w 100 used for sale

feed under pressure: 2,7 mm/sec pressure: 100 t stroke: 400 mm table surface area: 920 x 560 mm feed down: 4,25 mm/sec feed up: 8,22 mm/sec oil pressure max. in the work cylinder: 385 bar oil volume: 26 l diameter of piston: 125 mm column daylight: 920 mm voltage: 400 V/ 50 Hz total power requirement: 4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • pressure cylinder horizontally moveable, • table can be hydraulically adjust in height, • Cylinder Ø 175 mm, piston base Ø 125 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24508 Specifications: - Load capacity 100 kg - Face plate diameter 500 mm - Passage opening 155 mm - Manual face plate infinitely variable left + right tilt - Rotational movement infinitely variable mot. Adjustable - Right + Left Rotation - E.- Footswitch for start - stop - Table height in horizontal position approx. 940 mm - 3 cheek chuck - Drive 220 V - Space requirement approx. W 750 x H 940 x D 750 mm - Weight approx. 100 kg

Welding Rotator SARAZIN type HD 100 Maxi loading capacity: 5000 KG Shelf diameter: Ø 1500 mm Shelf diameter with external extensions: Ø 2100 mm Tilting: de 0 to 135° New electrical panel with speed variator Voltage: 380 V Length: 2600 mm Width: 2200 mm Total height in height position: 1700 mm Weight: approx 4 T

ELECTRICAL SPECIFICATIONS   total power consumption: 57 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4900 mm   space requirements -front/back-: 2600 mm   total height: 2600 mm   total weight approx.: 2600 kg Washing medium: solvent-free basket/rack size     790 x  590 x  600 mm cabin dimensions    1200 x 1200 x 1200 mm useable volume       800 x  780 x  900 mm net weight of batch                200 kg Attachments: Dosing unit DOSANTEC A763-168M buffer tank 100 ltr Waste water tank 75 ltr rotating spraying cross from top rotating spraying cross from bottom Drying device (circulating air) with heat recovery 5 heating elements each 9 kW driven roller conveyor

Table dimensions: 1200 x 1200 mm table load: 10000 Kg swivelling range: 105 Grad turning speeds: 0,07 x 0,6 U/min height adjustment: 1450 - 2450 mm hollow spindle diameter: mm welding current: 1000 Ampere max. torque on the faceplate: 20000 Nm total power requirement: 12,1 kW dimensions of the machine ca.: m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protecti ...

table diameter: 2000 mm table load: 10000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,02 - 0,2 U/min height adjustment: 1450 - 2200 mm max. torque on the faceplate: 20000 Nm engine output: 1,5 / 2,0 kW welding current: 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drying container Piovan 2 x 100 L BJ 1998

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Welding Machine Type: Roll Seam Welding Machine Manufacturer: Nimak Type: NMP 7/100 Year of Make: 1971 Machine No. 71059 Rated power: 100 kVA at 50% ED Connected load: 175 kVA Primary voltage: 380V Open circuit voltage: 7.3V Sec. Str. dd/max. 8/33 kA Electrode force: 750 kp Frequency: 50 Hz up to 8.8 V at 6 ATU All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".

pressure: 100 t stroke: 400 mm daylight longitudinal/sideways: 1010 x 300 mm Motor output: 4,0 kW liter capacity: 11,0 l dayligth: 900 mm table surface area: 1010 x 560 mm feed down: 4,8 mm/sec feed up: 7,5 mm/sec weight of the machine ca.: 0,9 t dimensions: 1550 x 900 x 2450 mm High-quality hydraulic press can be operated manually or by motor. Cylinders can be moved sideways. Safety valve at cylinder end position. CE marked The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two bench coiling machines by Blume & Redecker are available. 1) AM 100, year of manufacture: 1980, max. wire diameter: 3.75mm, winding length: 600mm, max. spool diameter: 340mm. 2) AM 150, wire diameter range: 0.16mm–13.2mm, spindle distance: 80mm, center height: 300mm, swing diameter: 600mm, max. speed: 1000rpm, turning diameter: 500mm. Machine dimensions: approx. 850mm/1900mm/1350mm. An on-site inspection is possible.

Manufacturer: Zentner Systems GmbH Model: Soltec ST 100 Year of Make: 2006 Serial number: 0505 / 06 Operating voltage: 3 × 400 V Mains frequency: 50 Hz Operating power: 3 kW Operating pressure (air): 6.0 bar Design: Closed stainless steel screen washing cabin Application: Automatic cleaning of screen printing frames Particularities: – EX signs available – Integrated exhaust air / exhaust system – Compact design with its own control cabinet Location: Schierling Viewing possible by appointment.

Inv. Num. : 6169 Type: Motoman DX 100 Producer: YASKAWA Created: 2011 Parameters: Switch-on hours: 12800 h Operating hours: 6000 h Axle number: 6 Max. horizontal reach: 1717 mm Min. vertical reach: 3063 mm Maximum load: 20 kg

Exhibition machineThe Holzprofi dehumidifier HT-100 is ideal for drying wood, but the dehumidifier can also be used for drying basements, construction sites, etc. Advantages and features:- High drying performance even at low temperatures, thanks to hot gas defrosting- Good dehumidification even at low humidity- High efficiency for energy-saving operation- High-quality machine from the industrial sector, durable and suitable for many applications.- The practical control system switches the

pressure: 100 t stroke: 380 mm table surface area: 1100x424 mm dayligth: 180/750 mm distance between columns: 1100 mm diameter of piston: 90 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis Flow MACH 100-4020 was manufactured in 2021, featuring a cutting area of 4020 × 2020 mm and a cantilever structure. It includes a FlowMaster® license, Flow PASER® 4 cutting head, and a Hyplex Prime 30 pump with a maximum pressure of 4,150 bar. Ideal for abrasive waterjet cutting with less than 800 operating hours. If you are looking to get high-quality cutting capabilities, consider the Flow MACH 100-4020 machine we have for sale. Contact us for more information.

General SKU289P522 LocationBarneveld MakeVötsch Industrietechnik GmbH TypeNTSD 75/100 Main Features MaterialStainless steel Volume562 Ltr. Max.temp.280 °C Specified Features - Drying oven Drying oven:hot air sterilizer: Max. temperature280 degr.C. Number of compartments:1 Capacity562 dm3, (Total steam capacity 1,19m3) Internal width750mm Internal depth750mm Internal height1100mm Electric capacity16,2 KW Number of doors:1 + 1 (Sterile and non-Sterile side) With air circulationcheck With fancheck Motor1,1 KW, 400 Volt With racks(3x) With timercheck MaterialStainless steel 1.4301 (304) General Machine number577 81049 Year of construction1998 With switchcheck With switchgear(as is) Floorspace1,6x1,3 M Total height2,1 M Weight900 KG Extra SpecificationsRated capacity 16,2 kW, with circulating air Fan 1,1 KW, 400 VoltConsumer wastePaints & coatingsDrying ove ...

ID3691 Atlas Speedcut 100 year/Baujahr 2013 Wire saw, engine defect Wire saw, motor defect

A robot-assisted welding system from Cloos with a Kuka robot is available. Robot weight: 1155kg, control system: Qirox C Romat 520, control weight: 300kg, robot axes: 6. Documentation available. An on-site inspection is possible.

A laser cross-welding system is offered. Fiber laser 1500W water-cooled, cooling unit integrated, pallet truck guide, shielding gas supply, weld seam pressing device, remote access RMACC01 SECOMEA, strip width max.: 110mm, strip material: steel: 0.25mm-3.0mm, C steel: 0.25mm-2.5mm, aluminum: 0.25mm-2.5mm, copper: 0.20mm-1.2mm, dimensions W/H/L: 650mm/2054mm/1050mm, weight: approx. 650kg. Inspection possible by appointment.

WP Kemper V 100 Dough Divider - Weigher Product description Manufacturer: WP Emil Kemper GmbH Type: V 100 Condition: used, functional, bakery condition - please clean thoroughly before use Year of construction: 03/2013 Large plastic funnel on wheels, mobile Connected load: 3 kW / 400 V / 50 Hz / 3 PH External dimensions: W.: 73 cm, D.: 172 cm, H.: 161 cm Details see pictures.

Slotted discs, window milling tools, indexable inserts for window construction tools, wood milling tools, wood milling cutters Slotted discs, milling tool for wooden windows, wood router bit, milling head, milling tool, wood router bit, profile router bit -Manufacturer: VIVALDI, window milling tool -Outer milling cutter: Ø 172 mm -Height: 100 mm -Hole: Ø 40 mm -Speed: up to max. 6000 rpm -Weight: 8.2 kg

Slotted disks, window milling tools, indexable inserts, window construction tools, wood milling tools, wood milling cutters, Slit discs, milling tool for wooden windows, wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Manufacturer: VIVALDI, window milling tool -External milling cutter: Ø 195 mm -Height: 100 mm -Socket: Ø 40 mm -Weight: 9.1 kg

Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turning and tilting table, welding turning device, welding turning tilting table -Manufacturer: Kistler, tiltable welding turntable with mobile base - Turntable: Ø 400 mm -Speed: 0.08 to 6.3 rpm / 0.01 to 8m/min at Ø 400 mm - Direction of rotation: right/left rotation -Number: 1x available -Total dimensions: 740/580/H630 mm -Weight: 145kg

Key data: 100 t

DURENDUS 100 T Workshop Press – Single Column Press – 1,000 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 5.990 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. X-shaped T-slot table top 650 × 900 × 90 mm Pressure adjustment Lateral displacement of the press pi ...

CONTROLS   electronic controls DIMENSIONS / WEIGHTS   space requirements -left/right-: 874 mm   space requirements -front/back-: 1250 mm   total height: 1570 mm   total weight approx.: 360 kg Software update 2009

Offered is a robot-assisted laser welding system with fiber laser. Robot radius approx. 2000mm on linear axis, robot manufacturer: laser type: ytterbium fiber laser YLS, number of axes: 6 + linear travel axis, application: laser welding and surface processing, extraction: Plymovent extraction arm, control: KRC. Equipped with YLS laser source, linear axis, processing optics, Plymovent extraction, system table, control cabinet. Accessories: wire feeder: EWM Phoenix Drive 4 Rob MF. Weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 5000mm/3000mm/2800mm. Inspection possible by arrangement.

Welding Fumes Extractor CAPTAIR type 100 Year of construction: 1995 Voltage: 380 V Tubing Length: 3000 mm Width: 600 mm Depth: 500 mm Total height: 1300 mm

Secure available PERI MX 100 x 240 concreting platforms for professional formwork, concrete construction, and infrastructure projects 🚀 These proven working and concreting platforms provide additional safety and efficiency on site and are an ideal addition to existing formwork systems 🔥   The offered PERI MX 100 x 240 concreting platforms are ideally suited for concreting operations, formwork work, and creating safe working areas on wall formwork and concrete construction projects. Thanks to their robust design, they offer versatile applications and support efficient site operations ⚡   The platforms are available in 1 Star and 2 Star quality and provide a cost-effective alternative to higher-graded material. Particularly attractive for companies that rely on proven PERI formwork components while maintaining a cost-conscious purchasing strategy  ...

pressure: 100 t stroke: 380 mm table surface area: 1740 x 996 mm pressure: 258 bar ajustment speed: 7,54 mm/sec work speed: 2,47 mm/sec return speed: 9,06 mm/sec dayligth: 700 mm table height: 720 mm total power requirement: 2,2 kW weight of the machine ca.: 1685 kg - Manually movable portal - Movable cylinder manually (left - right) - Cylinder extension up to the table - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) and a Movable frame (longitudinal-running) equipped to allow easy access to all allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The qual ...

: neu : ca. 14 - 16 Wochen ab Auf : Italien : 34500 € : 658.95 € : 100 to : fix : 835 mm : 500 mm : 780 mm : 1050 mm : 25 mm/s : 10 mm/s : 4 mm/s : 800 x 600 mm : 700 x 350 mm : 1800 mm : 1000 mm : 2400 mm : 2050 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Heat exchanger Piece counter Timer Plate supports for the ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 18200 € : 349.44 € : 100 to : fix : 1500 mm : 300 mm : 1520 mm : 680 mm : 10 mm/s : 5 mm/s : 6 mm : 500x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2275 mm : 2500 kg 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand operating panel Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 16100 € : 309.12 € : 100 to : fix : 300 mm : 680 mm : 1020 mm : 8 mm/s : 5 mm/s : 10 mm/s : 500x1020 mm : 100 mm : 190 mm : 2110 mm : 1000 mm : 2350 mm : 1985 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 HAND CONTROL AND FOOT PEDAL table height adjustable according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The scope of delivery includes: 01x Depth web frame, new with push-through protection Material colour: sendzimir galvanised for column depth: 1,100 mm Total depth: 1,200 mm Total width: 850 mm Support angle: 1,200 x 100 x 50 mm Cross connector: 850 x 35 x 35 mm Material thickness: approx. 3 mm Weight/piece: approx. 12.00 kg Note: The depth web frame and the integrated Prevent push-through protection in the case of transverse and Longitudinal storage of containers, lattice boxes and pallets, the storage unit slips off. They also serve to stabilize the Pallet storage on the shelf.

: neu : ca. 14 - 16 Wochen ab Auf : Italien : 38000 € : 725.8 € : 100 to : fix : 1250 mm : 500 mm : 780 mm : 1500 mm : 25 mm/s : 10 mm/s : 4 mm/s : 1300x600 mm : 1250x400 mm : 2400 mm : 1200 mm : 2450 mm : 2450 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Heat exchanger Piece counter Timer Plate supports for the r ...

: neu : ca. 4 Monate ab Auftragse : Italien : 26500 € : 506.15 € : 100 to : horizontal verschiebbar : 500 mm : 700 mm : 1050 mm : 25 mm/s : 2 mm/s : 1900 mm : 1200 mm : 2450 mm : 1770 kg HORIZONTAL MOVABLE CYLINDER 600 MM 2 speeds control by handwheel and push button (2-hand) adjustable max. pressure manometer according to CE regulations user manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 8600 € : 165.98 € : 100 to : horizontal verschiebbar : 900 mm : 1050 mm : 1900 mm : 1000 mm : 2250 (PSS: 2400) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 100 M TL: 1 speed 4 mm/s, single-hand control with lever € 8.600,00 PSS 100 M L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 9.300,00 PSS 100 M NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 9.900,00 PSS 100 M: same as PSS 70 M NC but with stroke 500 mm € 11.400,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 17700 € : 339.84 € : 100 to : fix : 300 mm : 680 mm : 1520 mm : 8 mm/s : 5 mm/s : 10 mm/s : 500x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2350 mm : 2500 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand control table height adjustable according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 31200 € : 595.92 € : 100 to : horizontal verschiebbar : 500 mm : 700 mm : 1550 mm : 25 mm/s : 2 mm/s : 2400 mm : 1200 mm : 2450 mm : 1960 kg HORIZONTAL MOVABLE CYLINDER 1.050 MM 2 speeds control by handwheel and push button (2-hand) adjustable max. pressure manometer according to CE regulations user manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 25200 € : 481.32 € : 100 to : fix : 500 mm : 700 mm : 1050 mm : 25 mm/s : 2 mm/s : 1900 mm : 1200 mm : 2450 mm : 1300 kg 2 speeds control by handwheel and push button (2-hand) adjustable max. pressure manometer according to CE regulations user manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 380 mm table surface area: Arbeitsbreite 1100 mm pressure: 258 bar oil volume: 46 dm³ ajustment speed: 7,54 mm/sec work speed: 2,47 mm/sec return speed: 9,06 mm/sec total power requirement: 2,2 kW weight of the machine ca.: 970 kg Inner diameter of the cylinder [mm]: 220 Piston rod diameter [mm]: 90 Diameter piston crown [mm]: 120 - Movable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work The 100 ton hydraulic press is equipped with a movable cylinder (left- right) and a height-adjustable work table. Over and beyond it has a pressure regulation, 2 speeds, a joystick and a hand pump for precision pressing. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 10000 € : 193 € : 100 to : horizontal verschiebbar : 300 mm : 1570 mm : 220x160 mm : 5 mm/s : 10 mm/s : 2630 mm : 1000 mm : 2430 mm : 1600 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 8300 € : 160.19 € : 1 : 100 to : horizontal verschiebbar : 300 mm : 1070 mm : 5 mm/s : 10 mm/s : 2110 mm : 1000 mm : 2430 mm : 1500 kg demo machine / mint condition net price (price for new machine € 9.000,00) horizontally displaceable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 8900 € : 171.77 € : 100 to : fix : 300 mm : 1570 mm : 220x160 mm : 5 mm/s : 10 mm/s : 2500 mm : 1000 mm : 2200 mm : 1600 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 7307 : prompt, Zwischenverkauf v : Italien : 11400 € : 197.76 € : 1 : 10300 € : 100 to : horizontal verschiebbar : 500 mm : 900 mm : 1050 mm : 25 mm/s : 2 mm/s : 2 kW : 1900 mm : 1000 mm : 2400 mm : 1250 kg : 650 mm STROKE 500 MM 2 speeds machine table can be liftet with chains control by handwheel and push button (2-hand) adjustable max. pressure manometer according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 13200 € : 253.44 € : 100 to : horizontal verschiebbar : 300 mm : 1570 mm : 220x160 mm : 5 mm/s : 10 mm/s : 2560 mm : 1000 mm : 2480 mm : 1755 kg horizontal movable cylinder by handwheel steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 7400 € : 142.82 € : 100 to : fix : 300 mm : 1070 mm : 220x160 mm : 5 mm/s : 10 mm/s : 2050 mm : 1000 mm : 2200 mm : 1500 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 7700 € : 148.61 € : 100 to : fix : 900 mm : 1050 mm : 1900 mm : 850 mm : 2250 (PSS: 2400) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 100 TL: 1 speed 4 mm/s, single-hand control with lever € 7.700,00 PSS 100 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 8.400,00 PSS100 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 9.000,00 PSS 100: same as PSS 100 NC but with stroke 500 mm € 10.500,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 17850 € : 342.72 € : 100 to : fix : 1020 mm : 300 mm : 1020 mm : 680 mm : 9 mm/s : 5 mm/s : 10 mm/s : 6 mm : 500x1020 mm : 100 mm : 190 mm : 2110 mm : 1000 mm : 2275 mm : 2082 kg 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand panel AND FOOT PEDAL Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU291Y511 MakeCondux TypeCUM 100 No.5988 Year of construction1992 Main Features MaterialStainless steel Shell (Material)Stainless steel Specified Features - Fine Impact Mill Grindercheck Rotor sizeø 95 mm Grinding room sizeø 100 mm With sieve cagecheck Housing dimensions ø 100 mm With hoppercheck Inletø 30 mm Feeding with vibro feedercheck Motorcheck With variable speed drivecheck Speed3000/6000 rpm Fine Impact Mills MaterialStainless steel General LocationBarneveld Mounted on wheelscheck With switchcheck Floor space0,90 x 0,60 m Total height1,60 m Weight200 kgConsumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarFine Impact MillsAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharma ...

This Imulse SIP 100-4 dirty water pump is often used for sewer detour, dewatering, surface drainage and liquid transport. Operating the pump is extremely easy and is controlled by Impulses Ecomizer-Pro control system. This control system can analyze improper use and misuse of the pump, protecting itself from unnecessary wear costs and/or damage., , Some notable features:, - Running time on a full 200-liter tank: 220 hours on average, - Permeable solids: 80 mm, - Maximum capacity / maximum head: 135 m³/h / 22 meters, - Vacuum pump for priming: automatically shuts off once the pump is filled with water, , If you have any questions please feel free to contact us., , Throughput capacity: 135 m3/h, Max dirt passage: 80 mm, Motor brand: Hatz, Max. head: 22 MWK, Max dirt passage: 1800 rpm, Weight: 1700 kg, , = More information =, , General information, Year of manufacture: 2025, Applicable mat ...