w 100a used for sale

Robot type : W643 – 269 Control N° : CNC 6 – 2617 Year : 2004 Removal X – Axis : 1200 mm SER Standard Vertical Y – Axis : 2600 mm SER Standard Horizontal Z – Axis : 4500 mm SER Standard Placing C – Axis : 60NM-P 90 Rotation A – Axis : No Rotation B – Axis : 15,0NM-MOT 0-270

Deck oven W&P, type: Matador -In very good condition- - Number of stoves: 5 - Baking surface: 15 m² - Lower both stoves extendable - Burner: gas or oil as desired - Very good condition, everything technically checked, ready for immediate use Visits and test runs are possible by arrangement. Delivery and assembly on request. Overhaul possible.

grinding diameter: 100 mm grinding length: 400 mm centre height: 100 mm z-axis: 425 mm table speed -stepless-: 0,05 - 5,00 m/min workpiece spindle head rotation speed: 90 - 1.000 U / min. grinding head swivelling: -2 - +30 Grad tailstock quill taper MT: 3 grinding wheel speeds: 1.800 / 2.000 U/min grinding motor: 3,70 kW dimensions of grinding wheel: 350 x 50 x 127 mm total power requirement: 7,00 kW weight of the machine ca.: 2,50 t dimensions of the machine ca.: 3,00 x 2,50 x H2,20 m With 2-axis digital display FAGOR, coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal turning machine manufactured in 1999. This Weiler E35 D features a Siemens Sinumerik 810D control with Weiler D1 user software and a 12.1-inch TFT color flat screen. It includes a coolant unit with a flow rate of 30 l/min and a tool holder for quick-change operations. If you are looking to get high-quality turning capabilities, consider the Weiler E35 D machine we have for sale. Contact us for further details.

turning diameter: 400 mm turning length: 1000 mm swing diameter over bed slide: 400 mm turning diameter over slide: 225 mm bed width: 433 mm spindle bore: 56 mm total power requirement: 7,4 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 2,5 x 0,9 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

abgel. Operating hours: 3120 h, with loading fork

Overview    The Meheen M6 isobarometric filler from the American manufacturer Wild Goose was built in 2020. The machine was used very little.  Technical Details  Capacity: Up to 2.160 bottles per hour   Number of filling heads: 6   Last used formats: 0,33l Longneck   Possible bottle diameter: 5.3 cm - 7.6 cm  Dimensions (Floor): 1680 mm x 1070mm 

Plunger Pump, High Pressure Pump, Homogenizer, Plumger Piston Pump, Plunger Piston Pump Manufacturer: WOMA Apparatebau GmbH Type: 753.50 max pressure 150 bar Flow rate approx. 175 l/min Engine Power: 55 kW 1500 rpm 380/660 volts 50 Hz Dimensions approx. 1800 x 1000 x 750 mm Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Filling Machine Manufacturer: Würschum Type VH 150 Volume Minimum 3 ml Maximum 150 ml Manual filling machine for pastes and creams

Weinig Profimat 23 ATS four-sided planer Working width 230mm Working height 120mm Number of spindles 4 Spindle layout: 11kw pit Rights Left 11kw Top 11kw Pneumatic Material Clamps Feed speed adjustable 5-22m/min Input table length 2470mm 4kw feed motor CE Certificate Lashing diameter 4x140mm Net price

Manufacturer: Müller-Weingarten Type: Double column drawing press Press force: 400 tonnes Working area: 1,600 x 1,300 x 1,400 mm Year of Manufacture: 1963 Find more here - / Contact us at -

Manufacturer: Wenzel Type: RS 1012 / CNC Year of Manufacture: 2003 Type: CNC Coordinate Measuring Machine Measuring Volume - X-axis measuring range: 2,000 mm - Y-axis measuring range: 1,000 mm - Z-axis measuring range: 1,200 mm Measurement Accuracy - Maximum permissible length measurement error (MPE): 15.0 micrometres + (L / 45.0 mm) micrometres - Maximum overall: 50.0 micrometres (valid across the entire measuring range) Probing System - Probe head: Renishaw PH10 M - Probing system type: Renishaw TP20 - Probing system number: 153R13 Find more here - / Contact us at -

Format Parts Bottle Diameter : 57,71,76,94,115mm

el. cabinet. Documents are available. Capacity: app. 15-20.000 ltr/h Suitable for wine, beer

bottom outlet NW 50 pressure gauge with outlet Optional: various fittings

This 3-axis Wenzel LH87 was manufactured in 2010. It features an X-axis travel of 800 mm, Y-axis travel of 1500 mm, and Z-axis travel of 680 mm, with a maximum table load of 1000 kg. The machine includes a Renishaw probe system and integrated rotary indexing table. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH87 CMM machine we have for sale. Contact us for further details.

CMM machine manufactured in 2003. This JENOPTIK wave C8000 features a measuring height of ±20 mm and a measuring length of 120 mm. It includes a feed unit, a column, and operates on Windows 2000 with Turbo Contur software. The package comes with a PC tower, monitor, keyboard, mouse, printer, granite surface plate, and calibration accessories. If you are looking to get high-quality contour measuring capabilities, consider the JENOPTIK wave C8000 machine we have for sale. Contact us for further details.

Line is consisting of:, Weber slicer, Type: CCS904, Serial number: 7096, Year of construction: 2007, Capacity: 2000 RPM, Slice thickness: 0.5 - 50 mm, Compressed air: 10 Bar, 150 L/min., Power: 3 x 400V, 50Hz, 10 kW, Dimensions: 13400 x 1900 x 2600 mm, Including CCW904 weigher, CCR904 rocker, CCA speedloader and CCU portioning unit, Pago labeler, Type: System 516, Serial number: 212516068, Year of construction: 2012, Mettler Toledo metaldetector and checkweigher, Type: XS3, Serial number: 35000430, Year of construction: 2008, With reject, Bosch Sigpack Systems robot / cartoning line, Type: LDM + TTLi, Serial number: J-01659-LDM-042 / J-01659-TTLi-077, Viewtech optical control, Type: VT2007/010, Serial number: VT2007-DCDCL/057, With reject

General SKU321S566 MakeWLS Gabler (D), Pressquick PQ 12 LocationBarneveld TypeE-60/10 D Main Features Motor3 KW Inlet diameter345 mm L/D3 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter60mm, Screw length 180mm L/D3 With jacketcheck AC-motor3.0 kW, 220/380 Volt With variable speed drivecheck Screw speed9-89 Rpm Inlet345x250mm Feeding with hopper- incl. mixer MaterialStainless steel Information No.12355 Year of constructionUnknown With switchgearcheck Floorspace1.8 x 0.7 M Total height1.35 M Weight560 Kg Extra Specifications: Without die plate Single screw extrudersFood additivesWLS GablerExtruders > Single screw extrudersIndustries > Food & Feed > Food additivesBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination w ...

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 5554; Engine: Perkins 2806A-E18TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1132

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 5033; Engine: Perkins 2506A-E15TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 888

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 2043; Engine: Perkins 1106A-70TAG4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 394

Number of sanding units: 2 st. sanding width: 300 mm Sanding height max.: 300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 semi-hard cheese dairy plant for non-pressed semi-hard cheese such as Tilsiter cheese Moulds and drain tables for approx. 55,000 l of cheese dairy milk per shift are available with 1 cheese curd - whey rotary drum de-whey with 10 curd melting vats, space for a total of 10 cheese curds. 1,150 Performa cheese bread molds

Find more here - / Contact us at -

Hours in Picture The 2003 Weiler E50 is a "Cycle-Controlled" lathe, which sits in the sweet spot between a manual machine and a full-blown CNC. In 2003, this machine was the king of the "one-off" and small-batch production world. Find more here - / Contact us at -

1 rotary Waldner cup filling machine for 95 mm cup diameter Output 4,500 EH per hour, type DOSO 2/2, 2 lanes and with S 7 control at 75mm to 250 gr. at 95 mm to 500 gr. and 1,000 gr. for cups, shaped like a "pot" with control cabinet and various cups suitable filling tools with crate manufacturing machine and 5 m empty-crate transport line Manufacturer Koch, year of construction 2011 with Nordson gluer dismantled

Double-end profiler winter Type RYD 6020 Year of construction 2010/6 Working width approx. 2000 mm Working height approx. 10 – 120 mm Feed speed approx. 6 – 36 m/min. 1 unit per side Motor power approx. 5.5 kW each Feed motor approx. 4 kW Motor width adjustment approx. 0.75 kW Connected load 15.1 kW Weight 4000 kg

Very well preserved, rarely used grinding machine Weinig Tyo RONDAMAT R 980 for planer heads

WITTMANN SPRUE WP80 X-100 Y-700 Z-90

WITTMANN SPRUE WP80 X-100 Y-700 Z-90 ROBOT

Roller diameter 200 mm, coolant device and machine light

Roller diameter 150 mm, coolant device and machine light

Number of boring spindles: 6 St. Working width: 220 mm Working height: 120 mm Length of the planing table: 2.000 mm Feed motor: 5,5 kW Feed speed: 36 m/min. Grooved table: Ja : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wärtsilä 18V34SG Complete Natural gas Power Plant for sale. Hours 46,063 (Service done at 42,658 hrs in sept 2017) Year 2007 Fuel Natural gas Capacity 6 MW Voltage 6000V Frequency: 50 Hz Scope of supply: Complete 6 MW plant with Wärtsilä 18V34SG Genset including Engine, ABB alternator model AMG0900LP08DSE, skid, gas train, 2 radiators, 1 cooling tower with its own electrical panel powered by the service panel, 1 complete service panel with UTIF metering group, power line with IN 250A OUT 50kA, 1 chimney, Wärtsilä electrical panels, HMI control panel, synchronizers, and WECS control Panel. The disassemblable soundproof structure can be made available with a separate assessment . Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com

This 3-axis Werth Scopecheck 300S was manufactured in 2021. It features a measuring range of 300 mm x 200 mm x 200 mm and a resolution of 0.1 µm. The machine includes a multisensor concept with optical, scanning multi-probe, and laser sensor capabilities. If you are looking to get high-quality measurement capabilities, consider the Werth Scopecheck 300S CMM machine we have for sale. Contact us for further details.

turning diameter over bed: 455 mm turning diameter over slide rest: 285 mm turning length: 1.000 mm center height over bed: 225 mm centre distance: 1.000 mm digital readout: 2-Achsen ANILAM bed width: 330 mm spindle taper: KK 6 DIN 55027 spindle bore: 45 mm turning speed range: 16 - 1.000 U/min power requirement: 3,0 / 4,2 kW taper in tailstock-quill: MK 4 dia. of quill: 62 mm quill stroke: 145 mm coolant: voltage: 400 V total power requirement: 4,5 kW weight of the machine ca.: 1,95 t dimensions of the machine ca.: 2,45 x 1,10 x 1,80 m - Serial-No.: 29-2561 - ANILAM 2-axis digital readout - 4-jaw tool holder - coolant equipment ATTENTION! Machine is sold without a chuck. Upon request and for an additional charge, the following 3-jaw spiral chucks can be included: - CENTER Ø 200 mm = 780.00 EUR - CENTER Ø 250 mm = 1,030.00 EUR The data for this ad was created with ModulMWS - the sof ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min. Dimensions (L/W/H): 3900 x 2200 x 2000 mm weight of the machine ca.: 2500 kg Weinig Profimat 23 Four-Sided Planer – Window Version (With glazing bead separation feature, or usable as a grooving spindle) ATS Control and Program Control ------------------------------------- Technical Specifications Summary (Please inquire regarding any additional accessories that may be included) ------------------------------------- General ------------------------------------ > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Infeed table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight (approx.): 2500 kg Spindle Arrangement ---------- ...

spindle diameter: 160 mm x-travel: 9500 mm y-travel: 4000 mm z-travel: 1000 mm w-travel: 700 mm spindle speed:: 2,5-1000 U/min control: Siemens 840 D power capacity: 28 kW spindle taper ISO: 50 dimension of the ram: 340x340 mm Feed: 5000 mm/min rapid traverse: 5 m/min spindle support bearing: Angle head: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The machine was completely overhauled in December 2015The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find fu ...

Number of spindles: 5 St. Working width: 20 - 230 mm Working height: 8 - 120 mm Length of the planing table: 2500 mm Feed motor: 1,1 kW Feed speed: stufenlos regelbar 2-12 m/min. weight of the machine ca.: 2500 kg 1 WEINIG VARIOMAT Planing and Moulding Machine --------------------------------------- Brief Summary: --------------------------------------- - 5 spindles - Powerful motors - Cycle-controlled jointing - MemoryPlus control system - Option: Stähle-Hess Saturn single-piece sanding machine Technical Manufacturers Description: --------------------------------------- Working width: 20 – 230 mm Working height: 8 – 120 mm 1st Spindle: Horizontal Bottom --------------------------------------- Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125 – 145 mm Axial adjustment range: 5 mm Rebating device incl. rebating cutters 2nd Spindle: Vertical Right --- ...

Height=1.57 m, Overall length= 0.82 m, Overall width= 0.82 m, Net weight= 143 kg,

Dough scoop with riser belt also possible for tubing • Dough funnel suitable for approx. 200kg dough • Funnel made entirely of plastic • Top edge hopper approx. 2050mm; Safety light curtains on top of the hopper. Attention: the lifting tipper should be set to at least 2,100mm dump! • Star knife for portioning the dough into Plastic • Oiling of the star knives: incl. • Oil tank: 19 liter stainless steel pressure tank, suitable in order to possibly add funnel lubrication afterwards. supply. • Funnel lubrication can be retrofitted • Horizontal pick-up belt for the dough portions • The dough is divided between two parallel Conveyor belts handed over • Climbing angle of the conveyor belts approx. 70° • The upper band can be moved at a distance to the inlet and run. • The lower band merges into a horizontal piece of ribbon, which leads the dough  ...

Stacker - Belt width 900mm, - Separate frame, with sprinkling or Head machine connected by quick-release fastener - Mobile version - Setting stroke adjustable, suitable for 1 Trays 980 x 580 (occupancy: 10 x 6) ,2 proofing planks 45x65 (occupancy 3 x 5) or 1 tray 58x78 landscape (Beleguing 6x2 Doppelweck) - Detection of the dough pieces via light barrier - User-friendly control cabinet above the Attachment - User interface. Touch Screen - Incl. frame for paper support - Working direction: from left to right

Doppler and scattering station Task: Round-rolled pieces of dough should be doubled and then sprinkled Solution: The round-rolled pieces of dough are fed by a roller flattened and then run through a Immersion bath. After the immersion bath, the first piece tilted by 180°, the next one is tilted to the first Piece tipped on it. After that, the two pieces drive and are sprinkled from above. After sprinkling, another printing roller follows, which, on the one hand, attach the pieces of dough to each other and on the other hand, the sprinkling presses on the dough. Description: Flattening: Full-surface tape with above, height-adjustable roller. Roller driven. Humidification: Water bath with adjustable diving depth.

Horizontal turning machine manufactured in 2019. This SCHAUBLIN 102Mi W25 features a W25 spindle nose and an integrated motor headstock. It includes a pneumatic clamping device and a Tripan-111S quick-change tool holder system. The machine is equipped with a 3-jaw chuck and a tailstock with a rotating center. If you are looking to get high-quality turning capabilities, consider the SCHAUBLIN 102Mi W25 machine we have for sale. Contact us for further details.

spindle diameter: 140 mm x-travel: 6000 mm y-travel: 2500 mm z-travel: 800 mm w- away: 700 mm rapid traverse: 10 m/min spindle taper ISO: 50 chip conveyor: control: Heidenhain ITNC 430 Plate area: 3500x2500 mm rotary table:: Rottler type: DVT200/2500 30NC 2000 Table dimensions: 2500x2000 mm table load: 30 t table travel: 700 mm : 360 ° T-slot - width: 28/50 mm T-slot - distance: 170 mm number of T-slots: 11 angular milling head: Radial face slide: 680 mm : 170 mm spindle speed:: 1600 UPM The control system was converted from an iTNC 430 to a Heidenhain in 1998. 60 tool positions in the magazine 2 controlled rotary tables - 1250 mm x 1250 mm, 1600 mm x 1250 mm - pendulum machining possible - table load approx. 12.5 t SK 50 chuck Various accessories available Video: https://www.youtube.com/watch?v=XYAtKuGQ578 The machine was completely overhauled in December 2015The tech. Data are manuf ...

4-axis robot: 3 axes are driven by servo motors (electric): X, Y-telescopic, Z; Axis C - pneumatic Strokes in axes: X-900, Y-1400, Z-2500 Touch control panel The safety package for robots Robot with adapter, protective housing

Robot 4-osiowy: osie X, Y, Z, napędzane serwomotorami (elektryczne); oś C Przejazdy w osiach: X-440, Y-800, Z-1250 Waga: 185 kg Podstawa robota (adapter), klatka bezpieczeństwa

Blasting machine Wheelabrator (Czech Republic) HW12-16, year of construction 2021, fir tree plant, interchangeable system

Manufacturer:Wille Geotechnik Type of Machine : Soil Triaxial test system Year of Manufacture: 2023 Warranty: Valid until June 2026 Load Frame - Model: Universal table-top load frame UL-50 - Maximum force: 50 kN - Spindle stroke: 100 mm - Feed rate stepless: less than 0.00001 to 60 mm/min - Integrated analogue ports: 6 - Test space height: 1000 mm - Test space width: 360 mm - Dimensions W x D x H: approx. 550 x 556 x 1728 mm - Weight: approx. 130 kg - PC interface: Fast Ethernet RJ45 - Supply voltage: 115/230 V, 50/60 Hz - Controller: Siemens industrial controller Triaxial Cell - Model: Triaxial cell with external rods, specimen diameter up to 100 mm, 2 MPa - Max. confining pressure: 2000 kPa - Max. axial load: 50 kN - Max. sample size: 100 x 200 mm diameter - Approx. dimensions: 420 x 650 mm diameter - Weight: 18 kg - Transparent polymer cylinder reinforced with carbon fibre stri ...