w 100a used for sale

Horizontal turning machine manufactured in 2008. This Weiler E50x2000 features a center distance of 2000 mm and a swing over bed of 570 mm. It has a spindle bore of 83 mm and a maximum torque at the spindle of 1600 Nm. Fully overhauled in 2026, it includes significant upgrades for enhanced performance. If you are looking to get high-quality turning capabilities, consider the Weiler E50x2000 machine we have for sale. Contact us for further details.

faceplate diameter: 4.000 mm travel -x axis: 4.500 mm travel -z axis: 600 mm control: Siemens Sinumerik 840D-sl feed range: 0 - 8.000 mm/min turning speeds: 1) 0,7 - 5,6 U/min turning speeds: 2) 2,8 - 22,4 U/min turning speeds: 2,1 - 56 U/min tool taper: Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Wolf Power Systems Model: GTK 50E0 Year of Manufacture: 2021 Type of Machine : CHP UNIT Condition : Never used, never even connected CE Certified: Yes Technical Specifications • Engine Type: Hoeckle HMG 434 S • Generator Type: Marelli MXB-E 225 MA/4 • Fuel: Natural Gas H (Erdgas H) • Electrical Output: 50 kW • Thermal Output: 90 kW • Power Consumption: 146 kW • Gas connection pressure range: 25 to 60 mbar • Maximum operating pressure: 4 bar • Maximum coolant inlet temperature: 90 degrees C • Rated voltage: 400 VAC 3PH 50Hz • Supply fuse: 100 A • Protection class DIN VDE 0470: IP 22 Find more here - / Contact us at -

This 3-axis WEMAS VZ 750 CENTURY was manufactured in 2001. It features an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a Heidenhain TNC 426 control unit, an electronic handwheel, and a tool changer. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 750 CENTURY vertical machining centre we have for sale. Contact us for further details.

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. control: Memory-Funktion Weinig Powermat 500 with grooved table ---------------------------------- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----------------------------------------------- Motor with ...

Size: 920×1300 mm Equipments: Maximum sheet size 920×1300 mm, minimum size 560×1300 mm opening width within frame 920×1310 mm, maximum die size 910×1300 mm maximum die-cutting area 900×1300 mm, maximum gripping edge = 16 mm, minimum gripping edge = 8 mm maximum card thickness 3 mm (also with micro-flute and flute zero), maximum compressed air pressure 500 t, maximum stroke rate 5500/h infeed stack height 1100 mm, outfeed stack height 1100 mm, main motor power 18 kW, main motor power consumption 17 kW, speed 5500 strokes/h. Machine dimensions (L x W x H): 6835 mm x 3580 mm x 2690 mm. Total weight of the machine including the insert approx. 30 t, weight of the machine without the insert approx. 29 t

Used 5-stage evaporation station by Gea Wiegand. Year of construction 1986. Capacity 10000 L/h. Reconditioned in 2008 with exchangers + computer control by B&P. Also added in the same year was an aroma column built by B&P and designed by Dipl Ing K.H. Volp.

Key data: 130 mm

Stock# UG6397 Used line for WPC (wood plastic composite) acoustic panels production. Line had been working on acustic panels with width 600 mm x length up to 6 m. Maximal possible width up to 900 mm. Line consist of: - Twin screw, co-rotating extruder by Weber (D) model DS 13.27. Machine has twin screws, each with diameter 130 mm. Working length LD = 27. Extruder is driven by el. motor 145 kW. Barrel has 12 heating zones, each with el. heaters 5.5 kW. Includes Transi-Tec mixing and dosing device and unused spare barrel. - Calibrating table by Techno-Plast with 4 pcs of vacuum pumps (each power 4 kW) and one blower with power 1.1 kW. - Pull-off with a saw by Techno-Plast, driven with motor 5.7 kW - Profile collection table - Vacuum pump (Busch) - ONI water cooling exchanger Line new in 2010.

Key data: 28000 KW, 13000 V

Technical details are as follows: Engine Model: W18V32 Generator Maker: ABB Output: 7,050kWe x 720 rpm Frequency & Voltage: 60Hz & 13,800V Year of Production: 2001 Running Hours: Approx. 25,000 hours Fuel Oil: Diesel Oil, HFO The scope of supply is as follows: Generators: 4 units Control Units: Complete set for all 4 units Oil Purifier Units: 4 units, each with an oil tank Compressor Tanks and Compressors

Weima Type: ZM 30 Motor 2x 11kW Hours: 1243 Feed size at the bottom approx. 500x450mm Hopper at the top approx. 1m x 1.2m Transport Dimensions Height 2m, Width 1.6m, Depth 1.6m Weight approx. 1400kg We have been engaged in the sale of woodworking machines for 25 years. Our machines are 100% inspected before sale, and we attach great importance to the satisfaction of our customers. You are welcome to visit and try out the machines in advance to convince yourself of their quality and functionality. If you have any additional questions, please feel free to give us a quick call or send us a message. Net price plus VAT

Absolutely new belt dryer make New Eco Tec Woody 500-100-1.0 SP, built in 2019. Very well preserved, as good as new facility. Immediately available. Suitable for drying fines up to 1.5 to/h. Input moisture up to 50%. Water evaporation up to 500 kg/h! Heating medium warm air 90°C to 110°C. Takeover possible immediately!

Key data: 3915 KW, 6000 V

Wartsila 3.9 MW/50Hz Gas Generating Set 12V34SG with CHP Auxiliaries This power plant was built by Wärtsilä at the end of 2010 and commissioned in 2011 as a turnkey project, equipped with a heat recovery system for 10 bar steam production. The plant operates on standard natural gas supplied via a local pipeline. It was in operation until 2021, accumulating a total of 43,767 running hours before being shut down. The complete installation includes a step-up transformer, lube oil system, control panels, synchronizer panel, UPS systems, operator monitors, MCC, start-up system, air compressors, HRCS for 10 bar steam, exhaust system, 6 kV vacuum breaker with synchronization, as well as all manuals and technical drawings. The plant remains installed, with electrical power still connected to all devices. All scheduled maintenance was performed by Wärtsilä Service, with the last maj ...

Press company Walter SL 60t (beverage vending machine) 1991 Punching machine Peddinghaus 1997 Longitudinal seam welding machine Weil 2007 NC Milling Machine FP-4MA N/A Lid CNC Milling Machine DMC63-V N/A Lid Maho Automatic Circular Saw KKS 450 R 2008 Kaltenbach MAG welding machine Fronius Vario Star Unknown Fronius MAG welding machine Fronius Vario Star Unknown Fronius MAG welding machine Fronius Vario Synergic Unknown Fronius MAG welding machine Fronius Vario Star Unknown Fronius MAG welding machine Fronius Vario Synergic Unknown Fronius

Technical data: X-axis 2,000 mm Y-axis 2,500 mm Z-axis 1,250 mm W-axis 800 mm Spindle power 37 kW Spindle speed 1.6 – 1,500 rpm. Tool holder SK 50 Control CNC HEIDENHAIN TNC415 Table dimensions 1,800 x 1,600 mm max. table load 8 to B-axis 360° Weight approx. 30,000 kg Motor fan new Simodrive modules new 2024 November SK 50 Cone Reground 2024 New cover X axis in 2024 Y scale 2023 overtaken by Heidenhain

Root End Reducer B&Z Type WRP SO Well-preserved fully functional root end reducer made by Baljer and Zembrod. Built in 2004. Complete with control, disposal scraper conveyor straight approx. 8.0 m and ascending approx. 6.0 m. Including hydraulic log ejector. The hydraulic power unit with 15 kW is included in the scope of delivery, we also have the remote control for the control of e.g. sorting trolleys. Complete steel substructure. Length of milling shaft 1,380 mm. Drive of milling shaft with 75 KW motor. Feed motor slewing gear with 4.5 kW. Drive scraper conveyor with 3.0 kW.

- with sign, - Pratzenabstützung, - Operating hours: 10,400 h

Colors: 7 authorized (2x spots + white), External ESKO-RIP IN-50, Accessories as far as available., Total: approx. 146 million prints, The machine is currently in operational state.

single-sided direct postforming machine Brand: Wehrmann Type: Combima /K/I/R80/1260/V Example offer direct postforming machine Varied using for doors, worktops, furniture parts, curved caravan fronts, etc. Technical data: A single-sided throughfeed postforming machine for the postforming and postfolding process, for processing curved workpieces in caravan construction. For workpieces to be profiled made of wood/wood materials with laminate (CPL,HPL) as surface material. The laminate protruding for the postforming process is located in the machine on the underside of the workpiece and is formed from the bottom to the top. Technical data Machine Constant workpiece projection from the chain conveyor: from approx. 35 mm Throughput width min.: 130 mm ( only for straight parts ) Workpiece length in feed direction min.: 1,000 mm Basic height: 940 mm (upper edge o ...

Net capacity: 20,000l, gross capacity: 21,610l, operating temperature: -10 to 100°C, operating overpressure: -0.1 to 0.6bar, material: 1.4571, medium density: 1.3t/m³, height: 4958mm, diameter: 2850mm, empty weight: 2.9t, weight of insulation, platform, access ladder, pipe holder, agitator: 700kg, minimum installation weight: 3.6t. With complete documentation, sale including insulation. An on-site inspection is possible, fully cleaned and ready for operation.

Available: 6 gas generator sets Wärtsilä type 16V175SG2, mounted on skids, without control panels. Year: 1996 Service hours: 26,000 h Speed: 1500 rpm – 50 Hz Alternators: Stamford Please feel free to contact us for further information (price, photos, availability).

Key data: 8000 KW

Diesel Generators Wartsila 2 x 12V32 HFO – 2 x 4.0 MW/ 50Hz Deliver proven, industrial-grade power with these Wartsila 12V32 medium-speed diesel generator sets, currently available in standby condition. Equipment is maintained by the book and thus in good operational condition. Last thorough 48k Service was carried out in 2016 by Wartsila Service for both engines and since then, the plant has been operated about 20’000 hours. Designed for continuous and prime power duty, these units offer a good reliability, fuel flexibility, and choiceed auxiliaries — making them ideal for industrial plants, captive power projects, utilities, as a base load or back-up electric power generation. These units are priced for sale. Contact us today to receive commercial valuation, scope clarification, and inspection arrangements for this 8 MW Wartsila power solution Technical Characteristics  ...

AKOMAG Combi 175-18 Semi-Automatic Bottle Washer (150–500 bph) AKOMAG Combi 175-18 is a compact, semi-automatic bottle washer designed for efficient internal and external cleaning of glass beverage bottles, including wine, beer, water, and soft drinks. Ideal for small to medium production volumes, it delivers a throughput of 150–500 bottles per hour, depending on bottle size, shape, and label removal requirements. Built entirely from stainless steel, the machine features a space-saving, modular design with options for sanitization and auxiliary modules. It uses a heated NaOH water solution (up to 70 °C) with low-pressure steam to ensure thorough washing and effective label removal. Automated rinsing and washing processes are combined with manual bottle loading and unloading for operational flexibility. Engineered for low water and energy consumption, the AKOMAG Combi 175-18 o ...

Key data: 19560 KW, 11000 V

Multifuel 19.5 MW Wartsila CHP Power Plant with 2 x 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power and 9.5 tons/hour of saturated steam at 10 bar. In addition, the delivery includes an ...

Key data: 53500 KW, 11000 V

Diesel Power Plant Wartsila 50 MW with 6 x 20V32 HFO Generator Set The diesel power plant has a total installed capacity of 53.5 MW and comprises six identical Wartsila 20V32 generator sets, each rated at 8.9 MWe (50 Hz). The generating sets are equipped with asynchronous AKV alternators and are designed to operate on heavy fuel oil (HFO). All necessary auxiliary systems are included. Each engine operates at 750 rpm and is turbocharged with intercooling. The engines are mounted on base frames that also function as wet oil sumps. The generator sets have accumulated approximately 35,000 total operating hours and have been maintained in accordance with Wartsila’s service guidelines. Maintenance has been performed by Wartsila Service and a certified service provider specializing in Wartsila engines. Engine cooling is provided by a radiator-based cooling system with two separate co ...

Steam Boiler Plant 120 MW / 30 bar Saturated Steam This steam boiler plant is in good condition and designed to produce 54 kg/sec of saturated steam at 30 bar for industrial processes. The boiler features a membrane wall construction and is supported from the bottom. It is equipped with four burners located at the top of the boiler: two fired by natural gas and two by light fuel oil, each with a capacity of 30 MW. The firebox base and lower manifold are protected by refractory tiles. The flue gas side of the boiler operates under positive pressure. The plant includes two 100% capacity combustion air fans; there is no exhaust gas fan. The equipment has been meticulously maintained and upgraded throughout its operational life, meeting the most stringent modern quality standards. The steam boiler operates on natural water circulation, with heating surfaces arranged across two draughts ...

Potence pour révision de centrifugeuse décanteur Alfa Laval

The machine is still in use and will be available from around 15 May. We are always happy to answer any questions you may have.

10432025 Wild Goose Meheen Glass Bottle Filling Line – 2,400 bph (2017) Complete Wild Goose Meheen glass bottle filling system suitable for beer, cider, cocktails, carbonated and non-carbonated soft drinks, kombucha, wine, and other beverages. Filler is in top condition having only about 50 operating hours The nominal capacity is up to 2,400 bottles per hour. The system comprises a Meheen counter-pressure filler with six filling nozzles, crown cap sorter, rinser, two bottle cradling plates for different bottle sizes, ML labeller, inkjet date coder, and a large hopper for crown cap feeding. All Wild Goose Meheen filling systems operate with fully pneumatic processes, with no electric motors, gears, or bearings in the filling mechanism, ensuring high durability and low annual maintenance requirements. The counter-pressure filler is equipped with CO₂ double pre-evacuation to ...

CNC processing center manufactured in 1997. This WEINIG / DIMTER Unicontrol 10 features a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It includes a powerful cross-cut saw with a spindle speed of up to 3,000 rpm and a tenoning spindle motor power of 15 kW. If you are looking to get high-quality CNC processing capabilities, consider the WEINIG / DIMTER Unicontrol 10 machine we have for sale. Contact us for further details.

Krones Wet Aseptic PET Bottle Filling Line – 36,000 bph (500 ml) The Krones wet aseptic filling line is designed for the production of carbonated and still beverages, including soft drinks and juices, using a wet aseptic process. The line supports flexible bottle formats of 0.33 L, 0.5 L, 1.0 L, and 1.5 L, with a maximum output of 36,000 bottles per hour at the 0.5 L format. The system is compatible with 28 mm closures, including PCO 1810 flat caps and sport caps, ensuring high hygiene standards and reliable, high-quality filling performance. The line is complete and was originally installed by Krones in 2009. In 2016, the line was upgraded with a KHS Blowmax stretch blow molder and a Krones Modulpal palletizer. The line has been continuously serviced by Krones and is currently in very good condition. Main Characteristics: Manufacturer Krones AG and KHS Manufacturing yea ...

CNC horizontal boring machine Type: WHN 13.8 A-CNC Manufacturer: TOS Year: 1979 Overhaul: 2007 Control: Heidenhain TNC 530 Spindle diameter: 130 mm Spindle taper: ISO 50 Main motor power: 37 kW X: 3500 mm Y: 2000 mm Z: 1250 mm W: 800 mm Table: 1800 x 2200 mm Max table load: 12000 kg Machine weight: 36000 kg In good condition, fully functional Find more here - / Contact us at -

A professionally dismantled and preserved steam boiler system with a Loos steam boiler and Weishaupt burner is available. 1) Loos UL steam boiler, year of construction: 1991, max. steam output: 6000kg/h, max. operating overpressure: 16bar. 2) Dual fuel burner Weishaupt Monarch RGL 60/2-A, year of construction: 1991, version: ZM, output range: 800kW-6600kW, gas type: N, gas category: I, gas setting pressure range: 30mbar-170mbar, oil throughput range: 120kg/h-556kg/h. Documentation available. An on-site inspection is possible.

- Closed press basket, steel, coated - Tank capacity: 30hl - Last use: 2025 harvest - Membrane: PVC, 2018 - Juice pan : Large stainless steel tub, Version «Drawer with suspension, connection DIN - DN50 - Central filling - Without feet, with wheels - Machine in working condition Dimensions: - Length: 4500 mm - Width: 1900 mm - Height: 1600 mm (without wheels)

Peter Wolters AC 1000 F Double Sides Fine Grinding Machine The Peter Wolters AC 1000 F is a highly flexible double-sided batch processing machine with pneumatic loading system. Alternatively, the machine can be supplemented with a manual and fully automatic loading system. The swivel functionality enables optimal ergonomic access for the machine operator. Designed for high-precision series production of workpieces Optimum surface quality, flatness, thickness tolerance and plane parallelism with the tightest tolerances on the workpiece Broad portfolio of options to enable complex processes. Phone +49176 21 834 834

WEIMA WLK 14P SINGLE SHAFT SHREDDER, previously used for PET bottles, industrial scraos from I.M., rotor width 1.400 mm Ø 368 mm., n.90 rpm, n.82 knives, Feeding room 1.400 x 1.700 mm., horizontal hydraulic ram, 75 kW drive, Screen 90 mm.Ø holes, Throughput rate ca.600 kg depending on material and feeding rate, Feeding hopper ca 600x 578 mm + 1000 x 78 mm inlet, The machine comes complete with extraction belt, magnetic separator, installed power - used power in work: about 60-65% : 75 kW, availability: 1 month, working width: 1.400 mm., options available: different screen size, conditions: totally reconditioned with warranty

This 6-axis AMADA Wasino JJ3 was manufactured in 2007. It features a twin spindle, twin turret turning cell with a maximum spindle speed of 4000 rpm and a chuck size of 8”. The machine is designed for high-volume production with automatic loading and unloading capabilities. If you are looking to get high-quality turning capabilities, consider the AMADA Wasino JJ3 horizontal turning machine we have for sale. Contact us for further details.

General SKU068Z267 MakeWila Maschinenbau Sollstedt TypeHOGD-M-750 LTR No.0654 Year of construction1995 Mounted on legscheck Main Features MaterialStainless steel Volume750 Ltr. Motor15 KW Specified Features - Pre-mixer MaterialStainless steel 1.4301 (304) Pre-mixer(1x) Fountain mixercheck Capacity750 Ltr Vessel diameter1400mm Cylindrical height600mm Conical height800mm Inletdia. 300mm With inspection valve480x560mm Outletdia. 150mm Motor15,0 KW + 4,0 KW (Mischwelle/Mischzylinder) Information LocationBarneveld With switchcheck Floorspace1,9x1,6 M Total height3,4 M Weight1800 KGDiscountPre-mixersWila SollstedtDiscountMixers > Pre-mixersBrand > Wila Sollstedt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barne ...

General SKU060Y349 MakeHermann Waldner GmbH Wangen No.W-3188 Year of construction1994 LocationBarneveld Specified Features - Stirring vessel Material finishPolished inside Pressure Working pressure1 Bar Working pressure jacket2.5 Bar Main Features MaterialStainless steel Volume568 Ltr. Motor0.88 KW Stirring vessels MaterialStainless steel 1.4435 (316L) Closed stirring vessel(1x) Capacity568 Ltr Vessel sizesdia. 800x900mm Dished bottomcheck Dished top sidecheck Manholedia. 250mm Top connections3x dia.35mm + 3x dia.45mm + dia. 60mm Outletdia. 50mm With jacket(60 Ltr) Max. temperature90 Degr. C. With propellor stirrermake Ekato, type EM-040 Motor0,55/0,88 KW, 400 Volt Speed mixing shaft498/975 Rpm Information Floorspace1,6x1,6 M Total height2,4 M Extra Specifications- Equipped with 3 CIP nozzles DiscountStirring vesselsHermann WaldnerDiscountStirring vessel ...

Equipment Included - Wurster and Dietz OPTIMAT swing-stroke full gate saw, built circa 1970 - Splitting wedge - Cross conveyor - Roller conveyor - Sharpening machine - Setter - Wurster and Dietz Edge Saw FR 7, built circa 1965 Find more here - / Contact us at -

General SKU048W209 MakeWestfalia TypeSAK-20036 No.1643130 Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Motor30 KW Specified Features - Separator Separator(1x) Motor30,0 KW, 380 Volt Max. rotor speed4500 Rpm MaterialStainless steel Information Floorspace1,8x1,5 M Total height1,5 M Weight2000 KGDiscountSeparatorsWestfaliaDiscountCentrifuges > SeparatorsBrand > Westfalia What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

A modular bucket filling and lidding system Wittmann Robot Systeme is available. Components: bucket stack feeding, bucket stack transfer unit, bucket singulation, rake and filling, stopper, lid feeding, lidding, lid inspection and rotation for the further conveying processes. Number of formats: 6, format distribution round/rectangular, round bucket diameter: 226mm, round bucket height: 194mm, min. rectangular bucket dimensions X/Y/Z: 195mm/299mm/170mm, max. rectangular bucket dimensions X/Y/Z: 302mm/415mm/220mm, bucket volume: 5l/6l/10l/11l/16l. Including the corresponding conveyor units and motors. Documentation available. An on-site inspection is possible.

Rod line consisting of: Feeding system with agitated hopper Werner & Pfleiderer extruder ZSK model Ø53x33D twin-screw Manual filter changer, CFM75 model 10-strand + 6-strand rod granulation head TI400/4 4 M immersion tank Periplast dryer Granulator Screening

WMW MODUL ZFWZ 160/3 gear hobbing machine was built in 1971 in the GDR by VEB Werkzeugmaschinenkombinat 7. Oktober” Berlin. The machine is used in plants manufacturing extremely precise drive components for, among others, the automotive, aerospace and machinery industries. It enables the efficient machining of spur and worm gears with a maximum external diameter of 160 mm. The machining process is performed by means of a spindle with a cutter with a maximum diameter of 110 mm. The spindle of the MODUL ZFWZ 160X3 machine moves along the contour of the workpiece, cutting the material along its entire circumference. Using this method, it is possible to achieve the desired shapes and teeth finish with the highest accuracy. The WMW MODUL ZFWZ gear hobbing machine weighs 3000 kg. Technical specifications of the WMW MODUL ZFWZ 160/3 gear hobbing machine General data - maximum external di ...

Robot type : W643 – 269 Control N° : CNC 6 – 2617 Year : 2004 Removal X – Axis : 1200 mm SER Standard Vertical Y – Axis : 2600 mm SER Standard Horizontal Z – Axis : 4500 mm SER Standard Placing C – Axis : 60NM-P 90 Rotation A – Axis : No Rotation B – Axis : 15,0NM-MOT 0-270

Deck oven W&P, type: Matador -In very good condition- - Number of stoves: 5 - Baking surface: 15 m² - Lower both stoves extendable - Burner: gas or oil as desired - Very good condition, everything technically checked, ready for immediate use Visits and test runs are possible by arrangement. Delivery and assembly on request. Overhaul possible.

grinding diameter: 100 mm grinding length: 400 mm centre height: 100 mm z-axis: 425 mm table speed -stepless-: 0,05 - 5,00 m/min workpiece spindle head rotation speed: 90 - 1.000 U / min. grinding head swivelling: -2 - +30 Grad tailstock quill taper MT: 3 grinding wheel speeds: 1.800 / 2.000 U/min grinding motor: 3,70 kW dimensions of grinding wheel: 350 x 50 x 127 mm total power requirement: 7,00 kW weight of the machine ca.: 2,50 t dimensions of the machine ca.: 3,00 x 2,50 x H2,20 m With 2-axis digital display FAGOR, coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal turning machine manufactured in 1999. This Weiler E35 D features a Siemens Sinumerik 810D control with Weiler D1 user software and a 12.1-inch TFT color flat screen. It includes a coolant unit with a flow rate of 30 l/min and a tool holder for quick-change operations. If you are looking to get high-quality turning capabilities, consider the Weiler E35 D machine we have for sale. Contact us for further details.

turning diameter: 400 mm turning length: 1000 mm swing diameter over bed slide: 400 mm turning diameter over slide: 225 mm bed width: 433 mm spindle bore: 56 mm total power requirement: 7,4 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 2,5 x 0,9 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.