w 100 used for sale

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

Tool holder, milling holder, milling tool -Number: 2x SK45 holders -1x recording inside: Ø 28 mm -1x recording outside: Ø 40 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 4.5 kg

Gear motor, electric motor -Speed: 13 rpm -Power: 0.11 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 33 -Number: 1x geared motors available -Price: per piece -Dimensions: 380/170/H180 mm -Weight: 17.5 kg

Gear motor, electric motor, three-phase motor -Speed: 153 rpm -Power: 0.18 kW -Voltage: 220 V -Construction: B3 angle -Shaft diameter: Ø 12 mm -Protection class: IP 44 -Number: 1x engine available -Price: per piece -Dimensions: 290/125/H180 mm -Weight: 5.7 kg

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Number: 2x spindle tools -Adjustment: SK50 -1x shaft size: Ø 50 x 250 mm -1x shaft size: Ø 63 x 200 mm -Price: complete -Weight: 13.2 kg

Key data: 2500 mm, 1000 mm, 80 mm

Weeke BHX 500 with hedgehog buffer in the inlet Hedgehog buffer with 30 buffer places, length overall: 5700 mm Effective width: 2000 mm Manually movable Weeke machining center with one machining support at the top and one at the bottom Insertion table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS min. workpiece length: 200 mm max. workpiece length: 2500 mm min. workpiece width: 70 mm max. workpiece width: 1000 mm min. workpiece thickness: 4 mm max. workpiece thickness: 80 mm max. workpiece stacking: 2 pcs. Machine Configuration: 2V32 HIGH SPEED 7500 Vertical drilling unit arranged in the upper and lower machining support, each with 32 drilling spindles (individually controllable with variable speed range). 2H8X/2Y Horizontal drilling unit arranged in the upper and lower processing support with 10 over Drill spindles can be called up individu ...

Tool holder, milling holder, milling tool -Adjustment: SK50 -Test pin: 80 x 160 mm -Number: 1x recordings available -suitable for: tool changer -Price: per piece -Weight: 9 kg/piece

Gear motor, electric motor -Speed: 61 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Price: per piece -Number: 8x available -Dimensions: 405/140/H180 mm -Weight: 14 kg

Recon Part Number: 300323 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Gear motor, electric motor -Speed: 62 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Dimensions: 430/160/H200 mm -Weight: 16.7 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: WMW -Type: size 25 -Weight: 3 kg

Tool holder, milling holder, milling tool -Adjustment: SK50 -Test pin: 50 x 125 mm -Number: 1x recordings available -Price: per piece -Weight: 4.6 kg/piece

Tool holder, milling holder, milling tool -Adjustment: SK50 -Test pin with tip: 40 x 143 mm -Number: 1x recordings available -Price: per piece -Weight: 3.7 kg/piece

Recon Part Number: 301111 Completely standard size Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Number: 5x spindle tools -Adjustment: SK50 -different shaft sizes: 22/25/30/40 mm -Price: complete -Weight: 19.2 kg

Gear motor, electric motor -Speed: 1.5 rpm -Power: 0.05 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 33 -Dimensions: 305/160/H130 mm -Weight: 5.2 kg

Recon Part Number: A301123 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Gear motor, electric motor, electric gear motor -Speed: 304 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 44 -Dimensions: 380/200/H190 mm -Weight: 15.7 kg

Recon Part Number: CA302180 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Tool trolley for bending tool, die, upper knife, upper tool, straight tool -Tool trolley for the: Tool for a press brake -with several compartments -Dimensions: 1165/720/H1000 mm -Weight: 208 kg

Thread cutting chuck, thread chuck, tap chuck -Handover in its current condition as inspected -Thread cutting chuck without collets -with slip clutch -Cutting capacity: M24-M64 -Recording: MK5 -Quantity: 1x threading chuck available -Weight: 13 kg

SPECIFICATIONS: Workpiece length mm: 200 - 3000 Width of the workpiece mm: 20 - 200 Workpiece thickness mm: 30 - 120 Fence length right mm: 1500 HORIZONTAL DRILLING: Drill bit diameter mm: 8 Drilling depth mm: 60 Dowel size mm: 8 x 80 with glue addition Installed power kW: 6 Uses HN - HSS Drill Bits

Shell end mills, shell mills, milling cutters -Number: 8 pieces finishing cutter/roughing cutter -Socket: Ø 40 mm -Various diameters: 120-125 mm -Different producers -Price: complete -Weight: 22 kg

Shell end mills, shell mills, milling cutters -Number: 18 pieces finishing cutter/roughing cutter -Socket: Ø 40 mm -Various diameters: 100-125 mm -Different producers -Price: complete -Weight: 57.6 kg

Boekels EWK 1500 PLUS WS1,25kSD inline checkweigher with reject device, weight range up to 1500 g (working weight up to 1250 g), calibration value e=0.2 g, accuracy +/- 0.2 g, belt width approx. 150 mm, length of infeed belt approx. 300 mm, length of outfeed belt approx. 300 mm, length of weigh cell approx. 300 mm, belt speed up to. 0.5m/s, capacity up to 100 weighings per minute, electrics 230V/50Hz, connected load 600 VA, machine floor space approx. 1050 x 1020 mm (WxD), machine height approx. 1700 mm, machine net weight approx. 245 kg

Shell end mills, shell mills, milling cutters -Number: 9 pieces finishing cutter/roughing cutter -Socket: Ø 32 mm -Various diameters: 76-100 mm -Different producers -Price: complete -Weight: 13.3 kg

Key data: 9000 , 11000

Wartsila 20V34SG Gas Power plant 8.7 Mw 50 Hz 11kV 8.7 Mw at 750 RPM 2004 made in good condition Available in Turkey

Shell end mills, shell mills, milling cutters -Number: 12 pieces finishing cutter/roughing cutter -Socket: Ø 32 mm -Various diameters: 75-110 mm -Different producers -Price: complete -Weight: 21.3 kg

Shell end mills, shell mills, milling cutters -Number: 28 pieces finishing cutter/roughing cutter -Socket: Ø 22 mm -Various diameters: 49-80 mm -Different producers -Price: complete -Weight: 10.5 kg

Weibert SB 4132SM Box column drill Technical Specification Motor power - W 1500/2200 400V Drilling capacity in mm 32 Spindle stroke in mm 120 Drilling spindle holder MK4 / MT4 Drilling spindle speed in min-1 (24) 60-3480 Column diameter in mm 90 / 2.5 Gross weight in kg 125 GMHM SB4132SM

Power: 650 Watt tank capacity: 5,5 l length: 515 mm width: 430 mm height: 825 mm weight of the machine ca.: 36 Kg Professional 650 watt construction dryer Recommended room size 40 - 50 m², height max. 2.6 m Sound pressure level approx. 52dB Dehumidification capacity 28 L/D - 51 L/D The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Geared motor, electric motor, three-phase motor -Speed: 64 rpm -Power: 2.2 kW -Design: B3 -Shaft diameter: Ø 60 mm -Protection class: IP 33 -Dimensions: 680/295/H420 mm -Weight: 103 kg

High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Grinding spindle: for lathe -Electrically operated -Max. Speed: 6900 rpm -Admission: M42 x 1.5 mm -Dimensions: 600/390/H355 mm -Weight: 64 kg

Minimum quantity lubrication, coolant lubrication device, cooling spray device, oil spray device -pneumatic: driven -Tripping: electrical -Oilcontainer -Dimensions: 200/230/H375 mm -Weight: 2 kg

Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for tool grinder -Take: SK40 -Tip height: 100 mm -swiveling -Dimensions: 640/260/H290 mm -Weight: 48 kg

High Pressure unit Hammelmann HDP 504 Year of construction 2021 Operating pressure 2200 bar Flow rate 122 ltr Power 490 kW Operating hours 880 h engine CAT C 18, Level 5 TIER 4F Power 565 kW in Truck, Used Truck Scania 164 L V8, 480 YoM 2004 Power 353 kW 802,500 km

Refurbished and Used Cylinder Heads

Gear motor, electric motor -Speed: 15 rpm -Power: 0.18 kW -Construction: B3 -Brake -Diameter shaft: Ø 25 mm -Protection class: IP 33 -Dimensions: 450/200/H200 mm -Weight: 23 kg

Tool holder, extension -Shaft mount on both sides: Ø 71 mm -Drawing with the pictures -Transport dimensions: 1650/800/H450 mm -Weight: 370 kg

Frequency converter, frequency transformer, converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Power: 5 kW -Output: 42 V -Frequency: 200 Hz -Dimensions: 1160/600/H740 mm -Weight: 88 kg

Frequency converters, frequency converters, converters for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Power: 2.8 kW -Output: 42 V -Frequency: 200 Hz -Dimensions: 1160/600/H720 mm -Weight: 74 kg

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Number: 11x spindle tools -Take: SK40 -partly with: CNC pull studs -different shaft sizes: 25-180 mm -Price: complete -Weight: 42 kg

Radial Drilling WAGNER type PRC 35 Spindle CM4 Spindle exit: 220 mm Spindle speed: from 32 to 2500 RPM Arm/trolley travel: 700 mm Year of construction: 1989 Column diameter: Ø 230 mm Max height table/spindle nose: 1000 mm (table in high position) Automatic descent Hydraulic locking of the column rotation + trolley Mechanical locking of the up/down Cube dimensions: L 800 x W 450 x H 450 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 1800 x 900 x 2250 mm in high position Weight: approx 2 T

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Number: 36x spindle tools -Take: SK40 -with: CNC pull studs -different shaft sizes: 30-125 mm -Price: complete -Weight: 86 kg

Gear motor, electric motor -Speed: 40 rpm -Power: 9 kW -Construction: B3 -Diameter shaft: Ø 80 mm -Protection class: IP 33 -Dimensions: 1000/385/550 mm -Weight: 260 kg

Key data: 420 mm, 250 mm, 350 mm

with Heidenhain TNC 114 digital display Tool holder ISO 40/M16 Travel X/Y/Z 420 x 250 x 350 m 12 spindle speeds from 50 - 2240 Weight approx. 900 kg Central lubrication Bellows NEW! Accuracy in: X-axis 0.005/300 mm Y-axis 0.006/250 mm Z-axis 0.01/300 mm Spindle concentricity 0.003 mm Angular accuracy 0.01/250 Spindle clearance X 0.12, Y 0.04, Spindle noise: very good Very good overall condition!

Tool holder, milling holder, milling tool -Adapter -Take: SK40 -Tool holder: MK4 -with: CNC pull studs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Number: 13x recordings available -Price: per piece -Total length: 200 mm -Weight: 1.1 kg/piece

Tool holder, milling holder, milling tool -Adapter -Take: SK40 -Tool holder: MK3 -with: CNC pull studs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Number: 22x recordings available -Price: per piece -Total length: 175 mm -Weight: 0.8 kg/piece

Tool holder, milling holder, milling tool -Adapter -Take: SK40 -Tool holder: MK2 -with: CNC pull studs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Number: 8x recordings available -Price: per piece -Total length: 155 mm -Weight: 0.8 kg/piece

Tool holder, milling holder, milling tool -Adapter -Take: SK40 -Tool holder: MK2 -with: CNC pull studs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Number: 8x recordings available -Price: per piece -Total length: 230 mm -Weight: 1.2 kg/piece