w 100a used for sale

Key data: 18 KW, 22 kVA, 400 V

22 kVA FG Wilson with Perkins motor in soundproof enclosure in good condition. Specifications: Brand: FG Wilson / Perkins Type: P22 Power: 22kVA / 16kW Year of manufacture: 2011 400/230 Volt Phase: 3 50Hz 8000 operating hours Weight: 728 kg Video of running motor available upon request.

Inv. Num. : 9154 Type: 17-10 FP NC/5 Producer: Waldrich Coburg Created: 1985, GO 2011 Parameters: Operating system: Sinumerik 840 Table length: 5000 mm Table width: 2500 mm Max. workpiece weight: 60000 kg Weight: 125000 kg Coolant leaks out in the spindle area of the machine. GOs were carried out on the machine in 1997/2008/2011.

- 1e owner machine - ca 16.000 Spil hours - Chip conveyor - Under power 

SERVO CONVENTIONAL LATHE WEILER " C 30" With 2 axes Siemens Sinumerik 802 C with WEILER Software C 1 Year of Make: 2002 Spindle bore: 42 mm Center width: 750 mm Circumference Ø over bed : 330 mm Speed range: 1 – 4500 rpm With the following accessories: Multifix Tool Holder Feed protection 3 jaw chuck RÖHM 0 160 mm 2 set of hard top jaws Collet device 3 centering tips Chip drip tray Chip backsplash wall with lighting Coolant Setup 10 Height Adjustable Machine Shoes Operating instructions THE MACHINE IS IN VERY GOOD CONDITION

Including:, Lachnit lifter for dolav, Type: 300S, Serial number: 2208, Year of construction: 2006, Load: max 1000 kg, Container: max 1100 x 1200 x 850 mm, Lifting height: 2400 mm left, 2300 mm right, Power: 3 x 400V, 50Hz, 3kW, Dimensions: 2500 x 2200 x 5000 mm, Stainless steel platform, Dimensions: 2400 x 1600 x 2500 mm, Including BES (Bone Elimination System), Hole plate diameter: 250 mm, Power: 3 x 400V, 50Hz, 55kW, Dimensions: 2300 x 1400 x 2450 mm, Weight: 1250 kg

Offered is a universal knee-type milling machine. Working area X/Y/Z: approx. 710mm/250mm/430mm, table clamping surface: 1250mm/315mm, spindle mount: ISO 40, speed range: 45-2000rpm (18 steps), feed rate: 10-1000mm/min, rapid traverse: available, control: conventional with electrical program control (PFAFF panel). Equipped with horizontal milling spindle, manual support bracket for long milling arbors, hydraulic pressure accumulator system, coolant device, chip collection tray, central lubrication. Weight: approx. 2100kg, overall dimensions X/Y/Z: approx. 1950mm/1750mm/1850mm. Inspection possible by arrangement.

Rated current: 22A, connected load: 15kVA, with extensive accessories, the machine is fully functional. An on-site inspection is possible.

turning diameter: 256 mm turning length: 530 mm control: Fanuc 31i-A turning diameter over bed: 550 mm turning diameter over cross slideways: 350 mm main spindle:: max. turning speeds: 6000 min/-1 Drive power - main spindle: 11 kW max. torque: Nm max. rod diameter: 45 mm spindle head: A2-5 chucking diameter: mm tool turret:: shaft height for square tool: 25 mm Drill shank diameter: 50 mm travel:: x-axis: 210 mm z-axis: 560 mm feeds:: rapid traverse: x 20 / z 24 m/min total power requirement: kW weight of the machine ca.: 7,7 t dimensions of the machine ca.: L 4,18 x B 2,01 x H 1,98 m Technical Specifications: - Manufactured in 2017 but not put into operation until 2021 - Fanuc 31i mod A CNC control - Y-axis - 20 bar tool cooling - Fedek bar loader - Chip conveyor - 12-station tool turret - 10 rotating tools The data for this ad was created with ModulMWS - the software solution o ...

Number of boring spindles: 8 St. Working width: 230 mm Working height: 160 mm Feed motor: 5,5 kW Feed speed: 36 m/min. Control: Logocom Planing and moulder Weinig Unimat 3000 Brillant. Computer-controlled ProfiCenter for planing and profiling work with CNC-controlled spindles and loading magazine Weinig EM11. The control panel was equipped with the current Simatic Panel PC677C-15 in 2021. The sale takes place on behalf of the customer ex works. A viewing is possible at any time by arrangement. Spindle 1: Bottom / HSK Powerlock / 12,000 rpm Spindle 2: Right / HSK Powerlock / 4,000 - 12,000 rpm Spindle 3: Left / HSK Powerlock / 4,000 - 12,000 rpm Spindle 4: Right / HSK Powerlock / 4,000 - 12,000 rpm Spindle 5: Top / HSK Powerlock / 4,000 - 12,000 rpm Spindle 6: Bottom / HSK Powerlock / 4,000 - 12,000 rpm Spindle 7: Top / HSK Powerlock / 4,000 - 12,000 rpm Spindle 8: Bottom / HSK Powerlock  ...

turning diameter over bed: 500 mm turning diameter over slide rest: 330 mm turning diameter in the gap: 600 mm turning length: 3000 mm bed width: 505 mm spindle bore: 72 mm spindle head: DIN 55022 Gr. 8 taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/min power requirement: 18,5 kW dimensions: 5,3 x 1,75 x 1,53 m weight of the machine ca.: 5,2 t used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix C toolholder system - some toolholders - steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 400 mm centre distance: 3.000 mm max. swing over bed: 810 mm max. swing over facing slide: 510 mm max. swing-dia. in gap: 850 mm control: WEILER max. workpiece weight: 3.800 kg spindle diameter in front bearing: 150 mm spindle bore: 106 mm faceplate diameter: 630 mm worktool system: Parat tailstock quill taper MT: 6 dia. of quill: 115 mm spindle turning speed - stepless: 1 - 1.800 U/min Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. A comprehensive tool package is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition and can be inspected under power at any time. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - -  ...

Packing metal tins in 4-point trays or wrap-around cartons,, configured for two-piece aluminum cans or three-piece tinplate cans,, Machine description, - Feeding of single-track incoming metal cans, rotation of the cans, transfer to the line distributor, - Distribution of metal cans from one to up to four lanes, - Grouping of the cans in the specified formation, - Capture, translate and place the can formation in wrap-around or 4-point trays, - Processing and feeding of tray scraps, - Separation of parts and placement in chain transport, - Labeling and sealing of the filled cartons, - Transport of finished packaging units via a belt and roller conveyor, consisting of: hinge plate conveyor belt length: approx. 1500 mm, 180° turner for 125 g can, Murtfeldt brand, line distributor for the cans to be packaged, formation is transferred onto the opened tray using a suction bar, currently conf ...

WEILER Praktikant 140 B lathe YOM 1991, Serial No. 91-2735 With 3-axis digital readout Heidenhain Centre height 140 mm Swing over bed 280 mm Swing over support 158 mm Centre distance 650 mm Spindle hole 40 mm Spindle speeds 24 to 2500 rpm Tailstock Pinole Ø 40 mm Taper MK 3 Stroke Pinole 85 mm Feeds from 0.02 to 0.63 mm/rev Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible Metric thread pitches from 0.25 to 8 mm Weight approx. 680 kg Accessories: -set of collets -knife holders -x2 jaw-chucks -others The machine has only been used in Germany. Very quiet drives, excellent condition

Belt sander manufactured in 2010. This WEBER KSF-3-1350 features three sanding belts for high-quality fine, veneer, and high-gloss sanding. It has a constant working height of 900 mm and a continuously variable feed speed of 3-18 m/min. If you are looking to get high-quality sanding capabilities, consider the WEBER KSF-3-1350 machine we have for sale. Contact us for further details regarding this machine.

CONTROLS   CNC controls FANUC 32I-MODEL B - MANUAL GUIDE I BASIC FUNCTIONS   number of spindles: 1   number of turrets: 1   live positions: yes WORKING RANGE TURNING   turning diameter (max): 530 mm   bar diameter (max): 117 mm   worpiece length max.: 500 mm MAIN SPINDLE   spindle revolutions (max): 2000 /min   drive power: 37 kW   spindle torque: 3073 Nm X/Z SLIDE   number of tool positions (total): 12   number of live positions: 12   - rotation speeds (max): 4000 /min   - drive power: 7.5 kW ATTACHMENTS (TURNING)   chip conveyor: yes • Programmable tailstock MK#5 • Main spindle with 2-stage gearbox • Tooleye • Chip conveyor • High-pressure pump, 20 bar • 3-jaw chuck, diameter 380 mm • Tool breakage monitoring • Programme memory expansion • Programmable clamping pressure

Offered is a 3D coordinate measuring machine. Working area X/Y/Z: 850mm/1200mm/600mm, probe holder: Renishaw PH10M, table surface: granite plate, resolution: 0.1µm, air supply: 5bar, control: Zeiss CMM Controller. Equipped with control panel with joystick, SCR200 probe change magazine, calibration sphere, extensive probe accessories. Weight: approx. 2400kg, overall dimensions X/Y/Z: approx. 2100mm/1900mm/2350mm. Inspection possible by arrangement.

max. workpiece length: 3.800 mm profile spindle: 1 Stück main drive: 15 kW Control: Maestro active windoor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. no.: 18625 Manufacturer: WITTMANN BATTENFELD Year of construction: 2011 Clamping unit Clamping force: 110 ton Opening stroke: 380 mm Distance between tie bars: 470 x 420 mm Mould height min.: 200 mm Mould height max.: 450 mm Platen size (h x v): 680 x 663 mm Injection unit Screw diameter: 30 mm Injection volume: 88 cm³ Shot weight: 80 g Injection pressure: 1471 bar Measurements and weight Dimensions: 4,8 x 1,4 x 2,2 m Machine weight: 4600 kg Further information: Wittmann Battenfeld EcoPower series represents high-efficiency all-electric injection moulding technology designed for precision production and stable processing performance. All major machine movements are driven by servo electric motors. Injection, dosing, clamping and ejector movements are performed completely electrically, ensuring extremely precise motion control, excellent repeatability and stable production quality.  ...

Machine name: Used decanters Manufacturer: GEA Westfalia Type: SD0815 Year of Make: 2000 Max. drum speed: 3,000 RPM Inner diameter drum: 500 / 245 mm Njwjy Ui A Rs Rxtpqoct Inner drum length: 1,466 mm Material: Stainless Steel Dimensions: L 3,045 x W 1,100 x H 1,695 mm Curb weight: 2800 kg Tech. Documentation: Yes Accessories: A control cabinet Note: The used industrial decanter was inspected annually, the drum was pulled every two years. Condition: Used Price: On request

Separator Bactofuge GEA Westfalia CSI 230 1734-326 Working Hours 14,000 Year of Construction 2014 Still installed in the factory, Schedulued for Dismantling June 2026 Includes Control Panel, Tools, Technical Documentations and Instruction Manuals Requires Regular Maintenance Due to 9 Years of standing out of operations, as on the pictures After technical maintenance it is destined to work for you another 30-40 years We deliver worldwide or Collection by your forwarding company after full payment Commissioning in your location possible after agreement at extra cost

Maximum Spindle Speed 2800 RPM Brand Weiler Power Source Electric Control Type Conventional Machine Weight (kg) 800 Chamfer Triple Model/Type VS1 Year of Manufacture 1979

Manufacturer: Winter Model: VSP 350 Year of Manufacture: 2014 72015 Type of Machine :Column press Technical Specifications : - Plunger force can withstand 3500 kN - Maintain 50 mm plunger stroke - Piston force: 2500 kN - Piston stroke: 100 mm - Installation height of plunger at the top: 553 mm - Distance between columns 570 mm - Table-type pestle surface WD 392238 mm - Table height approx. 1100 mm - Overall height approx. 3250 mm - Overall width approx. 1290 mm - Total depth approx. 860 mm - Machine weight without oil: approx. 13000 kg - Oil filling DIN 51524-HLP 46 1150 l - Maintain working speed of 500 kN at approximately 30 mm/s - Maintain working speed of 3500 kN at approximately 4 mm/s - Maintain return stroke speed of approximately 60 mm/s - Working speed for cutting: 500 kN approx. 30 mm/s - Working speed for cutting: 2500 kN approx. 5 mm/s - Return stroke speed: approximatel ...

Offered is a conventional cylindrical grinding machine. Set to ZRO 40.10, protection class: IP54/IP32, control system: Erfurt electronic. Equipped with integrated control cabinet, workpiece feed system, separate control panel, coolant system. Weight: approx. 380kg, overall dimensions X/Y/Z: approx. 2500mm/1800mm/2000mm. Inspection possible by arrangement.

PETER WOLTERS AC1200-P Double-sided polishing machine Working hours: 14713 2016 vintage PETER WOLTERS AC 1200F Grinding machine Copper pipe leaking Spare parts for copper pipe Working hours: 2024 2017 vintage PETER WOLTERS AC1200-P Polishing machine Water pressure sensor currently nonfunctional Working hours: 10041 2017 vintage PETER WOLTERS AC 1200F Grinding machine Working hours: 5625 Cooling board currently nonfunctional 2016 vintage (4) units of Peter Wolters AC 1200 systems (2 polishers, 2 grinders), but the seller is coming down on price and I wanted to make you aware of the discount as these are going to be the cheapest AC 1200's we've ever sold. All of the machines are complete and still installed at the seller’s site, but they no longer need these in their process, so they are available for immediate release at a discounted price to facilitate a ...

Key data: 2

Wigo Copy Milling Machine Type: 1075 1 milling motor each on the right and left 5.5 kW each Spindle diameter 30 mm Milling spindles run in the same and counter-rotation Running direction can be switched Milling process via scanning with thrust ring Working length max. 1400 mm Working width max. 210 mm Working height max. 90 mm 2 pneumatic clamping cylinders from above 2 x pneumatic side pressure with 2 straight milling heads milling height 50 mm Dimensions Length 3200 mm x W 1200 mm x H 1600 mm Weight approx: 1000 kg

K+S Control GTK 150K Switchgear and control system built in 2012 von Kuntschar und Schlüter (Wolf) GTK 150 K. 400 / 231 V / 50 Hz, 315 A Manufacturer: K+S (Wolf) Model: from GTK 150 K Type: Switchgear and control system Serial Number: 822 Voltage [V]: 400 / 231 Current [A]: 315 Frequency [Hz]: 50 Year of Make: 2012 Weight [kg]: 330 Dimensions LxWxH [m]: 2.20 x 1.60 x 0.50

Dough divider / head machine W&P, type: MU-S6 -Refurbished- - The weight range with the current warp knitting roller is 28 - 95 grams - Other warp knitting rollers with other weights available - Weight range: currently 28 - 95g - El. Connection: 50 Hz, 400 V, 9 / 16 A - Capacity: max. 12,000 pcs./h - Condition: Very good, overhauled from the ground up - Warranty: 6 months worldwide Visits and test runs are possible.

Offered is a hydraulic four-column press. Column spacing: 570mm, table size: 392 × 238mm, ram force (holding): 3500kN, ram stroke (holding): 50mm, ram force (separating): 2500kN, ram stroke (separating): 100mm, installation height: 553mm, cutting impact stroke: 20mm, working speed: max. 30mm/s, control: PLC. Equipped with pump unit, oil cooler (3kW), dust protection for upper cylinder. Weight: approx. 13000kg, overall dimensions X/Y/Z: approx. 1290mm/860mm/3250mm. Inspection possible by arrangement.

number of spindles: 6 working width: 230 mm planing height: 160 mm Control: ATS Driven table rollers: 1 feed: 24 m/min feed motor: 4 kW Length of the planing table: 2.500 mm Weinig Unimat 23 automatic planer and moulder for four-sided planing and profiling of timber with ATS system, reinforced Kaschwig shuttering protection cabin and universal spindle. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 650 mm material thickness: 0,8 - 5 mm Feed speed: 8 m/min. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Settling machine for setting down the tooth backs of circular saw blades; completely overhauled and repainted

pressure: 250 t throat: 360 mm table-size: 1.250 x 630 mm table diameter: 250 mm dimension of ram: 850 x 450 mm dayligth: 800 mm piston stroke: bis 500 mm diameter of piston: 400/360 mm ram stroke speed: abwärts 200 mm/sec ram stroke speed: aufwärts 110 mm/sec total power requirement: 20,5 kW weight of the machine ca.: 8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 420 KW, 400 V

Kuntschar und Schlüter (Wolf) Gas CHP GTK 382K Gas electricity and heat generators from 2013, 64,000 operating hours, with control, cooling and two silencers. Engine in need of overhaul. 382 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: MarelliGenerators MJB 355MA4-B, 680 KVA Manufacturer: Kuntschar and Schlüter (Wolf) Model: GTK 382K Type: Gas CHP Serial Number: 0094 Power [KWel]: 382 Engine: MAN E2842LE322 Engine power [KW]: 420 Year of Make: 2010 Hours: 64,000 MarelliGenerators MJB 355MA4-B AC Generator Manufacturer: MarelliGenerators Model No.: MJB 355MA4-B Type: AC Synchronous Generator Serial Number: MJB3532L014M0 Power [KVA]: 680 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 981 Speed [1/min]: 1,500 Year of Make: 2013 Weight [kg]: 1.780

pressure: 250 t throat: 360 mm table-size: 1.250 x 630 mm table diameter: 250 mm dimension of ram: 850 x 450 mm dayligth: 800 mm piston stroke: bis 500 mm diameter of piston: 400/360 mm ram stroke speed: abwärts 200 mm/sec ram stroke speed: aufwärts 110 mm/sec total power requirement: 20,5 kW weight of the machine ca.: 8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

-Hamlet -E50/1 -No.: 474 -Year: 1996 -Operating hours: approx. 22,400 -Voest-Alpine Steinel control (whereby the control is probably via sep. desktop PC) -Incl. chip conveyor, various tool holders and tools Shipping available on request. Sale only to tradespeople. Indicated purchase price = Net plus 19% VAT = €9,282.00 Gross

This 3-axis Wenzel LH 87 CMM machine was manufactured in 2014. It features a measuring range of 800 mm in X, 1000 mm in Y, and 700 mm in Z, with a maximum component weight capacity of 800 kg. The machine is equipped with an air-bearing system across all axes and a Renishaw PH10M Plus motorized indexing probe head. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH 87 CMM machine we have for sale. Contact us for further details.

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 97 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c4-4-w23-46131 70-new/42380, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 615 kg, Type number: C4.4 W23-4613170

Number of boring spindles: 5 St. Working width: 230 mm Working height: 120 mm Universal planer and moulder Weinig Profimat 23 for four-sided planing and profiling of timber. Including saw package for ripping timber with the 4th and 5th spindle. Spindle 1: Bottom / 5.5 kW / 40 mm Spindle 2: Right / 5.5 kW / 40 mm Spindle 3: Left / shared motor with #2 / 40 mm Spindle 4: Top / 7.5 kW / 40 mm Spindle 5: Bottom / 4 kW / 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 10 , 240 mm

Four-sided planer Weinig Type: Unimat 23 / U 23 Year of manufacture 1994 CE Planing width 240 mm Planing height 160 mm (240 mm universal shaft) With 2 universal shafts 360° clamping length 240 mm Length of dressing table 2350 mm 10 planing shafts Arrangement of planing shafts and table rollers 1.Shaft bottom 7.5kw smooth driven roller in the table 2nd shaft right 7.5 kW 3rd shaft left 7.5 kW 4th shaft right 7.5 kW smooth driven roller in the table 5.Shaft top 7.5 kW 6.Shaft bottom 7.5kw smooth driven roller in the table 7.Shaft top 7.5 kW 8.Shaft bottom 7.5kw smooth driven roller in the table 9.Shaft Universal u, right, li, o 360° 7.5 kW smooth driven roller in the table 10.Shaft Universal u, right, li, o 360° 7.5 kW Smooth driven pull-out roller in the table Spindle diameter 40 mm Cardan feed, feed motor 8.6 kW Feed speed 6 – 36 m/min. Electric he ...

Coordinate grinding machine Hauser 3 SM BJ 1996 Surface Grinding Machine Okamoto BJ 1996 Cylindrical Grinding Machine White W11 BJ 2009

Magnetic clamping plate dimensions: 400x800mm, with circuit diagrams in digital format. An on-site inspection is possible.

Suitable for: screw caps, drop inserts, press-on caps, flip-top caps, cup-to-cup closures, pipettes, brushes, spray pumps, triggers, rubber stoppers, crimp caps, ROPP caps and other closure types, equipment: mechanical rotary indexing table, pneumatic cap feeders, closing station for 1 closure type, extraction connection, IBC including drip tray, continuously adjustable transition from the discharge arm, machine enclosure: stainless steel 1.4301 (AISI 304), max. output depending on bottle, fill level and closure type: 60 bottles/min, compressed air connection filtered, oil-free: 6bar, connected load: 1.5kW, power supply: 3x 400V, connection area height: 792mm, cable routing: 317mm, overall length: 4200mm, with documentation. An on-site inspection is possible.

: 30000 kg length: 9000 mm width: 2500 mm height: 810 mm : lenkbar : lenkbar size of tyres: 410 x 250 / 8-fach weight of the machine ca.: 4,3 t dimensions: 11,5 x 2,5 x 0,81 m Heavy duty trailer with - Double turntable steering - small turning circle - Tilt-proof due to steering lock limitation - Reversible drawbar, Length 1320mm - good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 30000 kg length: 9000 mm width: 2500 mm height: 810 mm : lenkbar : lenkbar size of tyres: 410 x 250 / 8-fach weight of the machine ca.: 4,3 t dimensions: 11,5 x 2,5 x 0,81 m Heavy duty trailer with - Double turntable steering - small turning circle - Tilt-proof due to steering lock limitation - Reversible drawbar, Length 1320mm - good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 480 mm turning diameter over slide rest: 260 mm turning length: 1500 mm turning diameter in the gap: - mm turning speeds: 90 - 1120 U/min centre height: 240 mm spindle bore: 52 mm total power requirement: 7,5 KW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 3,0 x 1,3 x 1,5 m Engine Lathe - 3-jaw chuck (200 mm) - Quick-change tool post - Steady rest - Machine lamp - Chip tray - Center point The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pallet circulation system for the production of Twin-Wall Panels and Filigree Floor Slabs comprising: 56 pallets; length = 10.00 m, width = 3.00 m Longitudinal and transverse transport systems for the pallets Stacker crane for storing and retrieving the pallets Curing chamber with 50 storage spaces 1 tilting station at the demoulding station Stacking areas with transfer trolleys Transfer trolleys for horizontal and vertical precast elements Automatic concrete distributor (built in 2018) Turning device for the production of double walls Beckhoff control system 2 laser plotters, from Z-Laser Steel processing PROGRESS: Straightening and cutting system, Progress MSR2/16 with positioning device for the steel of a complete pallet – plotter by Z-Laser Lattice girder cutting system for wall girders Spare parts for electrical/control systems, spare parts for mechanical c ...

General SKU284Y448 MakeVan Wijk & Boerma TypeNM011BH02S12F Mach.No.218768 Main Features MaterialStainless steel Volume360 Ltr. Motor0.37 KW Specified Features - Eccentric Screw Pump Capacity360 l/h With motor0,37 kW 230/400 V Inlet2x ø 23 mm Outletø 6 mm Eccentric Screw Pumps MaterialStainless steel 1.4552 Information LocationBarneveld Floorspace0,2 x 0,8 m Total height0,25 m Weight50Eccentric Screw PumpsVan Wijk & BoermaPumps > Eccentric Screw PumpsBrand > Van Wijk & Boerma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU284Y450 MakeVan Wijk & Boerma Type2NL 15A Mach.No.241596 Main Features MaterialStainless steel Motor0.37 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Without motor± 0,37—1,1 kW Inletø 23 mm Outletø 23 mm Eccentric Screw Pumps MaterialStainless steel 1.4306 (304L), Stainless steel 1.4571 (316Ti) Information Year of construction1992 Mounted on framecheck LocationBarneveld Mounted on wheelscheck With switchcheck Floorspace1,5 x 0,5 k Total height0,75 m Weight60Eccentric Screw PumpsVan Wijk & BoermaPumps > Eccentric Screw PumpsBrand > Van Wijk & Boerma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more mach ...

General SKU249Y202 LocationBarneveld CEcheck MakeLancer Pressure Working pressure8 Bar Main Features MaterialStainless steel Volume2197 Ltr. Pressure8 Bar Specified Features - Autoclave Horizontal autoclavecheck Capacity2197 l. Internal width1300 mm Internal depth1300 mm Internal height1300 mm Inlet/Outlet2x 1325 x 1480 mm With trayscheck Max. temperature95 °C Electric capacity17,5 kW 400 V With transport trolleycheck MaterialStainless steel 1.4435 (316L) Information Type4800 PRO DP SS No.34020017 With switchgearcheck Siemens Floorspace2,76 x 1,64 m Total height2,76 m Extra SpecificationsWith air heater/drying unitAutoclavesLancerAutoclaves > AutoclavesBrand > Lancer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the mac ...