axes and camera system, Software Toolstudio Standard & Advanced Version 3, Software Helitronic Toolstudio Option Step Tools/Drills, Automatic fire extinguishing system, Drive chiller for all drives, Measuring probe, Oil drip tray, Glass scales on the linear axes, Electrostatic mist collector, Pneumatic workpiece clamping, Automatic, hydraulically actuated steady rest, Camera system for optical detection and pre-positioning of tool blanks with cooling channels on the tool face., Measuring mandrel ISO 50, 3 grinding wheel adaptors, Longitudinal movement (X-axis): 400 mm, autom. X‘-axis for moving the workpiece carrier: 110 mm, Vertical movement (Y-axis): 320 mm, Transverse movement (Z-axis): 320 mm, Rotary table swivel range (C-axis): -  ...

WACO resaw line BKW-Twin, With Jonab de-stacking, infeed and outfeed

A double-sided trolley cooling system Werner & Pfleiderer for bread production is available. Refrigerant: R404A, refrigerant type: HFC, minimum temperature: -25°C, design temperature low pressure/high pressure: -45°C/50°C, design pressure low pressure/high pressure: 16bar/28bar, internal dimensions X/Y/Z: 1800mm/1200mm/1900mm. Machine dimensions X/Y/Z: approx. 2750mm/2200mm/3150mm. Baguette target temperature/cooling time: -20°C/28min, bread roll target temperature/cooling time: -20°C/14min, pretzel target temperature: -14°C. Documentation available. An on-site inspection is possible.

: 8000 kg length: 8000 mm width: 2000 mm height: 840 mm : star : lenhbar gear diameter: 620 mm weight of the machine ca.: 3,5 t dimensions: 8,5 x 2,03 x 0,84 m Heavy-duty trailer Surface: Chequer plate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 mm, 300 mm

Wagner FSG1224ADIII Grinding path 600 x 300 Magnetic clamping plate 600 x 300 Travel 650mm Travel manual 700mm Grinding removal 99,999mm Drive power 3.7 Kw Touch panel 8" TFT Compensation Training Adjustable adhesive force Automatic Nonwoven Roll Filter Stepless speed control 750 – 2100

A conventional universal milling machine Malick & Walkows is available. Table dimensions X/Y: 1000mm/300mm, speed: 1120rpm, travel X/Y/Z: 900mm/300mm/500mm, quill stroke: 80mm, feed rate: 250mm/min, machine dimensions X/Y/Z: approx. 1700mm/1900mm/1700mm, weight: approx. 1750kg. Including machine vise and accessories. An on-site inspection is possible.

Manufacturer: Pee-Wee Model: UPW 24 Type: Thread Rolling Machine Year of Manufacture: 2009 Weight: 2400 kg Rated Voltage: 400 V Control Voltage: 24 V Frequency: 3 Ph / 50 Hz Rated Power: 12 kW Rated Current: 32 A Fuse: 32 A Compliance: CE Marked Find more here - / Contact us at -

Band width: 200mm; Band length: 2600mm; Table size: 935mm x 460mm; Additional table: 350mm x 300mm; Veneer sanding equipment: yes; Oscillation: yes; Grinding unit swivel: yes; Suction port: 120mm; Motor power: 2.25 kW; Machine length: 1700mm; Machine width: 800mm; Weight: 400kg;

Wheels: 4; Speed levels: 2;

Key data: 63 t, 250 mm, 300 mm

Thread and Profile Rolling Machine Machine Type Cylindrical 2-Roll Thread Rolling Machine Max. Rolling Capacity (Force) 630 kN (63 tons) Workpiece Diameter (Min. / Max.) 25 mm / 200 – 250 mm Max. Diameter of Tools (Dies) 300 mm Spindle Diameter 110 mm Spindle Speed Range 10 – 100 rpm Spindle Drive Motor Power 22 kW Total Power Requirement (Connected Load) 26.5 kW Operating Rated Current 54 A Electrical Power Supply 380 V / 50 Hz (Three-phase current) Control / Auxiliary Voltage 110 V / 24 V Required Floor Space (Dimensions) 3072 × 2140 mm Total Machine Weight approx. 7500 – 8000 kg (7.5 – 8 tons) Design Features Twin-roller system: Works with a pair of cylindrical profile rollers. Materials: Suitable for working with high-strength steels, rods, and pipes. Application: Used in heavy engineering to create fasteners, shafts, and other components with i ...