w 100a used for sale

PART NUMBER 8009 SPECIFICATIONS - max material width 600mm - max cutting height 170mm - upper spindle diameter 70mm - Lower spindle diameter 70mm - Circular saw blade diameter: Option 1: 250mm/350mm Option 2: 300mm/300mm - upper spindle length, working part: 550mm - Lower spindle length working part 550mm - spindles equipped with a brake - spindle wedge 2pcs - Motor power of the top drive spindle 18.5kW - Bottom drive spindle motor power 22kW - Feed drive motor power 2.2kW - infinitely variable feed speed control on the inverter - average extraction port 2x200mm in advance: - 2 rows pawls - Toothed pulling shaft - shaft with saws - Toothed pulling shaft - Metal Sliding Roller from below: - pulling chains - shaft with saws - pulling chains - Metal Sliding Roller - overall dimensions l/w/h: 3170/1450/1730mm - weight about 2500kg ADVANTAGES – Polish pro ...

Part number 7994 SPECIFICATIONS - max width of the workpiece 230mm - max workpiece height 130mm 7 spindle: 1) horizontal bottom 230mm 4kW 2) Vertical right 130mm 3) Vertical left 130mm (2 and 3 spindle) 11kW 4) Horizontal top 230mm 5.5kW 5) horizontal top 230mm 5.5kW 4 & 5 Spindle Electrically Adjustable Up/Down 6) horizontal bottom 230mm 4kw 7) universal 230mm, 360° adjustable 5.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 pulling input rollers from above - 4 leading, pulling, rubber, smooth shafts from above, including 3 double - metal pulling roller at the bottom - feed on cardan shafts - pneumatically pressed rollers - infinitely variable feed speed control on the inverter - 3kW feed motor - working pressure 6-10bar - Electric planing thickness setting - central lubrication of the table top - length of the introductory tab ...

Swivelling angles: 45°/90°/135°, max. speed: 2800rpm, working length: 5350mm, saw blades: 2 carbide-tipped saw blades 420x30mm, extraction connection: 160mm, compressed air connection: 6-8bar, power per motor: 2.2kW, length: 4200mm, weight: 900kg. Features: hydropneumatic saw feed, digital display, center support, handwheel, four pneumatic clamping cylinders, electrical control for parallel operation of machine and extraction system, fixed stop 24mm next to the fixed saw unit, adjustable via scale, with documentation. An on-site inspection is possible.

Equipment: heatable/coolable, overpressure, vacuum, manufacturer: Schleifenbaum & Weber, condition: used, volume: 49,338, vacuum: 1.0, max. overpressure: 6.0, specific gravity of the medium: 1.5, lower shelf: clapper bottom, upper shelf: clapper bottom, design: upright, stand form: feet, number of feet: 4, heating/cooling (filter bar): available, max. permissible Operating overpressure double jacket / pipe chamber / bar: 6.0, Max. permissible Operating Temperature : 200,Temperature Control Cylinder: Half Tube Coil,Temperature Control Underbody: Half Tube Coil,Diameter Inside: 2.800,Diameter Outside: 3.100,Cylindrical Height: 7.483,Total Height:

Thread milling machine WMW GFL 400x2000 with change gears.

AIRCOOLED CHILLER TRANE 32,3 KW Cooling capacity: 32,3 / 9,2 tons kW (12/7 — 35°C) Year of manufacture: 2014 Refrigerant circuit: 1 pcs. Type of refrigerant: R-407C Compressors: 1 pcs. Danfoss (scroll) Heat exchanger: Plate Hydraulic module: water pump, buffer tank, expansion vessel Number of fans: 1 pcs. Dimensions: 1.06 x 1.25 x 1.80 m Weight: 394 kg Condition: good

Peristaltische slangpomp vermogen: 1,5 kW lengte: 1000 mm breedte: 800 mm hoogte: 650 mm gewicht: 118 kg

Peristaltische slangpomp vermogen: 3 kW lengte: 1000 mm breedte: 900 mm hoogte: 1100 mm gewicht: 118 kg

This 3-axis HOMAG WEEKE BHP200/VANTAGE714 CNC Machining Centre was manufactured in 2013. It features an impressive working area with an X-axis of approximately 4300 mm and a Y-axis of around 2250 mm. The machine is equipped with a powerful 10 kW spindle capable of reaching up to 24,000 RPM and includes a 14-position automatic tool changer. If you are looking to get high-quality CNC routing capabilities, consider the HOMAG WEEKE BHP200/VANTAGE714 machine we have for sale. Contact us for further details.

Peristaltische slangpomp vermogen: 1,5 kW lengte: 700 mm breedte: 670 mm hoogte: 500 mm gewicht: 17 kg

EU STAGE 5 Compliant, The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 2527; Engine: Perkins 1204J-E44TTAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, 50/60 Hz switchable frequency via terminal link, 115 kVA Prime power, Spark arresting silencer; Water Tank Volume [l]: 518

Information: - Engine turns - Not checked for function

Working width: 100 cm Engine turns not checked for function

Key data: 1500 kN

Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating Hours: approx. 29,000 in automatic mode Year of Make: 2014 Injection unit: Screw diameter: 50 mm Injection weight: 402.2 g Spray pressure: 1714 bar Dosing volume: 442 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x470 mm Size of the clamping plates: 760x755 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6P - Touch Screen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total number of operating hours: 36,714 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by inverter - Energy saving Dimensions: Weight: 6600 kg Length/Wid ...

Key data: 1100 kN

Wittmann Battenfeld EcoPower 110/350 / Electric motor / Operating hours: approx. 15,000 in automatic mode Year of Make: 2019 Injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Spray pressure: 2083 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 110 t Handlebar spacing: 470x420 mm Size of the clamping plates: 682x682 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B8 - Touch Screen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 15,000 in automatic mode Total number of operating hours: 21,800 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Central lubrication Dimensions: Weight: 4800 kg Length/Width/Height: 4.91x1.42x2.10 m  ...

Inv. Num. : 9187 Type: eCAB WorkCenter Producer: STEINHAUER Created: 2007 Parameters: Control system: Beckhoff Number of all tools: 18 pieces Max. tool diameter: 2-14 mm Working area: 2 200 x 1600 mm Cutting thickness: 5 mm Threads: M2-M12 Length: 3500 mm Width: 3000 mm Height: 2500 mm Weight: 3500 kg The tool clamp needs to be repaired.

Key data: 1100 kN

Wittmann Battenfeld EcoPower 110/350 with the Wittmann W818 robot / Electric machine / Operating hours: approx. 16,000 in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Spray pressure: 2083 bar Dosing volume: 169 ccm Clamping unit: Clamping force: 110 t Handlebar spacing: 470x420 mm Size of the clamping plates: 680x660 mm Ejector: electric Clamping unit: toggle lever Control:UNILOG B8 - Touch Screen Additional equipment: Perfect technical condition Electric machine: high-speed, energy-saving and very quiet Operating hours: approx. 16,000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Parallel movements The machine was servi ...

Reinecker Universal Tool Grinding Machine WZS-50 CNC Precision Grinding Machine Profile Grinding Machine Hersteller [manufacturer]: Reinecker Type [ type]: WZS-50 CNC Control unit: Siemens Sinumerik 880G Baujahr[construction year]: 10/1992 Incl. extinguishing system Incl. various accessories Travel axis: X – Y – Z – C – E Interface Type: E32R Weight [weight]: 3000kg Approx. (L x D x H): 3m x 3m x 3m Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted. We ask for your order. Other machines and systems available from stock – please inquire. We look forward to seeing you. Phon ...

Belt width: 700 mm, Radius: 1200 mm, Power: 3 x 400V, 50Hz, 0.2kW, Dimensions: 2200 x 1050 x 1100 mm

turning length: 450 mm turning diameter over bed: 245 mm turning diameter over slide rest: 135 mm spindle bore: 23.0 mm tool adaptor: DIN 55021-4 quill:: 2 MK quill travel: 80.0 mm turning speeds: 60 - 3000 U/min bed width: 155 mm total power requirement: 1.2 / 1.5 kW voltage: 380 V weight of the machine ca.: 340 kg. range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout D60- ...

turning length: 450 mm turning diameter over bed: 245 mm turning diameter over slide rest: 135 mm spindle bore: 23.0 mm tool adaptor: DIN 55021-4 quill:: 2 MK quill travel: 80.0 mm turning speeds: 60 - 3000 U/min bed width: 155 mm total power requirement: 1.2 / 1.5 kW voltage: 380 V weight of the machine ca.: 340 kg. range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout D60 ...

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2500 mm z-axis: 1250 mm W-axis (spindle longitudinal): 800 mm : ISO 50 P.D.B : 1800x2500 mm : 12 t : 3000 Hertz : 400 total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m ATC 40 positions Safety guarding Coolant The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was ...

Control Heidenhain ... TNC 640 Spindle diameter ... 110mm Axis X ... 3000mm Axis Y ... 2000mm Spindle speed ... 10-4000 rpm IKZ ... 70bar Axis W... 730mm Axis Z ... 1250mm Number of positions in the tool changer ... 40 Spindle holder ... ISO 50. Table size... 1400x1800mm Max. table load ... 8000kg Main engine power ... 31kW Machine weight ... 20800kg L x W x H ... 6250 x 5600 x 4450mm The machine is in very good condition, like new. Machine hours: 3,158 Spindle hours: 1,095 Hexagon workpiece probe

Descending spiral, infeed at the top, outfeed at the bottom, Belt width gross: 920 mm, Belt width nett: 880 mm, Tiers: 23 pcs., Link height: 80 mm, Product gap: 65 mm, Length per tier: 17.8 m, Belt length: 409 m, Refrigerant: NH3, ammonia, Evaporator size: 1800 m2, 975 L, Cooling power: 250 kW, Power: 3 x 400V, 50Hz, 64 kW

Including trim removal unit, Capacity: up to 3 cycles/min, Product length: max 750 mm, Belt width: 800 mm, Seal bar: 1350 mm, Vacuum pump: Busch Panda WV1500B roots, Compressed air: 6 Bar, 250 Nl/min, Power: 3 x 400V, 50Hz, 4kW, Dimensions: 3750 x 1500 x 2200 mm, Weight: 2200 kg

Screw conveyor with turnable outfeed shute, Diameter: 250 mm, Pitch: 190 mm, Infeed height: 1000 mm, Outfeed height: 2150 mm, Power: 3 x 400V, 50Hz, 15kW, Dimensions: 3800 x 1200 x 3200 mm

General SKU305U634 MakeHaver & Boecker LocationBarneveld CEcheck Type1 WXEH- (U) Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler MaterialStainless steel 1.4301 (304) Powder fillercheck Bag fillercheck Pneumatic fillingcheck Number of dosing heads:1 Dosing15 and 20 kg (max. 50 kg) Capacity30-100 bags/hour a 15 and 20 kg With motor 7,5 kW, 400 volt, 1500 rpm (EX) With hoppercheck Hopper sizesDia. 400x640 mm With mixer in hoppercheck Information No.51/246325/01 Year of construction2005 Mounted in framecheck With switchgearcheck Floorspace1,4 x 1,8 m Total height2,1 m Weight800 kg ATEX compatiblecheckPowder fillersPowdered foodsHaver & BoeckerPackaging machines > Powder fillersIndustries > Food & Feed > Powdered foodsBrand > Haver & Boecker What you can expect from Foeth: -- Machine is in working condition -- At a reduce ...

General SKU075B490 MakeGEA Westfalia Separator AG TypeSCA 220-02-33 No.8001 242 Year of construction1998 Mounted on framecheck Main Features MaterialStainless steel Motor15 KW Specified Features - Decanter DecanterThree phase twin drive decanter (1x) 3-Phase decantercheck Screw diameter220/125mm Motor15 kW, 400Volt + 4,0 kW, 400Volt With variable speed drive(2x frequency inverter) Max. rotor speed2700-5500 Rpm MaterialStainless steel Information LocationBarneveld With switchgearcheck Floorspace2,4x2,4 m Total height2,3 m Weight2800 kgDiscountDecantersGEA WestfaliaDiscountCentrifuges > DecantersBrand > GEA Westfalia What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barne ...

This Wagner WDE 500 PLUS was manufactured in 2021. It features a max turning diameter over bed of 500 mm and a spindle speed range up to 2200 rpm. Equipped with Siemens 828 B-T control for enhanced precision and a spindle motor power of 15 kW. Ideal for robust turning operations. Machine dimensions are 3400 × 1600 × 2100 mm, weighing approximately 5000 kg. For more information about this machine, please reach out to us.

MAX DIAMETER 800 , MAX MODULE 10

This 3-axis WAGNER WMC 600 L was manufactured in 2021, featuring a robust cast-iron frame and linear guides on all axes. It includes a Siemens 828 Basic ShopMill, an automatic double-arm tool changer with 16 stations, and a complete coolant system. The spindle supports speeds up to 10,000 rpm with a power of 11 kW. If you are looking to get high-quality milling capabilities consider the WAGNER WMC 600 L machine we have for sale. Contact us for more information.

MAX DIAMETER 315 , MAX MODULE 6

Manufacturer: Werner & Pfleiderer Lebensmitteltechnik - Type: MUS - 4-row - Year of construction: 2005

- Compact bread roll line - Manufacturer: Werner & Pfleiderer Lebensmitteltechnik - Type: Rollprofi - Suitable for the production of cut rolls, long-rolled rolls - 4 rows - Hourly output for 4 rows: 3750 pieces /h - Pre-proofing time: 6 minutes - Pre-proofing time between input and side discharge belt and 2000 pieces per piece - Pre-proofing time for double cut: 3 minutes - Pre-proofing time between input 6 minutes and long scooters: at max. power - Year of construction 2018 - Outer dimensions: Width: 305cm Depth: 115cm

Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: The mill was a demonstration unit equipped without a control system. -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Ejection: Height adjustable -Inlet cross-section: mm -Rotor width: mm -Rotor diameter: mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1730/220/H3200 mm -Transport dimensions: 1370/220/H1730, 1400/800/H1470 mm -Weight: 1900 kg

Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: Mill is unused -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Inlet: Ø 400 mm -Ejection: Height adjustable -Rotor width: mm -Rotor diameter: mm -Number: 3 hammer mills available -Price: per piece -Dimensions: 1160/2335/H1550 mm -Weight: 2100 kg

A complete Winema CNC rotary transfer production line including interlinking, peripherals and a washing system is available. 1) Winema RV20 Flexmaster rotary transfer machining center, stations: 6, machining positions: 12, max. material passage: 42mm, internal thread 1: M16x1.5, internal thread 2: M20x1.5, holes: 8.7mm/15mm/17mm/18mm, reaming: 9mm/15mm/18mm, cycle time: approx. 7s, throughput capacity: approx. 500parts/h, control system: Siemens Sinumerik 840D. 2) Winema bar loading magazine, tube support: 800mm, max. tube thickness: 2mm, max. bar length: 3200mm. 3) Knoll Turbofilter coolant cleaning system, dirty tank volume: 500l, clean tank volume: 150l, filter fineness: 50mm. 4) Knoll cooling unit, cooling capacity: 15kW, max. oil temperature: 30°C. 5) UAS oil mist extraction system, separation efficiency: 96%-98%. 6) Interlinked continuous washing system with automatic parts transf ...

Two identical Loos steam boiler systems with Weishaupt burners are available. 1) 2x Loos International U-HD 1250 steam boilers, year of manufacture: 2003, max. operating pressure: 10bar, steam output: 1100kg/h, total volume: 1365l. 2) 2x Weishaupt G7/1-D ZD-LN gas burners, year of manufacture: 2003, category: I2ELL, gas type: N, output range: 250kW-1550kW, min./max. connection pressure: 15mbar/500mbar. Both systems including condensate collector and accessories. An on-site inspection is possible. Expected to be available starting 2027.

A pure steam generator from the manufacturer Apparatebau Wärmetechnik GmbH, which was distributed by Spirax Sarco, is for sale with a condensate collector. Heat output: 446kW, max. operating pressure in the tubes/around the tubes: 13bar/6bar, operating temperature min./max.: -10°C/200°C, volume in the tubes/around the tubes: 33l/621l, medium in the tubes/around the tubes: saturated steam/steam. Documentation available. An on-site inspection is possible.

Key data: 1600 KW, 2000 kVA, 450 V

Surplus/Never Used/Never Installed Power Plant with Six (6) Wartsila 9L20, 1600 kW, (Each), Four (4) MAN-Doosan 6L27/38 1,980 kW (each), 450v. 60 Hz. 900 RPM and Six (6) Wartsila 6L20, 450v. 60 Hz. 900 RPM Marine -Diesel Generator Sets. Complete HFO-Diesel 22.7 MW Power Plant with all their respective auxiliaries and BOP, 450v. 60 Hz. These units can burn Diesel, Gas Oil, Marine Gas Oils (MGO), Marine Diesel Oil (MDO). Year of Manufacturing of this power plant is 2008 and 2012.

Key data: 875 KW, 1094 kVA, 450 V

Surplus/Never Used/Never Installed Power Plant Six (6) Wartsila 6L20, 875kW, 450v. 900 RPM, Four (4) MAN-Doosan 6L27/38 1,980 kW (each), 690v. 60 Hz. 720 RPM and Six (6) Wartsila 9L20, 1600 kW (each), 450v. 60 Hz. 900 RPM Marine -Diesel Generator Sets Complete HFO-Diesel 22.7 MW Power Plant with all their respective auxiliaries and BOP, 450v./690v. 60 Hz. These units can burn Diesel, Gas Oil, Marine Gas Oils (MGO), Marine Diesel Oil (MDO). Year of Manufacturing of this power plant is 2008 and 2012.

This 3-axis WEMAS VZ 1250 Quick was manufactured in 2013. It features a Heidenhain TNC 620 control system, ensuring precision and reliability in operations. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 1250 Quick vertical machining centre we have for sale. Contact us for further details.

General SKU244Y171 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor11 KW Inlet diameter22 mm Specified Features - Basket centrifuge Basket centrifugecheck Closed basketDuplex 2205 Capacity100 dm³ Basket sizesø 800 x 400 mm Max. loading weight125 kg Hydraulic operatedcheck Liquid outletDN100 With hydraulic unitHydra power Motor1,50 kW, 400 V, 1445 rpm With variable speed drivecheck Max. basket speed2600 rpm Max. temperature0° / 80 °C MaterialStainless steel 1.4404 (316L) Information MakeRiera Nadeu Serial10590/P19/00726 Type200D 800 x 400 PI Year of construction2020 Mounted on foundation platecheck With switchgearcheck Floorspace2,60x1,30 m Total height2,00 m Weight3400 kg Extra Specifications Maximum centrifuge factor: 3,000 g : Pressure casing: 0 / 40 mbar : Maximum allowable specific weight: 1,250 kg/m³ : Control system: ...

This 3-axis KUNZMANN WF9 CNC was manufactured in 1999. It features a reliable Heidenhain TNC 410M control system, ensuring precision and efficiency in operations. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF9 CNC vertical machining centre we have for sale. Contact us for further details.

General SKU431U1385 LocationBarneveld CEcheck MakePfaudler-werke TypeBE 8000 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume8000 Ltr. Motor15 KW Specified Features - Glass-lined Reactor MaterialGlass - Enamel (WWG-9115) Glass Reactors Reactorcheck Capacity8000 l (bruto 9367 l) Vessel sizesø 2200 x 2400 mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connectionscheck OutletDN150 With jacketcheck Volume 800 l., allowable temp -25°C/+200°C Max. temperature-25°C/+200°C With propellor stirrercheck Motor15 kW (400 V, 1450 rpm, (Ex)) Speed mixing shaft290 rpm Information No.124971 Year of construction1999 Floorspace2,70 x 2,70 m Total height4,64 m Weight8700 kg ATEX compatiblecheckCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCos ...

This 3-axis WEMAS VZ 860 was manufactured in 2014. It features an internal coolant supply and is equipped with a Heidenhain TNC 530 i control system, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 860 vertical machining centre we have for sale. Contact us for further details.

General SKU082Z322 LocationBarneveld MakeWerner & Pfleiderer, Stuttgart TypeUK-14 X/AU No.154 576 Pressure Working pressure6 Bar Main Features MaterialMild steel Volume200 Ltr. Motor17.5 KW Specified Features - Z-blade mixer MaterialMild steel Z-blade mixers Jacketcheck Max. temperature220 Degr. C. Screw speed20/40 Rpm Arm speed27/20 Rpm (front/back) Capacity250 Ltr, Useful 200 Ltr Double shaft kneaderMixtruder (1x) Masticator-armscheck Trough sizes740x685mm With covercheck With screw dischargecheck Motor30,0 KW, 380 Volt Motor11,0/17,5 KW, 380 Volt Information Year of constructionunknown With switchgear(Dim. 80x40x180 CM) Floorspacekneader 2,8x1,4 M Total height1,6 M Weight3200 KG Extra Specifications- Dimensions drive unit 1,4x1,0x1,7 M (LxWxH), weight 2130 KG Technical specs Extra informationtest pressure is achieved at 220 Degr. C.DiscountZ-blade m ...

General SKU323S571 MakePfaubler LocationBarneveld TypeAE 2500 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume2500 Ltr. Motor11 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity3515 Ltr. (nett. 2500 Ltr.) Vessel sizesdia. 1600x1600 mm Dished bottomcheck Dished top sidecheck Manholecheck Top connectionsDN100 (5x), DN200 (2x) OutletDN100 With jacketcheck Max. temperature-25/200 degr. C With propellor stirrercheck Motor11 kW 220/380 Volt Glass Reactors MaterialGlass - Enamel (WWG) Information No.50718 Year of construction1990 Floorspace2,2 x 2,2 m Total height3,6 m Weight4330 kg Extra Specifications- non water soluble film on the wall (deposit can be removed by hand)Catalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricant ...

General SKU204W048 LocationBarneveld CEcheck MakePfaudler-Werke TypeAE100 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume138 Ltr. Motor1.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity138 l, (100 l. Vessel sizesDia. 800x500 mm Dished bottomcheck Dished top sidecheck Top connectionscheck Outletcheck With jacketVolume 43 l. Max. temperature-25°C/+200°C With propellor stirrercheck Motor1,5kW, 400V, 1405rpm (EX) Glass Reactors MaterialGlass - Enamel (PPG) Information No.74687 Year of construction2007 Floorspace1,0x1,0 m Total height2,0 m Weight700 kg Extra Specifications- pneumatic glass-lined outlet valve includedCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIGl ...

General SKU204W036 MakePfaudler-Werke LocationBarneveld CEcheck TypeAE100 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume100 Ltr. Motor1.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity138 l., (netto 100 l.) Vessel sizesDia. 500x931 mm Dished bottomcheck Top connectionscheck OutletDN80 With jacketcheck Volume 43 l. Max. temperature-25°C/+200°C With propellor stirrercheck Motor1,5 kW, 400 volt, 1415 rpm, (Ex) Speed mixing shaft224rpm Glass Reactors MaterialGlass - Enamel (PPG) Information No.74686 Year of construction2007 Mounted on legscheck Floorspace0,80x0,80 m Total height2,0 m Weight700 kg Extra Specifications- pneumatic glass-lined outlet valve includedCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubrican ...